新型多价大肠埃希菌噬菌体285P生物学特性研究

筛选多价大肠埃希菌噬菌体,确定其宽噬宿主谱、形态大小及核酸类型等基本特征,为应用于环境微生物消毒奠定基础。应用双层琼脂平板法确定多价噬菌体的宿主谱;透视电镜观察形态结构;提取核酸,并利用分光光度法和核酸酶(DNase、RNase A及S1)酶切的方法对核酸进行鉴定;SDS-PAGE电泳分析噬菌体膜蛋白。大肠埃希菌BL21、DH5α、JM109为噬菌体285P的宽噬宿主;电镜下呈微球型,边缘光滑,短尾,颗粒直径约81 nm;分光光度法及核酸酶切法均证实核酸为双链DNA;膜蛋白略小于43 ku。噬菌体285P对多株大肠埃希菌具有宽噬作用,对环境中微生物的控制具有潜在的应用价值。     

Electrochemical disinfection of bacteria in drinking water using activated carbon fibers

A novel electrochemical reactor employing activated carbon fiber (ACF) electrodes was constructed for disinfecting bacteria in drinking water. Escherichia coli adsorbed preferentially onto ACF rather than to carbon-cloth or granular-activated carbon. E. coli cells, which adsorbed onto the ACF, were killed electrochemically when a potential of 0.8 V vs. a saturated calomel electrode (SCE) was applied. Drinking water was passed through the reactor in stop-flow mode: 2mL/min for 12 h, o L/min for 24 h, and 1 mL/min for 6 h. At an applied potential of 0.8 V vs, SCE, viable cell concentration reamined below 30 cells/mL. In the absence of an applied potential, bacteria grew to a maximum concentration of 9.5 x 10(3) cells/mL. After continuous operation at 0.8 V vs. SCE, cells adsorbed onto the ACF could not be observed by scanning electron microscopy. In addition, chlorine in drinking water was completely removed by the reactor. Therefore, clean and efficient inactivation of bacteria in drinking water was successfully performed. (c) 1994 John Wiley & Sons, Inc.     

COD,nutrient removal and disinfection efficiency of a combined subsurface and surface flow constructed wetland: A case study

A constructed wetland system composed of a subsurface flow wetland, a surface flow wetland and a facultative pond was studied from July 2008 until May 2012. It was created to treat the domestic sewage produced by a hamlet of 150 inhabitants. Monthly physicochemical and microbiological analyses were carried out in order to evaluate the removal efficiency of each stage of the process and of the total treatment system. Pair-wise Student's t-tests showed that the mean removal of each considered parameter was significantly different (α = 0.05) between the various treatment phases. Two-way ANOVA and Tukey's HSD tests were used to find significant differences between wetland types and seasons in the removal efficiency of the considered water quality parameters. Significant differences in percent removal efficiency between the treatment phases were observed for total phosphorus, total nitrogen, ammonia nitrogen and organic load (expressed as Chemical Oxygen Demand). In general, the wastewater treatment was carried by the sub-superficial flow phase mainly, both in growing season and in quiescence season. Escherichia coli removal ranged from 98% in quiescence season to >99% in growing season (approximately 2–3 orders of magnitude). The inactivation of fecal bacteria was not influenced by the season, but only by the treatment phase.     

Efficacy of multiple metals against copper-resistant bacterial strains

Aims: The antibacterial efficacy of zeolites containing copper (Cu) or silver (Ag) ions or a combination was assessed against several reported copper‐resistant (Cu^R) bacterial strains. Methods and Results: Comparison strains were obtained from the American Type Culture Collection that had no documented metal resistance. Reductions in bacterial populations were determined after exposure time intervals of 3, 6 and 24 h. All three Cu^R strains of Salmonella enterica exhibited resistance to Cu, Ag and Cu/Ag after three and 6 h of exposure. Both the Cu^R and comparison strain of Enterococcus faecium were resistant to both metals and the metal combination. Cu^RPseudomonas putida was significantly reduced by all zeolites within 3 h. The Cu^REscherichia coli strain was more sensitive to Cu, but more resistant to Ag than the comparison strain; however, significant reductions were achieved within 3 h with both Cu and Cu/Ag, and within 24 h with Ag. Conclusions: Some strains with reported resistance to Cu were also resistant to Ag, suggestive of a shared resistance mechanism such as an indiscriminate Cu efflux pump. Ent. faecium appears to have innate resistance to both metals. In general, Ent. faecium was the most resistant species to the individual metals and the combination of metals, Ps. putida the least resistant, and the Salmonella strains were more resistant than E. coli. Significance and Impact of the Study: Several of the comparison strains with no reported copper resistance were resistant to one or both metals. This may call into question the methods for determining bacterial metal resistance, which typically use nutrient‐rich media containing metals to assess the ability of the bacteria to grow in comparison with a wild‐type strain. Nevertheless, all the Cu^R strains evaluated in this study, with the exception of Ent. faecium, were reduced using the Cu and Ag zeolite combination.     

Potential self‐disinfection capacity of touch screen displays

Touch screen displays are potential pathogen reservoirs and involved in the spread of hospital acquired infections. They emit visible light that is known for a weak but proven antimicrobial photoinactivation effect, so the question is whether displays have the potential to disinfect themselves. To test the antimicrobial capacity of touch screen displays, Staphylococcus carnosus are distributed on Samsung tablets and illuminated for up to 36 hours. The average number of colony forming units decreases with time with white light being the most efficient followed by blue, green and red light. Increasing the illumination intensity by a mirror leads to a faster bacterial decrease up to a 90% reduction in 15 hours. A 99.99% reduction of staphylococci should be possible by turning on the display over the weekend.     

Impact of ciprofloxacin impurities on bacterial growth,antibiotic resistance development and content assays

In addition to active pharmaceutical ingredient (API), antibiotics may contain small amounts of excipients and impurities and be prone to accumulation of degradation products. There has been limited work characterizing how these substances impact bacterial growth and antibiotic resistance development. We investigated how two ciprofloxacin (CIP) impurities, fluoroquinolonic acid (FQA) and ciprofloxacin ethylenediamine analogue (CEA), impact growth and antibiotic resistance in Escherichia coli. Additionally, we investigated how these impurities impact a frequently used API content assay. Both impurities displayed modest antimicrobial activity compared to the CIP API. The effective antimicrobial activity of a medicine containing increased impurity levels may permit bacterial growth and resistance development. Our results also suggest that increasing exposure concentration and duration to CEA and FQA, independent of CIP, can promote antibiotic resistance development. However, at concentrations of 100% and below the MIC of the API, impurities had limited contributions to resistance development compared to the CIP API. From a methodological standpoint, we found that UV spectrophotometry may be inadequate to account for antibiotic impurities or degradation products. This can lead to incorrect estimations of API content and we propose additional multi-wavelength measures when using UV spectrophotometry to help identify impurities or degradation.     

Phenotypic and molecular characteristics of Escherichia coli isolated from aquatic environment of Bangladesh

Pathogenic Escherichia coli remains important etiological agent of infantile diarrhea in Bangladesh. Previous studies have focused mostly on clinical strains, but very little is known about their presence in aquatic environments. The present study was designed to characterize potentially pathogenic E. coli isolated between November 2001 and December 2003 from aquatic environments of 13 districts of Bangladesh. Serotyping of 96 randomly selected strains revealed O161 to be the predominant serotype (19%), followed by O55 and O44 (12% each), and 11% untypable. Serotype-based pathotyping of the E. coli strains revealed 47%, 30%, and 6% to belong to EPEC, ETEC, and EHEC pathotypes, respectively. The majority of the 160 strains tested were resistant to commonly used antimicrobial agents. Plasmid pro-filing showed a total of 17 different bands ranging from 1.3 to 40 kb. However, 35% of the strains did not contain any detectable plasmid, implying no correlation between plasmid and drug resistance. Although virulence gene profiling revealed 97 (61%) of the strains to harbor the gene encoding heat-stable enterotoxin (ST), 2 for the gene encoding Shiga toxin (Stx), and none for the gene for heat-labile enterotoxin (LT), serotype-based pathotyping of E. coli was not fully supported by this gene profiling. A dendrogram derived from the PFGE patterns of 22 strains of three predominant serogroups indicated two major clusters, one containing mainly serogroup O55 and the other O8. Three strains of identical PFGE profiles belonging to serogroup O55 were isolated from three distinct areas, which may be of epidemiological significance. Finally, it may be concluded that serotype-based pathotyping may be useful for E. coli strains of clinical origin; however, it is not precise enough for reliably identifying environmental strains as diarrheagenic.     

Perspectives on air disinfection methods in the workplace of blood transfusion services

Blood collection and preparation is a relatively open operation in a conventional environment, and is vulnerable to be contaminated by various types of airborne pathogenic microorganisms. It is important to establish stable and effective air disinfection methods for all types of environments in blood transfusion services, in order to control air hygiene quality and thus reduce the probability of contamination during blood collection. This paper analyzes and summarizes the principles, advantages, and disadvantages of commonly used chemical and physical air disinfection methods and their application status. It is suggested that over-reliance on chemical reagents and disinfection facilities be reduced, so that better results can be achieved with the combination of multiple disinfection methods and dynamic air hygiene monitoring.