A surface accumulator of Escherichia coli in water flow

The objective of this research is to design and optimise a mini/micro-channel based surface accumulator of Escherichia coli to be detected by acoustic wave biosensors. A computational research has been carried out using the state of the art software, CFD-ACE with water as bacteria bearing fluid. E. coli bacteria have been modelled as random discrete particles tracked by solving the Lagrangian equations. The design challenges are to achieve low shear force (pico-N), high concentration at accumulation and high enough Reynolds number to avoid bacteria swimming. A range of low Reynolds number (Re) from 28.2 to 58.3 has been considered along with the effects of particle-boundary interactions, gravity, Saffman lift and Magnus lift. About four orders of magnitude higher concentration at accumulation than the inlet concentration and lower shear force in the order of less than pico-N have been achieved in the optimised design with particles accumulating at a specific location under random particle-boundary interactions.     

A surface accumulator of Escherichia coli in water flow

The objective of this research is to design and optimise a mini/micro-channel based surface accumulator of Escherichia coli to be detected by acoustic wave biosensors. A computational research has been carried out using the state of the art software, CFD-ACE with water as bacteria bearing fluid. E. coli bacteria have been modelled as random discrete particles tracked by solving the Lagrangian equations. The design challenges are to achieve low shear force (pico-N), high concentration at accumulation and high enough Reynolds number to avoid bacteria swimming. A range of low Reynolds number (Re) from 28.2 to 58.3 has been considered along with the effects of particle–boundary interactions, gravity, Saffman lift and Magnus lift. About four orders of magnitude higher concentration at accumulation than the inlet concentration and lower shear force in the order of less than pico-N have been achieved in the optimised design with particles accumulating at a specific location under random particle–boundary interactions.     

Osmoprotection of Escherichia coli by peptone is mediated by the uptake and accumulation of free proline but not of proline-containing peptides

The effect of meat peptone type I (Sigma) on the growth of Escherichia coli cells under hyperosmotic stress has been investigated. Peptone is a complex mixture of peptides with a small content of free amino acids, which resembles nutrients found in natural environments. Our data showed that peptone enhances the growth of E. coli cells in high-osmolarity medium to levels higher than those achieved with the main compatible solute in bacteria, glycine betaine. The mechanism of osmoprotection by peptone comprises the uptake and accumulation of the compatible solute, proline. The main role of the peptides contained in peptone is the provision of nutrients rather than the intracellular accumulation of osmolytes. In contrast to Listeria monocytogenes (M. R. Amezaga, I. Davidson, D. McLaggan, A. Verheul, T. Abee, and I. R. Booth, Microbiology 141:41-49, 1995), E. coli does not accumulate exogenous peptides for osmoprotection and peptides containing proline do not lead to the accumulation of proline as a compatible solute. In late-logarithmic-phase cultures of E. coli growing at high osmolarity plus peptone, proline becomes the limiting factor for growth, and the intracellular pools of proline are not maintained. This is a consequence of the low concentration of free proline in peptone, the catabolism of proline by E. coli, and the inability of E. coli to utilize proline-containing peptides as a source of compatible solutes. Our data highlight the role that natural components in food such as peptides play in undermining food preservation regimes, such as high osmolarity, and also that the specific mechanisms of osmoprotection by these compounds differ according to the organism.     

Cell size and the initiation of DNA replication in bacteria

In eukaryotes, DNA replication is coupled to the cell cycle through the actions of cyclin-dependent kinases and associated factors. In bacteria, the prevailing view, based primarily from work in Escherichia coli, is that growth-dependent accumulation of the highly conserved initiator, DnaA, triggers initiation. However, the timing of initiation is unchanged in Bacillus subtilis mutants that are ~30% smaller than wild-type cells, indicating that achievement of a particular cell size is not obligatory for initiation. Prompted by this finding, we re-examined the link between cell size and initiation in both E. coli and B. subtilis. Although changes in DNA replication have been shown to alter both E. coli and B. subtilis cell size, the converse (the effect of cell size on DNA replication) has not been explored. Here, we report that the mechanisms responsible for coordinating DNA replication with cell size vary between these two model organisms. In contrast to B. subtilis, small E. coli mutants delayed replication initiation until they achieved the size at which wild-type cells initiate. Modest increases in DnaA alleviated the delay, supporting the view that growth-dependent accumulation of DnaA is the trigger for replication initiation in E. coli. Significantly, although small E. coli and B. subtilis cells both maintained wild-type concentration of DnaA, only the E. coli mutants failed to initiate on time. Thus, rather than the concentration, the total amount of DnaA appears to be more important for initiation timing in E. coli. The difference in behavior of the two bacteria appears to lie in the mechanisms that control the activity of DnaA.     

Shear-dependent 'stick-and-roll' adhesion of type 1 fimbriated Escherichia coli

It is generally assumed that bacteria are washed off surfaces as fluid flow increases because they adhere through 'slip-bonds' that weaken under mechanical force. However, we show here that the opposite is true for Escherichia coli attachment to monomannose-coated surfaces via the type 1 fimbrial adhesive subunit, FimH. Raising the shear stress (within the physiologically relevant range) increased accumulation of type 1 fimbriated bacteria on monomannose surfaces by up to two orders of magnitude, and reducing the shear stress caused them to detach. In contrast, bacterial binding to anti-FimH antibody-coated surfaces showed essentially the opposite behaviour, detaching when the shear stress was increased. These results can be explained if FimH is force-activated; that is, that FimH mediates 'catch-bonds' with mannose that are strengthened by tensile mechanical force. As a result, on monomannose-coated surfaces, bacteria displayed a complex 'stick-and-roll' adhesion in which they tended to roll over the surface at low shear but increasingly halted to stick firmly as the shear was increased. Mutations in FimH that were predicted earlier to increase or decrease force-induced conformational changes in FimH were furthermore shown here to increase or decrease the probability that bacteria exhibited the stationary versus the rolling mode of adhesion. This 'stick-and-roll' adhesion could allow type 1 fimbriated bacteria to move along mannosylated surfaces under relatively low flow conditions and to accumulate preferentially in high shear regions.     

Catch bond-mediated adhesion without a shear threshold: trimannose versus monomannose interactions with the FimH adhesin of Escherichia coli

The FimH protein is the adhesive subunit of Escherichia coli type 1 fimbriae. It mediates shear-dependent bacterial binding to monomannose (1M)-coated surfaces manifested by the existence of a shear threshold for binding, below which bacteria do not adhere. The 1M-specific shear-dependent binding of FimH is consistent with so-called catch bond interactions, whose lifetime is increased by tensile force. We show here that the oligosaccharide-specific interaction of FimH with another of its ligands, trimannose (3M), lacks a shear threshold for binding, since the number of bacteria binding under static conditions is higher than under any flow. However, similar to 1M, the binding strength of surface-interacting bacteria is enhanced by shear. Bacteria transition from rolling into firm stationary surface adhesion as the shear increases. The shear-enhanced bacterial binding on 3M is mediated by catch bond properties of the 1M-binding subsite within the extended oligosaccharide-binding pocket of FimH, since structural mutations in the putative force-responsive region and in the binding site affect 1M- and 3M-specific binding in an identical manner. A shear-dependent conversion of the adhesion mode is also exhibited by P-fimbriated E. coli adhering to digalactose surfaces.     

Studies on the accumulation of putrescine and spermidine in Escherichia coli

The rate of accumulation of the polyamines spermidine and putrescine by E. coli depended on growth rate. Spermidine accumulation was faster in chemostat cultures with high dilution rates than in those with low dilution rates and was slower in bacteria that had been grown for several generations with either putrescine or spermidine, suggesting that the spermidine-uptake system was repressed by exogenous polyamines. The uptake of spermidine required metabolic energy. Thus accumulation occurred in an energy-starved unc strain only upon addition of glucose (or D-lactate to a smaller extent). With glucose present accumulation occurred in an unc, frd strain under anaerobic conditions, suggesting that ATP drives uptake. However, accumulation was generally sensitive to carbonylcyanide m-chlorophenylhydrazone (CCCP), indicating that the proton motive force was involved in uptake. Unlike spermidine, putrescine accumulation was faster in slow-growing than in fast-growing cultures. This may have been due to greater efflux of putrescine at faster growth rates. Accumulation of putrescine was faster following prolonged growth with either putrescine or spermidine, suggesting induction of the putrescine-uptake system by exogenous polyamines. Like spermidine accumulation, putrescine accumulation required metabolic energy. Accumulation was insensitive to CCCP and occurred only when glucose was added to energy-starved unc bacteria, suggesting that high-energy bonds may drive the uptake of putrescine.     

Quantitative analysis of proton-linked transport systems. The lactose permease of Escherichia coli.

Evidence is presented that lactose uptake into whole cells of Escherichia coli occurs by symport with a single proton over the range of external pH 6.5--7.7. The proton/lactose stoicheiometry has been measured directly over this pH range by comparison of the initial rates of proton and lactose uptake into anaerobic resting cell suspensions of E. coli ML308. Further, the relationship between the protonmotive force and lactose accumulation has been studied in E. coli ML308-225 over the range of external pH 5.9--8.7. At no point was the accumulation of the beta-galactoside in thermodynamic equilibrium with the protonmotive force. It is concluded that the concentration of lactose within the cell is governed by kinetic factors rather than pH-dependent changes in the proton/substrate stoicheiometry. The relevance of these findings to the model of pH-dependent proton/substrate stoicheiometries derived from studies with E. coli membrane vesicles is discussed.     

重组大肠杆菌的分批补料培养方法

在重组大肠杆菌的培养过程中,存在着菌体的高浓度与外源蛋白的高表达这一矛盾,使得重组菌的比生长速率通常远远低于宿主菌,限制了基因工程菌由实验室规模向工业化规模的转变。要实现重组大肠杆菌的高密度培养,最常用和最有效的方法就是分批补料流加培养。     

High-level recombinant protein production by overexpression of Mlc in Escherichia coli

Escherichia coli excretes acetate during aerobic growth on LB broth containing glucose and growth ceases before depletion of glucose because of the low pH caused by the accumulation of acetate. It has been known that the acetate accumulation is reduced even when E. coli is grown in the presence of high concentration of glucose if Mlc is overexpressed. The intracellular concentration of Mlc is very low in E. coli because of autoregulation and a low efficiency of mlc translation. We constructed various mutants that can express higher levels of Mlc using site-directed mutagenesis and one of the Mlc-overproducing mutant showed reduced glucose consumption rate and low production of acetate. The mutant showed higher foreign gene expression level than that of its parental strain in the presence of glucose. These results suggest that the Mlc overproducing E. coli strain having an improved ability of glucose utilization can be a better host for high-level production of useful recombinant proteins.     

Experimental Study of the Vortex-Induced Vibration of Drilling Risers under the Shear Flow with the Same Shear Parameter at the Different Reynolds Numbers

A considerable number of studies for VIV under the uniform flow have been performed. However, research on VIV under shear flow is scarce. An experiment for VIV under the shear flow with the same shear parameter at the two different Reynolds numbers was conducted in a deep-water offshore basin. Various measurements were obtained by the fiber bragg grating strain sensors. Experimental data were analyzed by modal analysis method. Results show several valuable features. First, the corresponding maximum order mode of the natural frequency for shedding frequency is the maximum dominant vibration mode and multi-modal phenomenon is appeared in VIV under the shear flow, and multi-modal phenomenon is more apparent at the same shear parameter with an increasing Reynolds number under the shear flow effect. Secondly, the riser vibrates at the natural frequency and the dominant vibration frequency increases for the effect of the real-time tension amplitude under the shear flow and the IL vibration frequency is the similar with the CF vibration frequency at the Reynolds number of 1105 in our experimental condition and the IL dominant frequency is twice the CF dominant frequency with an increasing Reynolds number. In addition, the displacement trajectories at the different locations of the riser appear the same shape and the shape is changed at the same shear parameter with an increasing Reynolds number under the shear flow. The diagonal displacement trajectories are observed at the low Reynolds number and the crescent-shaped displacement trajectories appear with an increasing Reynolds number under shear flow in the experiment.     

Rapid electrochemical detection and identification of catalase positive micro-organisms

The rapid detection and identification of bacteria has application in a number of fields, e.g. the food industry, environmental monitoring and biomedicine. While in biomedicine the number of organisms present during infection is multiples of millions in the other fields it is the detection of low numbers of organisms that is important, e.g. an infective dose of Escherichia coli O157:H7 from contaminated food is less than 100 organisms. A rapid and sensitive technique has been developed to detect low numbers of the model organism E. coli O55, combining Lateral Flow Immunoassay (LFI) for capture and amperometry for sensitive detection. Nitrocellulose membranes were used as the solid phase for selective capture of the bacteria using antibodies to E. coli O55. Different concentrations of E. coli O55 in Ringers solution were applied to LFI strips and allowed to flow through the membrane to an absorbent pad. The capture region of the LFI strip was placed in close contact with the electrodes of a Clarke cell poised at +0.7 V for the detection of hydrogen peroxide. Earlier research identified that the consumption of hydrogen peroxide by bacterial catalase provided a sensitive indicator of aerobic and facultative anaerobic microorganisms numbers. Modification and application of this technique to the LFI strips demonstrated that the consumption of 8 mM hydrogen peroxide was correlated with the number of microorganisms presented to the LFI strips in the range of 2 x 10(1)-2 x 10(7) colony forming units (cfu). Capture efficiency was dependent on the number of organisms applied and varied from 71% at 2 x 10(2) cfu to 25% at 2 x 10(7) cfu. The procedure was completed in less than 10 min and could detect less than 10 cfu captured from a 200 microl sample applied to the LFI strip. The approached adopted provides proof of principle for the basis of a new technological approach to the rapid, quantitative and sensitive detection of bacteria that express catalase activity.     

Comparison of the Pseudomonas aeruginosa and Escherichia coli PhoQ sensor domains: evidence for distinct mechanisms of signal detection

The PhoP-PhoQ two-component system is present in a number of Gram-negative bacteria where it has roles in Mg(2+) homeostasis and virulence. PhoQ is a transmembrane histidine kinase that activates PhoP-mediated regulation of a set of genes when the extracellular concentration of divalent cations is low. Divalent cations are thought to interact directly with the periplasmic PhoQ sensor domain. The PhoP-PhoQ systems of Escherichia coli and Pseudomonas aeruginosa are similar in their biological response to extracellular divalent cations; however, their sensor domains display little sequence identity. Here we have begun to explore the consequences of this sequence divergence by comparing the biophysical properties of the P. aeruginosa PhoQ sensor domain with the corresponding E. coli sensor domain. Unlike the E. coli protein, the P. aeruginosa PhoQ sensor domain undergoes changes in the circular dichroism and fluorescence spectra as well as destabilization of its dimeric form in response to divalent cations. These results suggest that distinct mechanisms of signal detection are utilized by these proteins. A hybrid protein in which the E. coli sensor domain has been substituted with the corresponding P. aeruginosa sensor domain responds normally to the presence of extracellular divalent cations in vivo in E. coli. Thus, despite apparent differences in the structural response to its stimulus, the P. aeruginosa sensor domain transduces signals to the E. coli PhoQ cytoplasmic kinase domain in a manner that mimics normal E. coli PhoQ function.     

MazG,a nucleoside triphosphate pyrophosphohydrolase,interacts with Era,an essential GTPase in Escherichia coli

Era is an essential GTPase in Escherichia coli, and Era has been implicated in a number of cellular functions. Homologues of Era have been identified in various bacteria and some eukaryotes. Using the era gene as bait in the yeast two-hybrid system to screen E. coli genomic libraries, we discovered that Era interacts with MazG, a protein of unknown function which is highly conserved among bacteria. The direct interaction between Era and MazG was also confirmed in vitro, being stronger in the presence of GDP than in the presence of GTPgammaS. MazG was characterized as a nucleoside triphosphate pyrophosphohydrolase which can hydrolyze all eight of the canonical ribo- and deoxynucleoside triphosphates to their respective monophosphates and PP(i), with a preference for deoxynucleotides. A mazG deletion strain of E. coli was constructed by replacing the mazG gene with a kanamycin resistance gene. Unlike mutT, a gene for another conserved nucleotide triphosphate pyrophosphohydrolase that functions as a mutator gene, the mazG deletion did not result in a mutator phenotype in E. coli.     

A Love wave immunosensor for whole E. coli bacteria detection using an innovative two-step immobilisation approach

The efficiency of a monomolecular film of (3-glycidoxypropyl) trimethoxysilane (GPTS) on a shear horizontal guided (Love) acoustic wave immunosensor to detect whole Escherichia coli (E. coli) bacteria is demonstrated. Direct anti-E. coli antibodies grafting onto the sensor surface did not lead to a significant bacteria immobilisation, partially attributed to the SiO2 sensor surface roughness. An innovative method has been set up to get around this difficulty and to detect whole bacteria. It consists in grafting goat anti-mouse antibodies (GAM) onto the sensor surface in a first step and introducing E. coli bacteria mixed with anti-E. coli antibodies onto the sensor in a second step. We describe the characteristics of such a technique like sample preparation time (lower than 30 min) and temperature improvements. A 37 degrees C experimental temperature led to the fastest bacteria binding kinetic, reducing the total analysis time. This method enables to keep the specificity of the antibody/antigen interaction and provides significant results in less than 1h. This leads to a detection threshold of 10(6) bacteria/ml in a 500 microl chamber.     

Detection of Escherichia coli in blood using flow cytometry

A rapid method for the detection of Escherichia coli in blood has been developed. The method employs blood cell lysis, staining of bacteria with ethidium bromide, and detection of stained bacteria using flow cytometry. The detection protocol requires less than 2 h sample handling time and is not dependent on bacterial growth. This method has been applied to human donor blood specimens seeded with various E. coli concentrations and to two rabbit model systems. Bacterial detection is evident from the in vitro human blood studies at levels of 10 E. coli/ml and from in vivo rabbit model studies at less than 100 E. coli/ml.     

Propulsion Modeling and Analysis of a Biomimetic Swimmer

<正> We have studied a biomimetic swimmer based on the motion of bacteria such as Escherichia coli (E. coli) theoretically andexperimentally. The swimmer has an ellipsoidal cell body propelled by a helical filament. The performance of this swimmer wasestimated by modeling the dynamics of a swimmer in viscous fluid. We applied the Resistive Force Theory (RFT) on this modelto calculate the linear swimming speed and the efficiency of the model. A parametric study on linear velocity and efficiency tooptimize the design of this swimmer was demonstrated. In order to validate the theoretical results, a biomimetic swimmer wasfabricated and an experiment setup was prepared to measure the swimming speed and thrust force in silicone oil. The experimentalresults agree well with the theoretical values predicted by RFT. In addition, we studied the flow patterns surrounding thefilament with a finite element simulation with different Reynolds number (Re) to understand the mechanism of propulsion. Thesimulation results provide information on the nature of flow patterns generated by swimming filament. Furthermore, the thrustforces from the simulation were compared with the thrust forces from theory. The simulation results are in good agreement withthe theoretical results.     

Enumeration of viable E. coli in rivers and wastewaters by fluorescent in situ hybridization

A combination of direct viable count (DVC) and fluorescent in situ hybridization (FISH) procedures was used to enumerate viable Escherichia coli in river waters and wastewaters. A probe specific for the 16S rRNA of E. coli labeled with the CY3 dye was used; enumeration of hybridized cells was performed by epifluorescence microscopy. Data showed that the method was able to accurately enumerate a minimum of 3000 viable E. coli among a large number of non-fecal bacteria. When applied to river water and wastewater samples, the DVC-FISH method gave systematically higher E. coli counts than a reference culture-based method (miniaturized MPN method). The ratio between both counts (DVC-FISH/MPN) increased with decreasing abundance of culturable E. coli indicating that the proportion of viable but non-culturable (VBNC) E. coli (detectable by the DVC-FISH procedure and not by a culture-based method) was higher in low contaminated environments. We hypothesized that the more stressing conditions, i.e. nutritional stress and sunlight effect, met in low contaminated environments were responsible for the larger fraction of VBNC E. coli. A survival experiment, in which sterile mineral water was inoculated with a pure E. coli strain and incubated, confirmed that stressing conditions induced the apparition of non-culturable E. coli detectable by the DVC-FISH procedure. The analysis of the E. coli concentration along a Seine river longitudinal profile downstream a large input of fecal bacteria by a WWTP outfall showed an increasing fraction of VBNC E. coli with increasing residence time of the E. coli in the river after release. These data suggest that the DVC-FISH method is useful tool to analyze the dynamics of fecal bacteria in river water.