Na4‐αM2+α/2(P2O7)2 (2/3 ≤ α ≤ 7/8, M = Fe,Fe0.5Mn0.5, Mn): A Promising Sodium Ion Cathode for Na‐ion Batteries

A new polyanion‐based compound, Na_3.12M_2.44(P₂O₇)₂ (M = Fe, Fe_0.5Mn_0.5, Mn) is synthesized and examined as a cathode for Na ion batteries. Off‐stoichiometric synthesis induces the formation of a Na‐rich phase, Na_3.32Fe_2.34(P₂O₇)₂ ‐ a member of the solid solution series Na_4‐αFe_2+α/2(P₂O₇)₂ (2/3 ≤ α ≤ 7/8) ‐ which delivers a reversible capacity of about 85 mA h g^?1 at ca. 3 V vs. Na/Na⁺ and exhibits very stable cycle performance. Above all, it shows fast kinetics for Na ions, delivering an almost constant 72% reversible capacity at rates between C/10 and 10C without the necessity for nanosizing or carbon coating. We attribute this to the spacious channel size along the a‐axis, along with a single phase transformation upon de/sodiation.     

3D Hierarchical Porous α‐Fe2O3 Nanosheets for High‐Performance Lithium‐Ion Batteries

To develop a long cycle life and good rate capability electrode, 3D hierarchical porous α‐Fe₂O₃ nanosheets are fabricated on copper foil and directly used as binder‐free anode for lithium‐ion batteries. This electrode exhibits a high reversible capacity and excellent rate capability. A reversible capacity up to 877.7 mAh g^?1 is maintained at 2 C (2.01 A g^?1) after 1000 cycles, and even when the current is increased to 20 C (20.1 A g^?1), a capacity of 433 mA h g^?1 is retained. The unique porous 3D hierarchical nanostructure improves electronic–ionic transport, mitigates the internal mechanical stress induced by the volume variations of the electrode upon cycling, and forms a 3D conductive network during cycling. No addition of any electrochemically inactive conductive agents or polymer binders is required. Therefore, binder‐free electrodes further avoid the uneven distribution of conductive carbon on the current collector due to physical mixing and the addition of an insulator (binder), which has benefits leading to outstanding electrochemical performance.     

Molecular determinants of desensitization and assembly of the chimeric GABAA receptor subunits (α1/γ2) and (γ2/α1) in combinations with β2 and γ2

Two γ-aminobutyric acid_A (GABA_A) receptor chimeras were designed in order to elucidate the structural requirements for GABA_A receptor desensitization and assembly. The (α1/γ2) and (γ2/α1) chimeric subunits representing the extracellular N-terminal domain of α1 or γ2 and the remainder of the γ2 or α1 subunits, respectively, were expressed with β2 and β2γ2 in Spodoptera frugiperda (Sf-9) cells using the baculovirus expression system. The (α1/γ2)β2 and (α1/γ2)β2γ2 but not the (γ2/α1)β2 and (γ2/α1)β2γ2 subunit combinations formed functional receptor complexes as shown by whole-cell patch–clamp recordings and [³H]muscimol and [³H]flunitrazepam binding. Moreover, the surface immunofluorescence staining of Sf-9 cells expressing the (α1/γ2)-containing receptors was pronounced, as opposed to the staining of the (γ2/α1)-containing receptors, which was only slightly higher than background. To explain this, the (α1/γ2) and (γ2/α1) chimeras may act like α1 and γ2 subunits, respectively, indicating that the extracellular N-terminal segment is important for assembly. However, the (α1/γ2) chimeric subunit had characteristics different from the α1 subunit, since the (α1/γ2) chimera gave rise to no desensitization after GABA stimulation in whole-cell patch–clamp recordings, which was independent of whether the chimera was expressed in combination with β2 or β2γ2. Surprisingly, the (α1/γ2)(γ2/α1)β2 subunit combination did desensitize, indicating that the C-terminal segment of the α1 subunit may be important for desensitization. Moreover, desensitization was observed for the (α1/γ2)β2γ2 receptor with respect to the direct activation by pentobarbital. This suggests differences in the mechanism of channel activation for pentobarbital and GABA.     

HLA‐DQ7 β1 and β2 derived peptides as immunomodulators

Modulation of protein–protein interactions involved in the immune system by using small molecular mimics of the contact interfaces may lead to the blockage of the autoimmune response and the development of drugs for immunotherapy. The nonpolymorphic β‐regions, exposed to the microenvironment, of the modeled HLA‐DQ7, which is genetically linked to autoimmune diseases, were determined. Peptides 132–141 and 58–67, located at the β₁ and β₂ domains of HLA‐DQ7, respectively, were tested for their involvement in the interactions with CD4⁺ T lymphocytes. Linear, cyclic, and dimeric analogs that mimic the exposed surfaces of HLA‐DQ7 were designed and synthesized. Their immunosuppressory activities, found in the secondary, humoral immune response to sheep erythrocytes (SRBC) in mice in vitro, ranged from 11% to 53%. The significance of the total charge of the peptides, the pattern of the hydrogen bonding, and the presence of secondary structure were investigated in relation to the immunomodulatory effect of the peptides. Two dimeric analogs of the HLA‐DQ7 58–67 fragment, consisting of the two monomers covalently linked by a polyethylene glycol (PEG) spacer, able to mimic the superdimers, were also synthesized and studied. As the 58–67 segment is located at the β₁ region of HLA‐DQ7, close to the major histocompatibility complex (MHC) groove, one may assume that the 58–67 peptide could accommodate the association between T‐cell receptor (TCR) and human leukocyte antigen (HLA) by activating a co‐stimulatory molecule of the TCR/HLA interaction. This hypothesis is supported by the confocal laser image of the fluorescein‐labeled 58–67 peptide and by the fact that it is an immunostimulator at low concentration. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Human α‐amino‐β‐carboxymuconate‐ε‐semialdehyde decarboxylase (ACMSD): A structural and mechanistic unveiling

Human α‐amino‐β‐carboxymuconate‐ε‐semialdehyde decarboxylase determines the fate of tryptophan metabolites in the kynurenine pathway by controlling the quinolinate levels for de novo nicotinamide adenine dinucleotide biosynthesis. The unstable nature of its substrate has made gaining insight into its reaction mechanism difficult. Our electron paramagnetic resonance (EPR) spectroscopic study on the Cu‐substituted human enzyme suggests that the native substrate does not directly ligate to the metal ion. Substrate binding did not result in a change of either the hyperfine structure or the super‐hyperfine structure of the EPR spectrum. We also determined the crystal structure of the human enzyme in its native catalytically active state (at 1.99 Å resolution), a substrate analogue‐bound form (2.50 Å resolution), and a selected active site mutant form with one of the putative substrate binding residues altered (2.32 Å resolution). These structures illustrate that each asymmetric unit contains three pairs of dimers. Consistent with the EPR findings, the ligand‐bound complex structure shows that the substrate analogue does not directly coordinate to the metal ion but is bound to the active site by two arginine residues through noncovalent interactions. Proteins 2015; 83:178–187. © 2014 Wiley Periodicals, Inc.     

Chelated alkyl halide manganese complexes (η:η-C5H4CH2CH2X)Mn(CO)2 from photolysis of (η-C5H4CH2CH2X)Mn(CO)3

Manganese tricarbonyl complexes (η⁵-C₅H₄CH₂CH₂Br)Mn(CO)₃ (3) and (η⁵-C₅H₄CH₂CH₂I)Mn(CO)₃ (4), with an alkyl halide side chain attached to the cyclopentadienyl ligand, were synthesized as possible precursors to chelated alkyl halide manganese complexes. Photolysis of 3 or 4 in toluene, hexane or acetone-d₆ resulted in CO dissociation and intramolecular coordination of the alkyl halide to manganese to produce (η⁵:η¹-C₅H₄CH₂CH₂Br)Mn(CO)₂ (5) and (η⁵:η¹-C₅H₄CH₂CH₂I)Mn(CO)₂ (6). Low temperature NMR and IR spectroscopy established the structures of 5 and 6. Photolysis of 3 in a glass matrix at 91 K demonstrated CO release from manganese. Low temperature NMR spectroscopy established that the coordinated alkyl halide complexes are stable to approximately −20°C.     

A simple method for preparation of valency hybrid hemoglobins, (αβ)2 and (αβ)2

The improved methods for the preparation of valency hybrid hemoglobins, (α³⁺β²⁺)₂ and (α²⁺β³⁺)₂ were presented. The (α³⁺β²⁺)₂ valency hybrid was separated from the solutions of partially reduced methemoglobin with ascorbic acid, by using CM 32 column chromatography. The (α²⁺β³⁺)₂ valency hybrid was also isolated from hemoglobin solutions, which were partially oxidized with ferricyanide, by chromatography on CM 32 column. These valency hybrid hemoglobins were found to be single on isoelectric focusing electrophoresis. Present procedures are very simple and are suitable for the bulk preparation of (α³⁺β²⁺)₂ and (α²⁺β³⁺)₂ valency hybrids.     

Differential physiologic responses of α7 nicotinic acetylcholine receptors to β‐amyloid1–40 and β‐amyloid1–42

The β‐amyloid peptides (Aβ), Aβ_1–40 and Aβ_1–42, have been implicated in Alzheimer's disease (AD) pathology. Although Aβ_1–42 is generally considered to be the pathological peptide in AD, both Aβ_1–40 and Aβ_1–42 have been used in a variety of experimental models without discrimination. Here we show that monomeric or oligomeric forms of the two Aβ peptides, when interact with the neuronal cation channel, α7 nicotinic acetylcholine receptors (α7nAChR), would result in distinct physiologic responses as measured by acetylcholine release and calcium influx experiments. While Aβ_1–42 effectively attenuated these α7nAChR‐dependent physiology to an extent that was apparently irreversible, Aβ_1–40 showed a lower inhibitory activity that could be restored upon washings with physiologic buffers or treatment with α7nAChR antagonists. Our data suggest a clear pharmacological distinction between Aβ_1–40 and Aβ_1–42. © 2003 Wiley Periodicals, Inc. J Neurobiol 55: 25–30, 2003     

Highly Reversible Oxygen‐Redox Chemistry at 4.1 V in Na4/7−x[□1/7Mn6/7]O2 (□: Mn Vacancy)

Increasing the energy density of rechargeable batteries is of paramount importance toward achieving a sustainable society. The present limitation of the energy density is owing to the small capacity of cathode materials, in which the (de)intercalation of ions is charge‐compensated by transition‐metal redox reactions. Although additional oxygen‐redox reactions of oxide cathodes have been recognized as an effective way to overcome this capacity limit, irreversible structural changes that occur during charge/discharge cause voltage drops and cycle degradation. Here, a highly reversible oxygen‐redox capacity of Na₂Mn₃O₇ that possesses inherent Mn vacancies in a layered structure is found. The cross validation of theoretical predictions and experimental observations demonstrates that the nonbonding 2p orbitals of oxygens neighboring the Mn vacancies contribute to the oxygen‐redox capacity without making the Mn?O bond labile, highlighting the critical role of transition‐metal vacancies for the design of reversible oxygen‐redox cathodes.     

Recent Advances of Mn‐Rich LiFe1‐yMnyPO4 (0.5 ≤ y < 1.0) Cathode Materials for High Energy Density Lithium Ion Batteries

LiMnPO₄ (LMP) is one of the most potential candidates for high energy density (≈700 W h kg^?1) lithium ion batteries (LIBs). However, the intrinsically low electronic conductivity and lithium ion diffusion coefficient of LMP result in its low performance. To overcome these challenges, it is an effective approach to prepare nanometer‐sized Fe‐doping LMP (LFMP) materials through optimization of the preparation routes. Moreover, surface coating can improve the ionic and electronic conductivity, and decrease the interfacial side reactions between the nanometer particles and electrolyte. Thus, a uniform surface coating will lead to a significant enhancement of the electrochemical performance of LFMP. Currently, considerable efforts have been devoted to improving the electrochemical performance of LiFe_1‐y Mn_y PO₄ (0.5 ≤ y < 1.0) and some important progresses have been achieved. Here, a general overview of the structural features, typical electrochemical behavior, delithiation/lithiation mechanisms, and thermodynamic properties of LiFe_1‐y Mn_y PO₄‐based materials is presented. The recent developments achieved in improvement of the electrochemical performances of LiFe_1‐y Mn_y PO₄‐based materials are summarized, including selecting the synthetic methods, nanostructuring, surface coating, optimizing Fe/Mn ratios and particle morphologies, cation/anion doping, and rational designing of LFMP‐based full cells. Finally, the critical issues at present and future development of LiFe_1‐y Mn_y PO₄‐based materials are discussed.     

3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries

A simple and template‐free method for preparing three‐dimensional (3D) porous γ‐Fe₂O₃@C nanocomposite is reported using an aerosol spray pyrolysis technology. The nanocomposite contains inner‐connected nanochannels and γ‐Fe₂O₃ nanoparticles (5 nm) uniformly embedded in a porous carbon matrix. The size of γ‐Fe₂O₃ nanograins and carbon content can be controlled by the concentration of the precursor solution. The unique structure of the 3D porous γ‐Fe₂O₃@C nanocomposite offers a synergistic effect to alleviate stress, accommodate large volume change, prevent nanoparticles aggregation, and facilitate the transfer of electrons and electrolyte during prolonged cycling. Consequently, the nanocomposite shows high‐rate capability and long‐term cyclability when applied as an anode material for Na‐ion batteries (SIBs). Due to the simple one‐pot synthesis technique and high electrochemical performance, 3D porous γ‐Fe₂O₃@C nanocomposites have a great potential as anode materials for rechargeable SIBs.     

5α‐Androst‐16‐en‐3α‐ol β‐D‐Glucuronide,Precursor of 5α‐Androst‐16‐en‐3α‐ol in Human Sweat

5α‐Androst‐16‐en‐3α‐ol (α‐androstenol) is an important contributor to human axilla sweat odor. It is assumed that α‐andostenol is excreted from the apocrine glands via a H₂O‐soluble conjugate, and this precursor was formally characterized in this study for the first time in human sweat. The possible H₂O‐soluble precursors, sulfate and glucuronide derivatives, were synthesized as analytical standards, i.e., α‐androstenol, β‐androstenol sulfates, 5α‐androsta‐5,16‐dien‐3β‐ol (β‐androstadienol) sulfate, α‐androstenol β‐glucuronide, α‐androstenol α‐glucuronide, β‐androstadienol β‐glucuronide, and α‐androstenol β‐glucuronide furanose. The occurrence of α‐androstenol β‐glucuronide was established by ultra performance liquid chromatography (UPLC)/MS (heated electrospray ionization (HESI)) in negative‐ion mode in pooled human sweat, containing eccrine and apocrine secretions and collected from 25 female and 24 male underarms. Its concentration was of 79 ng/ml in female secretions and 241 ng/ml in male secretions. The release of α‐androstenol was observed after incubation of the sterile human sweat or α‐androstenol β‐glucuronide with a commercial glucuronidase enzyme, the urine‐isolated bacteria Streptococcus agalactiae, and the skin bacteria Staphylococcus warneri DSM 20316, Staphylococcus haemolyticus DSM 20263, and Propionibacterium acnes ATCC 6919, reported to have β‐glucuronidase activities. We demonstrated that if α‐ and β‐androstenols and androstadienol sulfates were present in human sweat, their concentrations would be too low to be considered as potential precursors of malodors; therefore, the H₂O‐soluble precursor of α‐androstenol in apocrine secretion should be a β‐glucuronide.     

A novel red‐emitting phosphor,KAl1‐xPO4Cl:Eux3+ (0.1 ≤ x ≤ 1.0)

A series of phosphors KAl_1‐xPO₄Cl:Eu_x³⁺ (0.1 ≤ x ≤ 1.0) was synthesized using a facile combustion method using urea as a fuel and their structural, morphological and photoluminescence properties were investigated. It was found that the particle size was in the range of 1–2 µm with an irregular shape. The f–f transitions of Eu³⁺ in the host lattice were assigned and discussed. The excitation and emission spectra indicated that this phosphor can be efficiently excited by ultraviolet (395 nm), and exhibit reddish orange emission corresponding to the ⁵D₀→⁷F_J (J = 0, 1, 2) transitions of Eu³⁺. The impact of the Eu³⁺ concentration on the relative emission intensity was investigated, and the best doping concentration is 0.5. The present study suggests that the KAl_0.5PO₄Cl: Eu_0.5³⁺ phosphor is a strong candidate as a red component for phosphor‐ converted white light‐emitting diodes (LEDs). Copyright © 2015 John Wiley & Sons, Ltd.