Conducting polymer polypyrrole supported bilayer lipid membranes

Electrochemically synthesized conducting polymer polypyrrole (PPy) film on gold electrode surface was used as a novel support for bilayer lipid membranes (BLMs). Investigations by surface plasmon resonance (SPR) suggest that dimyristoyl-L-alpha-phosphatidylcholine (DMPC) and dimyristoyl-L-alpha-phosphatidyl-L-serine (DMPS) can form BLMs on PPy film surface but dimyristoyl-L-alpha-phosphatidylglycerol (DMPG) and didodecyldimethylammonium bromide (DDAB) can not do so, indicating the formation of PPy supported bilayer lipid membranes (s-BLMs) is dependent on the chemical structure of the lipids used. The self-assembly of DMPC induces a smoother topography than the PPy layer with rms roughness decreasing from 4.484 to 2.914 nm convinced by atomic force microscopy (AFM). Impedance spectroscopy measurements confirm that the deposition of BLM substantially increases the resistance of the system indicating a very densely packed BLM structures. The little change of PPy film in capacitance shows that solvent and electrolyte ions still retain within the porous PPy film after BLM deposition. Therefore, the PPy supported BLM is to some extent comparable to conventional BLM with aqueous medium retaining at its two sides. As an example and preliminary application, horseradish peroxidase (HRP) reconstituted into the s-BLM shows the expected protein activity and can transfer electron from or to the underlying PPy support for its response to electrocatalytic reduction of hydrogen peroxide in solution. Thus the system maybe possesses potential applications to biomimetic membrane studies.     

Voltammetric study of charge transfer across supported bilayer lipid membranes (s-BLMs).

Stable bilayer lipid membranes on a metal support (s-BLMs) and on an agar gel salt bridge (sb-BLMs) have been formed and their potential usefulness as practical sensors demonstrated. This paper presents the preparation method of s-BLMs and sb-BLMs, and the application of cyclic voltammetry (CV) to their investigation. The instrument and data analysis of the CV are described. The application of CV to the C60-doped BLM system is presented. This technique is a basis for biosensor development, and a useful tool for membrane research.     

Detergent effects on enzyme activity and solubilization of lipid bilayer membranes

Over 50 detergents were tested to establish which would be most effective in releasing proteins from membrane-bounded compartments without denaturating them. Various concentrations of each detergent were tested for two activities: (1) solubilization of egg phospholipid liposomes as measured by reduction of turbidity and (2) effect of detergent concentration on the activities of soluble, hydrolytic enzymes. Those detergents must effective in solubilizing 0.2% lipid and least detrimental to enzymes were five pure, synthetic compounds recently introduced: CHAPS, CHAPSO, Zwittergents 310 and 312, and octylglucoside. Industrial detergents were generally much inferior, insofar as they solubilized membranes inefficiently and/or inactivated certain hydrolytic enzymes readily. The five detergents were characterized by (a) an unusually high critical micelle concentration and (b) a preference for forming mixed micelles with lipids instead of forming pure micelles, as indicated by an ability to solubilize lipid at concentrations of detergent significantly below the critical micelle concentration. This characteristic permits solubilization of high concentrations of membrane below the critical micelle concentration of the detergent so that protein denaturation is minimized. A generally applicable guideline that emerged from this study is that detergents should be used at approximately their critical micelle concentration which should not be exceeded by the concentration of membrane. Similar considerations should apply to the use of detergents in purifying and reconstituting intrinsic membrane proteins.     

Photoelectrospectrometry of bilayer lipid membranes

Three different bilayer lipid membrane systems were studied under visible and ultraviolet illumination. The first system consisted of a bilayer lipid membrane formed with a mixture of phospholipids and cholesterol, to one side of which purple membrane fragments from Halobacterium halobium were added. The second system consisted of a membrane formed from spinach chloroplast extract. When either of these membrane systems was illuminated with ultraviolet and visible radiation, photopotentials were observed and photoelectric action spectra were recorded (the technique is termed photoelectrospectrometry). Each spectrum had a definite structure which was characteristic of each of the modified membranes. The third system studied consisted of an otherwise photoinactive membrane formed with a mixture of phospholipids and cholesterol, to one side of which chymotrypsin was added. When the membrane was illuminated with visible light no photoresponse was observed. On the other hand, a photopotential which increased with incubation time was observed when the membrane was illuminated with ultraviolet light. Since, in our systems, the photoresponses have been observed to be due to certain species incorporated into the membrane, it appears that photoelectrospectrometry is a useful tool for studying lipid-protein interactions, constituent organization and energy transfer in membranes.     

Insulating tethered bilayer lipid membranes to study membrane proteins

Tethered bilayer lipid membranes are stable and promising model systems that mimic several properties of biological membranes. They provide an electrically insulating platform for the incorporation and study of functional membrane proteins, especially ion channels. Covalently linked to a solid support, they also offer enhanced stability compared with other model architectures. If the support can be used as an electrode, electrical characterisation of the system is possible and biosensing applications can be envisioned.Here, we will review some tethered bilayer structures developed in the past and show some examples of functional protein incorporation, both on oxide and gold substrates.     

Chemical and solvent effects on the interaction of tetraphenylborate with lipid bilayer membranes

Alkali metal salts of tetraphenylboron dissociate in aqueous solution to yield the hydrophobic anion, BPh₄^?, which is strongly adsorbed at the surfaces of lipid bilayer membranes. Upon application of a transmembrane voltage pulse these anions cross the membrane without appreciable desorption, thereby exhibiting a transient electrical conductance. The relaxation time of this transient is governed by the height of the central potential barrier which the anions must surmount in crossing the membrane. Because of discrete charge effects, the barrier height and hence the observed relaxation time increase markedly with increasing surface density of adsorbed BPh₄^?. Since adsorbed BPh₄^? are in partition equilibrium with the same species dissolved in the aqueous phase, measurement of the relaxation time for BPh₄^? membrane conductance can be used to assay the aqueous-phase concentration of the hydrophobic anion. In this way we have observed the precipitation of KBPh₄ in water, obtaining a solubility concentration product of 1.0·10^?7 mol²·dm^?6 for the precipitation reaction at 25°C. This result is larger by a factor of two than the most directly comparable published values from other sources. In additional experiments we have reduced the polarity of the aqueous phases bathing the membrane by adding varying amount of ethylene glycol to the water. Using the same conductance relaxation assay, we have determined that partitioning of BPh₄^? into the membrane/solution interfaces is lessened as the polarity of the bathing solutions is reduced. This result is attributed to a lowering of the chemical potential of the BPh₄^? in the less polar medium.     

Painted supported lipid membranes

We report herein measurements on a novel type of supported lipid films, which we call painted supported membranes (PSM). These membranes are formed in a self-assembly process on alkylated gold films from an organic solution. The formation process was investigated with surface plasmon resonance microscopy. The optical and electrical properties of the films were determined for various types of lipids and as a function of temperature by means of cyclic voltammetry and potential relaxation after charge injection. We could show that these films exhibit an extraordinarily high specific resistivity which, depending on the lipid, may be as high as 10⁹ ohm/cm². We could also show that due to this low conductivity, an electrical polarization across the PSM relaxes with characteristic time constants of up to 20 min. The electrical properties together with their high mechanical stability and accessibility to surface sensitive techniques make these films well suitable model membranes for optical and electrical investigations. Examples for such applications are given in the subsequent article by Seifert et al.     

Self-assembling bilayer lipid membranes on solid support

Solid-supported bilayer lipid membranes (s-BLMs) that possess some properties similar to those of conventional BLMs can be self-assembled on a freshly cleaved metal wire by a two-step procedure: (i) The tip of a Teflon-coated platinum wire, while immersed in a lipid solution, is cut off with a scalpel; (ii) the new tip of the wire, having become coated with lipid solution, is transferred into 0.1 M KCl. After a few minutes, a stable lipid bilayer forms spontaneously on the tip of the wire, as verified by electrical measurements. An application of such a supported BLM (s-BLM) is reported for the detection of Pb2+ ions. The s-BLM is liquid-crystalline in structure, which makes it amenable to modification for basic studies, as well as for technological applications such as biosensors and molecular electronic devices.     

Effect of the lantibiotic warnerin on lipid bilayer membranes

The effect of the lantibiotic warnerin on the ionic permeability of artificial membranes was studied. Membranes were composed of different lipid fractions, including lipids isolated from warnerin-sensitive cells of Staphylococcus epidermidis. Warnerin was shown to selectively interact with artificial membranes of different lipid composition, which in some cases led to formation of ion channels. Computer modeling of warnerin spatial structure supported the probable membranotropic activity of the peptide.     

Fluorescence coupling across lipid bilayer membranes

Summary An energy transfer between donor and acceptor fluorophores across single lipid bilayer membranes is demonstrated. Anilino-naphthalene sulfonate is used as the donor chromophore: its fluorescence is enhanced by the presence of lipid and thus indicates association with the purely lipid membranes of our preparation of vesicles in suspension. Light emit ted by the donor molecules excites fluorescence of acriflavine, a suitable acceptor enclosed inside the vesicles. Absorption and fluorescence spectra of this system, in its components and as a whole, are presented in evidence for an energy transfer.Supported by a grant from the Medical Research Council of Canada. The results of this work were presented, in part, at the 17th Annual Meeting of the Biophysical Society, February 27–March 2, 1973, Columbus, Ohio.Scholar of the Medical Research Council of Canada.     

Diffusion polarization at lipid bilayer membranes

Summary Expressions are derived for the decrease of the conductivity of lipid bilayer membranes caused by diffusion polarization in the aqueous solutions near the membrane. It is assumed that after a sudden change in the voltage or current, the reestablishment of the stationary state within the membrane is fast as compared to the change of ion concentration in the solutions. The time course of the diffusion polarization, then, can be calculated for experiments where either the voltage or the current are controlled. Criteria are given to distinguish diffusion polarization from other relaxation processes, and several limiting cases of experimental interest are discussed.     

Solute partitioning into lipid bilayer membranes

We have measured the membrane/water partition coefficients of benzene into lipid bilayers as a function of the surface density of the phospholipid chains. A simple 2H NMR method was used for the measurement of surface densities; it is shown to give results similar to those obtained from more demanding X-ray diffraction measurements. We observe that benzene partitioning into the bilayer is dependent not only on the partitioning chemistry, characterized by the oil/water partition coefficient, but also on the surface density of the bilayer chains. Increasing surface density leads to solute exclusion: benzene partitioning decreases by an order of magnitude as the surface density increases from 50% to 90% of its maximum value, a range readily accessible in bilayers and biomembranes under physiological conditions. This effect is independent of the nature of the agent used to alter surface density: temperature, cholesterol, and phospholipid chain length were tested here. These observations support the recent statistical thermodynamic theory of solute partitioning into chain molecule interphases, which predicts that the expulsion of solute is due to entropic effects of the orientational ordering among the phospholipid chains. We conclude that the partitioning of solutes into bilayer membranes, which are interfacial phases, is of a fundamentally different nature than partitioning into bulk oil and octanol phases.     

Lipid-polypeptide interactions in bilayer lipid membranes

Summary The modifications of the electrical properties of bilayer lipid membranes (BLM) composed of cholesterol and an ionic surfactant upon interaction with charged polypeptides were studied. The addition of 10^–8 m polylysine (Ps⁺) to one side of anionic cholesterol dodecylphosphate BLM increases the specific membrane conductance over 1000-fold (from 10^–8 to 10^–5 mho/cm²) and develops a cationic transmembrane potential larger than 50 mV. This potential is reverted by addition of polyanions such as RNA, polyglutamic or polyadenilic acid to the same side on which Ps⁺ is present, by addition of Ps⁺ to the opposite side, or by addition of trypsin to either side. Both conductance and potential changes are hindered by increasing the ionic strength or by raising the pH of the bathing medium, disappearing above pH 11.5 where it is known that Ps⁺ folds into an -helix. The interaction of polyglutamic acid (PGA) with a cationic cholesterol-hexadecyltrimethylammonium bromide BLM results in increased membrane conductance and development of an anionic transmembrane potential which is reverted by addition of polycations to the same aqueous phase where PGA is present. Addition of either Ps⁺ or PGA to one or both sides of a neutral BLM composed of 7-dehydrocholesterol induces no significant change. The observations suggest the formation of a lipid polymer membrane resultant from the interaction, predominantly electrostatic, of the isolated components. The implications of these results are discussed in terms of the current models of membrane structure.     

Plasmon-waveguide resonance and impedance spectroscopy studies of the interaction between penetratin and supported lipid bilayer membranes

The interaction between the cell-penetrating peptide, penetratin, and solid-supported lipid bilayer membranes consisting of either egg phosphatidylcholine (PC) or a 75/25 mol% mixture of egg PC and palmitoyloleylphosphatidylglycerol has been studied by simultaneously measuring plasmon-waveguide resonance (PWR) spectra and impedance spectra of lipid-peptide mixtures. When penetratin was incorporated into an egg PC + palmitoyloleylphosphatidylglycerol bilayer, PWR measurements showed a hyperbolic increase in the average refractive index and the refractive index anisotropy, with no change in membrane thickness, over a concentration range between 0 and 2 micro M peptide. In the case of an egg PC bilayer, a biphasic dependence was observed, with a decrease in average refractive index and anisotropy and no thickness change occurring between 0 and 5 micro M peptide, and an increase in membrane thickness occurring between 5 and 15 micro M peptide with no further change in the refractive index parameters. For both membranes, the impedance spectroscopy measurements demonstrated that the electrical resistance was not altered by peptide incorporation, whereas a decrease in membrane capacitance occurred with the same concentration dependence as observed in the PWR experiments, although for the PC membrane no further changes in electrical properties were observed in the higher concentration range. A structural interpretation of these results is described, in which the peptide binds electrostatically within the headgroup region of the bilayer and influences the headgroup conformation, amount of bound water, and the lipid-packing density, without perturbing the hydrocarbon core of the bilayer.     

Effects of uranyl ions on lipid bilayer membranes

Uranyl ions (UO₂²⁺) stabilize black lipid membranes (BLM's) as inferred from the doubling of the breakdown voltage and from a considerable increase in the lifetime of the BLM's. These effects are observed also in BLM's made of mono-olein and of oxidized cholesterol. The lytic effect of lysolecithin is significantly reduced in the presence of UO₂²⁺. Uranyl ions adsorb to the interface of BLM's made of phosphatidylcholine (PC) with a dissociation constant of about 3 : 10^?6 M and thereby charge the interface of the membrane and attain almost stoichiometric binding of one molecule of uranyl ion per one molecule of PC at 1 M ionic strength and 20 μM of UO₂²⁺. The membrane conductance induced by ionophores is considerably reduced by UO₂²⁺ and it is inferred by various tests that this is due to the charging of the interface and not to changes in membrane fluidity.     

The lipid charge density at the bilayer surface modulates the effects of melittin on membranes

The influence of melittin on two DMPA membrane systems at pH 4.2 and 8.2 has been investigated by solid-state 31P and 2H NMR, as a function of temperature and peptide concentration. Melittin promotes greater morphological changes for both systems in the fluid phase, the effect being larger at pH 4.2. Close inspection of fatty acyl chain dynamics suggests that some parallels can be drawn between the DMPA/melittin at pH 8.2 and PC/melittin systems. In addition, at pH 8.2 a direct neutralization at the interface of one of the lipid negative charges by a positive charge of the peptide occurs, as can be monitored by 31P NMR at the molecular level. For the system at pH 4.2 and at high temperature, a lipid-to-peptide molar ratio of 30 is sufficient to transform the whole system into an isotropic phase, proposed to be inverted micelles. When the system is cooled down towards the gel phase one observes an intermediate hexagonal phase in a narrow range of temperature.