Reactivities of Various Mediators and Laccases with Kraft Pulp and Lignin Model Compounds

Laccase-catalyzed oxygen delignification of kraft pulp offers some potential as a replacement for conventional chemical bleaching and has the advantage of requiring much lower pressure and temperature. However, chemical mediators are required for effective delignification by laccase, and their price is currently too high at the dosages required. To date, most studies have employed laccase from Trametes versicolor. We have found significant differences in reactivity between laccases from different fungi when they are tested for pulp delignification in the presence of the mediators 2,2(prm1)-azinobis(3-ethylbenzthiazoline-6-sulfonate) (ABTS) and 1-hydroxybenzotriazole (HBT). A more detailed study of T. versicolor laccase with ABTS and HBT showed that HBT gave the most extensive delignification over 2 h but deactivated the enzyme, and therefore a higher enzyme dosage was required. Other mediators, including 1-nitroso-2-naphthol-3,6-disulfonic acid, 4-hydroxy-3-nitroso-1-naphthalenesulfonic acid, promazine, chlorpromazine, and Remazol brilliant blue, were also tested for their ability to delignify kraft pulp. Studies with dimeric model compounds indicated that the mechanisms of oxidation by ABTS and HBT are different. In addition, oxygen uptake by laccase is much slower with HBT than with ABTS. It is proposed that the dication of ABTS and the 1-oxide radical of HBT, with redox potentials in the 0.8- to 0.9-V range, are required for pulp delignification.     

Laccase-initiated cross-linking of lignocellulose fibres using a ultra-filtered lignin isolated from kraft black liquor

In this work, the effect of Trametes pubescens laccase (TpL) used in combination with a low-molecular-weight ultra-filtered lignin (UFL) to improve mechanical properties of kraft liner pulp and chemi-thermo-mechanical pulp was studied. UFL was isolated by ultra-filtration from the kraft cooking black liquor obtained from softwood pulping. This by-product from the pulp industry contains an oligomeric lignin with almost twice the amount of free phenolic moieties than residual kraft pulp lignin. The reactivity of TpL on UFL and kraft pulp was studied by nuclear magnetic resonance spectroscopy and size exclusion chromatography. Laccase was shown to polymerise UFL and residual kraft pulp lignin in the fibres, seen by the increase in their average molecular weight and in the case of UFL as a decrease in the amount of phenolic hydroxyls. The laccase initiated cross-linking of lignin, mediated by UFL, which gives rise to more than a twofold increase in wet strength of kraft liner pulp handsheets without loosing other critical mechanical properties. Hence, this could be an interesting path to decrease mechano-sorptive creep that has been reported to lessen in extent as wet strength is given to papers. The laccase/2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) mediator system showed a greater increase in wet tensile strength of the resulting pulp sheets than the laccase/UFL system. However, other mechanical properties such as dry tensile strength, compression strength and Scott Bond internal strength were negatively affected by the laccase/ABTS system.     

Demethylation and delignification of kraft pulp by Trametes versicolor laccase in the presence of 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate)

Summary Bleaching of hardwood kraft pulp by Trametes versicolor was accompanied by release and accumulation of methanol, which was produced by demethylation of the pulp. A partial demethylation of the pulp was observed with isolated laccase I from T. versicolor. The extent of demethylation by laccase was increased to the level released by the fungus by addition of 2,2-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS). Methanol release by the laccase/ABTS combination was followed by slower kappa reduction. Both methanol release and kappa reduction were dependent on laccase and ABTS concentrations. The fungus did not produce a stable equivalent of ABTS during bleaching, because extracellular culture fluid from bleaching cultures gave only the same methanol release from pulp as laccase I. Pulp viscosity, an indicator of cellulose chain length, was decreased only slightly by laccase. Thus the enzyme in the presence of ABTS, unlike the fungus, specifically attacks lignin.Offprint requests to: R. Bourbonnais     

Biobleaching of wheat straw-rich soda pulp with alkalophilic laccase from gamma-proteobacterium JB: optimization of process parameters using response surface methodology

An alkalophilic laccase from gamma-proteobacterium JB was applied to wheat straw-rich soda pulp to check its bleaching potential by using response surface methodology based on central composite design. The design was employed by selecting laccase units, ABTS (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid)) concentration and pH as model factors. The results of second order factorial design experiments showed that all three independent variables had significant effect on brightness and kappa number of laccase-treated pulp. Optimum conditions for biobleaching of pulp with laccase preparation (specific activity, 65 nkat mg(-1) protein) were 20 nkat g(-1) of pulp, 2mM ABTS and pH 8.0 which enhanced brightness by 5.89% and reduced kappa number by 21.1% within 4h of incubation at 55 degrees C, without further alkaline extraction of pulp. Tear index (8%) and burst index (18%) also improved for laccase-treated pulp as compared to control raw pulp. Treatment of chemically (CEH1H2) bleached pulp with laccase showed significant effect on release of chromophores, hydrophobic and reducing compounds. Laccase-prebleaching of raw pulp reduced the use of hypochlorite by 10% to achieve brightness of resultant hand sheets similar to the fully chemically bleached pulp.     

Antioxidant activity: what do we measure?

Inhibition of oxidation of 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) by free radicals generated by decomposition of 2,2'-azobis(2-amidopropane) (ABAP) by antioxidants and biological material was studied. A correlation was found between the ability of various substances to delay the onset of ABTS oxidation and their rapid reduction of the ABTS+* cation radical, and between the ability to reduce the maximal rate of ABTS oxidation and slow reduction of ABTS+*. The length of the lag period of ABTS oxidation was found to be independent of ABTS concentration. Similar decrease of peroxynitrite-induced ABTS+* formation by antioxidants was observed when the antioxidants were added before and after peroxynitrite. All these findings indicate that the main effect of antioxidants in this system is reduction of ABTS+* and not prevention of its formation. Reduction of oxidation products rather than inhibition of their formation may be the predominant mode of action of antioxidants in various assays of antioxidant activity.     

Fiber surface characterization of old newsprint pulp deinked by combining hemicellulase with laccase-mediator system

Deinking of old newsprint (ONP) by combining hemicellulase with laccase-mediator system (LMS) was investigated, and surface chemical composition and fiber morphology changes during the deinking process were studied by electron spectroscopy for chemical analysis (ESCA), contact angle (CA), attenuated total reflectance fourier transform infrared spectrometry (ATR-FTIR), fiber quality analyzer (FQA), and environmental scanning electronic microscopy (ESEM). Results showed that, compared to the pulp deinked with hemicellulase or LMS individually, effective residual ink concentration (ERIC) was lower for the hemicellulase/LMS-deinked pulp. This indicated that there is a synergistic deinking effect between hemicellulase and LMS. It was found that O/C ratio of the fiber surface increased and the surface coverage of lignin decreased during the hemicellulase/LMS deinking process. The contact angle of the hemicellulase/LMS-deinked pulp was lower than that of pulps deinked with each individual enzyme. ESEM observations showed that more fibrils appeared on the fiber surface due to synergistic treatment.     

Identification of Proanthocyanidins from Litchi (Litchi chinensis Sonn.) Pulp by LC-ESI-Q-TOF-MS and Their Antioxidant Activity

Content of total proanthocyanidins as well as total phenolics, flavonoids, antioxidant activities were evaluated for litchi (Litchi chinensis Sonn.) pulp of 32 cultivars. One cultivar, Hemaoli, showed the highest total proanthocyanidins and total phenolics, and DPPH or ABTS radical scavenging activities. ESI-MS and NMR analysis of the Hemaoli pulp crude extracts (HPCE) showed that procyandins composed of (epi)catechin unites with degree of polymerization (DP) of 2–6 were dominant proanthocyanidins in HPCE. After the HPCE was fractionated by a Sephadex LH-20 column, 32 procyanidins were identified by LC-ESI-Q-TOF-MS in litchi pulp for the first time. Quantification of individual procyanidin in HPCE indicated that epicatechin, procyanidin B2, procyanidin C1 and A-type procyanidin trimer were the main procyanidins. The radical scavenging activities of different fractions of HPCE as well as six procyanidins standards were evaluated by both DPPH and ABTS assays. HPCE fractions showed similar antioxidant activities with those of Vc and six individual procyanidins, the IC₅₀ of which ranged from 1.88 ± 0.01 to 2.82 ± 0.10 μg/ml for DPPH assay, and from 1.52 ± 0.17 to 2.71 ± 0.15 μg/ml for ABTS assay. Such results indicate that litchi cultivars rich in proanthocyanidins are good resources of dietary antioxidants and have the potential to contribute to human health.     

香蕉果实后熟过程中果肉软化差异的研究

对香蕉果实贮藏过程中内、外果肉相关生理生化指标及细胞结构的变化进行系统的观察分析,结果显示:(1)在贮藏初期香蕉果实内果肉的硬度小于外果肉,在贮藏过程中的同一时期,均表现出内果肉硬度小于外果肉,且内果肉硬度较外果肉先降到零;(2)在贮藏初期内果肉中多聚乳糖醛酸酶(PG)和淀粉酶的活性均高于外果肉,随着贮藏时间的延长,酶活性在内、外果肉均表现出不断增加,且这两种酶活性在内果肉中早于外果肉达到最高值,但其在内果肉中的最高值均略低于外果肉的最高值;而淀粉含量却相反,在贮藏初期内果肉中淀粉含量低于外果肉,且在贮藏过程中的降解速率高于外果肉;(3)超微结构显示,香蕉果实内果肉中淀粉粒和细胞壁结构的降解均早于外果肉.研究表明,香蕉果实的软化首先由内果肉细胞降解开始,并呈放射状向外逐步延伸.     

Laboratory evolution of laccase for substrate specificity

A laccase, CotA, from Bacillus subtilis was engineered using a combination of rational and directed evolution approaches. CotA is a generalist, an enzyme with broad specificity, and it was optimized to be a specialist, an enzyme with narrowed specificity. Wild-type CotA oxidizes ABTS (ABTS = diammonium 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) and SGZ (SGZ = 4-hydroxy-3,5-dimethoxy-benzaldehyde azine), and it was engineered for increased specificity for ABTS. Based on the ABTS-bound crystal structure of CotA, 19 amino acids are within 6 Å of ABTS, and they were simultaneously randomized. A mutant was identified that was 132 times more specific for ABTS. Unexpectedly, the variant was found to acquire enhanced thermal stability. The half-life for the heat inactivation (t_1/2) at 80 °C was increased by 62 min for the mutant. Laccases have several applications in biotechnology, which include pulp bleaching, biosensors, bioremediation, and biofuel cells. The substrate specificity of CotA is moldable and the enzyme can be tailored to oxidize a variety of target molecules for specific purposes.     

Enzymatic Biobleaching of Two Recalcitrant Paper Dyes with Horseradish and Soybean Peroxidase

A stilbene dye (Direct Yellow 11) and a methine dye, Basazol 46L, recalcitrant to common chemical bleaches, were treated with horseradish and soybean peroxidases. Both enzymes were effective at chromophore removal. When compared to laccase in combination with a mediator (ABTS), soybean peroxidase was more effective at oxidative dye removal, especially for the methine dye.     

Biobleaching of wheat straw pulp with recombinant laccase from the hyperthermophilic <Emphasis Type="Italic">Thermus thermophilus</Emphasis>

The recombinant laccase from Thermus thermophilus was applied to the biobleaching of wheat straw pulp. The best bleaching effect was when the pulp was treated with 3 U laccase g⁻¹ dry pulp at 90°C, pH 4.5, 8% consistency for 1.5 h. Under these conditions, the pulp brightness was increased by 3.3% ISO, and the pulp kappa number was decreased by 5.6 U. Enzymatic treatment improved the bleachability of wheat straw pulp but caused no damage to the pulp fibers. The use of enzyme-treated pulp saved 25% H₂O₂ consumption in subsequent peroxide bleaching without decreasing the final brightness. Pulp biobleaching in the presence of 5 mM ABTS further increased the pulp brightness by 1.5% ISO. This is the first report on the application of laccase from T. thermophilus in the pulp and paper sector.     

Variations of Flavonoid Composition and Antioxidant Properties among Different Cultivars,Fruit Tissues and Developmental Stages of Citrus Fruits

A large number of biologically active compounds are present in ripe citrus fruits. However, few studies have been focused on the changes in flavonoids and the evolution of antioxidant activity during citrus fruit growth. In this study, fruits of five citrus cultivars cultivated in China were sampled at 60–210 days post‐anthesis (DPA) at intervals of 30 days. The amounts of main flavonoids in the peel and pulp were analyzed by HPLC and their activities were studied by DPPH, ABTS and FRAP. The results showed that the contents of hesperidin, diosmin, eriodictyol, rutin and nobiletin increased before 90 DPA and then decreased with the growth and development of fruits, but an opposite tendency was observed for naringin and narirutin. The antioxidant activities in citrus peel and pulp were found to be significantly correlated with some flavonoids. The results may be of guiding values in citrus production and utilization of citrus fruit by‐products.     

Selective ABTS radical-scavenging activity of prenylated flavonoids from Cudrania tricuspidata

The antioxidative properties of five prenylated flavonoids, including new flavanone (2), from the root bark of Cudrania tricuspidata were examined against the ABTS, DPPH, and hydroxyl radicals. In most of the assays to determine their antioxidative properties, the ABTS activity was strongly correlated with DPPH because both methods are responsible for the same chemical property of hydrogen- or electron-donation to the antioxidant. On the other hand, the prenylated flavonoids (1-5) acted differently with both methods; namely, all the prenylated flavonoids strongly scavenged the ABTS radical (IC(50) < 10 microM), while they were inactive against the DPPH radical (IC(50) > 300 microM). Even though isolated 5,7,2',4',-tetrahydroxy-6,5'-diprenylflavanone (3) showed weak reducing power (746 mV) by cyclic voltammetry when compared to quercetin (394 mV), both had similar ABTS activity (IC(50) < 5 microM).     

Dependence of the genotypic characteristics of Acidithiobacillus ferrooxidans on the physical, chemical, and electrophysical properties of pyrites

Comparison of Acidithiobacillus ferrooxidans strains TFV-1 and TFBk with respect to their capacity to oxidize pyrite 1, with hole-type (p-type) conductivity, or pyrite 2, with an electron-type (n-type) conductivity, showed that, at a pulp density of 1%, both before and after its adaptation to the pyrites, strain TFBk, isolated from a substrate with a more complex mineral composition, grew faster and oxidized the pyrites of both conductivity types more efficiently than strain TFV-1, which was isolated from a mineralogically simple ore. At a pulp density of 3-5%, the oxidation of pyrite 1 by strain TFV-1 and both of the pyrites by strain TFBk began only after an artificial increase in Eh to 600 mV. If the pulp density was increased gradually, strain TFBk could oxidize the pyrites at its higher values than strain TFV-1, with the rate of pyrite 2 oxidation being higher than that of pyrite 1. During chemical oxidation of both of the pyrites, an increase was observed in the absolute values of the coefficients of thermoelectromotive force (KTEMF); during bacterial-chemical oxidation, the KTEMF of pyrite 1 changed insignificantly, whereas the KTEMF of pyrite 2 decreased.     

Bio-refinery system of DME or CH4 production from black liquor gasification in pulp mills

There is great interest in developing black liquor gasification technology over recent years for efficient recovery of bio-based residues in chemical pulp mills. Two potential technologies of producing dimethyl ether (DME) and methane (CH₄) as alternative fuels from black liquor gasification integrated with the pulp mill have been studied and compared in this paper. System performance is evaluated based on: (i) comparison with the reference pulp mill, (ii) fuel to product efficiency (FTPE) and (iii) biofuel production potential (BPP). The comparison with the reference mill shows that black liquor to biofuel route will add a highly significant new revenue stream to the pulp industry. The results indicate a large potential of DME and CH₄ production globally in terms of black liquor availability. BPP and FTPE of CH₄ production is higher than DME due to more optimized integration with the pulping process and elimination of evaporation unit in the pulp mill.     

Comparing the efficiency of the laccase–NHA and laccase–HBT systems in eucalyptus pulp bleaching

Laccase–mediator systems have the disadvantage that the mediator is expensive and potentially toxic. In this work, we used N-hydroxyacetanilide (NHA) in combination with laccase for the first time to bleach eucalypt pulp and found it to be a very promising, advantageous alternative to 1-hydroxybenzotriazole (HBT) as mediator. Thus, NHA is efficiently oxidized by laccase to a radical that absorbs light at 350 nm. Also, NHA is a better substrate for laccase than is HBT. An innovative result is that the enzyme is inactivated to a similar extent by both mediators under the typical treatment conditions of the bleaching step (L). This adverse effect, however, is strongly reduced in the presence of pulp. Moreover, the laccase–NHA system is as efficient as the laccase–HBT system in reducing the kappa number of eucalyptus pulp. Using a xylanase pretreatment or unbleached pulp boosts kappa number reduction and bleaching with the laccase–mediator system. Based on the results of cyclic voltammetry tests, NHA has a slightly lower redox potential than HBT, which further supports use of the former; also, unlike HBT, NHA is oxidized in a reversible, pH-dependent manner. Interestingly, the laccase–NHA system provides more efficient bleaching of eucalyptus pulp at pH 5 than it does at pH 4.     

Synergistic effect of laccase mediators on pentachlorophenol removal by Ganoderma lucidum laccase

Laccases have low redox potentials limiting their environmental and industrial applications. The use of laccase mediators has proven to be an effective approach for overcoming the low redox potentials. However, knowledge about the role played by the mediator cocktails in such a laccase-mediator system (LMS) is scarce. Here, we assembled different dual-agent mediator cocktails containing 2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulfonate) (ABTS), vanillin, and/or acetovanillone, and compared their mediating capabilities with those of each individual mediator alone in oxidation of pentachlorophenol (PCP) by Ganoderma lucidum laccase. Cocktails containing ABTS and either vanillin or acetovanillone strongly promoted PCP removal compared to the use of each mediator alone. The removal enhancement was correlated with mediator molar ratios of the cocktails and incubation times. Analysis of the kinetic constants for each mediator compound showed that G. lucidum laccase was very prone to react with ABTS rather than vanillin and acetovanillone in the cocktails. Moreover, the presence of the ABTS radical (ABTS^+•) and vanillin or acetovanillone significantly enhanced PCP removal concomitant with electron transfer from vanillin or acetovanillone to ABTS^+•. These results strongly suggest that vanillin and acetovanillone mediate the reaction between ABTS and PCP via multiple sequential electron transfers among laccase and its mediators.     

Dependence of chemical and crystalline structure of alkali sulfite pulp on cooking temperature and time

This study investigates the change in chemical and crystalline structure of pulp samples during alkali sulfite process at different cooking temperatures and time, TAPPI and SCAN standard test methods and X-ray diffraction and FT-IR spectroscopy were used. It was shown that the crystalline structure of cellulose in hemp (Cannabis sativa L.) bast fibers was very strong and stable. Crystallinity of alkali sulfite pulp samples obtained from processing at 140 up to 180 °C increased, but then decreased at 200 °C. The crystallite size of cellulose in alkali sulfite pulp samples increased with cooking temperature. The crystalline allomorph of cellulose in alkali sulfite pulp samples obtained at 200 °C changed from monoclinic structure to triclinic structure. Crystalline structure of cellulose in alkali sulfite pulp samples was little affected by changing cooking time. It was concluded that cooking temperature during alkaline sulfite pulping process had more effect on carbohydrate components and crystalline structure of pulp samples than cooking time.     

菊芋粕菊粉的酶法提取、组成及抗氧化活性研究

本研究拟应用酶法提取技术解决菊芋菊粉工业化生产中的废弃物——菊芋粕再利用程度低的问题,并评价菊芋粕菊粉的抗氧化活性功效。对菊芋粕菊粉的果胶酶酶法提取的最佳条件通过响应面法进行了优化,并对菊芋初次水提菊粉(primary water-extracted inulin,PWI)和二次酶提菊粉(secondary enzymatic-extracted inulin,SEI)的组成成分和抗氧化活性进行了比较分析。响应面法优化确定的菊芋粕菊粉最佳酶法提取条件为:pH4.5、提取温度50 ℃、酶底比7.5 U/g、提取时间2 h,该提取方法所得菊芋粕菊粉的得率为35.30%±0.85%,与传统热水浸提法相比菊粉得率提高38.16%。组成分析结果显示,SEI的总糖和菊粉含量均显著高于PWI( P <0.05)。在菊粉聚合度方面,PWI中蔗果三糖和蔗果四糖含量较高,而SEI中蔗果五糖、蔗果六糖及其以上聚合度菊粉的含量较高。此外,SEI的抗氧化活性优于PWI。因此,果胶酶辅助提取方法有望为菊芋粕菊粉的再利用难题提供新的解决思路。     

一色齿毛菌漆酶的酶学特性及染料脱色研究

染料由于具有复杂的化学结构通常难以降解。本文从白腐菌一色齿毛菌LS0547中纯化出胞外漆酶并用于染料脱色实验。SDS-PAGE结果显示纯化的漆酶分子量大小为63.7kDa。漆酶氧化底物ABTS的最适pH为2.2,最适温度为50℃。叠氮钠可强烈抑制漆酶活性,半胱氨酸和二硫苏糖醇可部分抑制漆酶活性。漆酶氧化ABTS,丁香醛连氮和2,6-二甲氧基苯酚的米氏常数分别为0.217,0.306和0.199mmol/L。粗酶和纯化的漆酶用于不同化学结构的染料的脱色研究,结果表明一色齿毛菌纯化漆酶可快速对RB亮蓝进行脱色,偶氮胭脂红和结晶紫的脱色效果低于RB亮蓝,测试的三种染料均可在没有介体存在的条件下被漆酶脱色,显示出一色齿毛菌漆酶在染料废水处理中的应用前景。