High level expression of Acidothermus cellulolyticus β-1, 4-endoglucanase in transgenic rice enhances the hydrolysis of its straw by cultured cow gastric fluid

Background

In the hydrolysis of lignocellulosic materials, thermostable enzymes decrease the amount of enzyme needed due to higher specific activity and elongate the hydrolysis time due to improved stability. For cost-efficient use of enzymes in large-scale industrial applications, high-level expression of enzymes in recombinant hosts is usually a prerequisite. The main aim of the present study was to compare the biochemical and hydrolytic properties of two thermostable recombinant glycosyl hydrolase families 10 and 11 (GH10 and GH11, respectively) xylanases with respect to their potential application in the hydrolysis of lignocellulosic substrates.

Results

The xylanases from Nonomuraea flexuosa (Nf Xyn11A) and from Thermoascus aurantiacus (Ta Xyn10A) were purified by heat treatment and gel permeation chromatography. Ta Xyn10A exhibited higher hydrolytic efficiency than Nf Xyn11A toward birchwood glucuronoxylan, insoluble oat spelt arabinoxylan and hydrothermally pretreated wheat straw, and it produced more reducing sugars. Oligosaccharides from xylobiose to xylopentaose as well as higher degree of polymerization (DP) xylooligosaccharides (XOSs), but not xylose, were released during the initial hydrolysis of xylans by Nf Xyn11A, indicating its potential for the production of XOS. The mode of action of Nf Xyn11A and Ta Xyn10A on glucuronoxylan and arabinoxylan showed typical production patterns of endoxylanases belonging to GH11 and GH10, respectively.

Conclusions

Because of its high catalytic activity and good thermostability, T. aurantiacus xylanase shows great potential for applications aimed at total hydrolysis of lignocellulosic materials for platform sugars, whereas N. flexuosa xylanase shows more significant potential for the production of XOSs.     

Modular glucuronoxylan-specific xylanase with a family CBM35 carbohydrate-binding module

Xyn30D from the xylanolytic strain Paenibacillus barcinonensis has been identified and characterized. The enzyme shows a modular structure comprising a catalytic module family 30 (GH30) and a carbohydrate-binding module family 35 (CBM35). Like GH30 xylanases, recombinant Xyn30D efficiently hydrolyzed glucuronoxylans and methyl-glucuronic acid branched xylooligosaccharides but showed no catalytic activity on arabinose-substituted xylans. Kinetic parameters of Xyn30D were determined on beechwood xylan, showing a K(m) of 14.72 mg/ml and a k(cat) value of 1,510 min(-1). The multidomain structure of Xyn30D clearly distinguishes it from the GH30 xylanases characterized to date, which are single-domain enzymes. The modules of the enzyme were individually expressed in a recombinant host and characterized. The isolated GH30 catalytic module showed specific activity, mode of action on xylan, and kinetic parameters that were similar to those of the full-length enzyme. Computer modeling of the three-dimensional structure of Xyn30D showed that the catalytic module is comprised of a common (β/α)(8) barrel linked to a side-associated β-structure. Several derivatives of the catalytic module with decreasing deletions of this associated structure were constructed. None of them showed catalytic activity, indicating the importance of the side β-structure in the catalysis of Xyn30D. Binding properties of the isolated carbohydrate-binding module were analyzed by affinity gel electrophoresis, which showed that the CBM35 of the enzyme binds to soluble glucuronoxylans and arabinoxylans. Analysis by isothermal titration calorimetry showed that CBM35 binds to glucuronic acid and requires calcium ions for binding. Occurrence of a CBM35 in a glucuronoxylan-specific xylanase is a differential trait of the enzyme characterized.     

Cloning and enzymatic characterization of four thermostable fungal endo-1,4-β-xylanases

Endo-1,4-β-xylanases (EC 3.2.1.8) hydrolyze the 1,4-β-D-xylosidic linkages in xylans, the most abundant hemicellulose in plant cell walls. Xylanase enzymes have numerous industrial applications, including the manufacturing of animal feed, bread, juice and wine, pulp and paper, and biofuels. In this study, two glycosyl hydrolase family 10 members designated GtXyn10A and GtXyn10B and two glycosyl hydrolase family 11 members, OpXyn11A and CcXyn11C, were functionally expressed and subjected to biochemical characterization. The K _M , V _max, and k _cat values of the four xylanases, determined using birchwood xylan, ranged from 0.27 to 1.1 mg/mL, 130 to 980 μmol/min/mg, and 109 to 344 s^?1, respectively, where OpXyn11A gave the highest and GtXyn10B the lowest values for all three parameters. Substrate specificity studies and analysis of the products released during the degradation of xylo-oligosaccharides and three types of xylan revealed significant differences in catalytic properties, particularly between OpXyn11A and the other xylanases and between the family 10 and the family 11 xylanases. Molecular modeling suggests that the unique substrate specificity of OpXyn11A can be attributed to the presence of a serine rather that an asparagine or aspartate residue at the +1 substrate binding site. Additionally, all four xylanases exhibited biochemical characteristics of interest for various commercial applications.     

Structural Insights into the Specificity of Xyn10B from Paenibacillus barcinonensis and Its Improved Stability by Forced Protein Evolution

Paenibacillus barcinonensis is a soil bacterium bearing a complex set of enzymes for xylan degradation, including several secreted enzymes and Xyn10B, one of the few intracellular xylanases reported to date. The crystal structure of Xyn10B has been determined by x-ray analysis. The enzyme folds into the typical (β/α)₈ barrel of family 10 glycosyl hydrolases (GH10), with additional secondary structure elements within the β/α motifs. One of these loops -L7- located at the β7 C terminus, was essential for xylanase activity as its partial deletion yielded an inactive enzyme. The loop contains residues His²⁴⁹–Glu²⁵⁰, which shape a pocket opened to solvent in close proximity to the +2 subsite, which has not been described in other GH10 enzymes. This wide cavity at the +2 subsite, where methyl-2,4-pentanediol from the crystallization medium was found, is a noteworthy feature of Xyn10B, as compared with the narrow crevice described for other GH10 xylanases. Docking analysis showed that this open cavity can accommodate glucuronic acid decorations of xylo-oligosaccharides. Co-crystallization experiments with conduramine derivative inhibitors supported the importance of this open cavity at the +2 subsite for Xyn10B activity. Several mutant derivatives of Xyn10B with improved thermal stability were obtained by forced evolution. Among them, mutant xylanases S15L and M93V showed increased half-life, whereas the double mutant S15L/M93V exhibited a further increase in stability, showing a 20-fold higher heat resistance than the wild type xylanase. All the mutations obtained were located on the surface of Xyn10B. Replacement of a Ser by a Leu residue in mutant xylanase S15L can increase hydrophobic packing efficiency and fill a superficial indentation of the protein, giving rise to a more compact structure of the enzyme.     

Understanding the structural basis for substrate and inhibitor recognition in eukaryotic GH11 xylanases

Endo-β1,4-xylanases (xylanases) hydrolyse the β1,4 glycosidic bonds in the backbone of xylan. Although xylanases from glycoside hydrolase family 11 (GH11) have been extensively studied, several issues remain unresolved. Thus, the mechanism by which these enzymes hydrolyse decorated xylans is unclear and the structural basis for the variation in catalytic activity within this family is unknown. Furthermore, the mechanism for the differences in the inhibition of fungal GH11 enzymes by the wheat protein XIP-I remains opaque. To address these issues we report the crystal structure and biochemical properties of the Neocallimastix patriciarum xylanase NpXyn11A, which displays unusually high catalytic activity and is one of the few fungal GH11 proteins not inhibited by XIP-I. Although the structure of NpXyn11A could not be determined in complex with substrates, we have been able to investigate how GH11 enzymes hydrolyse decorated substrates by solving the crystal structure of a second GH11 xylanase, EnXyn11A (encoded by an environmental DNA sample), bound to ferulic acid-1,5-arabinofuranose-α1,3-xylotriose (FAX₃). The crystal structure of the EnXyn11A-FAX₃ complex shows that solvent exposure of the backbone xylose O2 and O3 groups at subsites −3 and +2 allow accommodation of α1,2-linked 4-methyl-D-glucuronic acid and L-arabinofuranose side chains. Furthermore, the ferulated arabinofuranose side chain makes hydrogen bonds and hydrophobic interactions at the +2 subsite, indicating that the decoration may represent a specificity determinant at this aglycone subsite. The structure of NpXyn11A reveals potential −3 and +3 subsites that are kinetically significant. The extended substrate-binding cleft of NpXyn11A, compared to other GH11 xylanases, may explain why the Neocallimastix enzyme displays unusually high catalytic activity. Finally, the crystal structure of NpXyn11A shows that the resistance of the enzyme to XIP-I is not due solely to insertions in the loop connecting β strands 11 and 12, as suggested previously, but is highly complex.     

High resolution structure and sequence of T. aurantiacus xylanase I: implications for the evolution of thermostability in family 10 xylanases and enzymes with (beta)alpha-barrel architecture.

Xylanase I is a thermostable xylanase from the fungus Thermoascus aurantiacus, which belongs to family 10 in the current classification of glycosyl hydrolases. We have determined the three-dimensional X-ray structure of this enzyme to near atomic resolution (1.14 A) by molecular replacement, and thereby corrected the chemically determined sequence previously published. Among the five members of family 10 enzymes for which the structure has been determined, Xylanase I from T. aurantiacus and Xylanase Z from C. thermocellum are from thermophilic organisms. A comparison with the three other available structures of the family 10 xylanases from mesophilic organisms suggests that thermostability is effected mainly by improvement of the hydrophobic packing, favorable interactions of charged side chains with the helix dipoles and introduction of prolines at the N-terminus of helices. In contrast to other classes of proteins, there is very little evidence for a contribution of salt bridges to thermostability in the family 10 xylanases from thermophiles. Further analysis of the structures of other proteins from thermophiles with eight-fold (beta)alpha-barrel architecture suggests that favorable interactions of charged side chains with the helix dipoles may be a common way in which thermophilic proteins with this fold are stabilized. As this is the most common type of protein architecture, this finding may provide a useful guide for site-directed mutagenesis aimed to improve the thermostability of (beta)alpha-barrel proteins. Proteins 1999;36:295-306.     

On the Modes of Action of Three Xylanases Produced by a Strain of Aspergillus niger van Tieghem

The modes of action of three xylanases (I, II and III) produced by Aspergillus niger van Tieghem on several substrates were investigated. Xylanase I possesed the strongest activity against xylooligosaccharides among the three enzymes and converted them into xylose and xylobiose. Xylanase II and III catalyzed a glycosylating reaction and produced higher polymerized xylooligosaccharides from xylotetraose or xylopentaose. Among three enzymes, xylanase II could split α1,3-arabinofuranosidic bond of arabinose-xylose mixed oligosaccharides.

In the case of hydrolysis by three xylanases on xylan and arabinoxylan, the maximum hydrolysis degree and the reaction products were compared with each other. From the results, some speculation were made concerning the modes of action of the enzymes.     

Structural insights of RmXyn10A – A prebiotic-producing GH10 xylanase with a non-conserved aglycone binding region

Hydrolysis of arabinoxylan (AX) by glycoside hydrolase family 10 (GH10) xylanases produces xylo- and arabinoxylo-oligosaccharides ((A)XOS) which have shown prebiotic effects. The thermostable GH10 xylanase RmXyn10A has shown great potential to produce (A)XOS. In this study, the structure of RmXyn10A was investigated, the catalytic module by homology modelling and site-directed mutagenesis and the arrangement of its five domains by small-angle X-ray scattering (SAXS). Substrate specificity was explored in silico by manual docking and molecular dynamic simulations. It has been shown in the literature that the glycone subsites of GH10 xylanases are well conserved and our results suggest that RmXyn10A is no exception. The aglycone subsites are less investigated, and the modelled structure of RmXyn10A suggests that loop β₆α₆ in the aglycone part of the active site contains a non-conserved α-helix, which blocks the otherwise conserved space of subsite +2. This structural feature has only been observed for one other GH10 xylanase. In RmXyn10A, docking revealed two alternative binding regions, one on either side of the α-helix. However, only one was able to accommodate arabinose-substitutions and the mutation study suggests that the same region is responsible for binding XOS. Several non-conserved structural features are most likely to be responsible for providing affinity for arabinose-substitutions in subsites +1 and +2. The SAXS rigid model of the modular arrangement of RmXyn10A displays the catalytic module close to the cell-anchoring domain while the carbohydrate binding modules are further away, likely explaining the observed lack of contribution of the CBMs to activity.     

AFM studies of water-soluble wheat arabinoxylans--effects of esterase treatment

The degradation products of water-soluble wheat arabinoxylans treated with Aspergillus niger ferulic acid esterase (FAEA-able to cleave 5,5'- and 8-O-4'-ferulic acid dimers) have been characterised by atomic force microscopy (AFM) and size exclusion chromatography. The AFM images of arabinoxylans confirmed that a small proportion ( approximately 15%) of the population of arabinoxylan molecules contain xylan-based branches attached to the xylan-based backbone. Treatment with FAEA reduced the contour length of the molecules suggesting that certain dimeric ferulic acid linkages may play a previously unconfirmed role in the elongation of arabinoxylans. Overnight treatment with FAEA led to a reduction in the density of branches suggesting that they may also be linked to the backbone through phenolic linkages.     

Molecular and biochemical characterization of two xylanase-encoding genes from Cellulomonas pachnodae.

Two xylanase-encoding genes, named xyn11A and xyn10B, were isolated from a genomic library of Cellulomonas pachnodae by expression in Escherichia coli. The deduced polypeptide, Xyn11A, consists of 335 amino acids with a calculated molecular mass of 34,383 Da. Different domains could be identified in the Xyn11A protein on the basis of homology searches. Xyn11A contains a catalytic domain belonging to family 11 glycosyl hydrolases and a C-terminal xylan binding domain, which are separated from the catalytic domain by a typical linker sequence. Binding studies with native Xyn11A and a truncated derivative of Xyn11A, lacking the putative binding domain, confirmed the function of the two domains. The second xylanase, designated Xyn10B, consists of 1,183 amino acids with a calculated molecular mass of 124,136 Da. Xyn10B also appears to be a modular protein, but typical linker sequences that separate the different domains were not identified. It comprises a N-terminal signal peptide followed by a stretch of amino acids that shows homology to thermostabilizing domains. Downstream of the latter domain, a catalytic domain specific for family 10 glycosyl hydrolases was identified. A truncated derivative of Xyn10B bound tightly to Avicel, which was in accordance with the identified cellulose binding domain at the C terminus of Xyn10B on the basis of homology. C. pachnodae, a (hemi)cellulolytic bacterium that was isolated from the hindgut of herbivorous Pachnoda marginata larvae, secretes at least two xylanases in the culture fluid. Although both Xyn11A and Xyn10B had the highest homology to xylanases from Cellulomonas fimi, distinct differences in the molecular organizations of the xylanases from the two Cellulomonas species were identified.     

Improving the alkalophilic performances of the Xyl1 xylanase from Streptomyces sp. S38: structural comparison and mutational analysis

Endo-beta-1,4-xylanases of the family 11 glycosyl-hydrolases are catalytically active over a wide range of pH. Xyl1 from Streptomyces sp. S38 belongs to this family, and its optimum pH for enzymatic activity is 6. Xyn11 from Bacillus agaradhaerens and XylJ from Bacillus sp. 41M-1 share 85% sequence identity and have been described as highly alkalophilic enzymes. In an attempt to better understand the alkalophilic adaptation of xylanases, the three-dimensional structures of Xyn11 and Xyl1 were compared. This comparison highlighted an increased number of salt-bridges and the presence of more charged residues in the catalytic cleft as well as an eight-residue-longer loop in the alkalophilic xylanase Xyn11. Some of these charges were introduced in the structure of Xyl1 by site-directed mutagenesis with substitutions Y16D, S18E, G50R, N92D, A135Q, E139K, and Y186E. Furthermore, the eight additional loop residues of Xyn11 were introduced in the homologous loop of Xyl1. In addition, the coding sequence of the XylJ catalytic domain was synthesized by recursive PCR, expressed in a Streptomyces host, purified, and characterized together with the Xyl1 mutants. The Y186E substitution inactivated Xyl1, but the activity was restored when this mutation was combined with the G50R or S18E substitutions. Interestingly, the E139K mutation raised the optimum pH of Xyl1 from 6 to 7.5 but had no effect when combined with the N92D substitution. Modeling studies identified the possible formation of an interaction between the introduced lysine and the substrate, which could be eliminated by the formation of a putative salt-bridge in the N92D/E139K mutant.     

Exploring Multimodularity in Plant Cell Wall Deconstruction: STRUCTURAL AND FUNCTIONAL ANALYSIS OF Xyn10C CONTAINING THE CBM22-1–CBM22-2 TANDEM*

Elucidating the molecular mechanisms regulating multimodularity is a challenging task. Paenibacillus barcinonensis Xyn10C is a 120-kDa modular enzyme that presents the CBM22/GH10/CBM9 architecture found in a subset of large xylanases. We report here the three-dimensional structure of the Xyn10C N-terminal region, containing the xylan-binding CBM22-1–CBM22-2 tandem (Xyn10C-XBD), which represents the first solved crystal structure of two contiguous CBM22 modules. Xyn10C-XBD is folded into two separate CBM22 modules linked by a flexible segment that endows the tandem with extraordinary plasticity. Each isolated domain has been expressed and crystallized, and their binding abilities have been investigated. Both domains contain the R(W/Y)YYE motif required for xylan binding. However, crystallographic analysis of CBM22-2 complexes shows Trp-308 as an additional binding determinant. The long loop containing Trp-308 creates a platform that possibly contributes to the recognition of precise decorations at subsite S2. CBM22-2 may thus define a subset of xylan-binding CBM22 modules directed to particular regions of the polysaccharide. Affinity electrophoresis reveals that Xyn10C-XBD binds arabinoxylans more tightly, which is more apparent when CBM22-2 is tested against highly substituted xylan. The crystal structure of the catalytic domain, also reported, shows the capacity of the active site to accommodate xylan substitutions at almost all subsites. The structural differences found at both Xyn10C-XBD domains are consistent with the isothermal titration calorimetry experiments showing two sites with different affinities in the tandem. On the basis of the distinct characteristics of CBM22, a delivery strategy of Xyn10C mediated by Xyn10C-XBD is proposed.     

Molecular and Biochemical Characterization of Two Xylanase-Encoding Genes from Cellulomonas pachnodae

Two xylanase-encoding genes, named xyn11A and xyn10B, were isolated from a genomic library of Cellulomonas pachnodae by expression in Escherichia coli. The deduced polypeptide, Xyn11A, consists of 335 amino acids with a calculated molecular mass of 34,383 Da. Different domains could be identified in the Xyn11A protein on the basis of homology searches. Xyn11A contains a catalytic domain belonging to family 11 glycosyl hydrolases and a C-terminal xylan binding domain, which are separated from the catalytic domain by a typical linker sequence. Binding studies with native Xyn11A and a truncated derivative of Xyn11A, lacking the putative binding domain, confirmed the function of the two domains. The second xylanase, designated Xyn10B, consists of 1,183 amino acids with a calculated molecular mass of 124,136 Da. Xyn10B also appears to be a modular protein, but typical linker sequences that separate the different domains were not identified. It comprises a N-terminal signal peptide followed by a stretch of amino acids that shows homology to thermostabilizing domains. Downstream of the latter domain, a catalytic domain specific for family 10 glycosyl hydrolases was identified. A truncated derivative of Xyn10B bound tightly to Avicel, which was in accordance with the identified cellulose binding domain at the C terminus of Xyn10B on the basis of homology. C. pachnodae, a (hemi)cellulolytic bacterium that was isolated from the hindgut of herbivorous Pachnoda marginata larvae, secretes at least two xylanases in the culture fluid. Although both Xyn11A and Xyn10B had the highest homology to xylanases from Cellulomonas fimi, distinct differences in the molecular organizations of the xylanases from the two Cellulomonas species were identified.     

Factors affecting xylanase functionality in the degradation of arabinoxylans

Endo-beta-1,4-xylanases are key enzymes in the degradation of arabinoxylans, the main non-starch polysaccharides from grain cell walls. Due to the heterogeneity of arabinoxylans, xylanases with different characteristics are required in industrial applications but the choice of the enzyme is still largely empirical. Although the classification into glycoside hydrolase families greatly helped to derive mechanistic information on the catalytic and substrate specificity of xylanases, other factors e.g. their sensitivity to endogenous inhibitors, the presence of carbohydrate-binding module(s) and their degree of selectivity towards soluble versus insoluble substrate may play a role in determining the functionality of these enzymes in the degradation of arabinoxylans.     

Assimilatory nitrate reductase: lysine 741 participates in pyridine nucleotide binding via charge complementarity

The effects of benzyl (BITC) and phenethyl isothiocyanate (PEITC) on the activity of a P450 2E1 mutant where the conserved threonine at position 303 was replaced with an alanine residue (P450 2E1 T303A) were examined. PEITC inactivated the mutant enzyme with a K(I) of 1.6 microM. PEITC also inactivated the wild-type P450 2E1 as efficiently with a K(I) of 2.7 microM. The inactivation was entirely dependent on NADPH and followed pseudo-first-order kinetics. Previously we reported the mechanism-based inactivation of wild-type P450 2E1 by BITC with a K(I) of 13 microM. In contrast to the wild-type enzyme, the P450 2E1 T303A mutant was not inactivated by BITC but it was inhibited in a competitive manner with a K(i) of 3 microM. The binding constants determined by spectral binding studies were similar for both enzymes. The binding of BITC produced characteristic Type I spectral changes in the wild-type and mutant enzyme. A radiolabeled BITC metabolite bound to P450 2E1 and to P450 2E1 T303A when both enzymes were incubated with [(14)C]BITC and NADPH. Whole protein electrospray ion trap mass spectrometry indicated that a mass consistent with one molecule of benzylisocyanate and oxygen was adducted to the wild-type enzyme. The mass adducted to the T303A mutant was consistent with the addition of one hydroxylated BITC or of one benzylisocyanate moiety and one sulfur molecule. Analysis of the metabolites of BITC indicated that each enzyme produced similar metabolites but that the mutant enzyme generated significantly higher amounts of benzaldehyde and benzoic acid when compared to the wild-type enzyme.     

Studies of two low-molecular-weight endo-1(1→4)-β-d-xylanases constitutively synthesised by the cellulolytic fungus Trichoderma koningii

Two endo-(1→4)-β-d-xylanases (xylanases 1 and 2), which were constitutively synthesised by the fungus Trichoderma koningii, were purified to homogeneity on gel-filtration media and by isoelectric focusing. They had molecular weights of 29,000 (xylanase 1) and 18,000 (xylanase 2), and isoelectric pHs of 7.24 (xylanase 1) and 7.3 (xylanase 2); neither enzyme was associated with carbohydrate. Xylanase 1 had an optimum at the remarkably high temperature of 60–65°. Each enzyme liberated a different range of oligosaccharides from oat-straw arabinoxylan, but only xylanase 1 released l-arabinose and d-xylose. Both xylanases were free from cellulase activity.     

酸性木聚糖酶XynⅡ活性中心关键氨基酸残基的鉴定

目的:鉴定来源于宇佐美曲霉(Aspergillus usamii)E001的酸性木聚糖酶XynⅡ活性中心关键氨基酸残基。方法:对XynⅡ进行SWISS-MODEL同源建模和BLAST序列比较,分析XynⅡ中所有可能作为催化残基的保守氨基酸,采用定点突变手段对其进行鉴定研究。结果:只有Glu-79和Glu-170位于酶与底物作用的活性中心,它们分别位于β折叠股B6和B4上,推测Glu-79和Glu-170为XynⅡ活性中心关键氨基酸残基。将Glu-79和Glu-170突变为酸性的Gln,突变酶E79Q,E170Q在大肠杆菌和毕赤酵母中表达后,活性均丧失。结论:79位、170位Glu是木聚糖酶XynⅡ活性中心的关键氨基酸残基,为该酶进一步的结构与功能研究提供了理论基础。