Shuttle vectors for cloning recombinant DNA in Escherichia coli and Streptomyces griseofuscus C581.

The replicon of the Streptomyces plasmid SCP2 was located on a 5.9-kilobase EcoRI-SalI restriction fragment. The SCP2 replicon was combined with Escherichia coli plasmid pBR322 and genes specifying neomycin resistance and thiostrepton resistance in streptomycetes to construct shuttle vectors that are useful for cloning in E. coli and streptomycetes.     

Construction of an Escherichia coli-Rhodococcus shuttle vector and plasmid transformation in Rhodococcus spp.

A plasmid transformation system for Rhodococcus sp. strain H13-A was developed by using an Escherichia coli-Rhodococcus shuttle plasmid constructed in this study. Rhodococcus sp. strain H13-A contains three cryptic indigenous plasmids, designated pMVS100, pMVS200, and pMVS300, of 75, 19.5, and 13.4 kilobases (kb), respectively. A 3.8-kb restriction fragment of pMVS300 was cloned into pIJ30, a 6.3-kb pBR322 derivative, containing the E. coli origin of replication (ori) and ampicillin resistance determinant (bla), as well as a Streptomyces gene for thiostrepton resistance, tsr. The resulting 10.1-kb recombinant plasmid, designated pMVS301, was isolated from E. coli DH1(pMVS301) and transformed into Rhodococcus sp. strain AS-50, a derivative of strain H13-A, by polyethylene glycol-assisted transformation of Rhodococcus protoplasts and selection for thiostrepton-resistant transformants. Thiostrepton-resistant transformants were also ampicillin resistant and were shown to contain pMVS301, which was subsequently isolated and transformed back into E. coli. The cloned 3.8-kb fragment of Rhodococcus DNA in pMVS301 contains a Rhodococcus origin of replication, since the hybrid plasmid was capable of replication in both genera. The plasmid was identical in E. coli and Rhodococcus transformants as determined by restriction analysis and was maintained as a stable, independent replicon in both organisms. Optimization of the transformation procedure resulted in transformation frequencies in the range of 10(5) transformants per micrograms of pMVS301 DNA in Rhodococcus sp. strain H13-A and derivative strains. The plasmid host range extends to strains of Rhodococcus erythropolis, R. globulerus, and R. equi, whereas stable transformants were not obtained with R. rhodochrous or with several coryneform bacteria tested as recipients. A restriction map demonstrated 14 unique restriction sites in pMVS301, some of which are potentially useful for molecular cloning in Rhodococcus spp. and other actinomycetes. This is the first report of plasmid transformation and of heterologous gene expression in a Rhodococcus sp.     

A novel shuttle vector for Streptomyces spp. and Escherichia coli as a tool in site-directed mutagenesis.

This paper describes the construction and utilization of a novel shuttle vector for Streptomyces spp. and Escherichia coli as a useful vector in site-directed mutagenesis. The shuttle vector pIAFS20 (6.7 kb) has the following features: a replicon for Streptomyces spp., isolated from plasmid pIJ702; the thiostrepton-resistance gene as a selective marker in Streptomyces; the ColE1 origin, allowing replication in E. coli; and the ampicillin-resistance gene as a selective marker in E. coli. Vector pIAFS20 also contains the phage f1 intergenic region, which permits production of single-stranded DNA in E. coli after superinfection with helper phage M13K07. Moreover, the lac promoter is located in front of the multiple cloning sites cassette, allowing eventual expression of the cloned genes in E. coli. After mutagenesis and screening of the mutants in E. coli, the plasmids can be readily used to transform Streptomyces spp. As a demonstration, a 3.2-kb DNA fragment containing the gene encoding the xylanase A from Streptomyces lividans 1326 was inserted into pIAFS20, and the promoter region of this gene served as a target for site-directed mutagenesis. The two deletions reported here confirm the efficiency of this new vector as a tool in mutagenesis.     

Construction of a sequenced Clostridium perfringens-Escherichia coli shuttle plasmid.

A new Clostridium perfringens-Escherichia coli shuttle plasmid has been constructed and its complete DNA sequence compiled. The vector, pJIR418, contains the replication regions from the C. perfringens replicon pIP404 and the E. coli vector pUC18. The multiple cloning site and lacZ' gene from pUC18 are also present, which means that X-gal screening can be used to select recombinants in E. coli. Both chloramphenicol and erythromycin resistance can be selected in C. perfringens and E. coli since pJIR418 carries the C. perfringens catP and ermBP genes. Insertional inactivation of either the catP or ermBP genes can also be used to directly screen recombinants in both organisms. The versatility of pJIR418 and its applicability for the cloning of toxin genes from C. perfringens have been demonstrated by the manipulation of a cloned gene encoding the production of phospholipase C.     

Construction of pRES18 and pRES19, Streptomyces-Escherichia coli shuttle vectors carrying multiple cloning sites

Abstract We developed two Streptomyces-Escherichia coli shuttle vectors. The plasmid pRES102, consisting of the essential region of pRES1 and the thiostrepton resistance gene ( tsr ) fragment of pIJ702, was combined with the E. coli plasmid vector pUC18 or pUC19. The resulting shuttle vectors, designated pRES18 and pRES19, respectively, have relatively compact size (6.25 kb), low copy number, multiple cloning sites reciprocally arranged in opposite directions, and selection markers for both Streptomyces ( tsr ) and E. coli (β-lactamase ( bla ) and β-galactosidase ( lacZ )). These shuttle vectors are capable of carrying DNA fragments as long as 10 kb, of being maintained in S. griseus, S. lavendulae and S. lividans , and are compatible with pIJ702.     

Cloning and characterization of the replicon of the Nocardia italica plasmid, pNI100

A 19-kb plasmid, pNI100, was isolated from Nocardia italica CCRC12359; its replicon was cloned and characterized as having a single open reading frame (ORF) of 1188 bp specifying 396 amino acids (aa). Analyses of the deduced aa sequence of the Rep protein indicated that characteristics of three consensus sequences and a P-loop-like motif in the Rep protein of plasmid pSG5, a conjugative plasmid involving a rolling-circle replication mechanism, were conserved in those of plasmid pNI100. Phenotypically, a pock structure was produced in the regenerated mycelium by introducing pNI100 DNA into the Streptomyces lividans protoplast. This result strongly suggests that pNI100 is a conjugative plasmid and probably replicates by a rolling-circle replication mechanism. By using the replicon of pNI100, a bifunctional plasmid pNI105 that could replicate in both Escherichia coli and S. lividans was constructed and found to be a useful cloning shuttle vector.     

Development of a multifunctional and efficient conjugal plasmid for use in Streptomyces spp

A plasmid, pGB112, has recently been developed to transfer DNA from Escherichia coli to Streptomyces spp via conjugation. This technique made use of (A) E. coli replicon, (B) ampicillin (amp) resistance gene for selection in E. coli and thiostrepton (tsr) resistance gene for selection in Streptomyces, (C) a fragment of SCP2* replicon, (D) a 2.6 kb fragment of tra-cassette which consists of pIJ101 transfer gene (tra) and two ermE promoters, (E) a 0.8 kb fragment of oriT of (IncP) RK2. The results showed that this plasmid was able to transfer plasmid DNA from E. coli to Streptomyces coelicolor via conjugation, and that it could also transfer DNA between Streptomyces strains. Since this plasmid has both pBR322 and SCP2* replicons, it may provide a novel and useful method for genetic operation in E. coli and Streptomyces.An erratum to this article can be found at     

The Streptomyces plasmid SCP2*: its functional analysis and development into useful cloning vectors

Detailed restriction maps of the plasmid SCP2* and its deletion derivative pSCP103 were constructed. DNA fragments carrying hygromycin (Hyg), thiostrepton (Thio) or viomycin-resistance (VioR) determinants were inserted into pSCP103, and various segments were deleted from the resulting plasmids. Changes in plasmid phenotypes associated with these insertions and deletions allowed the localisation and characterisation of plasmid replication, stability, transfer and fertility functions. Several useful cloning vectors were constructed. They are able to maintain large (greater than 30 kb) DNA inserts, with stable inheritance at a low copy number (1-2 per chromosome) and without structural rearrangements, in Streptomyces hosts. The vectors have a broad host range in the genus Streptomyces. One of them (pIJ903) is a shuttle vector for Streptomyces and Escherichia coli.     

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.     

The linear plasmid SCP1 of Streptomyces coelicolor A3(2) possesses a centrally located replication origin and shows significant homology to the transposon Tn4811.

The linear plasmid SCP1 of Streptomyces coelicolor A3(2) is one of the genetically more studied linear streptomycete replicons. Although the genetics of SCP1 and its interaction with the host chromosome have been analyzed for nearly three decades no information exists on its replication. With the help of an ordered cosmid contig for the complete 360-kb element, we have localized a 5439-bp fragment from the central region that confers autonomous replication in Streptomyces lividans. The minimal origin contains two overlapping ORFs which are separated from an AT-rich region which might correspond to the replication start point. ORF1 revealed intensive similarity to a class of DNA-primase/helicases of actinophages and archael plasmids. In addition, we have identified a region in both terminal inverted repeats of SCP1 that shows significant homology to the transposable element Tn4811 located near the ends of the S. lividans 66 chromosome.     

Properties and construction of plasmid pFW213, a shuttle vector with the oral Streptococcus origin of replication

Streptococcus parasanguinis is among the most successful colonizers of the human body. Strain FW213 harbors a 7.0-kb cryptic plasmid, pFW213, with a copy number at 5 to 10 per chromosome. Sequence and functional analyses of pFW213 revealed that the open reading frame (ORF) encoding the replication protein (Rep) is essential for the replication of pFW213, and the putative plasmid addiction system (RelB and RelE) and an ORF (ORF6) with no known function are required for its stability. The minimal replicon of pFW213 contains the rep gene and its 5'-flanking 390-bp region. Within the minimal replicon, an A/T-rich region followed by 5 contiguous 22-bp repeats was located 5' of the ATG of rep. No single-stranded replication intermediates were detected in the derivatives of pFW213, suggesting that pFW213 replicates via the theta replication mechanism. The minimal replicon was unstable in streptococcal hosts without selection, but the stability was greatly enhanced in derivatives containing the intact relBE genes. A Streptococcus-Escherichia coli shuttle vector, pCG1, was constructed with the pFW213 replicon. Plasmid pCG1 features a multiple cloning region and a spectinomycin resistance determinant that is expressed in both Streptococcus spp. and E. coli. Various streptococcal DNA fragments were cloned in pCG1, and the recombinant constructs were stably maintained in the streptococcal hosts. Since pCG1 is compatible with the most widely used streptococcal replicon, pVA380-1, pCG1 will provide a much needed tool allowing the cloning of two genes that work in concert in the same host.     

Two versatile shuttle vectors for Thermus thermophilus-Escherichia coli containing multiple cloning sites, lacZα gene and kanamycin or hygromycin resistance marker

Two versatile shuttle vectors for Thermus thermophilus and Escherichia coli were developed on the basis of the T. thermophilus cryptic plasmid pTT8 and E. coli vector pUC13. These shuttle vectors, pTRK1T and pTRH1T, carry a gene encoding a protein homologous to replication protein derived from pTT8, a replicon for E. coli, new multiple cloning sites and a lacZα gene from E. coli vector pUC13, and also have a gene encoding a thermostable protein that confers resistance to kanamycin or hygromycin, which can be used as a selection marker in T. thermophilus. These shuttle vectors are useful to develop enzymes and proteins of biotechnological interest. We also constructed a plasmid, pUC13T, which carries the same multiple cloning sites of pTRK1T and pTRH1T. These vectors should facilitate cloning procedures both in E. coli and T. thermophilus.     

Characterization, cloning, curing, and distribution in lactic acid bacteria of pLP1, a plasmid from Lactobacillus plantarum CCM 1904 and its use in shuttle vector construction

A small 2.1-kb plasmid called pLP1 was extracted from Lactobacillus plantarum CCM 1904 (ATCC 8014) and cloned into the Escherichia coli pUC19 plasmid. As determined by DNA-DNA Southern hybridization with a pLP1-radioactively labeled probe, other lactic acid bacteria such as L. curvatus, L. sake, Carnobacterium, and Leuconostoc mesenteroides harbor pLP1-related plasmids. Shuttle vectors based on the pLP1 replicon were constructed by inserting the erythromycin-resistance gene from pVA891 into the various pUC19-pLP1 constructions. pLP1-based shuttle vector transformation efficiencies (TE) by electroporation were compared to TE of a broad-host-range plasmid pGK12 in different lactobacilli strains. Expression of the pUC19-pLP1 plasmids in Escherichia coli maxicells showed that pLP1 encodes for a 37,000 MW protein which can act in trans allowing the replication of plasmids in which this protein is truncated. The pLP1-based shuttle vectors producing this protein replicate in lactobacilli and also in Bacillus subtilis. A pLP1-free strain was obtained by incompatibility with a pLP1-based shuttle vector introduced in L. plantarum CCM 1904 by electroporation. The absence of pLP1 has no incidence on the strain phenotype suggesting that pLP1 is not essential for the strain in our laboratory conditions.     

The minimal replicon of the Streptomyces ghanaensis plasmid pSG5 identified by subcloning and Tn5 mutagenesis

Summary The cryptic plasmid pSG5 of Streptomyces ghanaensis 5/1B (DSM 2932) was characterized to have a molecular size of 12.7 kb and an approximate copy number of 20–50 per chromosome. A bifunctional derivative, designated pSW344E, consisting of pSG5 and an Escherichia coli vector plasmid was constructed. Following Tn5 mutagenesis in E. coli, the replication functions of the mutagenized pSW344E plasmids were analysed in S. lividans. A 2 kb DNA fragment of the pSG5 replicon was found to carry replication functions. Subcloning of pSG5 DNA into various replication probe vectors resulted in the identification of the pSG5 minimal replicon, identical to the above mentioned 2 kb DNA region. Several small bifunctional plasmids, able to replicate in E. coli as well as in Streptomyces, were generated during subcloning. Some of these plasmids were found to be useful shuttle vectors.     

Partial characterization of a small, multiple-copy plasmid from Streptomyces espinosus and the derivation of a high copy-number deletion mutant

An organism classified as Streptomyces espinosus was found to carry an approx. 9.2-kb plasmid. This plasmid, designated pUC6, has a copy number of 30-40 per host genome equivalent. Plasmid pUC1061, a copy-number mutant of pUC6, was isolated after in vitro deletion of an approx. 2.0-kb XhoI restriction fragment. Plasmid pUC1061 has a copy number of 500-600. Plasmid pUC1061 appears to be incompatible with pUC6 and will transform a pUC6-containing culture at a frequency of approx. 1%. The sizes, restriction maps and copy numbers of plasmids pUC6 and pUC1061 indicate these may be valuable vectors for gene cloning Streptomyces.     

Characterization of the stable maintenance properties of the par region of broad-host-range plasmid RK2.

A 3.2-kb fragment encoding five genes, parCBA/DE, in two divergently transcribed operons promotes stable maintenance of the replicon of the broad-host-range plasmid RK2 in a vector-independent manner in Escherichia coli. The parDE operon has been shown to contribute to stabilization through the postsegregational killing of plasmid-free daughter cells, while the parCBA operon encodes a resolvase, ParA, that mediates the resolution of plasmid multimers through site-specific recombination. To date, evidence indicates that multimer resolution alone does not play a significant role in RK2 stable maintenance by the parCBA operon in E. coli. It has been proposed, instead, that the parCBA region encodes an additional stability mechanism, a partition system, that ensures that each daughter cell receives a plasmid copy at cell division. However, studies carried out to date have not directly determined the plasmid stabilization activity of the parCBA operon alone. An assessment was made of the relative contributions of postsegregational killing (parDE) and the putative partitioning system (parCBA) to the stabilization of mini-RK2 replicons in E. coli. Mini-RK2 replicons carrying either the entire 3.2-kb (parCBA/DE) fragment or the 2.3-kb parCBA region alone were found to be stably maintained in two E. coli strains tested. The stabilization found is not due to resolution of multimers. The stabilizing effectiveness of parCBA was substantially reduced when the plasmid copy number was lowered, as in the case of E. coli cells carrying a temperature-sensitive mini-RK2 replicon grown at a nonpermissive temperature. The presence of the entire 3.2-kb region effectively stabilized the replicon, however, under both low- and high-copy-number-conditions. In those instances of decreased plasmid copy number, the postsegregational killing activity, encoded by parDE, either as part of the 3.2-kb fragment or alone played the major role in the stabilization of mini-RK2 replicons within the growing bacterial population. Our findings indicate that the parCBA operon functions to stabilize by a mechanism other than cell killing and resolution of plasmid multimers, while the parDE operon functions solely to stabilize plasmids by cell killing. The relative contribution of each system to stabilization depends on plasmid copy number and the particular E. coli host.     

Analysis of a region in plasmid R386 containing two functional replicons

A miniplasmid has been obtained from R386 by ligating EcoRI fragments with a fragment carrying a kanamycin-resistance gene. It contains a 6.8-kb Eco fragment of R386 which hybridizes strongly with several IncFI plasmid DNAs but not with the primary or secondary replicons of the F plasmid. This mini-R386 is incompatible with certain IncFI plasmids, and it appears to be one example of a previously unidentified replicon widely distributed in the IncFI group. A region of R386 not closely linked to the 6.8-kb fragment is involved in copy number control of the mini-R386, and a sequence in the same region interacts with mini-F partition functions to cause incompatibility. The 6.8-kb fragment also restricts growth of T7 bacteriophage, and an adjacent fragment restricts phage T4 growth. A further R386 sequence, sharing homology with the F secondary replicon, is capable of autonomous replication. Hence R386, like F, contains at least two functional replicons.     

大肠杆菌-链霉菌高效接合载体的构建及其应用

以链霉菌质粒SCP2^*的衍生质粒pHJL400为基础,构建了能够在大肠杆菌到链霉菌之间进行高效接合转移的质粒DGH112。pGH112含有在大肠杆菌和链霉菌中复制起始位点,以及分别在大肠杆菌和链霉菌中进行筛选的抗性标记。用pGH112转化Escherichia coli ET12567(pUZ8002)后,与天蓝链霉菌(Streptomyces coelicolor A3(2))、除虫链霉菌(Streptomyces avermitilis)、变铅青链霉菌(Streptomyces lividans TK54)、毒三素链霉菌(Streptomyces toxytricini NRRL15443)、委内瑞拉链霉菌(Streptomyces．vertezuelae ISP5230)和红色糖多孢菌(Saccharopolypora erythraea)进行接合,发现本构建的pGH112与pKC1139相比,接合转移效率较高,稳定性好,而且宿主范围较广。把组成型启动子ermE^*与绿色荧光蛋白基因(gfp)克隆到本构建的pGH112,通过接合转移到链霉菌中,gfp获得表达,证明其可以用作基因接合转移的有效工具载体,这为研究链霉菌的基因功能创造了有利条件。     

The Linear Plasmid SCP1 of Streptomyces coelicolor A3(2) Possesses a Centrally Located Replication Origin and Shows Significant Homology to the Transposon Tn4811

The linear plasmid SCP1 of Streptomyces coelicolor A3(2) is one of the genetically more studied linear streptomycete replicons. Although the genetics of SCP1 and its interaction with the host chromosome have been analyzed for nearly three decades no information exists on its replication. With the help of an ordered cosmid contig for the complete 360-kb element, we have localized a 5439-bp fragment from the central region that confers autonomous replication in Streptomyces lividans. The minimal origin contains two overlapping ORFs which are separated from an AT-rich region which might correspond to the replication start point. ORF1 revealed intensive similarity to a class of DNA-primase/helicases of actinophages and archael plasmids. In addition, we have identified a region in both terminal inverted repeats of SCP1 that shows significant homology to the transposable element Tn4811 located near the ends of the S. lividans 66 chromosome.