Sporulation in Bacillus subtilis. Morphological changes

1. When Bacillus subtilis was grown in a medium in which sporulation occurred well-defined morphological changes were seen in thin sections of the cells. 2. Over a period of 7.5hr. beginning 2hr. after the initiation of sporulation the following major stages were observed: axial nuclear-filament formation, spore-septum formation, release of the fore-spore within the cell, development of the cortex around the fore-spore, the laying down of the spore coat and the completion of the corrugated spore coat before release of the spore from the mother cell. 3. The appearance of refractile bodies and 2,6-dipicolinic acid and the development of heat-resistance began between 5 and 6.5hr. after initiation of sporulation. 4. The appearance of 2,6-dipicolinic acid and the onset of refractility appeared to coincide with a diminution of electron density in the spore core and cortex. 5. Heat-resistance was associated with the terminal stage, the completion of the spore coat. 6. The spore coat was composed of an inner and an outer layer, each of which consisted of three or four electron-dense laminae. 7. Serial sections through cells at an early stage of sporulation showed that the membranes of each spore septum were always continuous with the membranes of a mesosome, which was itself in close contact with the bacterial or spore nucleoid. 8. These changes were correlated with biochemical events occurring during sporulation.     

Influence of medium composition on sporulation byStreptomyces coelicolor A3(2) grown on defined solid media

Summary Reproducible sporulation using solid-plate cultures ofStreptomyces coelicolor A3(2) was obtained on a defined medium with glucose as the primary source of carbon and sodium nitrate as the sole source of nitrogen. The type of agar used as a solidifying agent, and the inclusion of trace salts to the medium, significantly affected sporulation. An interrelationship between the medium carbon to nitrogen ratio and sporulation was observed, with clear promotion of spore formation under nitrogen-limited conditions, whilst carbon-limited conditions suppressed sporulation. The influence of medium phosphate upon sporulation is also reported, with high concentrations exerting an inhibitory effect.     

Effects of pH shifts, bile salts, and glucose on sporulation of Clostridium perfringens NCTC 8798

The sporulation of Clostridium perfringens NCTC 8798 was studied after exposing vegetative cells to: pH values of 1.5 to 8.0 in fluid thioglycolate broth (for 2h) and then transferring them to Duncan-Strong (DS) sporulation medium; sodium cholate or sodium deoxycholate (0.3 to 6.5 mM) in DS medium; or Rhia-Solberg medium with 0.4% (wt/wt) starch, glucose, or both added at 0 to 55 mM. At pH 1.5, no culturable heat-resistant spores were formed. For cells exposed to pH 3.0, 4.0, 5.0, or 6.0, increases in heat-resistant spores were not seen until after a lag of 12 to 13 h, whereas the lag was only 2 to 3 h for cells exposed to pH 7.0 or 8.0. Maximal spore crops were produced after only 6 to 8 h for cells exposed to pH 7 or 8, but 16 to 18 h was required for production of maximal spore crops by cells exposed to the lower-pH media. The addition of sodium cholate (3.5 to 6.5 mM) to DS medium only slightly reduced the culturable heat-resistant spore count from 1.9 X 10(7) to 3 X 10(6)/ml. The addition of 1.8 mM or more sodium deoxycholate reduced the culturable heat-resistant spore count to less than 10/ ml. When either starch or glucose alone was added to Rhia-Solberg medium there was no production of culturable heat-resistant spores, but a combination of 0.4% (wt/wt) starch and 4.4 mM glucose yielded 6 X 10(5) spores/ml. The spore production remained at this level for glucose concentrations of 6 to 22 mM, but then declined to about 3 X 10(3) spores per ml at higher concentrations.     

Effects of pH shifts, bile salts, and glucose on sporulation of Clostridium perfringens NCTC 8798.

The sporulation of Clostridium perfringens NCTC 8798 was studied after exposing vegetative cells to: pH values of 1.5 to 8.0 in fluid thioglycolate broth (for 2h) and then transferring them to Duncan-Strong (DS) sporulation medium; sodium cholate or sodium deoxycholate (0.3 to 6.5 mM) in DS medium; or Rhia-Solberg medium with 0.4% (wt/wt) starch, glucose, or both added at 0 to 55 mM. At pH 1.5, no culturable heat-resistant spores were formed. For cells exposed to pH 3.0, 4.0, 5.0, or 6.0, increases in heat-resistant spores were not seen until after a lag of 12 to 13 h, whereas the lag was only 2 to 3 h for cells exposed to pH 7.0 or 8.0. Maximal spore crops were produced after only 6 to 8 h for cells exposed to pH 7 or 8, but 16 to 18 h was required for production of maximal spore crops by cells exposed to the lower-pH media. The addition of sodium cholate (3.5 to 6.5 mM) to DS medium only slightly reduced the culturable heat-resistant spore count from 1.9 X 10(7) to 3 X 10(6)/ml. The addition of 1.8 mM or more sodium deoxycholate reduced the culturable heat-resistant spore count to less than 10/ ml. When either starch or glucose alone was added to Rhia-Solberg medium there was no production of culturable heat-resistant spores, but a combination of 0.4% (wt/wt) starch and 4.4 mM glucose yielded 6 X 10(5) spores/ml. The spore production remained at this level for glucose concentrations of 6 to 22 mM, but then declined to about 3 X 10(3) spores per ml at higher concentrations.     

Time-Dependent Sporulation, Conidial Size and Germ Tube Formation in Alternaria tenuissima (Kunze ex Pers.) Wiltshire on Different Media

Time-dependent sporulation, conidial size and germ tube formation in Alternaria tenuissima (Kunze ex Pers.) Wiltshire on different media were studied. The results indicate that maximum number of first spore was formed on potato dextrose agar (PDA) and new leaf extract of pigeon pea followed by old leaf extract of pigeon pea and distilled water (DW). The sporulation was relatively poor on other media. The maximum number of spores in a chain were produced on PDA and albumen +0.9% sodium citrate. Only one spore was seen in DW. According to time-dependent sporulation, the media were divided into three categories: on some media the first spore was formed in 18 h, in another group it took 30–36 h and in the third group the first conidium was formed after 40 h. Four germ tubes were commonly formed on most of the media. The largest conidia were observed on potato dextrose and the smallest ones were seen on DW.     

Effect of sporulation conditions on the resistance of Bacillus subtilis spores to heat and high pressure

Bacillus subtilis(B. subtilis) cells were placed in various environmental conditions to study the effects of aeration, water activity of the medium, temperature, pH, and calcium content on spore formation and the resulting properties. Modification of the sporulation conditions lengthened the growth period of B. subtilis and its sporulation. In some cases, it reduced the final spore concentration. The sporulation conditions significantly affected the spore properties, including germination capacity and resistance to heat treatment in water (30 min at 97°C) or to high pressure (60 min at 350 MPa and 40°C). The relationship between the modifications of these spore properties and the change in the spore structure induced by different sporulation conditions is also considered. According to this study, sporulation conditions must be carefully taken into account during settling sterilization processes applied in the food industry.     

Growth, sporulation, and enzyme defects of glucosamine mutants of Bacillus subtilis

Two glucosamine (GCA)-requiring mutants have been isolated which grow on glucose minimal or nutrient sporulation medium only in the presence of either GCA or acetyl-GCA. They lack the l-glutamine-d-fructose-6-phosphate aminotransferase (EC 2.6.1.13), which is repressible by GCA and whose activity in the standard strain decreases after cessation of growth. But the mutants can grow on GCA as sole carbon and ammonia source, because GCA induces the synthesis of 2-amino-2-deoxy-d-glucose-6-phosphate ketol-isomerase (deaminating) (EC 5.3.1.10). With respect to sporulation, the GCA-requiring mutants are in a serious dilemma, as GCA represses the onset of massive sporulation and yet a small amount of GCA-6-phosphate derivatives is necessary to allow sporulation. When GCA is continuously provided in small quantities, sporelike particles are produced which contain little or no spore cortex but a normal spore coat. Apparently, GCA derivatives are needed especially for cortex formation. Many of the sporelike particles can produce colonies after octanol, but not after heat treatment. When they are purified by treatment with lysozyme and sodium dodecylsulfate, they do not show the decrease in optical density at 600 nm typical of germination nor do they produce offspring.     

Emergence and development of resistance to antimicrobial chemicals and heat in spores of Bacillus subtilis

The emergence and development of chemical and thermal resistance in spores of Bacillus subtilis was examined. The chemicals studied were of the disinfectant type: glutaraldehyde, hypochlorite, hypochlorite-methanol and povidone-iodine. Growth and sporulation were followed by electron microscopy and resistance assigned to specific stages in relation to 45Ca and DPA accumulation. A sequential development of resistance was observed with thermal resistance appearing first at early Stage V corresponding to maturation of cortex and deposition of rudimentary spore coat material. Chemical resistance coincided with middle to late Stage V dependent on the chemical concerned. A progressive development of resistance was observed on prolonged incubation in sporulation medium and was affected by inclusion of lysozyme in the spore washing sequence.     

Emergence and development of resistance to antimicrobial chemicals and heat in spores of Bacillus subtilis

The emergence and development of chemical and thermal resistance in spores of Bacillus subtilis was examined. The chemicals studied were of the disinfectant type: glutaraldehyde, hypochlorite, hypochlorite-methanol and povidone-iodine. Growth and sporulation were followed by electron microscopy and resistance assigned to specific stages in relation to ⁴⁵Ca and DPA accumulation. A sequential development of resistance was observed with thermal resistance appearing first at early Stage V corresponding to maturation of cortex and deposition of rudimentary spore coat material. Chemical resistance coincided with middle to late Stage V dependent on the chemical concerned. A progressive development of resistance was observed on prolonged incubation in sporulation medium and was affected by inclusion of lysozyme in the spore washing sequence.     

Spore coat protein of Bacillus subtilis. Structure and precursor synthesis.

The coat protein of Bacillus subtilis spores comprises about 10% of the total dry weight of spores and 25% of the total spore protein. One protein with a molecular weight of 13,000 to 15,000 comprises a major portion of the spore coat. This mature spore coat protein has histidine at its NH2 terminus and is relatively rich in hydrophobic amino acids. Netropsin, and antibiotic which binds to A-T-rich regions of DNA and inhibits sporulation, but not growth, decreased the synthesis of this spore coat protein by 75%. A precursor spore coat protein with a molecular weight of 25,000 is made initially at t1 of sporulation and is converted to the mature spore coat protein with a molecular weight of 13,500 at t2 - t3. These data indicate that the spore coat protein gene is expressed very early in sporulation prior to the modifications of RNA polymerase which have been noted.     

Dielectric monitoring of growth and sporulation of <Emphasis Type="BoldItalic">Bacillus thuringiensis</Emphasis>

On-line permittivity and optical density measurements have been used to monitor biomass concentration and sporulation status during growth of a spore-forming bacterium, Bacillus thuringiensis, in fed-batch culture. The correlation between permittivity, optical density and other observations showed three distinct phases of growth: growth itself, transition and sporulation. The permittivity variations during the transition and sporulation phases could be related to the sporulation development: the evolution pattern of the ratio of optical density to permittivity was representative of the culture state, and during the sporulation phase, a permittivity index could be build to measure the extend of spore liberation.     

Morphological stages of Bacillus subtilis sporulation and resistance to fusidic acid.

During spore development of Bacillus subtilis both protein synthesis and sporulation become resistant to the antibiotic fusidic acid. This resistance develops at the time when asymmetric prespore septa are formed. Simultaneously ribosomes lose their ability to bind fusidic acid, as demonstrated by their affinity chromatography with the immobilized drug. Mutants resistant to fusidic acid during growth are oligosporogenous; their sporulation development is blocked before septum formation. These results indicate that normal ribosomes are needed for prespore septation sporulation; only after septation can protein synthesis be maintained, throughout the development period, by fusidate resistant ribosomes.     

Effect of culture conditions on growth and sporulation ofBacillus thuringiensis subsp.israelensis and development of media for production of the protein crystal endotoxin

Summary The influence of medium composition on the inoculum and production stages of theBacillus thuringiensis subsp.israelensis bioinsecticide fermentation was investigated. Media which inhibited sporulation were selected for inoculum development stages. Bioinsecticide production media were designed to produce high cell counts and >90% sporulation in a 48h fermentation. Maximum insecticidal activity occurred at the point of maximum bacterial cell lysis/spore release. A process involving two inoculum stages and a 48h production stage in a 40 l fermenter yielded a viable cell count of 6.5 x 10⁹/ml with greater than 95% sporulation. Good correlation existed between spore counts and bioinsecticide activity.     

Control of sporulation in the filamentous cyanobacteriumAnabaena torulosa

In the cyanobacteriumAnabaena torulosa, sporulation occurred even during the logarithmic growth phase. Sporulation was initiated by differentiation of the vegetative cell on one side, adjoining the heterocyst followed by differentiation of the vegetative cell on the other side. Subsequently, spores were differentiated alternately on either side to form spore strings. The sequence of sporulation supports the previous notion that a gradient of spore maturation exists in cyanobacteria and also indicates that the gradient is manifested unequally on either side of heterocysts. Sporulation was absent or negligible in a minerally enriched medium but ocurred readily in a minimal medium. The extent of sporulation was inversely related to phosphate concentration. Sporulation was enhanced at higher temperature. Incandescent light, but not fluorescent light, greatly stimulated sporulation suggesting possible involvement of red light in spore differentiation. Addition of filtrate, from 5 to 8 day old cultures, to freshly inoculatedA. torulosa greatly enhanced sporulation indicating the influence of extracellular products in spore formation.     

A method for the determination of bacterial spore DNA content based on isotopic labelling, spore germination and diphenylamine assay; ploidy of spores of several Bacillus species.

A reliable method for measuring the spore DNA content, based on radioactive DNA labelling, spore germination in absence of DNA replication and diphenylamine assay, was developed. The accuracy of the method, within 10-15%, is adequate for determining the number of chromosomes per spore, provided that the genome size is known. B subtilis spores were shown to be invariably monogenomic, while those of larger bacilli Bacillus megaterium, Bacillus cereus and Bacillus thuringiensis, often, if not invariably, contain two genomes. Attempts to modify the spore DNA content of B subtilis by altering the richness of the sporulation medium, the sporulation conditions (liquid or solid medium), or by mutation, were apparently unsuccessful. An increase of spore size with medium richness, not accompanied by an increase in DNA content, was observed. The implication of the apparently species-specific spore ploidy and the influence of the sporulation conditions on spore size and shape are discussed.     

Roles of DacB and spm proteins in clostridium perfringens spore resistance to moist heat, chemicals, and UV radiation

Clostridium perfringens food poisoning is caused mainly by enterotoxigenic type A isolates that typically possess high spore heat resistance. Previous studies have shown that alpha/beta-type small, acid-soluble proteins (SASP) play a major role in the resistance of Bacillus subtilis and C. perfringens spores to moist heat, UV radiation, and some chemicals. Additional major factors in B. subtilis spore resistance are the spore's core water content and cortex peptidoglycan (PG) structure, with the latter properties modulated by the spm and dacB gene products and the sporulation temperature. In the current work, we have shown that the spm and dacB genes are expressed only during C. perfringens sporulation and have examined the effects of spm and dacB mutations and sporulation temperature on spore core water content and spore resistance to moist heat, UV radiation, and a number of chemicals. The results of these analyses indicate that for C. perfringens SM101 (i) core water content and, probably, cortex PG structure have little if any role in spore resistance to UV and formaldehyde, presumably because these spores' DNA is saturated with alpha/beta-type SASP; (ii) spore resistance to moist heat and nitrous acid is determined to a large extent by core water content and, probably, cortex structure; (iii) core water content and cortex PG cross-linking play little or no role in spore resistance to hydrogen peroxide; (iv) spore core water content decreases with higher sporulation temperatures, resulting in spores that are more resistant to moist heat; and (v) factors in addition to SpmAB, DacB, and sporulation temperature play roles in determining spore core water content and thus, spore resistance to moist heat.     

SmeA, a small membrane protein with multiple functions in Streptomyces sporulation including targeting of a SpoIIIE/FtsK-like protein to cell division septa

Sporulation in aerial hyphae of Streptomyces coelicolor involves profound changes in regulation of fundamental morphogenetic and cell cycle processes to convert the filamentous and multinucleoid cells to small unigenomic spores. Here, a novel sporulation locus consisting of smeA (encoding a small putative membrane protein) and sffA (encoding a SpoIIIE/FtsK-family protein) is characterized. Deletion of smeA-sffA gave rise to pleiotropic effects on spore maturation, and influenced the segregation of chromosomes and placement of septa during sporulation. Both smeA and sffA were expressed specifically in apical cells of sporogenic aerial hyphae simultaneously with or slightly after Z-ring assembly. The presence of smeA-like genes in streptomycete chromosomes, plasmids and transposons, often paired with a gene for a SpoIIIE/FtsK- or Tra-like protein, indicates that SmeA and SffA functions might be related to DNA transfer. During spore development SffA accumulated specifically at sporulation septa where it colocalized with FtsK. However, sffA did not show redundancy with ftsK, and SffA function appeared distinct from the DNA translocase activity displayed by FtsK during closure of sporulation septa. The septal localization of SffA was dependent on SmeA, suggesting that SmeA may act as an assembly factor for SffA and possibly other proteins required during spore maturation.     

Synthesis of a spore-specific surface antigen during sporulation of Saccharomyces cerevisiae

Antisera raised against purified yeast ascospores caused agglutination of both ascospores and vegetative cells. A spore-specific activity was obtained by absorbing out anti-vegetative activity with vegetative cells. The anti-vegetative cell activity was directed against mannan, and was probably due to exposure of some spore coat mannan at the spore surface since concanavalin A and lentil lectin also caused agglutination of ascospores. The spore-specific activity was probably determined by a protein or proteins, since extraction of spores with a mixture of sodium dodecyl sulphate and dithiothreitol markedly affected their agglutination by the spore-specific serum. The spore-specific antigen was synthesized in a soluble form during sporulation several hours before the appearance of the spore surface and the pool of soluble antigen declined as the spore was assembled. Synthesis of the soluble antigen was inhibited by adding cycloheximide at all times up to its first appearance in the sporulating cell.