Oxidation of ethylene by cotyledon extracts from Vicia faba L.

Improved rates of ethylene oxidation by cell-free preparations from cotyledons of Vicia faba L. have been obtained using cryogenic storage techniques and by developing a method for the hydrolysis of ethylene oxide. Gel permeation chromatography showed that a low-molecular-size fraction was required for activity; accordingly, the kinetics of ethylene oxidation in the presence of this fraction were studied. Reduced pyridine nucleotides could substitute for the low-molecular-size fraction. Activity under a nitrogen atmosphere was 60% lower than in air. The need for reduced nicotinamide adenine dinucleotide phosphate (NADPH) and oxygen indicated that the enzyme might be a mixed-function oxidase. Using sufficient NADPH to approach saturation, the apparent Michaelis constant (K _m) for ethylene was 1.94±0.38 · 10^-8 M (aqueous phase), and when ethylene was saturating, the K _m for NADPH was 3.7 · 10^-5 M. Carbon monoxide was found to inhibit by competing with ethylene, and the inhibitor constant was 5.97 · 10^-7 M in solution. In the presence of excess ethylene and NADPH, activity was highest in phosphate-buffered medium pH 7.9. The bulk of the activity was found in a microsomal fraction.Abbreviations Epps N-2-hydroxyethylpiperazine-N-3-propane sulphinic acid - Tris 2-amino-2-(hydroxymethyl)-1,3-porpanediol     

Materials Flow Analysis of the Italian Economy

This article analyzes the mass of the materials that flowed through the Italian economy during 1994 and compares the results with a similar analysis of Germany, Japan, the Netherlands, and the United States published by a collaboration headed by the World Resources Institute. In order to perform this comparison, we have evaluated the mass of the materials produced within the country and the mass of the imported materials and commodities. For the domestic production, imports and exports, we have also evaluated the mass of the materials that accompany—as "hidden flows"—each physical flow.
Our analysis indicates that, in 1994, Italy experienced total material requirements (TMR) of 1,609 million metric tons (Mt), of which 727 Mt was used as direct material input (DMI). A comparison with other developed countries shows that the TMR and DMI flows, measured in mass per person and in mass per GDP unit, are, in Italy, lower than the corresponding figures evaluated for the United States, Germany, and the Netherlands. An interpretation of these results is presented. The analysis may give information useful for environmental considerations, although the limits of such an approach are made clear.     

Oxidation of lactaldehyde by cytosolic aldehyde dehydrogenase and inhibition of cytosolic and mitochondrial aldehyde dehydrogenase by metabolites

An enzyme fraction which oxidizes lactaldehyde to lactic acid has been purified from goat liver. This enzyme was found to be identical with the cytosolic aldehyde dehydrogenase. Lactaldehyde was found to be primarily oxidized by this enzyme. Almost 90% of the total lactaldehyde-oxidizing activity is located in the cytosol. Methylglyoxal and glyceraldehyde 3-phosphate were found to be strong competitive inhibitors of this enzyme. Aldehyde dehydrogenase from goat liver mitochondria has also been partially purified and found to be strongly inhibited by these metabolites. The inhibitory effects of these metabolites on both these enzymes are highly pH dependent. The inhibitory effects of both the metabolites have been found to be stronger for the cytosolic enzyme at pH values higher than the physiological pH. For the mitochondrial enzyme, the inhibition with methylglyoxal was more pronounced at higher pH values, whereas stronger inhibition was observed with glyceraldehyde 3-phosphate at physiological pH.     

Microbial Metabolism of Benzene and the Oxidation of Ferrous Iron under Anaerobic Conditions: Implications for Bioremediation

Benzene and toluene were biodegraded when chelated Fe(III) served as the terminal electron acceptor in aquifer sediments contaminated by a petroleum refinery. Benzene biodegradation ceased when Fe(III) was depleted but resumed upon reamendment. Microorganisms from the same sediments degraded toluene, but not benzene, under nitrate reducing conditions. However, the anaerobic oxidation of Fe(II) to Fe(III) was also observed in toluene-degrading incubations. Fe(II) oxidation was dependent on the presence of nitrate and enhanced when organic electron donors were provided. Microbial nitrate-linked Fe(II) oxidation was also documented in other petroleum-contaminated aquifer sediments, sludge from an oil–water separator, a landfill leachate-impacted aquifer and a garden soil. These observations suggest that some of the reported effects of nitrate on hydrocarbon biodegradation may be indirect through the reoxidation of Fe(II).     

Graphene Multilayer Supported Gold Nanoparticles for Efficient Electrocatalysts Toward Methanol Oxidation

This study reports a simple method of integrating electroactive gold nanoparticles (Au NPs) with graphene oxide (GO) nanosheet support by layer‐by‐layer (LbL) assembly for the creation of 3‐dimensional electrocatalytic thin films that are active toward methanol oxidation. This approach involves the alternating assembly of two oppositely charged suspensions of Au NPs with GO nanosheets based on electrostatic interactions. The GO nanosheets not only serve as structural components of the multilayer thin film, but also potentially improve the utilization and dispersion of Au NPs by taking advantages of the high catalytic surface area and the electronic conduction of graphene nanosheets. Furthermore, it is found that the electrocatalytic activity of the multilayer thin films of Au NPs with graphene nanosheet is highly tunable with respect to the number of bilayers and thermal treatment, benefiting from the advantageous features of LbL assembly. Because of the highly versatile and tunable properties of LbL assembled thin films coupled with electrocatalytic NPs, we anticipate that the general concept presented here will offer new types of electroactive catalysts for direct methanol fuel cells.     

种植体稳定系数测定与种植体负重时机选择

目的:通过测量ITI和Osstem-SS种植系统的稳定系数(ISQ),评价这两种种植体的骨结合情况,为临床确定其上部结构修复时机提供依据。方法:93例牙列缺损患者共植入179颗种植体,根据患者种植区骨量情况分为两组,其中A组为种植区骨量良好,不需骨增量手术病例(62例);B组为种植区骨量不足,需进行骨增量手术病例(31例)。A组共植入125颗种植体,其中ITI种植系统64颗,OSSTEM-SS种植系统61颗;B组共植入54颗种植体,其中ITI种植系统28颗,OSSTEM-SS种植系统26颗。术后即刻及第4、6、8、12、16、24周分别测量各时期种植体稳定系数(ISQ),并同期进行临床和影像学检查。结果:A组中ITI种植系统术后8周ISQ值平均(74.17±1.85),进行负重;OSSTEM-SS种植系统术后12周ISQ值平均(72.00±2.59),进行负重。B组中ITI种植系统术后16周ISQ值平均(65.09±3.42),进行负重;OSSTEM-SS种植系统术后24周ISQ值平均(62.09±6.16),进行负重。负重后临床随访3-24个月所有病例均成功,咀嚼功能良好,患者满意。结论:种植体稳定系数(ISQ)能反应种植体骨结合情况,可以协助医生选择种植后合适的冠修复时机。     

Saving Energy versus Saving Materials

To reduce energy consumption and carbon dioxide (CO₂) emissions in housing construction, the energy-intensive processes and life-cycle stages should be identified and integrated. The environmental impact of vertically integrated factory-built homes (VIHs) constructed with increased material inputs in Japan's northern island of Hokkaido was assessed using life-cycle inventory (LCI) analysis methods. Manufacturing process energy and CO₂ intensities of the homes were evaluated based on the material inputs. They were compared with those of a counterpart home hypothetically built using the vertically integrated construction methods, but in accordance with the specifications of a less material-intensive conventional home (CH) in Hokkaido today. Cumulative household energy consumption and CO₂ emissions were evaluated and compared with those of the production stages. The annual household energy consumption was compared among a VIH, a CH, and an average home in Hokkaido. The energy intensity of the VIH was 3.9 GJ production energy per m² of floor area, 59% higher than that of the CH. Net CO₂ emissions during VIH manufacturing processes were 293 kg/m², after discounting the carbon fixation during tree growth. The cumulative use-phase household energy consumption and CO₂ emissions of a VIH will exceed energy consumption and CO₂ emissions during the initial production stage in less than six years. Although VIHs housed 21% more residents on average, the energy consumption per m2 was 17% lower than that of a CH. This may indicate that using more materials initially can lead to better energy efficiency.     

Dendrimers as Functional Materials. A Molecular Simulation Study of Poly(propylene) Imine Starburst Molecules

Abstract

Dendritic macromolecules are hyperbranched polymers that emanate from a central core, have a defined number of generations and functional end groups, and are synthesized in a stepwise process by a repetitive reaction sequence. This hyperbranched topology results in a unique series of physical and chemical properties exhibited by these molecules which, in turn, could be exploited in a number of diverse possible applications, such as nanoscale catalysis, micelle mimics, immuno-diagnostic and NMR imaging agents, chemical sensors, molecular antennae, just to name a few.

Nonetheless, if on one hand the synthesis procedure allows for control over parameters such as size, shape and reactivity (and hence, on final properties), on the other hand it really hampers the production of large quantities of these materials. Accordingly, their cost is still quite high and, therefore, the materials available for characterization is still rather limited.

Since, however, their full application potentials (particularly in material science and engineering) will not be realized before the understanding of their physical properties is considerably more advanced, in this work we report the results obtained on structural details and related properties of several amine- and nitrile-terminated poly(propylene)imine dendrimer generations by computer simulation studies and discuss them in the light of (scarce) available experimental data.     

Sub‐3 nm Ultrafine Monolayer Layered Double Hydroxide Nanosheets for Electrochemical Water Oxidation

This study reports the synthesis of ultrafine NiFe‐layered double hydroxide (NiFe‐LDH) nanosheets, possessing a size range between 1.5 and 3.0 nm with a thickness of 0.6 nm. Abundant metal and oxygen vacancies impart the ultrafine nanosheets with semi‐metallic character, and thus superior charge transfer properties and electrochemical water oxidation performance with overpotentials (η) of 254 mV relative to monolayer LDH nanosheets (η of 280 mV) or bulk LDH materials (η of 320 mV) at 10 mA cm^?2. These results are highly encouraging for the future application of ultrafine monolayer LDH nanosheets in electronics, solar cells, and catalysis.     

Materials Flows in Finland: Resource Use in a Small Open Economy

In this article, the development of natural resource use in Finland during the period 1970-1997 is analyzed. In measuring natural resource use, the concept of total material requirement (TMR) is applied. The focus is on the linkages of resource use with the changing structures of the economy. The linkages are studied using input-output analysis.
Using input-output analysis, the TMR is further partitioned into resources used for domestic final use or for total material consumption (TMC) and total material requirement of exports (TME). The analysis shows that TMR has the problem of double accounting: if the TMRs of all countries of the world are summed, then international trade would be accounted for twice in the world TMR, once in imports and once in exports of each country.
The TMC concept does not have this kind of defect. In a small, open economy like that of Finland, where the share of foreign trade is large, the difference between the TMR and the TMC is also large. We show that by 1997, the TME comprised about half of Finland's TMR and that the growth of the TMR over the study period has been due to the TME only as the TMC has stayed rather constant.     

Oxidation of methionines by oxochromium(V) cations: a kinetic and spectral study

The oxidation of methionine (Met) plays an important role during biological conditions of oxidative stress as well as for protein stability. By choosing [oxo(salen)chromium(V)] ions, [(salen)Cr(V)=O](+) (where salen = bis(salicylidene)ethylenediamine) as suitable biomimics for the peptide complexes that are formed during the reduction of Cr(VI) with biological reductants, the oxidation of methionine and substituted methionines with five [oxo(salen)chromium(V)] complexes in aqueous acetonitrile has been investigated by spectrophotometric, electron paramagnetic resonance (EPR) spectroscopy and electrospray ionization mass spectrometry (ESI-MS) methods. In aqueous solution [(salen)Cr(V)=O](+) ion is short lived, ligation of H(2)O to the Cr center takes place and [O=Cr(V)(salen)-H(2)O](+) adduct is the active oxidant. The reaction is found to be first order each in the oxidant and the substrate. The presence of water in the reaction system accelerates the reaction rate and an inactive, stable mu-oxo dimer is also formed during the course of the reaction. On the basis of spectral, kinetic and product analysis study a mechanism involving direct oxygen transfer from [O=Cr(V)(salen)-H(2)O](+) to methionine has been proposed as a suitable mechanism for the reaction.     

Analysis of Oxidation Sensitivity of Maleate cis-trans Isomerase from Serratia marcescens

The maleate cis-trans isomerase gene (maiA) from Serratia marcescens IFO3736 was cloned and sequenced. Serratia MaiA has 62.4% amino acid identity with Alcaligenes faecalis IFO13111 MaiA and 64.9% with Bacillus stearothermophilus MI-102 MaiA. All known ten amino acid sequences of MaiA had significant conserved regions containing cysteine residues, which were previously suggested to be involved in an active site of the enzyme. The maiA gene was expressed in Escherichia coli, and expressed products MaiA was purified and characterized. The purified enzyme of strain IFO3736 showed high activity at room temperature and high heat stability. It also showed higher activity in the presence of high concentration of aspartic acid than the enzyme of A. faecalis IFO13111, but it was also sensitive to chemical oxidation. By amino acid composition analysis, cysteine, methionine, and tyrosine residues were suggested to be oxidized to inactivate the enzyme by chemical oxidation. To investigate the mechanism of chemical oxidation of the enzyme, six methionine residues in the conserved regions of S. marcescens MaiA were replaced with cysteine residues by site-directed mutagenesis. The analysis of the constructed mutants suggested that the Met201 residue near the Cys198 residue is involved in the sensitivity of the enzyme to chemical oxidation.     

Oxygen Dependency of Neutrophilic Fe(II) Oxidation by Leptothrix Differs from Abiotic Reaction

Neutrophilic Fe(II) oxidizing microorganisms are found in many natural environments. It has been hypothesized that, at low oxygen concentrations, microbial iron oxidation is favored over abiotic oxidation. Here, we compare the kinetics of abiotic Fe(II) oxidation to oxidation in the presence of the bacterium Leptothrix cholodnii Appels isolated from a wetland sediment. Rates of Fe(II) oxidation were determined in batch experiments at 20°C, pH 7 and oxygen concentrations between 3 and 120 μmol/l. The reaction progress in experiments with and without cells exhibited two distinct phases. During the initial phase, the oxygen dependency of microbial Fe(II) oxidation followed a Michaelis-Menten rate expression (K_M = 24.5 ± 10 μmol O₂/l, v_max = 1.8 ± 0.2 μmol Fe(II)/(l min) for 10⁸ cells/ml). In contrast, abiotic rates increased linearly with increasing oxygen concentrations. At similar oxygen concentrations, initial Fe(II) oxidation rates were faster in the experiments with bacteria. During the second phase, the accumulated iron oxides catalyzed further oxidative iron precipitation in both abiotic and microbial reaction systems. That is, abiotic oxidation also dominated the reaction progress in the presence of bacteria. In fact, in some experiments with bacteria, iron oxidation during the second phase proceeded slower than in the absence of bacteria, possibly due to an inhibitory effect of extracellular polymeric substances on the growth of Fe(III) oxides. Thus, our results suggest that the competitive advantage of microbial iron oxidation in low oxygen environments may be limited by the autocatalytic nature of abiotic Fe(III) oxide precipitation, unless the accumulation of Fe(III) oxides is prevented, for example, through a close coupling of Fe(II) oxidation and Fe(III) reduction.     

豌豆叶片线粒体内甘氨酸氧化对苹果酸和异柠檬酸氧化的影响

豌豆幼苗叶片线粒体中,Gly,Mal和Isocit的氧化速率均受光促进。Gly的氧化抑制Mal和Isocit的氧化,而其本身不受影响。用INH抑制Gly氧化或提高NAD~+浓度均会降低其抑制程度。线粒体氧化Gly,Mal和Isocit的K_m(NAD~+)分别为66.67,119.1μmol/L和152.2μmol/L。Gly抑制Mal和Isocit氧化是由于Gly氧化在竞争NAD~+中占优势。     

Tuning Electronic Structure of NiFe Layered Double Hydroxides with Vanadium Doping toward High Efficient Electrocatalytic Water Oxidation

Binary NiFe layer double hydroxide (LDH) serves as a benchmark non‐noble metal electrocatalyst for the oxygen evolution reaction, however, it still needs a relatively high overpotential to achieve the threshold current density. Herein the catalyst's electronic structure is tuned by doping vanadium ions into the NiFe LDHs laminate forming ternary NiFeV LDHs to reduce the onset potential, achieving unprecedentedly efficient electrocatalysis for water oxidation. Only 1.42 V (vs reversible hydrogen electrode (RHE), ≈195 mV overpotential) is required to achieve catalytic current density of 20 mA cm^?2 with a small Tafel slope of 42 mV dec^?1 in 1 m KOH solution, which manifests the best of NiFe‐based catalysts reported till now. Electrochemical analysis and density functional theory +U simulation indicate that the high catalytic activity of NiFeV LDHs mainly attributes to the vanadium doping which can modify the electronic structure and narrow the bandgap thereby bring enhanced conductivity, facile electron transfer, and abundant active sites.     

Predicting Calendar Aging in Lithium Metal Secondary Batteries: The Impacts of Solid Electrolyte Interphase Composition and Stability

Calendar aging of lithium metal batteries, in which cells' components degrade internally due to chemical reactions while no current is being applied, is a relatively unstudied field. In this work, a model to predict calendar aging of lithium metal cells is developed using two sets of readily obtainable data: solid electrolyte interphase (SEI) layer composition (measured via X‐ray photoelectron spectroscopy) and SEI stability (measured as a degradation rate using a simple constant current–constant voltage charging protocol). Electrolyte properties such as volume and salt concentration are varied in order to determine their effect on SEI stability and composition, with subsequent impacts to calendar aging. Lower salt concentrations produce a solvent‐based, more soluble SEI, while the highest concentration produces a salt‐based, less soluble SEI. Higher electrolyte volumes promote dissolution of the SEI and thus decrease its stability. The model predicts that lithium metal would be the limiting factor in calendar aging, depleting long before the electrolyte does. Additionally, the relative composition of the electrolyte during aging is modeled and found to eventually converge to the same value independent of initial salt concentration.     

Molecular Engineering of Copper Phthalocyanines: A Strategy in Developing Dopant‐Free Hole‐Transporting Materials for Efficient and Ambient‐Stable Perovskite Solar Cells

Copper (II) phthalocyanines (CuPcs) have attracted growing interest as promising hole‐transporting materials (HTMs) in perovskite solar cells (PSCs) due to their low‐cost and excellent stability. However, the most efficient PSCs using CuPc‐based HTMs reported thus far still rely on hygroscopic p‐type dopants, which notoriously deteriorate device stability. Herein, two new CuPc derivatives are designed, namely CuPc‐Bu and CuPc‐OBu, by molecular engineering of the non‐peripheral substituents of the Pc rings, and applied as dopant‐free HTMs in PSCs. Remarkably, a small structural change from butyl groups to butoxy groups in the substituents of the Pc rings significantly influences the molecular ordering and effectively improves the hole mobility and solar cell performance. As a consequence, PSCs based on dopant‐free CuPc‐OBu as HTMs deliver an impressive power conversion efficiency (PCE) of up to 17.6% under one sun illumination, which is considerably higher than that of devices with CuPc‐Bu (14.3%). Moreover, PSCs containing dopant‐free CuPc‐OBu HTMs show a markedly improved ambient stability when stored without encapsulation under ambient conditions with a relative humidity of 85% compared to devices containing doped Spiro‐OMeTAD. This work thus provides a fundamental strategy for the future design of cost‐effective and stable HTMs for PSCs and other optoelectronic devices.     

Materials Flow Accounting in Sweden Material Use for National Consumption and for Export

This article presents Swedish economy‐wide material flow accounts for the period 1987‐1998. It also shows possibilities for enhancing the international comparability of aggregated data on material use, by distinguishing between materials used for consumption and export purposes. The direct material input (DMI) is used as an aggregate measure to estimate the amounts of natural resources (except water and air) that are taken from nature into the economy within a year, including imports to and production within the region in question. The division of materials used for consumption and export purposes avoids double counting trade flows when DMI is applied to a group of countries. The annual DMI in Sweden for 1997‐1998, including production and imports, amounts to 24 to 27 metric tons per capita (t/c). The fossil fuel input varies only slightly over the period, from 3.2 t/c in 1991 to 3.6 t/c in 1996, a level deemed unsustainable by the Swedish Environmental Protection Agency. The input of renewable raw materials varies between 8 and 9 t/c. Ores and minerals vary between 11 and 15 t/c. The DMI puts Sweden above estimates made for Germany, the United States, and Japan and in the same range as the Netherlands. The differences in these values can mainly be explained by the relative importance of exports as compared to the size of the economy and by the variation in system boundaries for the data on natural resources. The system boundaries and data sources for natural resources need to be further defined to make the measures fully comparable. Around 5 t/c is exported, whereas the rest, around 20 t/c, is national consumption. The aggregate direct material consumption (DMC), which is the DMI minus exports, communicates the magnitude of resource use. Comparisons of the input with solid waste statistics indicate that quantity of waste (excluding mining waste) in Sweden is equal to about 10% relative of the total resource use. Material collected for recycling by the waste management system is equal to about 5% of the amount of virgin resources brought into society each year.     

Efficient BiVO4 Photoanode with an Excellent Hole Transport Layer of CuSCN for Solar Water Oxidation

Bismuth vanadate (BiVO₄) is reported as a key material in photoelectrocatalysis owing to high theoretical efficiency, relatively narrow band gap of 2.4 eV, and favorable conduction band edge position for hydrogen evolution. However, the sluggish hole transport dynamics lead to slow photogenerated charge separation and transport efficiencies, which result in charge recombination due to aggregation. Herein, a novel hole transport layer of copper(I) thiocyanate (CuSCN) with the aim of significantly enhancing the efficiency of charge transport and stability of BiVO₄ photoanodes is reported. The introduction of the hole transport layer could provide an appropriate intermediate energy level for photogenerated hole transfer and avoid charge recombination and trapping. After a photoassisted electrodeposition process of NiCoFe-B_i catalysis, the obtained photoanode achieves a photocurrent density of 5.6 mA cm⁻² at 1.23 V versus reversible hydrogen electrode under AM 1.5 G simulated solar radiation, and an applied bias photon to current efficiency of 2.31%. With the CuSCN layer, BiVO₄ photoanode presented impressive stable photocurrent during 50 h continuous illumination. Meanwhile, the unbiased tandem device of the NiCoFe-B_i/CuSCN/BiVO₄ photoanode and the Si solar cell exhibit a solar-to-hydrogen efficiency of 5.75% and excellent stability for 14 h.