Excitation Dynamics in Low Band Gap Donor–Acceptor Copolymers and Blends

Donor–acceptor (D–A) type copolymers show great potential for the application in the active layer of organic solar cells. Nevertheless the nature of the excited states, the coupling mechanism and the relaxation pathways following photoexcitation are yet to be clarified. We carried out comparative measurements of the steady state absorption and photoluminescence (PL) on the copolymer poly[N‐(1‐octylnonyl)‐2,7‐carbazole]‐alt‐5,5‐[4′,7′‐di(thien‐2‐yl)‐2′,1′,3′‐benzothiadiazole] (PCDTBT), its building blocks as well as on the newly synthesized N‐(1‐octylnonyl)‐2,7‐bis‐[(5‐phenyl)thien‐2‐yl)carbazole (BPT‐carbazole). The high‐energy absorption band (HEB) of PCDTBT was identified with absorption of carbazoles with adjacent thiophene rings while the low‐energy band (LEB) originates instead from the charge transfer (CT) state delocalized over the aforementioned unit with adjacent benzothiadiazole group. Photoexcitation of the HEB is followed by internal relaxation prior the radiative decay to the ground state. Adding PC₇₀BM results in the efficient PL quenching within the first 50 ps after excitation. From the PL excitation experiments no evidence for a direct electron transfer from the HEB of PCDTBT towards the fullerene acceptor was found, therefore the internal relaxation mechanisms within PCDTBT can be assumed to precede. Our findings indicate that effective coupling between copolymer building blocks governs the photovoltaic performance of the blends.     

Charge Transport and Recombination in Low‐Bandgap Bulk Heterojunction Solar Cell using Bis‐adduct Fullerene

Charge transport and recombination are studied for organic solar cells fabricated using blends of polymer poly[(4,4′‐bis(2‐ethylhexyl)dithieno[3,2‐b:2′,3′‐d]silole)‐2,6‐diyl‐alt‐(4,7‐bis(2‐thienyl)‐2,1,3‐benzothiadiazole)‐5,5′‐diyl] (Si‐PCPDTBT) with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (mono‐PCBM) and the bis‐adduct analogue of mono‐PCBM (bis‐PCBM). The photocurrent of Si‐PCPDTBT:bis‐PCBM devices shows a strong square root dependence on the effective applied voltage. From the relationship between the photocurrent and the light intensity, we found that the square‐root dependence of the photocurrent is governed by the mobility‐lifetime (μτ) product of charge carriers while space‐charge field effects are insignificant. The fill factor (FF) and short circuit current density (J_sc) of bis‐PCBM solar cells show a considerable increase with temperature as compared to mono‐PCBM solar cells. SCLC analysis of single carrier devices proofs that the mobility of both electrons and holes is significantly lowered when replacing mono‐PCBM with bis‐PCBM. The increased recombination in Si‐PCPDTBT:bis‐PCBM solar cells is therefore attributed to the low carrier mobilities, as the transient photovoltage measurements show that the carrier lifetime of devices are not significantly altered by using bis‐PCBM instead of mono‐PCBM.     

Constructing High‐Performance Organic Photovoltaics via Emerging Non‐Fullerene Acceptors and Tandem‐Junction Structure

In consideration of the unique advantages of new non‐fullerene acceptors and the tandem‐junction structure, organic photovoltaics (OPVs) based on them are very promising. Studies related to this emerging area began in 2016 with achieved power conversion efficiencies (PCEs) of 8–10%, which have now been boosted to 17%. In this essay, the construction of high‐performance OPVs is discussed, with a focus on combining the advantages of new non‐fullerene acceptors and the tandem‐junction structure. In order to achieve higher PCEs, methods to enable high short‐circuit current density, open‐circuit voltage, and fill factor are discussed. In addition, the stability and reproducibility of high‐efficiency OPVs are also addressed. Herein, it is forecast that the new non‐fullerene acceptors‐based tandem‐junction OPVs will become the next big wave in the field and achieve high PCEs over 20% in the near future. Some promising research directions on this emerging hot topic are proposed which may further push the field into the 25% high efficiency era and considerably advance the technology beyond laboratory research.     

Germanium‐ and Silicon‐Substituted Donor–Acceptor Type Copolymers: Effect of the Bridging Heteroatom on Molecular Packing and Photovoltaic Device Performance

The effects of heteroatom substitution from a silicon atom to a germanium atom in donor‐acceptor type low band gap copolymers, poly[(4,4′‐bis(2‐ethylhexyl)dithieno[3,2‐b:2′,3′‐d]silole)‐2,6‐diyl‐alt‐(2,1,3‐benzothiadiazole)‐4,7‐diyl] (PSiBTBT) and poly[(4,4′‐bis(2‐ethylhexyl)dithieno[3,2‐b:2′,3′‐d]germole)‐2,6‐diyl‐alt‐(2,1,3‐benzothiadiazole)‐4,7‐diyl] (PGeBTBT), are studied. The optoelectronic and charge transport properties of these polymers are investigated with a particular focus on their use for organic photovoltaic (OPV) devices in blends with phenyl‐C₇₀‐butyric acid methyl ester (PC₇₀BM). It is found that the longer C‐Ge bond length, in comparison to C‐Si, modifies the molecular conformation and leads to a more planar chain conformation in PGeBTBT than PSiBTBT. This increase in molecular planarity leads to enhanced crystallinity and an increased preference for a face‐on backbone orientation, thus leading to higher charge carrier mobility in the diode configuration. These results provide important insight into the impact of the heavy atom substitution on the molecular packing and device performance of polymers based on the poly[2,6‐(4,4‐bis‐(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b;3,4‐b]‐dithiophene)‐alt‐4,7‐(2,1,3‐benzothiadiazole) (PCPDTBT) backbone.     

Low‐Temperature Behaviour of Charge Transfer Excitons in Narrow‐Bandgap Polymer‐Based Bulk Heterojunctions

Photoluminescence studies of the charge transfer exciton emission from a narrow‐bandgap polymer‐based bulk heterojunction are reported. The quantum yield of this emission is as high as 0.03%. Low temperature measurements reveal that while the dynamics of the singlet exciton is slower at low temperature, the dynamics of the charge transfer exciton emission is temperature independent. This behavior rules out any diffusion process of the charge transfer excitons and energy transfer from these interfacial states toward lower lying states. Photoluminescence measurements performed on the device under bias show a reduction (but not the total suppression) of the charge transfer exciton recombination. Finally, based on the low temperature results the role of the charge transfer excitons and the possible pathways to populate them are identified.     

Significance of Average Domain Purity and Mixed Domains on the Photovoltaic Performance of High‐Efficiency Solution‐Processed Small‐Molecule BHJ Solar Cells

Whereas the role of molecularly mixed domains in organic photovoltaic devices for charge generation is extensively discussed in the literature, the impact on charge recombination and thus fill factor is largely unexplored. Here, a combination of soft X‐ray techniques enables the quantification of phases at multiple length scales to reveal their role regarding charge recombination in a highly efficient solution processed small molecule system 7,7′‐(4,4‐bis(2‐ethylhexyl)‐4H‐silolo[3,2‐b:4,5‐b′]dithiophene‐2,6‐diyl)bis(6‐fluoro‐4‐(5′‐hexyl‐[2,2′‐bithiophen]‐5‐yl)benzo[c][1,2,5]thiadiazole) (p‐DTS(FBTTh₂)₂) . A quantitative (linear) relationship between the average composition variations and the device fill‐factor is observed. The results establish the complex interrelationship between average phase purity, domain size, and structural order and highlight the requirement of achieving sufficient phase purities to diminish bimolecular and geminate recombination in solution processed small molecule solar cells.     

Efficiency Improvement of Solution‐Processed Dithienopyrrole‐Based A‐D‐A Oligothiophene Bulk‐Heterojunction Solar Cells by Solvent Vapor Annealing

The extension of a series of dithienopyrrole containing A‐D‐A oligothiophenes for application in solution‐processed bulk heterojunction solar cells is described. Using solvent vapor annealing, power conversion efficiencies up to 6.1% are obtained. Exposure of the photoactive layer to chloroform vapor results in increased absorption and ordering of the donor:acceptor blend, as is evident from UV‐vis absorption spectroscopy, X‐ray diffraction (XRD) spectroscopy, and atomic force microscopy (AFM). The type and position of the solubilizing alkyl chains influences the dissolution, optical, and packing properties of the oligomers. However, despite subtle differences in molecular structure, all electron donors could be implemented in solar cells demonstrating power conversion efficiencies between 4.4 and 6.1%. Upon further optimization of these in‐air, processed devices, it is expected that additional improvements in photovoltaic performance can be achieved.     

Enhanced Photovoltaic Performance of Amorphous Donor–Acceptor Copolymers Based on Fluorine‐Substituted Benzodioxocyclohexene‐Annelated Thiophene

Donor–acceptor (D‐A) type π‐conjugated copolymers with crystalline behavior have been extensively investigated as donor semiconductors in organic photovoltaics (OPVs). On the other hand, the development of high‐performance amorphous donor materials is still behind. The amorphous donor copolymer DTS‐C₀(F₂) consisting of dithieno[3,2‐b:2′,3′‐d]silole ( DTS ) donor unit and the recently developed fluorine‐substituted naphtho[2,3‐c]thiophene‐4,9‐dione ( C₀(F₂) ) acceptor unit shows moderate photovoltaic performance upon blending with PC₇₁BM. In this work, to enhance the hole‐transporting characteristics, a 3‐hexylthiophene ( HT ) spacer unit is integrated into the conjugated backbone, resulting in a new amorphous copolymer DTS‐HT‐C₀(F₂) . The strong electron‐accepting nature of C₀(F₂) allows the introduction of the HT spacer without affecting the frontier orbital energies and thus the D‐A character. Without using solvent additives and thermal annealing, OPVs based on DTS‐HT‐C₀(F₂) and [6,6]‐phenyl‐C71‐butyric acid methyl ester PC₇₁BM show an improved power conversion efficiency of 9.12%. Investigation of the device physics unambiguously reveals that the hole mobility of the copolymer in the blend is increased by an order of magnitude by the introduction of HT , while keeping an amorphous film nature, leading to higher short‐circuit current density and fill factor. These results demonstrate the realization of high‐performance OPVs based on amorphous active layers.     

Three‐Dimensional Nanostructured Indium‐Tin‐Oxide Electrodes for Enhanced Performance of Bulk Heterojunction Organic Solar Cells

A three‐dimensional indium tin oxide (ITO) nanohelix (NH) array is presented as a multifunctional electrode for bulk heterojunction organic solar cells for simultaneously improving light absorption and charge transport from the active region to the anode. It is shown that the ITO NH array, which is easily fabricated using an oblique‐angle‐deposition technique, acts as an effective antireflection coating as well as a light‐scattering layer, resulting in much enhanced light harvesting. Furthermore, the larger interfacial area between the electrode and the active layer, together with the enhanced carrier mobility through highly conductive ITO NH facilitate transport and collection of charge carriers. The optical and electrical improvements enabled by the ITO NH electrode result in a 10% increase in short‐circuit current density and power‐conversion efficiency of the solar cells.     

Simple,Highly Efficient Vacuum‐Processed Bulk Heterojunction Solar Cells Based on Merocyanine Dyes

In order to be competitive on the energy market, organic solar cells with higher efficiency are needed. To date, polymer solar cells have retained the lead with efficiencies of up to 8%. However, research on small molecule solar cells has been catching up throughout recent years and is showing similar efficiencies, however, only for more sophisticated multilayer device configurations. In this work, a simple, highly efficient, vacuum‐processed small molecule solar cell based on merocyanine dyes – traditional colorants that can easily be mass‐produced and purified – is presented. In the past, merocyanines have been successfully introduced in solution‐processed as well as vacuum‐processed devices, demonstrating efficiencies up to 4.9%. Here, further optimization of devices is achieved while keeping the same simple layer stack, ultimately leading to efficiencies beyond the 6% mark. In addition, physical properties such as the charge carrier transport and the cell performance under various light intensities are addressed.     

Ternary Blended Fullerene‐Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher‐LUMO‐Level Acceptor to Improve Film Morphology

Ternary approaches to solar cell design utilizing a small bandgap nonfullerene acceptor as the near infrared absorber to increase the short‐circuit current density always decreases the open‐circuit voltage. Herein, a highly efficient polymer solar cell with an impressive efficiency of 16.28 ± 0.20% enabled by an effective voltage‐increased ternary blended fullerene‐free material approach is reported. In this approach, the structural similarity between the host and the higher‐LUMO‐level guest enables the two acceptors to be synergized, obtaining increased open‐circuit voltage and fill factor and a small increase of short‐circuit current density. The same beneficial effects are demonstrated by using two host binary systems. The homogeneous fine film morphologies and the π–π stacking patterns of the host blend are well maintained, while larger donor and acceptor phases and increased lamellar crystallinity, increased charge mobilities, and reduced monomolecular recombination can be achieved upon addition of the guest nonfullerene acceptor. The increased charge mobilities and reduced monomolecular recombination not only contribute to the improved fill factor but also enable the best devices to be fabricated with a relatively thicker ternary blended active layer (110 vs 100 nm). This, combined with the absorption from the added guest acceptor, contribute to the increased short‐circuit current.