Strain Engineering by Genome Mass Transfer: Efficient Chromosomal Trait Transfer Method Utilizing Donor Genomic DNA and Recipient Recombineering Hosts

Strain engineering, like cloning, is a fundamental technology used to confer new traits onto existing strains. While effective methods for trait development through gene modification within strains have been developed, methods for trait transfer between Escherichia coli strains to create complex strains are needed. We report herein the development of genome mass transfer (GMT), a broadly applicable new strain engineering methodology enabling rapid trait transfer from a donor strain into a recombineering gene-expressing recipient strain. GMT utilizes electroporation of donor chromosomal DNA into a recombineering recipient cell for precise trait transfer. GMT transfer of traits between E. coli strains can be used to rapidly assemble new strains incorporating combinations of marked gene knockouts, for example, utilizing the existing E. coli K-12 Keio gene knockout collection as source target genes. Optional use of random primed isothermal amplified DNA eliminates the need for initial DNA purification, affording high throughput application. This allows unprecedented simplicity and speed for rational design engineering of complex phenotypes in industrial strains.     

Specific detection of DNA and RNA targets using a novel isothermal nucleic acid amplification assay based on the formation of a three-way junction structure

The formation of DNA three-way junction (3WJ) structures has been utilised to develop a novel isothermal nucleic acid amplification assay (SMART) for the detection of specific DNA or RNA targets. The assay consists of two oligonucleotide probes that hybridise to a specific target sequence and, only then, to each other forming a 3WJ structure. One probe (template for the RNA signal) contains a non-functional single-stranded T7 RNA polymerase promoter sequence. This promoter sequence is made double-stranded (hence functional) by DNA polymerase, allowing T7 RNA polymerase to generate a target-dependent RNA signal which is measured by an enzyme-linked oligosorbent assay (ELOSA). The sequence of the RNA signal is always the same, regardless of the original target sequence. The SMART assay was successfully tested in model systems with several single-stranded synthetic targets, both DNA and RNA. The assay could also detect specific target sequences in both genomic DNA and total RNA from Escherichia coli. It was also possible to generate signal from E.coli samples without prior extraction of nucleic acid, showing that for some targets, sample purification may not be required. The assay is simple to perform and easily adaptable to different targets.     

Detection of viable Escherichia coli O157:H7 by ethidium monoazide real-time PCR

Aims: The aim of this study was to develop and optimize a novel method that combines ethidium bromide monoazide (EMA) staining with real‐time PCR for the detection of viable Escherichia  coli O157:H7 in ground beef. EMA can penetrate dead cells and bind to intracellular DNA, preventing its amplification via PCR. Methods and Results: Samples were stained with EMA for 5 min, iced for 1 min and exposed to bright visible light for 10 min prior to DNA extraction, to allow EMA binding of the DNA from dead cells. DNA was then extracted and amplified by TaqMan^® real‐time PCR to detect only viable E. coli O157:H7 cells. The primers and TaqMan^® probe used in this study target the uidA gene in E. coli O157:H7. An internal amplification control (IAC), consisting of 0·25 pg of plasmid pUC19, was added in each reaction to prevent the occurrence of false‐negative results. Results showed a reproducible application of this technique to detect viable cells in both broth culture and ground beef. EMA, at a final concentration of 10 μg ml^?1, was demonstrated to effectively bind DNA from 10⁸ CFU ml^?1 dead cells, and the optimized method could detect as low as 10⁴ CFU g^?1 of viable E. coli O157:H7 cells in ground beef without interference from 10⁸ CFU g^?1 of dead cells. Conclusions: EMA real‐time PCR with IAC can effectively separate dead cells from viable E. coli O157:H7 and prevent amplification of DNA in the dead cells. Significance and Impact of the Study: The EMA real‐time PCR has the potential to be a highly sensitive quantitative detection technique to assess the contamination of viable E. coli O157:H7 in ground beef and other meat or food products.     

Molecular monitoring of Escherichia coli O157: H7 sterilization rate using qPCR and propidium monoazide treatment

Propidium monoazide is a DNA‐intercalating dye. PMA‐qPCR has been reported as a novel method to detect live bacteria in complex samples. In this study, this method was used to monitor the sterilization effects of UHP, ultrasound and high PEF on Escherichia coli O157:H7. Our results showed that all three sterilization techniques are successful to kill viable E. coli O157:H7 cells under their appropriate conditions. PMA‐qPCR can effectively monitor the amount of DNA released from viable E. coli O157:H7 cells, and the results from PMA‐qPCR were highly consistent with those from plate counting after treatment with UHP, ultrasound and high PEF. The maximal ΔC_t between PMA‐qPCR and qPCR obtained in this study was 10·39 for UHP, 5·76 for ultrasound and 2·30 for high PEF. The maximal sterilization rates monitored by PMA‐qPCR were 99·92% for UHP, 99·99% for ultrasound and 100% for high PEF. Thus, PMA‐qPCR can be used to detect the sterilization effect on food and water supplies after treatment with UHP, ultrasound and high PEF.

Significance and Impact of the Study

The reliable detection of viable foodborne pathogenic bacteria in water and food is of great importance in our daily life. However, the traditional bacteria cultivation‐based methods are time‐consuming and difficult to monitor all viable bacteria because of the limitation of cultivation conditions. This study demonstrated that PMA‐qPCR technique is very effective to monitor viable E. coli O157:H7 after sterilization and will help to monitor the viable bacteria in food and water.     

Detection of Bacteria Carrying the stx2 Gene by In Situ Loop-Mediated Isothermal Amplification

A new in situ DNA amplification technique for microscopic detection of bacteria carrying a specific gene is described. Loop-mediated isothermal amplification (LAMP) was used to detect stxA₂ in Escherichia coli O157:H7 cells. The mild permeabilization conditions and low isothermal temperature used in the in situ LAMP method caused less cell damage than in situ PCR. It allowed use of fluorescent antibody labeling in the bacterial mixture after the DNA amplification for identification of E. coli O157:H7 cells with an stxA₂ gene. Higher-contrast images were obtained with this method than with in situ PCR.     

A biomarker for the identification of swine fecal pollution in water,using the STII toxin gene from enterotoxigenic<Emphasis Type="Italic"> Escherichia coli</Emphasis>

This research developed a PCR method to identify swine fecal pollution in water, using a portion of the STII toxin gene from enterotoxigenic Escherichia coli as the target sequence. This method showed the gene to have a wide-spread geographical distribution and temporal stability; and the primers demonstrated high specificity, sensitivity, and reliability. A total of 110 DNA extracts from different animal fecal and human sewage samples were screened using the primers and no positives resulted. Centrifugation and filtration methods for concentrating E. coli seeded into stream, ocean, secondary effluent, and dairy lagoon waters resulted in detection limits at the femtogram and attogram levels. E. coli with the biomarker seeded into stream, ocean, and secondary effluent waters remained stable for approximately 2 weeks for all water types. Of the farm lagoon and waste samples tested, 94% were positive for the STII trait, regardless of the number of E. coli screened and 100% were positive when 35 E. coli isolates were screened. As the PCR product of the target sequence yielded a single band, the method is applicable to dot blot detection methodology, yielding great accuracy in determining the presence of swine fecal sources.     

Comparison of quantitative PCR assays for Escherichia coli targeting ribosomal RNA and single copy genes

Aims: Compare specificity and sensitivity of quantitative PCR (qPCR) assays targeting single and multi‐copy gene regions of Escherichia coli. Methods and Results: A previously reported assay targeting the uidA gene (uidA405) was used as the basis for comparing the taxonomic specificity and sensitivity of qPCR assays targeting the rodA gene (rodA984) and two regions of the multi‐copy 23S ribosomal RNA gene (EC23S and EC23S857). Experimental analyses of 28 culture collection strains representing E. coli and 21 related non‐target species indicated that the uidA405 and rodA984 assays were both 100% specific for E. coli while the EC23S assay was only 29% specific. The EC23S857 assay was only 95% specific due to detection of E. fergusonii. The uidA405, rodA984, EC23S and EC23S857 assays were 85%, 85%, 100% and 86% sensitive, respectively, in detecting 175 presumptive E. coli culture isolates from fresh, marine and waste water samples. In analyses of DNA extracts from 32 fresh, marine and waste water samples, the rodA984, EC23S and EC23S857 assays detected mean densities of target sequences at ratios of approximately 1 : 1, 243 : 1 and 6 : 1 compared with the mean densities detected by the uidA405 assay. Conclusions: The EC23S assay was less specific for E. coli, whereas the rodA984 and EC23S857 assay taxonomic specificities and sensitivities were similar to those of the uidA405 gene assay. Significance and Impact: The EC23S857 assay has a lower limit of detection for E. coli cells than the uidA405 and rodA984 assays due to its multi‐copy gene target and therefore provides greater analytical sensitivity in monitoring for these faecal pollution indicators in environmental waters by qPCR methods.     

Compared with conventional PCR assay,qPCR assay greatly improves the detection efficiency of predation

Studies of predation can contribute greatly to understanding predator–prey relationships and can also provide integral knowledge concerning food webs and multi‐trophic level interactions. Both conventional polymerase chain reaction (cPCR) and quantitative PCR (qPCR) have been employed to detect predation in the field because of their sensitivity and reproducibility. However, to date, few studies have been used to comprehensively demonstrate which method is more sensitive and reproducible in studies of predation. We used a Drosophila melanogaster‐specific DNA fragment (99 bp) to construct a tenfold gradient dilution of standards. Additionally, we obtained DNA samples from Pardosa pseudoannulata individuals that fed on D. melanogaster at various time since feeding. Finally, we compared the sensitivity and reproducibility between cPCR and qPCR assays for detecting DNA samples from feeding trials and standards. The results showed that the cPCR and qPCR assays could detect as few as 1.62 × 10³ and 1.62 × 10¹ copies of the target DNA fragment, respectively. The cPCR assay could detect as few as 48 hr post‐feeding of the target DNA fragment. But the qPCR assay showed that all spiders were positive after consuming prey at various time intervals (0, 24, 48, 72, and 96 hr). A smaller proportion of the technical replicates were positive using cPCR, and some bands on the agarose gel were absent or gray, while some were white and bright for the same DNA samples after amplification by cPCR. By contrast, a larger proportion of the technical replicates were positive using qPCR and the coefficients of variation of the Ct value for the three technical replicates of each DNA sample were less than 5%. These data showed that qPCR was more sensitive and highly reproducible in detecting such degraded DNA from predator's gut. The present study provides an example of the use of cPCR and qPCR to detect the target DNA fragment of prey remains in predator's gut.     

Detection of Live Escherichia coli O157:H7 Cells by PMA-qPCR

A unique open reading frame (ORF) Z3276 was identified as a specific genetic marker for E. coli O157:H7. A qPCR assay was developed for detection of E. coli O157:H7 by targeting ORF Z3276. With this assay, we can detect as low as a few copies of the genome of DNA of E. coli O157:H7. The sensitivity and specificity of the assay were confirmed by intensive validation tests with a large number of E. coli O157:H7 strains (n = 369) and non-O157 strains (n = 112). Furthermore, we have combined propidium monoazide (PMA) procedure with the newly developed qPCR protocol for selective detection of live cells from dead cells. Amplification of DNA from PMA-treated dead cells was almost completely inhibited in contrast to virtually unaffected amplification of DNA from PMA-treated live cells. Additionally, the protocol has been modified and adapted to a 96-well plate format for an easy and consistent handling of a large number of samples. This method is expected to have an impact on accurate microbiological and epidemiological monitoring of food safety and environmental source.     

Establishment and evaluation of detection methods for process-specific residual host cell protein and residual host cell DNA in biological preparation

To establish accurate detection methods of process-specific Escherichia coli residual host cell protein (HCP) and residual host cell DNA (rcDNA) in recombinant biological preparations. Taking the purification process of GLP expressed by E. coli as a specific-process model, the HCP of empty E. coli was intercepted to immunize mice and rabbits. Using IgG from immunized rabbits as the coating antibody and mouse immune serum as the second sandwich antibody, a process-specific enzyme-linked immunosorbent assay (ELISA) for E. coli HCP was established. Targeting the 16S gene of E. coli, ddPCR was used to obtain the absolute copies of rcDNA in samples. Non-process-specific commercial ELISA kit and the process-specific ELISA established in this study were used to detect the HCP in GLP preparation. About 62% of HCPs, which should be process-specific HCPs, could not be detected by the non-process-specific commercial ELISA kit. The sensitivity of established ELISA can reach 338 pg/mL. The rcDNA could be absolutely quantitated by ddPCR, for the copies of rcDNA in three multiple diluted samples showed a reduced gradient. While the copies of rcDNA in three multiple diluted samples could not be distinguished by the qPCR. Process-specific ELISA has high sensitivity in detecting process-specific E. coli HCP. The absolutely quantitative ddPCR has much higher accuracy than the relatively quantitative qPCR, it is a nucleic acid quantitative method that is expected to replace qPCR in the future.     

Development of a recombinase polymerase amplification combined with a lateral flow dipstick assay for rapid detection of the <Emphasis Type="Italic">Mycoplasma bovis</Emphasis>

Background

Mycoplasma bovis (M. bovis) is a major etiological agent of bovine mycoplasmosis around the world. Point-of-care testing in the field is lacking owing to the requirement for a simple, robust field applicable test that does not require professional laboratory equipment. The recombinase polymerase amplification (RPA) technique has become a promising isothermal DNA amplify assay for use in rapid and low-resource diagnostics.

Results

Here, a method for specific detection of M. bovis DNA was established, which was RPA combined with lateral flow dipstick (LFD). First, the analytical specificity and sensitivity of the RPA primer and LF-probe sets were evaluated. The assay successfully detected M. bovis DNA in 30?min at 39 °C, with detection limit of 20 copies per reaction, which it was compared the real-time quantitative PCR (qPCR) assay. This method was specific because it did not detect a selection of other bacterial pathogens in cattle. Both qPCR and RPA-LFD assays were used to detect M. bovis 442 field samples from 42 different dairy farms in Shandong Province of China, also the established RPA-LFD assay obtained 99.00% sensitivity, 95.61% specificity, and 0.902 kappa coefficient compared with the qPCR.

Conclusions

To the author’s knowledge, this is the first report using an RPA-FLD assay to visualise and detect M. bovis. Comparative analysis with qPCR indicates the potential of this assay for rapid diagnosis of bovine mycoplasmosis in resource limited settings.

     

改良环介导等温扩增技术快速检测肉类中的大肠杆菌O157: H7

针对大肠杆菌O157:H7(Escherichia coli O157:H7,E.coli O157:H7)传统检测方法检测周期长的问题,建立了肉类中的E.coli O157:H7的改良环介导等温扩增(LAMP)快速检测方法。以E.coli O157:H7的O157特异性抗原rfbE基因、鞭毛H7特异性抗原fliC基因序列作为靶序列,分别设计2套增加了环引物的改良LAMP引物序列,单管同时检测,通过肉眼观察白色沉淀,判断检测结果。采用36株细菌验证了该改良LAMP引物的特异性。热裂解法提取的DNA经改良LAMP体系扩增20 min,检测E.coli O157:H7的灵敏度为1.4 CFU/mL,人工污染肉中的E.coli O157:H7检出限为1.8 CFU/g。137份实样中,检测出1份E.coli O157:H7假阳性,与行业标准SNT0973-2000符合率达到99.3%。     

Development and application of a loop-mediated isothermal amplification method on rapid detection <Emphasis Type="Italic">Escherichia coli</Emphasis> O157 strains from food samples

We developed and evaluated the specificity and sensitivity of a loop-mediated isothermal amplification (LAMP) method for rapid detection of the food-borne Escherichia coli O157 strains. Six primers, including outer primers, inner primers and loop primers, were specially designed for recognizing eight distinct sequences on three targets, which were rfbE, stx1 and stx2. The detection limits were found to be 100, 100 and 10 fg DNA/tube for rfbE, stx1 and stx2, respectively. Application of LAMP assays were performed on 417 food-borne E. coli strains, the sensitivity of LAMP assays for the rfbE, stx1 and stx2 was 100, 95.3 and 96.3%, and the negative predictive value was 100, 96.7 and 97.1%, respectively; with a 100% specificity and positive predictive value for all three targets.     

Real-time loop-mediated isothermal amplification assay for rapid and sensitive detection of anthrax spores in spiked soil and talcum powder

Loop-mediated isothermal amplification (LAMP) assay is a powerful and innovative gene amplification technique that specifically amplifies the target gene under isothermal conditions with a high degree of sensitivity, rapidity and specificity. The major advantage of the LAMP assay is monitoring of amplified products without the requirement of any sophisticated equipment. In the present study a real time LAMP assay was employed for rapid and real time detection of Bacillus anthracis spores spiked in 0.1 g of soil and talcum powder ranging from 2 to 10⁷ spores. DNA was isolated from spiked soil and talcum powder using PBS containing 1% Triton X-100, and heat treatment. Isolated DNA was used as template for LAMP and PCR. LAMP amplification was obtained in 60 min under isothermal condition at 63°C by employing a set of six primers targeting the pag gene of B. anthracis. The detection limit of LAMP assay in soil and talcum powder was found to be as low as 5 spores, compared to 10³ spores and 10⁴ spores by PCR in talcum powder and soil, respectively. The findings suggest that LAMP is a more rapid and sensitive assay than PCR for detecting anthrax spores, additionally the methodology to prepare DNA from spiked samples is simple, rapid and cost effective.     

Optimization, validation, and application of a real-time PCR protocol for quantification of viable bacterial cells in municipal sewage sludge and biosolids using reporter genes and Escherichia coli

Biosolids result from treatment of sewage sludge to meet jurisdictional standards, including pathogen reduction. Once government regulations are met, materials can be applied to agricultural lands. Culture-based methods are used to enumerate pathogen indicator microorganisms but may underestimate cell densities, which is partly due to bacteria existing in a viable but non-culturable physiological state. Viable indicators can also be quantified by real-time polymerase chain reaction (qPCR) used with propidium monoazide (PMA), a dye that inhibits amplification of DNA found extracellularly or in dead cells. The objectives of this study were to test an optimized PMA-qPCR method for viable pathogen detection in wastewater solids and to validate it by comparing results to data obtained by conventional plating. Reporter genes from genetically marked Pseudomonas sp. UG14Lr and Agrobacterium tumefaciens 542 cells were spiked into samples of primary sludge, and anaerobically digested and Lystek-treated biosolids as cell-free DNA, dead cells, viable cells, and mixtures of live and dead cells, followed by DNA extraction with and without PMA, and qPCR. The protocol was then used for Escherichia coli quantification in the three matrices, and results compared to plate counts. PMA-qPCR selectively detected viable cells, while inhibiting signals from cell-free DNA and DNA found in membrane-compromised cells. PMA-qPCR detected 0.5–1 log unit more viable E. coli cells in both primary solids and dewatered biosolids than plate counts. No viable E. coli was found in Lystek-treated biosolids. These data suggest PMA-qPCR may more accurately estimate pathogen cell numbers than traditional culture methods.     

Quantitative real-time PCR technique for the identification of E. coli residual DNA in streptokinase recombinant product

Recombinant streptokinase is a biopharmaceutical which is usually produced in E. coli. Residual DNA as a contamination and risk factor may remain in the product. It is necessary to control the production procedure to exclude any possible contamination. The aim of the present study was to develop a highly specific and sensitive quantitative real-time PCR-based method to determine the amount of E. coli DNA in recombinant streptokinase. A specific primers and a probe was designed to detect all strains of E. coli. To determine the specificity, in addition to using NCBI BLASTn, 28 samples including human, bacterial, and viral genomes were used. The results confirmed that the assay detects no genomic DNA but E. coli’s and the specificity was determined to be 100%. To determine the sensitivity and limit of detection of the assay, a 10-fold serial dilution (10¹ to 10⁷ copies/µL) was tested in triplicate. The sensitivity of the test was determined to be 101 copies/µL or 35 fg/µL. Inter-assay and intra-assay were determined to be 0.86 and 1.69%, respectively. Based on the results, this assay can be used as an accurate method to evaluate the contamination of recombinant streptokinase in E. coli.     

Development of multisample detection system using a tag insertion primer and an electrochemical DNA chip

We have developed a novel multisample detection system by employing a technology combining a tag insertion primer and an electrochemical DNA chip. In the first application, Helicobacter species-infected mouse samples were detected. The primers that insert a different tag sequence in each sample were prepared, and loop-mediated isothermal amplification (LAMP) reaction was carried out. Then amplification products in which a part of the sequence was different in each sample could be obtained. The target sample in which these amplification products were mixed was injected into a cassette that included the DNA chip with immobilized probes. After the cassette was set in the DNA detection system, Genelyzer, the processes of hybridization, washing, and detection were performed by the system automatically. The positive and negative concordance rates of the existing nested polymerase chain reaction (PCR) method and this method were 100% (40/40 samples) and 97.3% (117/120 samples), respectively. This is a simple high-throughput method. Moreover, the cost per sample can be drastically lowered. Therefore, it is expected to contribute to the diagnosis of infectious agents in humans and animals.