A new integrated membrane filtration and chromatographic device

To improve protein separation, a novel integrated device combining membrane filtration and chromatography has been developed. The device basically consists of a hollow fiber filtration module whose shell side is filled with chromatographic resin beads. However, there is an essentially impermeable coated zone near the hollow fiber module outlet. The integrated device enjoys the advantages of both membrane filtration and chromatography; it also allows one to load the chromatographic media directly from the fermentation broth or lysate and separate the adsorbed proteins through the subsequent elution step in a cyclic process. Interfacial polymerization was carried out to coat the bottom section of the hollow fiber membrane; the rest of the hollow fiber membrane remained unaffected. Myoglobin (Mb) and alpha-lactalbumin (alpha-LA) were primarily used as model proteins in a binary mixture; binary mixtures of Mb and bovine serum albumin (BSA) were also investigated. Separation behaviors of binary protein mixtures were studied in devices having either an ultrafiltration (UF) or a microfiltration (MF) membrane. Experimental results show that the breakthrough time and the protein loading capacities were dramatically improved after introducing the impermeable coating in both UF and MF modules. For a synthetic yeast fermentation broth feed, four loading-washing-elution-reequilibration-based cyclic runs for separation of Mb and alpha-LA were performed in the device using a MF membrane with a coated zone without cleaning in between. The Mb and alpha-LA elution profiles for the four consecutive runs were almost superimposable. Due to lower transmembrane flux in this device plus the periodical washing-elution during the chromatographic separation, fouling was not a problem, unlike in conventional microfiltration.     

A multiple filtration device for glass fibre filters

A practical multiple filter holder is described for collection of particles on glass fibre filters. The device utilizes large diameter discs and the ends of individual filter tubes compress against the filter so that, after filtration, the separate filtering areas can easily be taken from the large disc with forceps. If analyses of collected particulate matter are to be made at a later time, the filtering areas are left attached to the original filter. Precise volumes of water can be filtered by attaching volumetric pipettes to individual filter tubes.     

A new method for motion capture of the scapula using an optoelectronic tracking device: a feasibility study

Optoelectronic tracking systems are rarely used in 3D studies examining shoulder movements including the scapula. Among the reasons is the important slippage of skin markers with respect to scapula. Methods using electromagnetic tracking devices are validated and frequently applied. Thus, the aim of this study was to develop a new method for in vivo optoelectronic scapular capture dealing with the accepted accuracy issues of validated methods.

Eleven arm positions in three anatomical planes were examined using five subjects in static mode. The method was based on local optimisation, and recalculation procedures were made using a set of five scapular surface markers.

The scapular rotations derived from the recalculation-based method yielded RMS errors comparable with the frequently used electromagnetic scapular methods (RMS up to 12.6° for 150° arm elevation). The results indicate that the present method can be used under careful considerations for 3D kinematical studies examining different shoulder movements.     

Evaluation of the feasibility and preference of Nox-A1 type 2 ambulatory device for unattended home sleep test: a randomized crossover study

Sleep and Biological Rhythms - There is an increasing need for portable sleep monitoring in clinical practice, but there is no comparative study that used the same device for home and in-laboratory...     

Separation of protoplasts from mycelial fragments with a simple filtration device

Summary A simple filtration device was developed to obtain pure protoplasts. Pure protoplasts, free of mycelial fragments, are required for biological manipulation of protoplasts. The filtration device can also be used to separate fungal conidia, isolated nuclei, or DNA from mycelial fragments for further purification and manipulation.     

High-density culture of FM-3A cells using a bioreactor with an external tangential-flow filtration device

A novel bioreactor system developed for high-density cultures of suspended mammalian cells is described using a tangential-flow filtration device outside the culture vessel to separate viable cells from spent medium. The filtration device is based on thin porous microfiltration membranes with a pore size of 0.20–0.65 m. Because cells have a diameter of about 10–20 m, they cannot permeate these membranes with the spent medium. So, allowing a perfusion culture to be created using this system. In most membrane filtration systems, clogging of the membranes has made long-term operation difficult. In this system, however, high pressure is not applied directly to the membrane, thus minimizing clogging. Also, clogging of the membrane was prevented by washing the membrane surface once a day, and increasing the membrane surface are. With this system, FM-3A cells were cultured and maintained at a high density of 3.0×10⁷ cells/ml for two weeks, and a continuous culture was supported for as long as 34 days.Abbreviation DO dissolved oxygen - PVDF polyvinylidene di-fluoride     

Parallel DNA template preparation using a vacuum filtration sample transfer device

Solid-phase techniques have facilitated the handling of biochemical analytes. This has stimulated the development of systems by which large sample panels can be analyzed with high levels of security and quality. We describe a sample transfer device based on the principle of vacuum filtration, which enables parallel handling of 96 samples of analytes bound to Sepharose beads. The tool was employed for strand separation of DNA samples, by attracting the beads to filter probes while passing them between the reagent solutions. The samples were analyzed using Pyrosequencing technology and proved to yield genotyping results of high quality. The presented sample preparation procedure provides an important link in the development of integrated systems for rapid genetic analysis at a low cost. In addition, the same filter could be reused extensively with very low risk for detectable cross-contamination between assays and without any reduction in processing capacity, thus further reducing the cost per analyzed sample.     

Investigation of fouling mechanisms of virus filters during the filtration of protein solutions using a high throughput filtration screening device

The downstream process development of novel antibodies (Abs) is often challenged by virus filter fouling making a better understanding of the underlying mechanisms highly desirable. The present study combines the protein characterization of different feedstreams with their virus filtration performance using a novel high throughput filtration screening system. Filtration experiments with Ab concentrations of up to 20 g/L using either low interacting or hydrophobically interacting pre-filters indicate the existence of two different fouling mechanisms, an irreversible and a reversible one. At the molecular level, size exclusion chromatography revealed that the presence of large amount of high molecular weight species—considered as irreversible aggregates—correlates with irreversible fouling that caused reduced Ab throughput. Results using dynamic light scattering show that a concentration dependent increase of the mean hydrodynamic diameter to the range of dimers (17 nm at 20 g/L) together with a negative DLS interaction parameter k_D (−18 mL/g) correlate with the propensity to form reversible aggregates and to cause reversible fouling, probably by a decelerated Ab transport velocity within the virus filter. The two fouling mechanisms are further supported by buffer flush experiments. Finally, concepts for reversible and irreversible fouling mechanisms are discussed together with strategies for respective fouling mitigation. © 2019 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2776, 2019.     

Continuous scalable blood filtration device using inertial microfluidics

Cell separation is broadly useful for applications in clinical diagnostics, biological research, and potentially regenerative medicine. Recent attention has been paid to label‐free size‐based techniques that may avoid the costs or clogging issues associated with centrifugation and mechanical filtration. We present for the first time a massively parallel microfluidic device that passively separates pathogenic bacteria cells from diluted blood with macroscale performance. The device was designed to process large sample volumes in a high‐throughput, continuous manner using 40 single microchannels placed in a radial array with one inlet and two rings of outlets. Each single channel consists of a short focusing, gradual expansion and collection region and uses unique differential transit times due to size‐dependent inertial lift forces as a method of cell separation. The gradual channel expansion region is shown to manipulate cell equilibrium positions close to the microchannel walls, critical for higher efficiency collection. We demonstrate >80% removal of pathogenic bacteria from blood after two passes of the single channel system. The massively parallel device can process 240 mL/h with a throughput of 400 million cells/min. We expect that this parallelizable, robust, and label‐free approach would be useful for filtration of blood as well as for other cell separation and concentration applications from large volume samples. Biotechnol. Bioeng. 2010;107: 302–311. © 2010 Wiley Periodicals, Inc.     

A low-cost automated device incorporating a hollow fiber filtration cartridge for large-scale production of ghosts from human erythrocytes

Readily available elements were used to build an automatic apparatus dedicated to the preparation of erythrocyte ghosts. The apparatus is designed around a low-cost re-usable hollow-fiber filtration cartridge (marketed for therapeutic plasmapheresis). The apparatus is controlled by a simple programmer (based on a diode matrix and low cost timers and liquid level sensors): once the apparatus is loaded with whole red blood cells, washing of cells, as well as hemolysis and washing of ghosts, is performed by the machine in about 4.5 h without any operator intervention. Automatic filter cleaning takes a further 110 min.     

Ambulatory impedance cardiography: a feasibility study

A wearable, ambulatory impedance monitor(AIM) has been developed to permit impedance cardiographic measurementswhile patients and volunteers engage in normal dailyactivities. The AIM system was developed for use with anew hybrid tetrapolar spot-band electrode configuration and wasdesigned to be comfortable and inconspicuous. Theobjective of the present study was to provide a preliminary evaluationof AIM comparability with the widely validated Minnesota model 304Bimpedance cardiograph with standard tetrapolar band electrodes.Orthostatic challenge was used to systematically alter cardiac functionin a laboratory setting in 11 healthy men and women. Both while thesubjects were sitting and while they were standing, the AIM yieldedmeasures of cardiac function, including heart rate, preejection period,left ventricular ejection time, and stroke volume, that were similar tothose acquired by using the reference Minnesota 304B system (allPearson R correlations > +0.87, allP < 0.001). Cardiac responses topostural shift, expressed as change measures from sitting to standing,were also comparable for the AIM and Minnesota reference monitoringsystems. Potential applications, including the assessment of 24-hhemodynamic profiles, are illustrated and discussed.

     

A feasibility study for the in situ remediation of a former tank farm

A feasibility study of the in situ remediation of a former tank farm (on a petrol station) was made over a period of 150 days at 10 °C. The natural attenuation (which is a sum of the abiotic losses and the natural biodegradation by the indigenous soil microorganisms) and the effect of biostimulation by inorganic nutrient supply were investigated. The contamination was not homogeneously distributed in the seven soil samples investigated. Nutrient addition had no statistically significant effect on hydrocarbon decontamination. A remarkable part of the decontamination had to be attributed to natural attenuation. Soil microbial counts and CO₂ evolution indicated a negative effect of nutrition on the number of microbial hydrocarbon degraders and on soil microbial activity.     

A randomised controlled feasibility trial of a BabyWASH household playspace: The CAMPI study

BackgroundWater, sanitation and hygiene (WASH) interventions should support infant growth but trial results are inconsistent. Frequently, interventions do not consider behaviours or transmission pathways specific to age. A household playspace (HPS) is one intervention component which may block faecal-oral transmission. This study was a two-armed, parallel-group, randomised, controlled feasibility trial of a HPS in rural Ethiopia. It aimed to recommend proceeding to a definitive trial. Secondary outcomes included effects on infant health, injury prevention and women’s time.MethodsNovember 2019−January 2020 106 households were identified and assessed for eligibility. Recruited households (N = 100) were randomised (blinded prior to the trial start) to intervention or control (both n = 50). Outcomes included recruitment, attrition, adherence, and acceptability. Data were collected at baseline, two and four weeks.FindingsRecruitment met a priori criteria (≥80%). There was no loss to follow-up, and no non-use, meeting adherence criteria (both ≤10%). Further, 48.0% (95% CI 33.7−62.6; n = 24) of households appropriately used and 56.0% (41.3−70.0; n = 28) cleaned the HPS over four weeks, partly meeting adherence criteria (≥50%). For acceptability, 41.0% (31.3−51.3; n = 41) of infants were in the HPS during random visits, failing criteria (≥50%). Further, the proportion of HPS use decreased during some activities, failing criteria (no decrease in use). A modified Barrier Analysis described good acceptability and multiple secondary benefits, including on women’s time burden and infant injury prevention.InterpretationDespite failing some a priori criteria, the trial demonstrated mixed adherence and good acceptability among intervention households. A definitive trial to determine efficacy is warranted if recommended adjustments are made.FundingPeople In Need; Czech Development Agency.Trial registrationRIDIE-ID-5de0b6938afb8.     

LCA study of a plasma television device

Purpose  

Nowadays, there is one television device for every four human beings, making television one of the most popular pieces of electrical and electronic equipment in our society, with the so-called flat-screen technologies gaining more and more market share. For one such technology, the plasma display panel (PDP), no complete life cycle assessment (LCA) studies have existed thus far, and therefore, the question as to their environmental performance, especially as compared with LCD technology, is still open. This paper describes a detailed LCA study of a PDP television, including a first comparison of it with the two competing technologies, the cathode ray tube and the liquid crystal display technologies.     

A feasibility study of multispectral image analysis of skin tumors

To develop a noninvasive, early-detection method for skin cancers, a feasibility study of multispectral image analysis was investigated. The three most frequently occurring skin cancer types, ten basal-cell carcinomas (BCCs), ten squamous-cell carcinomas (SCCs) and five malignant melanomas (MMs) were studied, along with ten normal moles. Images were acquired by a charge-coupled device camera using eight narrow-band filters ranging from 450 nm to 800 nm, at 50-nm intervals. To extract main features of these tumors, principal components analysis (PCA) was performed, because it projects the multidimensional (here, eight-dimensional) data in the direction of maximum data variance. Then, the primary PCA components for red, green, and blue subset images were analyzed in terms of hue-saturation-intensity (HSI). By hue distributions, the BCCs and SCCs were differentiated from the MMs and normal moles. Texture information was used to further classify tumor types after the HSI analysis. The texture analysis, performed using a spatial gray-level co-occurrence matrix (SGCM), could separate MMs from normal moles. The BCCs and SCCs were further studied by Fisher's linear discriminant analysis. Distribution was described as a Gaussian mixture model. By this classification procedure, seven BCCs, eight SCCs, five MMs, and ten NMs were correctly classified. Three BCCs and two SCCs were unseparable. Thus, multispectral skin cancer image analysis has potential to diagnose skin cancers.