Rational Architecture Design Enables Superior Na Storage in Greener NASICON‐Na4MnV(PO4)3 Cathode

Na₃V₂(PO₄)₃ has attracted great attention due to its high energy density and stable structure. However, in order to boost its application, the discharge potential of 3.3–3.4 V (vs Na⁺/Na) still needs to be improved and substitution of vanadium with other lower cost and earth‐abundant active redox elements is imperative. Therefore, the Na superionic conductor (NASICON)‐structured Na₄MnV(PO₄)₃ seems to be more attractive due to its lower toxicity and higher voltage platform resulting from the partial substitution of V with Mn. However, Na₄MnV(PO₄)₃ still suffers from poor electronic conductivity, leading to unsatisfactory capacity delivering and poor high‐rate capability. In this work, a graphene aerogel–supported in situ carbon–coated Na₄MnV(PO₄)₃ material is synthesized through a feasible solution‐route method. The elaborately designed Na₄MnV(PO₄)₃ can reach ≈380 Wh kg^?1 at 0.5 C (1 C = 110 mAh g^?1) and realize superior high‐rate capability evenat 50 C (60.1 mAh g^?1) with a long cycle‐life of 4000 cycles at 20 C. This impressive progress should be ascribed to the multifunctional 3D carbon framework and the distinctive structure of trigonal Na₄MnV(PO₄)₃, which are deeply investigated by both experiments and calculations.     

Na3V2(PO4)3 as the Sole Solid Energy Storage Material for Redox Flow Sodium‐Ion Battery

Redox flow batteries have considerable advantages of system scalability and operation flexibility over other battery technologies, which makes them promising for large‐scale energy storage application. However, they suffer from low energy density and consequently relatively high cost for a nominal energy output. Redox targeting–based flow batteries are employed by incorporating solid energy storage materials in the tank and present energy density far beyond the solubility limit of the electrolytes. The success of this concept relies on paring suitable redox mediators with solid materials for facilitated reaction kinetics and lean electrolyte composition. Here, a redox targeting‐based flow battery system using the NASICON‐type Na₃V₂(PO₄)₃ as a capacity booster for both the catholyte and anolyte is reported. With 10‐methylphenothiazine as the cathodic redox mediator and 9‐fluorenone as anodic redox mediator, an all‐organic single molecule redox targeting–based flow battery is developed. The anodic and cathodic capacity are 3 and 17 times higher than the solubility limit of respective electrolyte, with which a full cell can achieve an energy density up to 88 Wh L^?1. The reaction mechanism is scrutinized by operando and in‐situ X‐ray and UV–vis absorption spectroscopy. The reaction kinetics are analysed in terms of Butler–Volmer formalism.     

Layer‐by‐Layer Na3V2(PO4)3 Embedded in Reduced Graphene Oxide as Superior Rate and Ultralong‐Life Sodium‐Ion Battery Cathode

Na₃V₂(PO₄)₃ (NVP) is regarded as a promising cathode for advanced sodium‐ion batteries (SIBs) due to its high theoretical capacity and stable sodium (Na) super ion conductor (NASICON) structure. However, strongly impeded by its low electronic conductivity, the general NVP delivers undesirable rate capacity and fails to meet the demands for quick charge. Herein, a novel and facile synthesis of layer‐by‐layer NVP@reduced graphene oxide (rGO) nanocomposite is presented through modifying the surface charge of NVP gel precursor. The well‐designed layered NVP@rGO with confined NVP nanocrystal in between rGO layers offers high electronic and ionic conductivity as well as stable structure. The NVP@rGO nanocomposite with merely ≈3.0 wt% rGO and 0.5 wt% amorphous carbon, yet exhibits extraordinary electrochemical performance: a high capacity (118 mA h g^?1 at 0.5 C attaining the theoretical value), a superior rate capability (73 mA h g^?1 at 100 C and even up to 41 mA h g^?1 at 200 C), ultralong cyclability (70.0% capacity retention after 15 000 cycles at 50 C), and stable cycling performance and excellent rate capability at both low and high operating temperatures. The proposed method and designed layer‐by‐layer active nanocrystal@rGO strategy provide a new avenue to create nanostructures for advanced energy storage applications.     

A High‐Power Na3V2(PO4)3‐Bi Sodium‐Ion Full Battery in a Wide Temperature Range

Sodium‐ion batteries (SIBs) that operate in a wide temperature range are in high demand for practical large‐scale electric energy storage. Herein, a novel full SIB is composed of a bulk Bi anode, a Na₃V₂(PO₄)₃/carbon nanotubes composite (NVP‐CNTs) cathode and a NaPF₆‐diglyme electrolyte. The Bi anode gradually evolves into a porous network in the ether‐based electrolyte during initial cycles, and in the NVP‐CNTs cathode the NVP is cross linked by CNTs to show large exchange current density. These unique features merit the full SIB of Bi//NVP‐CNTs with high Na⁺ diffusion coefficient and low reaction activation energy, and hence fast Na⁺ transport and facile redox reaction kinetics. The resultant full SIB presents high power density of 2354.6 W kg^?1 and energy density of 150 Wh kg^?1 and superior cycling stability in a wide temperature range from ?15 to 45 °C. This will shed light on battery design, and promote their development for practical applications in various weather conditions.     

Nanoconfined Carbon‐Coated Na3V2(PO4)3 Particles in Mesoporous Carbon Enabling Ultralong Cycle Life for Sodium‐Ion Batteries

Na₃V₂(PO₄)₃ (denoted as NVP) has been considered as a promising cathode material for room temperature sodium ion batteries. Nevertheless, NVP suffers from poor rate capability resulting from the low electronic conductivity. Here, the feasibility to approach high rate capability by designing carbon‐coated NVP nanoparticles confined into highly ordered mesoporous carbon CMK‐3 matrix (NVP@C@CMK‐3) is reported. The NVP@C@CMK‐3 is prepared by a simple nanocasting technique. The electrode exhibits superior rate capability and ultralong cyclability (78 mA h g^?1 at 5 C after 2000 cycles) compared to carbon‐coated NVP and pure NVP cathode. The improved electrochemical performance is attributed to double carbon coating design that combines a variety of advantages: very short diffusion length of Na⁺/e^? in NVP, easy access of electrolyte, and short transport path of Na⁺ through carbon toward the NVP nanoparticle, high conductivity transport of electrons through the 3D interconnected channels of carbon host. The optimum design of the core–shell nanostructures with double carbon coating permits fast kinetics for both transported Na⁺ ions and electrons, enabling high‐power performance.     

Sodium Storage and Transport Properties in Layered Na2Ti3O7 for Room‐Temperature Sodium‐Ion Batteries

Layered sodium titanium oxide, Na₂Ti₃O₇, is synthesized by a solid‐state reaction method as a potential anode for sodium‐ion batteries. Through optimization of the electrolyte and binder, the microsized Na₂Ti₃O₇ electrode delivers a reversible capacity of 188 mA h g^?1 in 1 M NaFSI/PC electrolyte at a current rate of 0.1C in a voltage range of 0.0–3.0 V, with sodium alginate as binder. The average Na storage voltage plateau is found at ca. 0.3 V vs. Na⁺/Na, in good agreement with a first‐principles prediction of 0.35 V. The Na storage properties in Na₂Ti₃O₇ are investigated from thermodynamic and kinetic aspects. By reducing particle size, the nanosized Na₂Ti₃O₇ exhibits much higher capacity, but still with unsatisfied cyclic properties. The solid‐state interphase layer on Na₂Ti₃O₇ electrode is analyzed. A zero‐current overpotential related to thermodynamic factors is observed for both nano‐ and microsized Na₂Ti₃O₇. The electronic structure, Na⁺ ion transport and conductivity are investigated by the combination of first‐principles calculation and electrochemical characterizations. On the basis of the vacancy‐hopping mechanism, a quasi‐3D energy favorable trajectory is proposed for Na₂Ti₃O₇. The Na⁺ ions diffuse between the TiO₆ octahedron layers with pretty low activation energy of 0.186 eV.     

Highly Reversible Na Storage in Na3V2(PO4)3 by Optimizing Nanostructure and Rational Surface Engineering

Sodium‐ion batteries (NIBs) have attracted more and more attention as economic alternatives for lithium‐ion batteries (LIBs). Sodium super ionic conductor (NASICON) structure materials, known for high conductivity and chemical diffusion coefficient of Na⁺ (≈10^?14 cm² s^?1), are promising electrode materials for NIBs. However, NASICON structure materials often suffer from low electrical conductivity (<10^?4 S cm^?1), which hinders their electrochemical performance. Here high performance sodium storage performance in Na₃V₂(PO₄)₃ (NVP) is realized by optimizing nanostructure and rational surface engineering. A N, B codoped carbon coated three‐dimensional (3D) flower‐like Na₃V₂(PO₄)₃ composite (NVP@C‐BN) is designed to enable fast ions/electrons transport, high‐surface controlled energy storage, long‐term structural integrity, and high‐rate cycling. The conductive 3D interconnected porous structure of NVP@C‐BN greatly releases mechanical stress from Na⁺ extraction/insertion. In addition, extrinsic defects and active sites introduced by the codoping heteroatoms (N, B) both enhance Na⁺ and e^? diffusion. The NVP@C‐BN displays excellent electrochemical performance as the cathode, delivering reversible capacity of 70% theoretical capacity at 100 C after 2000 cycles. When used as anode, the NVP@C‐BN also shows super long cycle life (38 mA h g^?1 at 20 C after 5000 cycles). The design provides a novel approach to open up possibilities for designing high‐power NIBs.     

Novel K3V2(PO4)3/C Bundled Nanowires as Superior Sodium‐Ion Battery Electrode with Ultrahigh Cycling Stability

Sodium‐ion battery has captured much attention due to the abundant sodium resources and potentially low cost. However, it suffers from poor cycling stability and low diffusion coefficient, which seriously limit its widespread application. Here, K₃V₂(PO₄)₃/C bundled nanowires are fabricated usinga facile organic acid‐assisted method. With a highly stable framework, nanoporous structure, and conductive carbon coating, the K₃V₂(PO₄)₃/C bundled nanowires manifest excellent electrochemical performances in sodium‐ion battery. A stable capacity of 119 mAh g^?1 can be achieved at 100 mA g^?1. Even at a high current density of 2000 mA g^?1, 96.0% of the capacity can be retained after 2000 charge–discharge cycles. Comparing with K₃V₂(PO₄)₃/C blocks, the K₃V₂(PO₄)₃/C bundled nanowires show significantly improved cycling stability. This work provides a facile and effective approach to enhance the electrochemical performance of sodium‐ion batteries.     

Realizing Three‐Electron Redox Reactions in NASICON‐Structured Na3MnTi(PO4)3 for Sodium‐Ion Batteries

Developing multielectron reaction electrode materials is essential for achieving high specific capacity and high energy density in secondary batteries; however, it remains a great challenge. Herein, Na₃MnTi(PO₄)₃/C hollow microspheres with an open and stable NASICON framework are synthesized by a spray‐drying‐assisted process. When applied as a cathode material for sodium‐ion batteries, the resultant Na₃MnTi(PO₄)₃/C microspheres demonstrate fully reversible three‐electron redox reactions, corresponding to the Ti^3+/4+ (≈2.1 V), Mn^2+/3+ (≈3.5 V), and Mn^3+/4+ (≈4.0 V vs Na⁺/Na) redox couples. In situ X‐ray diffraction results reveals that both solid‐solution and two‐phase electrochemical reactions are involved in the sodiation/desodiation processes. The high specific capacity (160 mAh g^?1 at 0.2 C), outstanding cyclability (≈92% capacity retention after 500 cycles at 2 C), and the facile synthesis make the Na₃MnTi(PO₄)₃/C a prospective cathode material for sodium‐ion batteries.     

The First Report on Excellent Cycling Stability and Superior Rate Capability of Na3V2(PO4)3 for Sodium Ion Batteries

Sodium ion batteries are attractive for the rapidly emerging large‐scale energy storage market for intermittent renewable resources. Currently a viable cathode material does not exist for practical non‐aqueous sodium ion battery applications. Here we disclose a high performance, durable electrode material based on the 3D NASICON framework. Porous Na₃V₂(PO₄)₃/C was synthesized using a novel solution‐based approach. This material, as a cathode, is capable of delivering an energy storage capacity of ～400 mWh/g vs. sodium metal. Furthermore, at high current rates (10, 20 and 40 C), it displayed remarkable capacity retention. Equally impressive is the long term cycle life. Nearly 50% of the initial capacity was retained after 30,000 charge/discharge cycles at 40 C (4.7 A/g). Notably, coulombic efficiency was 99.68% (average) over the course of cycling. To the best of our knowledge, the combination of high energy density, high power density and ultra long cycle life demonstrated here has never been reported before for sodium ion batteries. We believe our findings will have profound implications for developing large‐scale energy storage systems for renewable energy sources.     

A Practicable Li/Na‐Ion Hybrid Full Battery Assembled by a High‐Voltage Cathode and Commercial Graphite Anode: Superior Energy Storage Performance and Working Mechanism

With the rapidly growing demand for low‐cost and safe energy storage, the advanced battery concepts have triggered strong interests beyond the state‐of‐the‐art Li‐ion batteries (LIBs). Herein, a novel hybrid Li/Na‐ion full battery (HLNIB) composed of the high‐energy and lithium‐free Na₃V₂(PO₄)₂O₂F (NVPOF) cathode and commercial graphite anode mesophase carbon micro beads is for the first time designed. The assembled HLNIBs exhibit two high working voltage at about 4.05 and 3.69 V with a specific capacity of 112.7 mA h g^?1. Its energy density can reach up to 328 W h kg^?1 calculated from the total mass of both cathode and anode materials. Moreover, the HLNIBs show outstanding high‐rate capability, long‐term cycle life, and excellent low‐temperature performance. In addition, the reaction kinetics and Li/Na‐insertion/extraction mechanism into/out NVPOF is preliminarily investigated by the galvanostatic intermittent titration technique and ex situ X‐ray diffraction. This work provides a new and profound direction to develop advanced hybrid batteries.     

Chemical Synthesis of 3D Graphene‐Like Cages for Sodium‐Ion Batteries Applications

Sodium (Na) super ion conductor structured Na₃V₂(PO₄)₃ (NVP) is extensively explored as cathode material for sodium‐ion batteries (SIBs) due to its large interstitial channels for Na⁺ migration. The synthesis of 3D graphene‐like structure coated on NVP nanoflakes arrays via a one‐pot, solid‐state reaction in molten hydrocarbon is reported. The NVP nanoflakes are uniformly coated by the in situ generated 3D graphene‐like layers with the thickness of 3 nm. As a cathode material, graphene covered NVP nanoflakes exhibit excellent electrochemical performances, including close to theoretical reversible capacity (115.2 mA h g^?1 at 1 C), superior rate capability (75.9 mA h g^?1 at 200 C), and excellent cyclic stability (62.5% of capacity retention over 30000 cycles at 50 C). Furthermore, the 3D graphene‐like cages after removing NVP also serve as a good anode material and deliver a specific capacity of 242.5 mA h g^?1 at 0.1 A g^?1. The full SIB using these two cathode and anode materials delivers a high specific capacity (109.2 mA h g^?1 at 0.1 A g^?1) and good cycling stability (77.1% capacity retention over 200 cycles at 0.1 A g^?1).     

Electrochemical and Structural Investigation of Calcium Substituted Monoclinic Li3V2(PO4)3 Anode Materials for Li‐Ion Batteries

In this work, the effect of Li⁺ substitution in Li₃V₂(PO₄)₃ with a large divalent ion (Ca²⁺) toward lithium insertion is studied. A series of materials, with formula Li_3?2xCa_xV₂(PO₄)₃/C (x = 0, 0.5, 1, and 1.5) is synthesized and studied in the potential region 3–0.01 V versus Li⁺/Li. Synchrotron diffraction demonstrates that Li₃V₂(PO₄)₃/C has a monoclinic structure (space group P2₁/n), while Ca_1.5V₂(PO₄)₃/C possesses a rhombohedral structure (space group R‐3c). The intermediate compounds, Li₂Ca_0.5V₂(PO₄)₃/C and LiCaV₂(PO₄)₃/C, are composed of two main phases, including monoclinic Li₃V₂(PO₄)₃/C and rhombohedral Ca_1.5V₂(PO₄)₃/C. Cyclic voltammetry reveals five reduction and oxidation peaks on Li₃V₂(PO₄)₃/C and Li₂Ca_0.5V₂(PO₄)₃/C electrodes. In contrast, LiCaV₂(PO₄)₃/C and Ca_1.5V₂(PO₄)₃/C have no obvious oxidation and reduction peaks but a box‐type voltammogram. This feature is the signature for capacitive‐like mechanism, which involves fast electron transfer on the surface of the electrode. Li₃V₂(PO₄)₃/C undergoes two solid‐solution and a short two‐phase reaction during lithiation and delithiation processes, whereas Ca_1.5V₂(PO₄)₃/C only goes through capacitive‐like mechanism. In operando X‐ray absorption spectroscopy confirms that, in both Li₃V₂(PO₄)₃/C and Ca_1.5V₂(PO₄)₃/C, V ions are reduced during the insertion of the first three Li ions. This study demonstrates that the electrochemical characteristic of polyanionic phosphates can be easily tuned by replacing Li⁺ with larger divalent cations.     

An Ultralong Lifespan and Low‐Temperature Workable Sodium‐Ion Full Battery for Stationary Energy Storage

Presently, commercialization of sodium‐ion batteries (SIBs) is still hindered by the relatively poor energy‐storage performance. In addition, low‐temperature (low‐T) Na storage is another principal concern for the wide application of SIBs. Unfortunately, the Na‐transfer kinetics is extremely sluggish at low‐T, as a result, there are few reports on low‐T SIBs. Here, an advanced low‐T sodium‐ion full battery (SIFB) assembled by an anode of 3D Se/graphene composite and a high‐voltage cathode (Na₃V₂(PO₄)₂O₂F) is developed, exhibiting ultralong lifespan (over even 15 000 cycles, the capacity retention is still up to 86.3% at 1 A g^?1), outstanding low‐T energy storage performance (e.g., all values of capacity retention are >75% after 1000 cycles at temperatures from 25 to ?25 °C at 0.4 A g^?1), and high‐energy/power properties. Such ultralong lifespan signifies that the developed sodium‐ion full battery can be used for longer than 60 years, if batteries charge/discharge once a day and 80% capacity retention is the standard of battery life. As a result, the present study not only promotes the practicability and commercialization of SIBs but also points out the new developing directions of next‐generation energy storage for wider range applications.     

KTi2(PO4)3 with Large Ion Diffusion Channel for High‐Efficiency Sodium Storage

To accommodate the decreasing lithium resource and ensure continuous development of energy storage industry, sodium‐based batteries are widely studied to inherit the next generation of energy storage devices. In this work, a novel Na super ionic conductor type KTi₂(PO₄)₃/carbon nanocomposite is designed and fabricated as sodium storage electrode materials, which exhibits considerable reversible capacity (104 mAh g^?1 under the rate of 1 C with flat voltage plateaus at ≈2.1 V), high‐rate cycling stability (74.2% capacity retention after 5000 cycles at 20 C), and ultrahigh rate capability (76 mAh g^?1 at 100 C) in sodium ion batteries. Besides, the maximum ability for sodium storage is deeply excavated by further investigations about different voltage windows in half and full sodium ion cells. Meanwhile, as cathode material in sodium‐magnesium hybrid batteries, the KTi₂(PO₄)₃/carbon nanocomposite also displays good electrochemical performances (63 mAh g^?1 at the 230th cycle under the voltage window of 1.0–1.9 V). The results demonstrate that the KTi₂(PO₄)₃/carbon nanocomposite is a promising electrode material for sodium ion storage, and lay theoretical foundations for the development of new type of batteries.