Novel hydrophobic surface binding protein, HsbA, produced by Aspergillus oryzae

Hydrophobic surface binding protein A (HsbA) is a secreted protein (14.5 kDa) isolated from the culture broth of Aspergillus oryzae RIB40 grown in a medium containing polybutylene succinate-co-adipate (PBSA) as a sole carbon source. We purified HsbA from the culture broth and determined its N-terminal amino acid sequence. We found a DNA sequence encoding a protein whose N terminus matched that of purified HsbA in the A. ozyzae genomic sequence. We cloned the hsbA genomic DNA and cDNA from A. oryzae and constructed a recombinant A. oryzae strain highly expressing hsbA. Orthologues of HsbA were present in animal pathogenic and entomopathogenic fungi. Heterologously synthesized HsbA was purified and biochemically characterized. Although the HsbA amino acid sequence suggests that HsbA may be hydrophilic, HsbA adsorbed to hydrophobic PBSA surfaces in the presence of NaCl or CaCl(2). When HsbA was adsorbed on the hydrophobic PBSA surfaces, it promoted PBSA degradation via the CutL1 polyesterase. CutL1 interacts directly with HsbA attached to the hydrophobic QCM electrode surface. These results suggest that when HsbA is adsorbed onto the PBSA surface, it recruits CutL1, and that when CutL1 is accumulated on the PBSA surface, it stimulates PBSA degradation. We previously reported that when the A. oryzae hydrophobin RolA is bound to PBSA surfaces, it too specifically recruits CutL1. Since HsbA is not a hydrophobin, A. oryzae may use several types of proteins to recruit lytic enzymes to the surface of hydrophobic solid materials and promote their degradation.     

Novel Hydrophobic Surface Binding Protein, HsbA, Produced by Aspergillus oryzae

Hydrophobic surface binding protein A (HsbA) is a secreted protein (14.5 kDa) isolated from the culture broth of Aspergillus oryzae RIB40 grown in a medium containing polybutylene succinate-co-adipate (PBSA) as a sole carbon source. We purified HsbA from the culture broth and determined its N-terminal amino acid sequence. We found a DNA sequence encoding a protein whose N terminus matched that of purified HsbA in the A. ozyzae genomic sequence. We cloned the hsbA genomic DNA and cDNA from A. oryzae and constructed a recombinant A. oryzae strain highly expressing hsbA. Orthologues of HsbA were present in animal pathogenic and entomopathogenic fungi. Heterologously synthesized HsbA was purified and biochemically characterized. Although the HsbA amino acid sequence suggests that HsbA may be hydrophilic, HsbA adsorbed to hydrophobic PBSA surfaces in the presence of NaCl or CaCl₂. When HsbA was adsorbed on the hydrophobic PBSA surfaces, it promoted PBSA degradation via the CutL1 polyesterase. CutL1 interacts directly with HsbA attached to the hydrophobic QCM electrode surface. These results suggest that when HsbA is adsorbed onto the PBSA surface, it recruits CutL1, and that when CutL1 is accumulated on the PBSA surface, it stimulates PBSA degradation. We previously reported that when the A. oryzae hydrophobin RolA is bound to PBSA surfaces, it too specifically recruits CutL1. Since HsbA is not a hydrophobin, A. oryzae may use several types of proteins to recruit lytic enzymes to the surface of hydrophobic solid materials and promote their degradation.     

Analysis of the ionic interaction between the hydrophobin RodA and two cutinases of Aspergillus nidulans obtained via an Aspergillus oryzae expression system

Hydrophobins are amphipathic secretory proteins with eight conserved cysteine residues and are ubiquitous among filamentous fungi. In the fungus Aspergillus oryzae, the hydrophobin RolA and the polyesterase CutL1 are co-expressed when the sole available carbon source is the biodegradable polyester polybutylene succinate-co-adipate (PBSA). RolA promotes the degradation of PBSA by attaching to the particle surface, changing its structure and interacting with CutL1 to concentrate CutL1 on the PBSA surface. We previously reported that positively charged residues in RolA and negatively charged residues in CutL1 are cooperatively involved in the ionic interaction between RolA and CutL1. We also reported that hydrophobin RodA of the model fungus Aspergillus nidulans, which was obtained via an A. oryzae expression system, interacted via ionic interactions with CutL1. In the present study, phylogenetic and alignment analyses revealed that the N-terminal regions of several RolA orthologs contained positively charged residues and that the corresponding negatively charged residues on the surface of CutL1 that were essential for the RolA–CutL1 interaction were highly conserved in several CutL1 orthologs. A PBSA microparticle degradation assay, a pull-down assay using a dispersion of Teflon particles, and a kinetic analysis using a quartz crystal microbalance revealed that recombinant A. nidulans RodA interacted via ionic interactions with two recombinant A. nidulans cutinases. Together, these results imply that ionic interactions between hydrophobins and cutinases may be common among aspergilli and other filamentous fungi.

     

Ionic interaction of positive amino acid residues of fungal hydrophobin RolA with acidic amino acid residues of cutinase CutL1

Hydrophobins are amphipathic proteins secreted by filamentous fungi. When the industrial fungus Aspergillus oryzae is grown in a liquid medium containing the polyester polybutylene succinate co‐adipate (PBSA), it produces RolA, a hydrophobin, and CutL1, a PBSA‐degrading cutinase. Secreted RolA attaches to the surface of the PBSA particles and recruits CutL1, which then condenses on the particles and stimulates the hydrolysis of PBSA. Here, we identified amino acid residues that are required for the RolA–CutL1 interaction by using site‐directed mutagenesis. We quantitatively analyzed kinetic profiles of the interactions between RolA variants and CutL1 variants by using a quartz crystal microbalance (QCM). The QCM analyses revealed that Asp142, Asp171 and Glu31, located on the hydrophilic molecular surface of CutL1, and His32 and Lys34, located in the N‐terminus of RolA, play crucial roles in the RolA–CutL1 interaction via ionic interactions. RolA immobilized on a QCM electrode strongly interacted with CutL1 (K_D = 6.5 nM); however, RolA with CutL1 variants, or RolA variants with CutL1, showed markedly larger K_D values, particularly in the interaction between the double variant RolA‐H32S/K34S and the triple variant CutL1‐E31S/D142S/D171S (K_D = 78.0 nM). We discuss a molecular prototype model of hydrophobin‐based enzyme recruitment at the solid–water interface.     

Asp30 of Aspergillus oryzae cutinase CutL1 is involved in the ionic interaction with fungal hydrophobin RolA

Aspergillus oryzae hydrophobin RolA adheres to the biodegradable polyester polybutylene succinate-co-adipate (PBSA) and promotes PBSA degradation by interacting with A. oryzae polyesterase CutL1 and recruiting it to the PBSA surface. In our previous studies, we found that positively charged amino acid residues (H32, K34) of RolA and negatively charged residues (E31, D142, D171) of CutL1 are important for the cooperative ionic interaction between RolA and CutL1, but some other charged residues in the triple mutant CutL1-E31S/D142S/D171S are also involved. In the present study, on the basis of the 3D-structure of CutL1, we hypothesized that D30 is also involved in the CutL1–RolA interaction. We substituted D30 with serine and performed kinetic analysis of the interaction between wild-type RolA and the single mutant CutL1-D30S or quadruple mutant CutL1-D30S/E31S/D142S/D171S by using quartz crystal microbalance. Our results indicate that D30 is a novel residue involved in the ionic interaction between RolA and CutL1.     

Involvement of hydrophobic amino acid residues in C7–C8 loop of Aspergillus oryzae hydrophobin RolA in hydrophobic interaction between RolA and a polyester

Hydrophobins are amphipathic secretory proteins with eight conserved cysteine residues and are ubiquitous among filamentous fungi. The Cys3–Cys4 and Cys7–Cys8 loops of hydrophobins are thought to form hydrophobic segments involved in adsorption of hydrophobins on hydrophobic surfaces. When the fungus Aspergillus oryzae is grown in a liquid medium containing the polyester polybutylene succinate-co-adipate (PBSA), A. oryzae produces hydrophobin RolA, which attaches to PBSA. Here, we analyzed the kinetics of RolA adsorption on PBSA by using a PBSA pull-down assay and a quartz crystal microbalance (QCM) with PBSA-coated electrodes. We constructed RolA mutants in which hydrophobic amino acids in the two loops were replaced with serine, and we examined the kinetics of mutant adsorption on PBSA. QCM analysis revealed that mutants with replacements in the Cys7–Cys8 loop had lower affinity than wild-type RolA for PBSA, suggesting that this loop is involved in RolA adsorption on PBSA.     

Fungal contribution to in situ biodegradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) film in soil

The contribution of fungi to the microbial degradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films in soil was studied. Various traces, cavities, and grooves observed on the dented surface of PHBV films demonstrated that the degradation was a concerted effect of a microbial consortium colonizing the film surface, including fungi, bacteria, and actinomycetes. The succession of microbial consortia in the soil around the PHBV films during the degradation showed a distinctive increase in the fungal population, resulting in its dominance. Comparison of the degradation ability of microbial strains isolated from soil where PHBV films were degraded, revealed that fungi showed the highest contribution to PHBV degradation, growing very rapidly along the film surface with their high degradation ability and then expanding their hyphae in a three-dimensional manner.     

Drastically lowered protein adsorption on microbicidal hydrophobic/hydrophilic polyelectrolyte multilayers

Polyelectrolyte multilayer films assembled from a hydrophobic N-alkylated polyethylenimine and a hydrophilic polyacrylate were discovered to exhibit strong antifouling, as well as antimicrobial, activities. Surfaces coated with these layer-by-layer (LbL) films, which range from 6 to 10 bilayers (up to 45 nm in thickness), adsorbed up to 20 times less protein from blood plasma than the uncoated controls. The dependence of the antifouling activity on the nature of the polycation, as well as on assembly conditions and the number of layers in the LbL films, was investigated. Changing the hydrophobicity of the polycation altered the surface composition and the resistance to protein adsorption of the LbL films. Importantly, this resistance was greater for coated surfaces with the polyanion on top; for these films, the average zeta potential pointed to a near neutral surface charge, thus, presumably minimizing their electrostatic interactions with the protein. The film surface exhibited a large contact angle hysteresis, indicating a heterogeneous topology likely due to the existence of hydrophobic-hydrophilic regions on the surface. Scanning electron micrographs of the film surface revealed the existence of nanoscale domains. We hypothesize that the existence of hydrophobic/hydrophilic nanodomains, as well as surface charge neutrality, contributes to the LbL film's resistance to protein adsorption.     

Kinetics of wheat germ lipoxygenase adsorbed to hydrophobic surfaces

Lipoxygenase binds to Teflon or epoxy coated surfaces, presumably through a hydrophobic interaction. The kinetics of bound enzyme differ from the kinetics of free enzyme both in the effect of substrate concentration on velocity and in the dependence of the induction time on substrate concentration. The binding site for the product hydroperoxide appears to be masked when the enzyme is bound to hydrophobic surfaces. In vivo kinetic behavior of the enzyme may be more closely approximated by that of adsorbed enzyme than by free enzyme.     

Interfacial self-assembly of a hydrophobin into an amphipathic protein membrane mediates fungal attachment to hydrophobic surfaces.

The SC3p hydrophobin of Schizophyllum commune is a small hydrophobic protein (100-101 amino acids with eight cysteine residues) that self-assembles at a water/air interface and coats aerial hyphae with an SDS-insoluble protein membrane, at the outer side highly hydrophobic and with a typical rodlet pattern. SC3p monomers in water also self-assemble at the interfaces between water and oils or hydrophobic solids. These materials are then coated with a 10 nm thick SDS-insoluble assemblage of SC3p making their surfaces hydrophilic. Hyphae of S. commune growing on a Teflon surface became firmly attached and SC3p was shown to be present between the fungal cell wall and the Teflon. Decreased attachment of hyphae to Teflon was observed in strains not expressing SC3, i.e. a strain containing a targeted mutation in this gene and a regulatory mutant thn. These findings indicate that hydrophobins, in addition to forming hydrophobic wall coatings, play a role in adherence of fungal hyphae to hydrophobic surfaces.     

Adsorption of zein on surfaces with controlled wettability and thermal stability of adsorbed zein films

Adsorption characteristics of zein protein on hydrophobic and hydrophilic surfaces have been investigated to understand the orientation changes associated with the protein structure on a surface. The protein is adsorbed by a self-assembly procedure on a monolayer-modified gold surface. It is observed that zein shows higher affinity toward hydrophilic than hydrophobic surfaces on the basis of the initial adsorption rate followed by quartz crystal microbalance studies. Reflection absorption infrared (RAIR) spectroscopic studies reveal the orientation changes associated with the adsorbed zein films. Upon adsorption, the protein is found to be denatured and the transformation of alpha-helix to beta-sheet form is inferred. This transformation is pronounced when the protein is adsorbed on hydrophobic surfaces as compared to hydrophilic surfaces. Electrochemical techniques (cyclic voltammetry and impedance techniques) are very useful in assessing the permeability of zein film. It is observed that the zein moieties adsorbed on hydrophilic surfaces are highly impermeable in nature and act as a barrier for small molecules. The topographical features of the deposits before and after adsorption are analyzed by atomic force microscopy. The protein adsorbed on hydrophilic surface shows rod- and disclike features that are likely to be the base units for the growth of cylindrical structures of zein. The thermal stability of the adsorbed zein film has been followed by variable-temperature RAIR measurements.     

Hydrophobins: New prospects for biotechnology

Hydrophobins are small amphipathic molecules found uniquely in fungi. They perform crucial roles in allowing filamentous species to break through interfaces during aerial hyphae formation, sporulation, fruit body production and cell penetration. Initial biotechnological applications have exploited materials coated with hydrophobins to switch hydrophobic surfaces to hydrophilic and vice versa. Recent improvements in our understanding of the biophysics of hydrophobin layer formation, including the use of mixed types of molecules, together with advances in genomics promise to extend greatly the potential for hydrophobin biotechnologies.     

Possible involvement of pleiomorphic vacuolar networks in nutrient recycling in filamentous fungi

Morphological analyses of vacuoles in filamentous fungi in the past decade have led to the remarkable finding that they are highly pleiomorphic organelles. Among them, tubular vacuoles have been implicated in nutrient transport between hyphal tips and the host plant surface in mycorrhizal fungi. However, a series of works suggested the presence of tubular vacuoles in other fungi that are not mycorrhizal, including Aspergillus oryzae, hinting at more general roles of the tubular vacuoles. Recently, we made two key observations by using the fusion protein of enhanced green fluorescent protein (EGFP) with a putative vacuolar t-SNARE in A. oryzae; tubular vacuoles formed more extensively in hyphae that were not in contact with nutrients, and vacuoles that were interconnected by tubules in the mature mycelial region displayed traces of microautophagy-mediated degradation of cytoplasm. The aim of this addendum is to discuss the possible involvement of vacuoles in degrading, transporting, and recycling nutrients from the mature mycelial region to hyphal tips, to support the continuous tip growth.     

Caseinate-Induced Competitive Displacement of Whey Protein from Interfaces

The caseinate-induced competitive displacement of whey protein from planar air-water interfaces was investigated based on atomic force microscopy (AFM) imaging and that from the surfaces of oil droplets immersed in aqueous solution based on AFM force spectroscopy. After the addition of sodium caseinate to the sub-phase, the surface pressure of planar interfacial films of pre-adsorbed whey protein increased from 8 mN/m to up to 21 mN/m. The thicknesses of interfacial films were uniform and remained to be approximately 2 nm at relatively low surface pressures up to 18 mN/m, while they became uneven at higher surface pressures and increased to up to 7.1 nm, presumably due to the compression of interfacial whey protein networks by adsorbed caseinate. The rigidity of oil droplets coated with protein adsorbed to their surfaces was then evaluated based on the slope of approximately linear force-distance curves obtained by pressing an oil droplet against another. The adsorption of whey protein to oil droplet surfaces increased droplets’ rigidity. The subsequent addition of caseinate to the bulk solution surrounding oil droplets coated with pre-adsorbed whey protein further increased droplets’ rigidity. The present results suggest that caseinate adsorbed to an interface to which whey protein had adsorbed in advance did not completely expel pre-adsorbed whey protein molecules into the aqueous phase but caused a compaction of interfacial whey protein networks and thereby strengthened the interfacial film.     

Local delivery of basic fibroblast growth factor (bFGF) using adsorbed silyl-heparin,benzyl-bis(dimethylsilylmethyl)oxycarbamoyl-heparin

A growth factor delivery system was developed that is based on the use of silyl-heparin, a chemically modified analogue of heparin. The silyl-heparin was adsorbed onto surfaces by hydrophobic interaction via the prosthetic unit and can then be used as a solid-phase adsorbent for bFGF. All the coating steps were performed by adsorption, a process that allowed preparation of surfaces by immersion or "dip-coating". In this study a series of silyl-heparins were synthesized and each of the analogues found to function similar to unmodified heparin relative to their binding of antithrombin III and also the binding of bFGF. The silyl-heparins were found to be adsorbed onto a wide variety of substrates including polystyrene and lactide:glycolide copolymer. Enzyme-linked immumosorbant assay (ELISA) was used to establish that bFGF was readily bound to surface adsorbed silyl-heparin, and that the amount bound was directly related to amount offered for binding. Once adsorbed the silyl-heparin/FGF was able to induce capillary tube formation of endothelial cells and to increase the growth of endothelial cells. When coated onto suture material and implanted in muscle, the FGF/silyl-heparin coating caused an increased density of mesenchymal cells in the area of the implant. This coating method could prove to be useful in a number of tissue engineering applications for the local delivery of FGF and other growth factors.     

On the Adsorption of Human Acidic Proline-rich Proteins (PRP-1 and PRP-3) and Statherin at Solid/liquid Interfaces

The objective of the present study was to investigate the adsorption of PRP-1, PRP-3 and statherin to solid surfaces in terms of dependence on concentration, the presence of electrolyte and surface wettability. Time resolved in situ ellipsometry was used to determine the adsorbed amounts and adsorption rates of pure PRP-1, PRP-3 and statherin onto pure (hydrophilic) and methylated (hydrophobized) silica surfaces. The initial film build-up was fast and plateaus were reached within 10 min at all concentrations for both types of surfaces and all proteins. The observed adsorption and calculated diffusion rates of PRP-1, PRP-3 and statherin, respectively, indicated that the initial adsorption was mass transport controlled at low concentrations. At hydrophobic surfaces, isotherm shapes and adsorbed amounts were similar for PRP-1 and PRP-3, while statherin adsorbed to a higher extent. At hydrophilic surfaces only PRP-1 adsorbed substantially, while for PRP-3 and statherin adsorbed amounts were low. The presence of Ca 2+ ions in the phosphate buffer solution increased the adsorption of statherin and PRP-3 on hydrophobic surfaces, while PRP-1 was unaffected. On hydrophilic surfaces, all three proteins adsorbed in higher amounts in NaCl, compared to CaCl 2 at similar ionic strength. It is concluded that acidic PRPs (PRP-1 and PRP-3) and statherin readily form films on a variety of materials and solution conditions, showing that their functions may be fulfilled under a wide range of conditions.     

Nisin-activated hydrophobic and hydrophilic surfaces: assessment of peptide adsorption and antibacterial activity against some food pathogens

An effective antimicrobial packaging or food contact surface should be able to kill or inhibit micro-organisms that cause food-borne illnesses. Setting up such systems, by nisin adsorption on hydrophilic and hydrophobic surfaces, is still a matter of debate. For this purpose, nisin was adsorbed on two types of low-density polyethylene: the hydrophobic native film and the hydrophilic acrylic acid-treated surface. The antibacterial activity was compared for those two films and it was highly dependent on the nature of the surface and the nisin-adsorbed amount. The hydrophilic surfaces presented higher antibacterial activity and higher amount of nisin than the hydrophobic surfaces. The effectiveness of the activated surfaces was assessed against Listeria innocua and the food pathogens Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus. S. aureus was more sensitive than the three other test bacteria toward both nisin-functionalized films. Simulation tests to mimic refrigerated temperature showed that the films were effective at 20 and 4 °C with no significant difference between the two temperatures after 30 min of exposure to culture media.     

Autophagy during conidiation and conidial germination in filamentous fungi

Filamentous fungi form aerial hyphae on solid medium, and some of these differentiate into conidiophores for asexual sporulation (conidiation). In the filamentous deuteromycete, Aspergillus oryzae, aerial hyphae are formed from the foot cells and some differentiate into conidiophores, which are composed of vesicles, phialides and conidia. Recently, we isolated the yeast ATG8 gene homologue Aoatg8 from A. oryzae, and visualized autophagy by the expression of an EGFP (enhanced green fluorescent protein)-AoAtg8 fusion protein and DsRed2 protein in this fungus. Furthermore, by constructing the Aoatg8 deletion and conditional mutants, we demonstrated that autophagy functions during the process of differentiation of aerial hyphae, conidiation and conidial germination in A. oryzae. Here, we discuss the contribution of autophagy towards the differentiation and germination processes in filamentous fungi.     

Molecular orientation of tropoelastin is determined by surface hydrophobicity

Tropoelastin is the precursor of the extracellular protein elastin and is utilized in tissue engineering and implant technology by adapting the interface presented by surface-bound tropoelastin. The preferred orientation of the surface bound protein is relevant to biointerface interactions, as the C-terminus of tropoelastin is known to be a binding target for cells. Using recombinant human tropoelastin we monitored the binding of tropoelastin on hydrophilic silica and on silica made hydrophobic by depositing a self-assembled monolayer of octadecyl trichlorosilane. The layered organization of deposited tropoelastin was probed using neutron and X-ray reflectometry under aqueous and dried conditions. In a wet environment, tropoelastin retained a solution-like structure when adsorbed on silica but adopted a brush-like structure when on hydrophobized silica. The orientation of the surface-bound tropoelastin was investigated using cell binding assays and it was found that the C-terminus of tropoelastin faced the bulk solvent when bound to the hydrophobic surface, but a mixture of orientations was adopted when tropoelastin was bound to the hydrophilic surface. Drying the tropoelastin-coated surfaces irreversibly altered these protein structures for both hydrophilic and hydrophobic surfaces.     

Copolymers including L-histidine and hydrophobic moiety for preparation of nonbiofouling surface

A new type of copolymer composed of l-histidine (ampholyte) and n-butyl methacrylate (hydrophobic moiety) was developed for the preparation of nonbiofouling surfaces. The copolymer adsorbed onto resin surfaces and made the surface very hydrophilic. The hydrophilization effect was higher than that of bovine serum albumin (BSA). When polystyrene surfaces were coated with the copolymer, both the nonspecific adsorption of protein and the adhesion of cells were significantly reduced in comparison with BSA coating. The newly synthesized polymer is a new and useful candidate for the preparation of nonbiofouling surfaces.