An Efficient Protocol for Ulmus minor Mill. Protoplast Isolation and Culture in Agarose Droplets

We describe here an efficient and reproducible protocol for isolation and culture of protoplasts from Ulmus minor. Different sources of donor tissues were tested for protoplast isolation: callus and juvenile leaves from in vitro and greenhouse plants. Several combinations and concentrations of hydrolytic enzymes were used. Comparative tests between Cellulase Onozuka R10 and Cellulase Onozuka RS were made and the last one proved to be more efficient. Both the pectinases used, Macerozyme Onozuka R10 and Pectinase (Sigma^®), were efficient in protoplast isolation and there was no need for a more active pectinase. In vitro leaves proved to be the best source for protoplast isolation and produced an average of 3.96 × 10⁷ protoplasts per gram of fresh weigh. Elm mesophyll protoplasts were cultured using the advantageous method of agarose droplets and a modification of the Kao and Michayluk culture medium, using two plating densities (1 × 10⁵ and 2 × 10⁵ protoplasts ml^?1). Protoplast division and evolution into colonies and microcalli was promoted in the agarose droplets plated at 2 × 10⁵ protoplasts ml^?1. Ten weeks after protoplast culture initiation a plating efficiency of 2.7% was attained and the bigger microcalli, with at least 0.5 mm diameter, were transferred to a solid medium previously used for the production of embryogenic callus.     

Plant regeneration of mesophyll protoplasts from a cytoplasmic albino mutant ofLycopersicon esculentum cv. Large Red Cherry

Mesophyll protoplasts from in vitro grown plants of a cytoplasmic albino mutant ofLycopersicon esculentum cv. Large Red Cherry were isolated with yields between 0.4 to 4.4 × 10⁶ protoplasts per gram leaf tissue. Success in the culture of these protoplasts was dependent on embedding of the protoplasts in 100 µ1 agarose droplets 0.6% (w/v). A plating efficiency of 4.0% was obtained when the protoplasts were cultured in TM-2 medium with sucrose concentrations of 8.7 to 9.6% (w/v) resulting in an osmotic pressure of 432 to 469 mOsmol kg^-1. After 14 days of protoplast culture, microcalli with a diameter of 3 mm were observed. After 3 weeks, macrocalli were obtained which were transferred to regeneration medium. Regeneration of shoot primordia, with a frequency of 19%, was obtained on TM-4 medium supplemented with 1% (w/v) sucrose. The first shoot primordia were visible 10 weeks after protoplast plating. For development of the shoot primordia into shoots it was necessary to increase the sucrose concentration to 6% (w/v). Eight out of eleven regenerants were diploid (2n = 2x = 24); the other three were tetraploid. Efficient regeneration of mesophyll albino protoplasts from tomato opens the way to select at the cellular level for the chloroplast transfers.     

An Improved Protocol for Microcallus Production and Whole Plant Regeneration from Recalcitrant Banana Protoplasts (Musa spp.)

One important limitation for routine production of somatic hybrids in banana (Musa spp.) is the difficulty in protoplast regeneration. To facilitate protoplast regeneration in banana, the crucial step of microcallus production was optimised for the following parameters: nurse culture medium, duration of microcalli on nurse culture, differing nurse cells, and filter composition. A comparative study between two nurse cell media, Ma₂ and PCM, significantly affected the number of microcalli produced, which was 90 × 10³ per Petri dish on Ma₂ with 0.5 μM zeatin and 9.0 μM 2,4 D, and 30 × 10³ per Petri dish on PCM. Moreover, continuous production of microcalli was achieved on Ma₂ and the frequency of embryogenic cell aggregates was higher among microcalli on Ma₂-medium. However, no cell division was observed in protoplasts cultured on Ma₂ in which nurse cells were maintained for 2 weeks suggesting a requirement of effective presence of nurse cells for cell division of banana protoplasts. Use of a filter in conjugation with nurse cells resulted in greater than 7-fold increase in the number of microcalli. Flow cytometry analysis of 124 protoplast-derived plants showed the presence of hexaploid plants (mother plant is triploid) at the frequency of 4%. Together, these data are indicative of the complex factors involved in the regulation of plant cell division and growth. Each individual aspect must be optimised for efficient protocol development.     

Plant regeneration of mulberry (<Emphasis Type="Italic">Morus indica</Emphasis>) from mesophyll-derived protoplasts

A protocol is presented for regenerating plants from protoplasts of tropical mulberry. Leaves from seedling node cultures maintained in vitro were used as donor tissue. Optimal cell wall digestion was achieved with a combination of cellulase (2%) and macerozyme (1%). The plant growth regulator (PGR) combination zeatin (2.3 μM) and 2,4-dichlorophenoxyacetic acid (2,4-D) (2.3 μM) resulted in the highest number (29%) of cell divisions. First cell divisions were observed at day 4 after plating. Only zeatin (2.3 μM) and 2-methoxy-3,6-dichlorobenzoic acid (dicamba) (13.5 μM) supplemented medium supported subsequent divisions in protoplast cultures. Microcolonies reached a cell number of approximately 50, after 40 to 42 days of culture. The cells of these colonies continued dividing, leading to formation of microcalli. Whole plants were obtained after culture of microcalli on Murashige and Skoog (MS) medium containing thidiazuron (TDZ) (4.5 μM) and indole-3-acetic acid (IAA) (17.1 μM). The regenerated shoots were rooted on MS medium supplemented with 4.9 μM indole butyric acid (IBA). With a low survival rate during acclimation, regenerated plants were established in the greenhouse.     

Regeneration of leaf mesophyll protoplasts of tomato cultivars (L. esculentum): factors important for efficient protoplast culture and plant regeneration

Conditions were established for efficient plant regeneration from four freshmarket cultivars of Lycopersicon esculentum. In order to increase the yield of viable protoplasts which are able to sustain cell divisions, the donor plants are preconditioned by incubation at 25°C in the dark for 18 hours, followed by a cold treatment at 4°C in the dark for the last 6 hours, prior to protoplast isolation. Browning of the dividing cell colonies can be prevented by culturing protoplasts in 100 l droplets of low-melting agarose, surrounded by liquid medium. Alternatively, protoplasts can be cultured in liquid medium. In both procedures the plating efficiencies and percentage of shoot regeneration are increased, only when dilutions were performed with auxin-free culture medium. Shoot regeneration is obtained by using a two step procedure: initiation of greening of microcalli on a medium containing 0.2 M mannitol and 7.3 mM sucrose, which is followed by shoot development on a mannitol-free medium containing 0.5 M sucrose. In this way, plants can be regenerated within 3 months from the hybrid cultivars Bellina, Abunda, Sonatine and also from the true seedline Moneymaker. The latter one showed the highest regeneration frequency (30%).Abbreviations BAP 6-Benzylamino purine - 2,4-D 2,4-dichlorophenoxy acetic acid - IAA indole acetic acid - MES 2-(N-morpholino)- ethane sulfonic acid - NAA naphthalene acetic acid - PE plating efficiency     

Microcallus formation from maize protoplasts prepared from embryogenic callus

Conditions have been developed that induce maize (Zea mays L.) protoplasts to re-synthesize cell walls and to initiate cell divisions. Two types of embryogenic maize callus were used as a source of protoplasts: a heterogeneous callus (Type I) derived from immature embryos after three weeks in culture, and a friable, rapidly growing callus (Type II) selected from portions of the Type I callus. Many variables in the growth conditions of the donor tissue (type of medium, transfer schedule, age of callus), protoplast isolation solutions (pH, osmolarity, type and concentration of cell wall hydrolyzing enzymes, addition of polyamines) and conditions (amount of time in enzyme, amount of tissue per volume of enzyme incubation medium, agitation, preplasmolysis of source tissue, type of callus), and purification procedures (filtration and-or flotation), were found to affect both yield and viability of protoplasts (based upon fluorescein-diacetate staining). Our isolation procedure yielded high numbers of viable, uninucleated maize callus protoplasts which were densely cytoplasmic and varied in size from 20 to 50 m in diameter. Protoplasts plated in solid medium formed walls and divided several times. Of several gelling agents tested for protoplast propagation, only agarose resulted in protoplasts capable of sustained divisions leading to the formation of microcalli. Plating efficiency was established over a wide range of protoplast densities (10³–10⁷ protoplasts/ml). Highest plating efficiency (25%) was obtained at 1·10⁶ protoplasts/ml). The resulting microcalli grew to be dense clusters of about 0.1–0.5 mm in diameter and then stopped growing. Nurse cultures of maize and carrot (Daucus carota L.), were used to establish that individual protoplasts (not contaminating cells or cell clusters) formed walls and divided. Nurse cultures also increased the efficiency of microcallus formation from protoplasts.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - MS Murashige and Skoog (1962) salts - MS 1D Murashige and Skoog salts with 1 mg/l 2,4-D - MS 2D Murashige and Skoog salts with 2 mg/l 2,4-D - N₆ medium of Chu et al. (1975) - NN67-mod medium of Nitsch and Nitsch (1967) as modified in the present paper - FDA fluorescein diacetate - LMP low melting point     

Protoplast isolation and callus production from leaves of tissue-cultured Vitis spp.

Protoplasts were isolated from mesophyll of axenic cultures of grape, Vitis rotundifolia cv. Summit and V. vinifera cv. Cabernet Sauvignon. Enzymes effective for protoplast isolation were Macerozyme R-10 (0.5% and 0.1%) and Cellulase Onozuka R-10 (1.0% and 0.5%) for V. rotundifolia and V. vinifera, respectively. Polyvinylpyrrolidone and 2-(N-morpholino)ethanesulfonic acid were essential in the isolation media. Protoplasts were purified using flotation/centrifugation. The protoplasts of V. rotundifolia cultured in Gamborg's B5 basal medium with 2.2 M 6-benzyladenine, 4.5 M 2,4-dichlorophenoxyacetic acid and 0.4% agarose gave the best plating efficiency of conditions tried in this study. Cell division occurred within 5 to 6 days and visible microcalli developed within one month. After 6 weeks in culture, microcalli transferred to liquid medium exhibited active callus growth. Protoplasts of V. vinifera cultured under these conditions had similar results.Abbreviations MES 2-(N-morpholino)ethanesulfonic acid monohydrate - PVP polyvinylpyrrolidone - PDS potassium dextran sulfate - BA 6-benzyladenine - 2,4-D 2,4-dichlorophenoxyacetic acid - FDA fluorescein diacetate     

Chromosomes are eliminated in the symmetric fusion between <Emphasis Type="Italic">Arabidopsis </Emphasis><Emphasis Type="Italic">thaliana</Emphasis> L. and <Emphasis Type="Italic">Bupleurum scorzonerifolium</Emphasis> Willd.

In order to investigate chromosome elimination in symmetric somatic hybridization between Bupleurum scorzonerifolium and Arabidopsis thaliana, protoplasts were isolated from suspension cultures of both A. thaliana and B. scorzonerifolium parents. Biparental protoplasts were mixed at a rate of 1.5:1 and fused with PEG-method. After protoplast fusion, the products were cultured in the P5 liquid medium for microcallus formation. Single cell lines formed from microcalli after subculturing on the MB1 (Xia and Chen, Plant Sci 120:197–203, 1996) solid medium. The putative somatic hybrid cell lines were identified by cytological and molecular analysis. Of the 132 somatic cell lines generated, 16 were identified as somatic hybrids, with the phenotypes resembled B. scorzonerifolium parent. These hybrids showed a complete set of B. scorzonerifolium chromosome and 0–2 small chromosome(s) of A. thaliana. A few of them showed nuclear and cytoplasmic SSR fragments of A. thaliana. These hybrid cell lines could differentiate to green spots, buds/leaves through complementation of regeneration ability. The chromosomes elimination of A. thaliana was discussed. Wang Minqin and Zhao Junsheng contributed equally to the work.     

Fertile indica and japonica rice plants regenerated from protoplasts isolated from embryogenic haploid suspension cultures

Summary A system to regenerate fertile rice (Oryza sativa L.) plants (both indica and japonica varieties) from protoplasts isolated from anther-derived embryogenic haploid suspension cultures has been established. Green plants were regenerated from protoplast-derived cell clusters five months after suspension culture initiation. Protoplast yields and subsequent growth of the protoplast-derived microcalli were enhanced by transferring suspension cells into AA medium (Muller et al. 1978) three to four days prior to protoplast isolation. Protoplasts were cultured initially in Kao medium (Kao et al. 1977) and in association with nurse cells for four weeks. Protoplast-derived microcalli were transferred onto N6 (Chu et al. 1975) or MS (Murashige and Skoog 1962) media for callus proliferation. Callus growth was more rapid and the calli were more enbryogenic when grown on N6 medium. The 2,4-D concentration used to develop the suspension culture was important. Cell cultures grown in medium containing 0.5 mg/l 2,4-D released protoplasts whose plating efficiency was higher than for protoplasts obtained from suspension cultures grown in 2.0 mg/l 2,4-D. However, suspension cells grown in 2.0 mg/l 2,4-D were superior with regard to the ability of protoplast-derived calli to regenerate green plants. Amongst several hormone treatments evaluated, a combination of 0.5 mg/l NAA + 5.0 mg/l BAP resulted in the largest number of green plants regenerated. There were no significant differences between BAP or kinetin regarding total number of plants regenerated. More than 200 green plants have been produced form six independently initiated suspension cell lines. The number of regenerated plants per 10⁶ protoplats plated anged from 0.4 to 20.0, and the average seed fertility of single panicles of these R_O plants was about 40%.     

Plant regeneration of rose (Rosa hybridia) from embryogenic cell-derived protoplasts

Culture conditions are described for sustained cell division and plant regeneration from protoplasts of rose (Rosa hybrida L. `Sumpath'). Protoplasts were enzymatically isolated from 2-week-old embryogenic cell suspension cultures. Freshly isolated protoplasts were plated as a thin layer onto protoplast culture medium (half-strength 21 Murashige and Skoog's medium containing 60 g l^–1 myo-inositol, 4.4 M BA, and 1.4 M 2,4-D) at a density of 5×10⁴ protoplasts ml^–1. The plating efficiency reached 3.9% after 2 weeks of culture. However, few protoplasts underwent cell division when cultured in protoplast culture medium in which 60 g l^–1 myo-inositol was replaced with the same osmolarity of 90 g l^–1 mannitol, indicating that myo-inositol is essential for sustained cell division of protoplasts. Colonies were formed after 8 weeks of culture at a frequency of 0.2%. Colonies were then transferred to colony culture medium (0.4% Gelrite-solidified protoplast culture medium) and maintained by subculturing at 4-week intervals to form embryogenic calluses. Upon transfer to half-strength MS basal medium, embryogenic calluses gave rise to numerous somatic embryos. Somatic embryos were transferred to half-strength MS basal medium containing 48 mg l^–1 ferric ethylenediamine di-(o-hydroxyphenylacetate), where they subsequently developed into plantlets at a frequency of 30.9%. The plantlets had the same chromosome number of 2n=3x=21 as the source plant. They were successfully transplanted to potting soil and grown to maturity in a greenhouse.     

Enhanced protoplast division by encapsulation in droplets: An advance towards somatic hybridisation in recalcitrant white lupin

Lupins are highly nutritious fodder and pulse crops but the greatest challenge in their genetic enhancement is the difficulty in obtaining hybrids through conventional sexual approaches. To bypass this, a procedure for the culture of hitherto recalcitrant lupin protoplasts is now being developed so that the somatic hybrids can be regenerated. This study provides a basis for a regime to culture lupin protoplasts. Cotyledonary protoplasts of white lupin (Lupinus albus) were plated in two diverse media for the evaluation of various plating regimes. The protoplasts divided in agarose as well as in Gelrite? but embedding in agarose at 6 g L^?1 concentration resulted in a higher rate of mitosis. Sodium alginate embedding inhibited protoplast division. Protoplast plating in the form of liquid suspension was significantly inferior to embedding. A filter paper substratum was clearly noxious to protoplast division. Vis‐à‐vis other designs of plating, a 400% improvement in protoplast elongation and division was achieved by plating in the form of 25 μL droplets at the base of 60 mm × 15 mm Nunclon? dish and overlaying with liquid medium. Better results in terms of protoplast elongation and division were obtained with K8p medium as compared to the AS medium. This report on lupin protoplast culture represents a significant breakthrough in the genus in which morphogenesis has not been described to date.     

An efficient and rapid procedure for plantlet regeneration from chicory mesophyll protoplasts

An efficient procedure for plantlet regeneration from chicory mesophyll protoplasts has been developed in order to perform protoplast fusion experiments. Protoplasts were isolated from a genotype of Italian red chicory (CH 363) and purified by centrifugation in a solution containing 13% (w/v) sucrose to collect uniform protoplasts in size. After 2 days culture at a density of 2×10⁴ protoplasts ml⁻¹ of liquid medium, protoplasts were cultured following three different procedures: in liquid medium, stratified in semi-solid medium, and embedded in Ca-alginate droplets. Four different media were used and culture procedures were evaluated recording the protoplast viability, protoplast division frequency and plating efficiency for each experiment. The embedding of protoplasts in Ca-alginate droplets enhanced both division frequency and plating efficiency for chicory mesophyll cells. Furthermore, this procedure shortened the cycle of plant regeneration from protoplasts, which could be completed in eight weeks. This revised version was published online in June 2006 with corrections to the Cover Date.     

Plant regeneration from mesophyll-protoplasts of four different ecotypes and two marker lines from Arabidopsis thaliana using a unique protocol

A protocol for obtaining regenerated fertile plants from mesophyll protoplasts of four ecotypes (Col C24, Per-1, Bur-0, Landsberg erecta) and two marker lines (M4 and M10) of Ardbidopsis thaliana is described. The different lines showed plating efficiencies between 1.0 and 3.9% using Nitsch medium or this medium supplemented with coconut water. For the differentiation of callus into normal shoots a single shoot regeneration medium was applicable to all ecotypes, but depending on the line other regeneration media showed to be more suitable. The results indicated that the protoplast culture procedure is applicable, with minor modifications, to all tested genotypes but the most suitable shoot regeneration medium should be established for each A. thaliana line.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - BAP 6-benzyl-aminopurine - IAA indole-3-acetic acid - IPA isopentenyladenine - IPAR isopentenyladenosine - MES 2-[N Morpholino]ethanesulfonic acid - MS Murashige and Skoog - NAA naphthaleneacetic acid     

Efficient plant regeneration from cell suspension protoplasts of the woody medicinal plant Solanum dulcamara L. (bittersweet,woody nightshade)

Large populations of viable protoplasts were released from suspension cultured cells of the woody medicinal plant Solanum dulcamara (bittersweet, woody nightshade) when the cells were harvested 3 to 7 months after culture initiation and 4 to 5 days after transfer to fresh medium. A Bio-Gel p6 purified enzyme mixture enhanced the protoplast plating efficiency 6 fold compared to the unpurified mixture, without affecting protoplast yield. Agarose-solidified medium markedly improved protoplast division and colony formation, and enabled protoplasts to be plated at lower densities than in liquid medium. All protoplast-derived tissues produced shoots on MS based medium with 1.0 mgl^-1 zeatin. Shoots rooted readily on medium lacking phytohormones. Cytological examination revealed high chromosome stability of suspension cultured cells, of plants derived from such cells, and of protoplast-derived plants. The implication of these results is discussed in relation to the genetic manipulation of this pharmaceutically important plant.     

High plating efficiency and plant regeneration frequency in low density protoplast cultures derived from an embryogenic Brassica napus cell suspension

Protoplasts were isolated from an embryogenic cell suspension culture derived from microspores of Brassica napus cv. Jet Neuf. Protoplast yield varied with the cell suspension growth medium. Optimization of protoplast plating density, manipulation of culture medium, carbon source and medium matrix, and inclusion of Ficoll resulted in protoplast plating efficiencies close to 30%. Placement of the protoplasts close to the gas interface contributed greatly to the elevated plating efficiency. Low density cultures could be induced to regenerate calli at optimum plating efficiencies if grown in the presence of nurse culture. This is of great advantage for manipulation of individual protoplasts or for microinjection. Plants were regenerated directly from the cell suspension or from the protoplast cultures.Abbreviations BA N⁶-benzyladenine - 2,4-D 2,4-dichlorophenoxyacetic acid - IAA indole-3-acetic acid - NAA naphthaleneacetic acid     

Strategies for promoting division of cultured plant protoplasts: synergistic beneficial effects of haemoglobin (Erythrogen) and Pluronic F-68

Novel approaches, involving supplementation of aqueous culture medium with haemoglobin solution (Erythrogen), in the presence or absence of the copolymer surfactant, Pluronic F-68, have been evaluated to facilitate cellular oxygen availability to promote mitotic division. Cell-suspension-derived protoplasts of albino Petunia hybrida cv. Comanche were cultured for up to 45 days in KM8P medium containing 1:50–1:500 (vol:vol) Erythrogen. The mean initial protoplast plating efficiency after 9 days with 1:50 Erythrogen (18.5%) was significantly greater (P<0.05) than in untreated controls (11.3%). Supplementation of culture medium with 1:50 Erythrogen, together with 0.01% (wt/vol) Pluronic F-68, increased the mean plating efficiency after 9 days (24.4%) by 92% (P<0.05) over the control (12.7%). These treatments also produced increases in biomass of protoplast-derived cells up to 2.5-fold greater than control (P<0.01) over 80 days. Gassing the medium, containing 1:50 Erythrogen, with carbon monoxide abolished the increase in plating efficiency. There was no additional benefit of gassing Erythrogen-supplemented medium with 100% oxygen. The synergistic, beneficial effect of Erythrogen and Pluronic F-68 on protoplast division has implications for plant biotechnology utilising protoplasts. Received: 24 May 1996 / Revision received: 12 July 1996 / Accepted: 15 August 1996     

Regeneration of Mesophyll Protoplasts Isolated from Dihaploid Clones of Solanum tuberosum

Protoplasts have been isolated from leaves of shoot cultures of six dihaploid clones of Solanum tuberosum L. (2n = 2x = 24). In the KM medium (Kao and Michayluk 1975), sustained cell divisions were obtained in up to 50% of the plated protoplasts of four clones, whereas only a few divisions occurred in the other two clones. The first mitosis appeared 2–8 days after plating, dependent on the clones. In the clones showing sustained cell divisions, a protoplast titre of about 5 × 10³ per ml turned out to be optimal. The culture conditions for protoplasts of one of the poorly growing clones, clone H² 140, have been improved using modified KM media, plating at a concentration of as high as 5 × 10⁴ cells per ml, and subsequent diluting at intervals 5 days. The dilutions were carried out with media containing 0.25% agar. Up to 60% of the plated protoplasts underwent divisions within 10 days under these conditions. After about 15 days, the regenerants were transferred onto media inducing organogenesis. Shoots and roots were formed on modified media MS (Murashige and Skoog 1962) and B5 (Gamborg et al. 1968). Plants have been regenerated in four of the investigated clones. Countings of chromosomes revealed a satisfactory stability of the karyotype in shoot culture and protoplast regeneration.     

Somatic embryogenesis in protoplast derived calli of cultivated jute,Corchorus capsularis L.

Protoplasts were isolated from cotyledon, hypocotyl and mesophyll cells of Corchorus capsularis L., a major fibre crop, by one step enzyme digestion method. They were further cultured successfully on modified KM-8p (Kao and Michayluk, 1975) medium to form microcalli. The required cultural conditions could be used to achieve 34% to 78% plating efficiency, depending upon the source of protoplasts. Hypocotyl protoplasts gave the highest plating efficiency. On transfer to regeneration medium, somatic embryos developed at high frequency. The present success is a significant step forward in the development of meaningful plant cell culture methods for application in jute.Abbreviations B₅ Gamborg et al., 1968 - MS Murashige and Skoog, 1962 - SH Schenk and Hildebrandt, 1972 - Ad-SO₄ Adenine sulphate - BAP 6-benzylaminopurine - NAA 1-naphthalene acetic acid - GA₃ Gibberellic acid - 2,4-D 2,4-dichlorophenoxy acetic acid - Kn Kinetin - IBA Indole-3-butyric acid     

Colony formation and plant regeneration from mesophyll protoplasts of Solanum etuberosum

A procedure for the culture of Solanum etuberosum mesophyll protoplasts with subsequent shoot regeneration is described. Several factors affected protoplast yield, colony formation, and shoot regeneration from in vitro plants. A protoplast isolation medium with 0.6 M sucrose produced twice the yield as one with 0.3 M sucrose. uowever, a higher concentration of osmoticum was inhibitory to colony development unless it was diluted into a lower osmoticum medium in a bilayer system. A 16 hour light/8 hour dark photoperiod for stock plants allowed twice the protoplast yield compared to plants grown under continuous light but no effect was found on subsequent colony formation or shoot regeneration. The concentrations of four major salts in the protoplast plating medium were critical for a high frequency of colony formation from protoplasts. Levels of 0.25 × or 1 × were considerably better than 4 ×. Fast colony formation, but at a lower efficiency, was obtained with a monolayer plating method. A bilayer plating system allowed a higher efficiency but colonies developed more slowly. For the best treatments, the frequency of colony formation from protoplasts ranged from 2.4 to 3.6 × 10^-3 with 37% to 66% of the colonies producing shoots ten weeks after protoplast isolation.Cooperative investigation of the USDA-ARS and the Wisconsin Agric. Exp. Stn.     

Efficient isolation, culture and regeneration of Lotus corniculatus protoplasts

This paper reports an improved protocol for isolation, culture and regeneration of Lotus corniculatus protoplasts. A range of parameters which influence the isolation of L. corniculatus protoplasts were investigated, i.e., enzyme combination, tissue type, incubation period and osmolarity level. Of three enzyme combinations tested, the highest yield of viable protoplasts was achieved with the combination of 2% Cellulase Onozuka RS, 1% Macerozyme R-10, 0.5% Driselase and 0.2% Pectolyase. The use of etiolated cotyledon tissue as a source for protoplast isolation proved vital in obtaining substantially higher protoplast yields than previously reported. Culture of the protoplasts on a nitrocellulose membrane with a Lolium perenne feeder-layer on the sequential series of PEL medium was highly successful in the formation of micro-colonies with plating efficiencies 3–10 times greater than previous studies. Shoot regeneration and intact plants were achieved from 46% of protoplast-derived cell colonies.