Stabilizing the Efficiency Beyond 20% with a Mixed Cation Perovskite Solar Cell Fabricated in Ambient Air under Controlled Humidity

Perovskite solar cells have evolved to have compatible high efficiency and stability by employing mixed cation/halide type perovskite crystals as pinhole‐free large grain absorbers. The cesium (Cs)–formamidium–methylammonium triple cation‐based perovskite device fabricated in a glove box enables reproducible high‐voltage performance. This study explores the method to reproduce stable and high power conversion efficiency (PCE) of a triple cation perovskite prepared using a one‐step solution deposition and low‐temperature annealing fully conducted in controlled ambient humidity conditions. Optimizing the perovskite grain size by Cs concentration and solution processes, a route is created to obtain highly uniform, pinhole‐free large grain perovskite films that work with reproducible PCE up to 20.8% and high preservation stability without cell encapsulation for more than 18 weeks. This study further investigates the light intensity characteristics of open‐circuit voltage (V_oc) of small (5 × 5 mm², PCE > 20%) and large (10 × 10 mm², PCE of 18%) devices. Intensity dependence of V_oc shows an ideality factor in the range of 1.7‐1.9 for both devices, implying that the triple cation perovskite involves trap‐assisted recombination loss at the hetero junction interfaces that influences V_oc. Despite relatively high ideality factor, perovskite device is capable of supplying high power conversion efficiency under low light intensity (0.01 Sun) whereas maintaining V_oc over 0.9 V.     

New Anthracene‐Fused Nonfullerene Acceptors for High‐Efficiency Organic Solar Cells: Energy Level Modulations Enabling Match of Donor and Acceptor

Two new nonfullerene small molecule acceptors (NF‐SMAs) AT‐NC and AT‐4Cl based on heptacyclic anthracene(cyclopentadithiophene) (AT) core and different electron‐withdrawing end groups are designed and synthesized. Although the two new acceptor molecules use two different end groups, naphthyl‐fused indanone (NINCN) and chlorinated INCN (INCN‐2Cl) demonstrate similar light absorption. AT‐4Cl with chlorinated INCN as end groups are shifted significantly due to the strong electron‐withdrawing ability of chlorine atoms. Thus, desirable V_oc and photovoltaic performance are expected to be achieved when polymer PBDB‐T is used as the electron donor with AT‐NC as the acceptor, and fluorinated analog PBDB‐TF with down‐shifted energy levels is selected to blend with AT‐4Cl. Consequently, the device based on PBDB‐TF:AT‐4Cl yields a high power conversion efficiency of 13.27% with a slightly lower V_oc of 0.901 V, significantly enhanced J_sc of 19.52 mA cm^?2 and fill factor of 75.5% relative to the values based on PBDB‐T:AT‐NC. These results demonstrate that the use of a new electron‐rich AT core, together with energy levels modulations by end‐group optimizations enabling the match with polymer donors, is a successful strategy to construct high‐performance NF‐SMAs.     

8.0% Efficient All‐Polymer Solar Cells with High Photovoltage of 1.1 V and Internal Quantum Efficiency near Unity

In very recent years, growing efforts have been devoted to the development of all‐polymer solar cells (all‐PSCs). One of the advantages of all‐PSCs over the fullerene‐based PSCs is the versatile design of both donor and acceptor polymers which allows the optimization of energy levels to maximize the open‐circuit voltage (V_oc). However, there is no successful example of all‐PSCs with both high V_oc over 1 V and high power conversion efficiency (PCE) up to 8% reported so far. In this work, a combination of a donor polymer poly[4,8‐bis(5‐(2‐octylthio)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(5‐(2‐ethylhexyl)‐4H‐thieno[3,4‐c]pyrrole‐4,6(5H)‐dione)‐1,3‐diyl] (PBDTS‐TPD) with a low‐lying highest occupied molecular orbital level and an acceptor polymer poly[[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐thiophene‐2,5‐diyl] (PNDI‐T) with a high‐lying lowest unoccupied molecular orbital level is used, realizing high‐performance all‐PSCs with simultaneously high V_oc of 1.1 V and high PCE of 8.0%, and surpassing the performance of the corresponding PC₇₁BM‐based PSCs. The PBDTS‐TPD:PNDI‐T all‐PSCs achieve a maximum internal quantum efficiency of 95% at 450 nm, which reveals that almost all the absorbed photons can be converted into free charges and collected by electrodes. This work demonstrates the advantages of all‐PSCs by incorporating proper donor and acceptor polymers to boost both V_oc and PCEs.     

Hybrid Perovskite‐Organic Flexible Tandem Solar Cell Enabling Highly Efficient Electrocatalysis Overall Water Splitting

Perovskite‐organic tandem solar cells are attracting more attention due to their potential for highly efficient and flexible photovoltaic device. In this work, efficient perovskite‐organic monolithic tandem solar cells integrating the wide bandgap perovskite (1.74 eV) and low bandgap organic active PBDB‐T:SN6IC‐4F (1.30 eV) layer, which serve as the top and bottom subcell, respectively, are developed. The resulting perovskite‐organic tandem solar cells with passivated wide‐bandgap perovskite show a remarkable power conversion efficiency (PCE) of 15.13%, with an open‐circuit voltage (V_oc) of 1.85 V, a short‐circuit photocurrent (J_sc) of 11.52 mA cm^?2, and a fill factor (FF) of 70.98%. Thanks to the advantages of low temperature fabrication processes and the flexibility properties of the device, a flexible tandem solar cell which obtain a PCE of 13.61%, with V_oc of 1.80 V, J_sc of 11.07 mA cm^?2, and FF of 68.31% is fabricated. Moreover, to demonstrate the achieved high V_oc in the tandem solar cells for potential applications, a photovoltaic (PV)‐driven electrolysis system combing the tandem solar cell and water splitting electrocatalysis is assembled. The integrated device demonstrates a solar‐to‐hydrogen efficiency of 12.30% and 11.21% for rigid, and flexible perovskite‐organic tandem solar cell based PV‐driven electrolysis systems, respectively.     

Simultaneous Open‐Circuit Voltage Enhancement and Short‐Circuit Current Loss in Polymer: Fullerene Solar Cells Correlated by Reduced Quantum Efficiency for Photoinduced Electron Transfer

The limits of maximizing the open‐circuit voltage V_oc in solar cells based on poly[2,7‐(9,9‐didecylfluorene)‐alt‐5,5‐(4,7‐di‐2‐thienyl‐2,1,3‐benzothiadiazole)] (PF10TBT) as a donor using different fullerene derivatives as acceptor are investigated. Bulk heterojunction solar cells with PF10TBT and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) give a V_oc over 1 V and a power conversion efficiency of 4.2%. Devices in which PF10TBT is blended with fullerene bisadduct derivatives give an even higher V_oc, but also a strong decrease in short circuit current (J_sc). The higher V_oc is attributed to the higher LUMO of the acceptors in comparison to PCBM. By investigating the photophysics of PF10TBT:fullerene blends using near‐IR photo‐ and electroluminescence, time‐resolved photoluminescence, and photoinduced absorption we find that the charge transfer (CT) state is not formed efficiently when using fullerene bisadducts. Hence, engineering acceptor materials with a LUMO level that is as high as possible can increase V_oc, but will only provide a higher power conversion efficiency, when the quantum efficiency for charge transfer is preserved. To quantify this, we determine the CT energy (E_CT) and optical band gap (E_g), defined as the lowest first singlet state energy E_S1 of either the donor or acceptor, for each of the blends and find a clear correlation between the free energy for photoinduced electron transfer and J_sc. We find that E_g ? qV_oc > 0.6 eV is a simple, but general criterion for efficient charge generation in donor‐acceptor blends.     

Efficient Organic Solar Cells with Extremely High Open‐Circuit Voltages and Low Voltage Losses by Suppressing Nonradiative Recombination Losses

One of the most important factors that limits the efficiencies of bulk‐heterojunction organic solar cells (OSCs) is the modest open‐circuit voltage (V_oc) due to their large voltage loss (V_loss) caused by significant nonradiative recombination loss. To boost the performance of OSCs toward their theoretical limit, developing high‐performance donor: acceptor systems featuring low V_loss with suppressed nonradiative recombination losses (<0.30 V) is desired. Herein, high performance OSCs based on a polymer donor benzodithiophene‐difluorobenzoxadiazole‐2‐decyltetradecyl (BDT‐ffBX‐DT) and perylenediimide‐based acceptors (PDI dimer with spirofluorene linker (SFPDI), PDI4, and PDI6) are reported which offer a high power conversion efficiency (PCE) of 7.5%, 56% external quantum efficiency associated with very high V_oc (>1.10 V) and low V_loss (<0.60 V). A high V_oc up to 1.23 V is achieved, which is among the highest values reported for OSCs with a PCE beyond 6%, to date. These attractive results are benefit from the suppressed nonradiative recombination voltage loss, which is as low as 0.20 V. This value is the lowest value for OSCs so far and is comparable to high performance crystalline silicon and perovskite solar cells. These results show that OSCs have the potential to achieve comparable V_oc and voltage loss as inorganic photovoltaic technologies.     

Achieving Both Enhanced Voltage and Current through Fine‐Tuning Molecular Backbone and Morphology Control in Organic Solar Cells

It is a great challenge to simultaneously improve the two tangled parameters, open circuit voltage (V_oc) and short circuit current density (J_sc) for organic solar cells (OSCs). Herein, such a challenge is addressed by a synergistic approach using fine‐tuning molecular backbone and morphology control simultaneously by a simple yet effective side chain modulation on the backbone of an acceptor–donor–acceptor (A–D–A)‐type acceptor. With this, two terthieno[3,2‐b]thiophene (3TT) based A–D–A‐type acceptors, 3TT‐OCIC with backbone modulation and 3TT‐CIC without such modification, are designed and synthesized. Compared with the controlled molecule 3TT‐CIC, 3TT‐OCIC shows power conversion efficiency (PCE) of 13.13% with improved V_oc of 0.69 V and J_sc of 27.58 mA cm^?2, corresponding to PCE of 12.15% with V_oc of 0.65 V and J_sc of 27.04 mA cm^?2 for 3TT‐CIC–based device. Furthermore, with effective near infrared absorption, 3TT‐OCIC is used as the rear subcell acceptor in a tandem device and gave an excellent PCE of 15.72%.     

Significant Effect of Fluorination on Simultaneously Improving Work Function and Transparency of Anode Interlayer for Organic Solar Cells

Since the highest occupied molecular orbital (HOMO) level of donors in organic solar cells (OSCs) is being constantly downshifted for achieving high open‐circuit voltage (V_oc), a further enhancement of the anode work function (WF) is required. Herein, an effective approach of fluorination is demonstrated to simultaneously improve the WF and transparency for anode interlayer (AIL) material. By fluorination, in combination with the dialysis treatment in LiCl solution, the WF of PCP‐2F‐Li could be significantly enhanced from 4.86 to 5.0 eV, as compared to PCP‐Na. Meanwhile, the transparency of the polymer is also improved. As a result, PCP‐2F‐Li can be used to modify efficient active layers consisting of polymer donors with deep HOMO levels, such as PBDB‐T‐2F:IT‐4F, and an outstanding power conversion efficiency (PCE) of 12.7% is achieved in the corresponding device with a high V_oc of 0.84 V. This result represents the highest efficiency for the OSCs using a solution‐processed pH‐neutral AIL, which is beneficial to the low‐cost fabrication of high‐performance OSCs with improved stability. More importantly, PCP‐2F‐Li could be processed by blade coating for making large‐area device of 1 cm², and a PCE of 10.6% is achieved, bringing a promising prospect for the large‐area device fabrication.     

A New Interconnecting Layer of Metal Oxide/Dipole Layer/Metal Oxide for Efficient Tandem Organic Solar Cells

A new metal‐oxide‐based interconnecting layer (ICL) structure of all‐solution processed metal oxide/dipole layer/metal oxide for efficient tandem organic solar cell (OSC) is demonstrated. The dipole layer modifies the work function (WF) of molybdenum oxide (MoO _x ) to eliminate preexisted counter diode between MoO _x and TiO₂. Three different amino functionalized water/alcohol soluble conjugated polymers (WSCPs) are studied to show that the WF tuning of MoO _x is controllable. Importantly, the results show that S‐shape current density versus voltage (J–V) characteristics form when operation temperature decreases. This implies that thermionic emission within the dipole layer plays critical role for helping recombination of electrons and holes. Meanwhile, the insignificant homotandem open‐circuit voltage (V _oc) loss dependence on dipole layer thickness shows that the quantum tunneling effect is weak for efficient electron and hole recombination. Based on this ICL, poly(3‐hexylthiophene) (P3HT)‐based homotandem OSC with 1.20 V V _oc and 3.29% power conversion efficiency (PCE) is achieved. Furthermore, high efficiency poly(4,8‐bis(5‐(2‐ethylhexyl)‐thiophene‐2‐yl)‐benzo[1,2‐b54,5‐b9]dithiophene‐alt alkylcarbonylthieno[3,4‐b]thiophene) (PBDTTT‐C‐T)‐based homotandem OSC with 1.54 V V _oc and 8.11% PCE is achieved, with almost 15.53% enhancement compared to its single cell. This metal oxide/dipole layer/metal oxide ICL provides a new strategy to develop other qualified ICL with different hole transporting layer and electron transporting layer in tandem OSCs.     

Balancing High Open Circuit Voltage over 1.0 V and High Short Circuit Current in Benzodithiophene‐Based Polymer Solar Cells with Low Energy Loss: A Synergistic Effect of Fluorination and Alkylthiolation

Based on the most recently significant progress within the last one year in organic photovoltaic research from either alkylthiolation or fluorination on benzo[1,2‐b:4,5‐b′]dithiophene moiety for high efficiency polymer solar cells (PSCs), two novel simultaneously fluorinated and alkylthiolated benzo[1,2‐b:4,5‐b′] dithiophene (BDT)‐based donor–acceptor (D–A) polymers, poly(4,8‐bis(5′‐((2″‐ethylhexyl)thio)‐4′‐fluorothiophen‐2′‐yl)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl)‐alt‐2′‐ethylhexyl‐3‐fluorothieno[3,4‐b]thiophene‐2‐carboxylate (PBDTT‐SF‐TT) and poly(4,8‐bis(5′‐((2″‐ethylhexyl)thio)‐4′‐fluorothiophen‐2′‐yl)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl)‐alt‐1,3‐bis(thiophen‐2‐yl)‐5,7‐bis(2‐ethylhexyl)benzo[1,2‐c:4,5‐c′]dithiophene‐4,8‐dione (PBDTT‐SF‐BDD), namely, via an advantageous and synthetically economic route for the key monomer are reported herein. Synergistic effects of fluorination and alkylthiolation on BDT moieties are discussed in detail, which is based on the superior balance between high V_oc and large J_sc when PBDTT‐SF‐TT/PC₇₁BM and PBDTT‐SF‐BDD/PC₇₁BM solar cells present their high V_oc as 1.00 and 0.97 V (associated with their deep highest occupied molecular orbital level of ?5.54 and ?5.61 eV), a moderately high J_sc of 14.79 and 14.70 mA cm^?2, and thus result a high power conversion efficiency of 9.07% and 9.72%, respectively. Meanwhile, for PBDTT‐SF‐TT, a very low energy loss of 0.59 eV is pronounced, leading to the promisingly high voltage, and furthermore performance study and morphological results declare an additive‐free PSC from PBDTT‐SF‐TT, which is beneficial to practical applications.     

Disorder‐Induced Open‐Circuit Voltage Losses in Organic Solar Cells During Photoinduced Burn‐In

The photoinduced open‐circuit voltage (V_oc) loss commonly observed in bulk heterojunction organic solar cells made from amorphous polymers is investigated. It is observed that the total charge carrier density and, importantly, the recombination dynamics are unchanged by photoinduced burn‐in. Charge extraction is used to monitor changes in the density of states (DOS) during degradation of the solar cells, and a broadening over time is observed. It is proposed that the V_oc losses observed during burn‐in are caused by a redistribution of charge carriers in a broader DOS. The temperature and light intensity dependence of the V_oc losses can be described with an analytical model that contains the amount of disorder broadening in a Gaussian DOS as the only fit parameter. Finally, the V_oc loss in solar cells made from amorphous and crystalline polymers is compared and an increased stability observed in crystalline polymer solar cells is investigated. It is found that solar cells made from crystalline materials have a considerably higher charge carrier density than those with amorphous materials. The effects of a DOS broadening upon aging are suppressed in solar cells with crystalline materials due to their higher carrier density, making crystalline materials more stable against V_oc losses during burn‐in.     

Energetics and Energy Loss in 2D Ruddlesden–Popper Perovskite Solar Cells

2D Ruddlesden–Popper perovskites (RPPs) are emerging as potential challengers to their 3D counterpart due to superior stability and competitive efficiency. However, the fundamental questions on energetics of the 2D RPPs are not well understood. Here, the energetics at (PEA)₂(MA)_n?1Pb_nI_3n+1/[6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) interfaces with varying n values of 1, 3, 5, 40, and ∞ are systematically investigated. It is found that n–n junctions form at the 2D RPP interfaces (n = 3, 5, and 40), instead of p–n junctions in the pure 2D and 3D scenarios (n = 1 and ∞). The potential gradient across phenethylammonium iodide ligands that significantly decreases surface work function, promotes separation of the photogenerated charge carriers with electron transferring from perovskite crystal to ligand at the interface, reducing charge recombination, which contributes to the smallest energy loss and the highest open‐circuit voltage (V_oc) in the perovskite solar cells (PSCs) based on the 2D RPP (n = 5)/PCBM. The mechanism is further verified by inserting a thin 2D RPP capping layer between pure 3D perovskite and PCBM in PSCs, causing the V_oc to evidently increase by 94 mV. Capacitance–voltage measurements with Mott–Schottky analysis demonstrate that such V_oc improvement is attributed to the enhanced potential at the interface.     

Modified PEDOT Layer Makes a 1.52 V Voc for Perovskite/PCBM Solar Cells

The work functions for charge transport layers in perovskite solar cells affect device performance significantly. In this work, the regular poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is modified by adding a polymer electrolyte PSS‐Na to improve its HTL function in perovskite solar cells. The modified PEDOT:PSS films (called m‐PEDOT:PSS) possess higher work function than the regular one. Its energy level matches the valence band of perovskite very well, leading to enhanced V_oc and PCE (power conversion efficiency). When CH₃NH₃PbI₃ is used as the light absorber, the cell with PEDOT:PSS HTL gives a V_oc of 0.96 V and a PCE of 12.35%, while the cell with m‐PEDOT:PSS layer gives a V_oc of 1.11 V and a PCE of 15.56%. Enhanced V_oc and PCE are also achieved when CH₃NH₃PbI₂Br or CH₃NH₃PbBr₃ is used as the light absorber. The m‐PEDOT:PSS/CH₃NH₃PbBr₃/PC₆₁BM solar cells demonstrate an outstanding V_oc of 1.52 V.     

Engineering Processes at the Interface of p‐Semiconductor for Enhancing the Open Circuit Voltage in p‐Type Dye‐Sensitized Solar Cells

To prevent the interfacial charge recombination between injected holes in the valence band and the redox mediator in the electrolyte in p‐type dye sensitized solar cells (p‐DSSC) the passivation of the recombination sites by organic insulator chenodeoxycholic acid (CDCA) layer is critically investigated in this study. Rather than classical coating of the semiconductor's surface by simultaneous co‐adsorption of CDCA during the dyeing step, two other methods are investigated. The first consists in dissolving CDCA in the electrolyte, while the second consists in spin coating an ethanol solution of CDCA onto the already dyed photocathode. In this study, different sensitizers, electrolytes, and p‐SCs, (NiO, CuGaO₂) are explored. Analysis of the current/voltage curves and electrochemical impedance spectroscopy provides evidence that the role of the CDCA layer is to create a physical barrier to prevent the approach of the redox mediator from the NiO surface and consequently raise the open circuit voltage (V_oc). The important finding of this study is the demonstration that the V_oc in p‐DSSC is heavily limited by interfacial charge recombination and that higher V_oc values much above 100 mV and as high as 500 mV can be attained with conventional materials (NiO) if this deleterious side reaction can be suppressed or diminished.     

Extended π‐Bridge in Organic Dye‐Sensitized Solar Cells: the Longer,the Better?

The elongation of π‐conjugated bridges between the donor (D) and the acceptor (A) represents a feasible strategy towards enhancement of light‐harvesting in both breadth and depth of organic D‐π‐A dyes suitable for nanocrystalline TiO₂‐based dye‐sensitized solar cells (DSSCs). Here, a series of organic dyes with elongating conjugated bridges is synthesized and characterized. DSSC devices employing a cobalt (II/III) redox electrolyte are fabricated using these dyes as light‐harvesting sensitizers. Compared to a dye with the 3,4‐ethylenedioxythiophene (EDOT) linker ( G188 ), the three counterparts with further extended π‐bridges present gradually red‐shifted electronic absorption spectra and a persistent decrease in oxidation potential. The photocurrent action spectra show that the extension of π‐conjugated bridges decreases the open‐circuit photovoltage. The best performance is shown in G268 with a short‐circuit photocurrent density (J_sc) of 16.27 mA cm², an open‐circuit photovoltage (V_oc) of 0.83 V, and a fill factor (FF) of 0.67, corresponding to an overall conversion efficiency of 9.24%. Unexpectedly, G270, which has with the longest π‐bridge , showed the lowest J_sc, V_oc, and efficiency.     

Exploring the Limiting Open‐Circuit Voltage and the Voltage Loss Mechanism in Planar CH3NH3PbBr3 Perovskite Solar Cells

Perovskite solar cells based on CH₃NH₃PbBr₃ with a band gap of 2.3 eV are attracting intense research interests due to their high open‐circuit voltage (V_oc) potential, which is specifically relevant for the use in tandem configuration or spectral splitting. Many efforts have been performed to optimize the V_oc of CH₃NH₃PbBr₃ solar cells; however, the limiting V_oc (namely, radiative V_oc:V_oc,rad) and the corresponding ΔV_oc (the difference between V_oc,rad and V_oc) mechanism are still unknown. Here, the average V_oc of 1.50 V with the maximum value of 1.53 V at room temperature is achieved for a CH₃NH₃PbBr₃ solar cell. External quantum efficiency measurements with electroluminescence spectroscopy determine the V_oc,rad of CH₃NH₃PbBr₃ cells with 1.95 V and a ΔV_oc of 0.45 V at 295 K. When the temperature declines from 295 to 200 K, the obtained V_oc remains comparably stable in the vicinity of 1.5 V while the corresponding ΔV_oc values show a more significant increase. Our findings suggest that the V_oc of CH₃NH₃PbBr₃ cells is primarily limited by the interface losses induced by the charge extraction layer rather than by bulk dominated recombination losses. These findings are important for developing strategies how to further enhance the V_oc of CH₃NH₃PbBr₃‐based solar cells.     

Device Characteristics of an 11.4% CZTSe Solar Cell Fabricated from Sputtered Precursors

Kesterite is an attractive material for absorber layers in thin film photovoltaics. Solar cells based on kesterite have shown a substantial progress over the last decade; nevertheless, further improvements in device efficiency are pending due to the open‐circuit voltage (V_oc) deficit (i.e., difference between the maximum V _oc that can be achieved according to Shockley–Queisser limit and actual V _oc from the device). In this study, the optoelectronic properties of the author's internal record Cu₂ZnSnSe₄ solar cell, which shows a power conversion efficiency of 11.4%, are presented. The device measurements reveal a V_oc deficit of 337 mV, which is one of the lowest V _oc deficits in the literature. Moreover, an unusual behavior for kesterite is observed: (i) photon energy of the photoluminescence emission and (ii) the extrapolated V _oc for 0 K are both matching the band gap region of the absorber. These results indicate a significant improvement in the recombination characteristics and absorber quality in comparison to other kesterite devices in literature.     

A Novel Anion Doping for Stable CsPbI2Br Perovskite Solar Cells with an Efficiency of 15.56% and an Open Circuit Voltage of 1.30 V

The Cs‐based inorganic perovskite solar cells (PSCs), such as CsPbI₂Br, have made a striking breakthrough with power conversion efficiency (PCE) over 16% and potential to be used as top cells for tandem devices. Herein, I^? is partially replaced with the acetate anion (Ac^?) in the CsPbI₂Br framework, producing multiple benefits. The Ac^? doping can change the morphology, electronic properties, and band structure of the host CsPbI₂Br film. The obtained CsPbI_2?x Br(Ac)_x perovskite films present lower trap densities, longer carrier lifetimes, and fast charge transportation compared to the host CsPbI₂Br films. Interestingly, the CsPbI_2?x Br(Ac)_x PSCs exhibit a maximum PCE of 15.56% and an ultrahigh open circuit voltage (V_oc) of 1.30 V without sacrificing photocurrent. Notably, such a remarkable V_oc is among the highest values of the previously reported CsPbI₂Br PSCs, while the PCE far exceeds all of them. In addition, the obtained CsPbI_2?x Br(Ac)_x PSCs exhibit high reproducibility and good stability. The stable CsPbI_2?x Br(Ac)_x PSCs with high V_oc and PCE are desirable for tandem solar cell applications.     

Exploring the Stability of Novel Wide Bandgap Perovskites by a Robot Based High Throughput Approach

Currently, lead‐based perovskites with mixed multiple cations and hybrid halides are attracting intense research interests due to their promising stability and high efficiency. A tremendous amount of 3D and 2D perovskite compositions and configurations are causing a strong demand for high throughput synthesis and characterization. Furthermore, wide bandgap (≈1.75 eV) perovskites as promising top‐cell materials for perovskite–silicon tandem configurations require the screening of different compositions to overcome photoinduced halide segregation and still yielding a high open‐circuit voltage (V_oc). Herein, a home‐made high throughput robot setup is introduced performing automatic perovskite synthesis and characterization. Subsequently, four kinds of compositions (i.e., cation mixtures of Cs–methylammonium (MA), Cs– formamidinium (FA), MA–FA, and FA–MA) with an optical bandgap of ≈1.75 eV are identified as promising device candidates. For Cs–MA and Cs–FA films it is found that the Br–I phase segregation indeed can be overcome. Moreover, Cs–MA, MA–FA, and Cs–FA based devices exhibit an average V_oc of 1.17, 1.17, 1.12 V, and their maximum values approached 1.18, 1.19, 1.14 V, respectively, which are among the highest V_oc (≈1.2 V) values for ≈40% Br perovskite. These findings highlight that the high throughput approach can effectively and efficiently accelerate the invention of novel perovskites for advanced applications.     

Efficiency Exceeding 11% in Tandem Polymer Solar Cells Employing High Open‐Circuit Voltage Wide‐Bandgap π‐Conjugated Polymers

The emerging field of tandem polymer solar cells (TPSCs) enables a feasible approach to deal with the fundamental losses associated with single‐junction polymer solar cells (PSCs) and provides the opportunity to propel their overall performance. Additionally, the rational selection of appropriate subcell photoactive polymers with complementary absorption profiles and optimal thicknesses to achieve balanced photocurrent generation are very important issues which must be addressed in order to realize paramount device performance. Here, two side chain fluorinated wide‐bandgap π‐conjugated polymers P1 (2F) and P2 (4F) in TPSCs have been used. These π‐conjugated polymers have high absorption coefficients and deep highest occupied molecular orbitals which lead to high open‐circuit voltages (V_oc) of 0.91 and 1.00 V, respectively. Using these π‐conjugated polymers, TPSCs have been successfully fabricated by combining P1 or P2 as front cells with PTB7‐Th as back cells. The optimized TPSCs deliver outstanding power conversion efficiencies of 11.42 and 10.05%, with high V_oc's of 1.64 and 1.72 V, respectively. These results are analyzed by balance of charge mobilities, and optical and electrical modeling is combined to demonstrate simultaneous improvement in all photovoltaic parameters in TPSCs.