Calcium entry into pollen tubes

Growing pollen tubes require calcium to maintain a tip-focused cytosolic gradient and as a constituent of the constantly expanding cell wall. Advances in cell and molecular biology as well as electrophysiology implicate several candidate channels and receptors in the flow of calcium into the cell. In this review we discuss the channels that have been identified and consider the role of the growing tip cell wall acting as a sink for calcium thus accounting for differences in oscillatory phase between influx measured on the outside of the cell and changes in tip concentration inside the cell. We also briefly draw attention to uptake mechanisms that restrict and shape the calcium signature in the growing pollen tube.     

Polar growth in pollen tubes is associated with spatially confined dynamic changes in cell mechanical properties

Cellular morphogenesis involves changes to cellular size and shape which in the case of walled cells implies the mechanical deformation of the extracellular matrix. So far, technical challenges have made quantitative mechanical measurements of this process at subcellular scale impossible. We used micro-indentation to investigate the dynamic changes in the cellular mechanical properties during the onset of spatially confined growth activities in plant cells. Pollen tubes are cellular protuberances that have a strictly unidirectional growth pattern. Micro-indentation of these cells revealed that the initial formation of a cylindrical protuberance is preceded by a local reduction in cellular stiffness. Similar cellular softening was observed before the onset of a rapid growth phase in cells with oscillating growth pattern. These findings provide the first quantitative cytomechanical data that confirm the important role of the mechanical properties of the cell wall for local cellular growth processes. They are consistent with a conceptual model that explains pollen tube oscillatory growth based on the relationship between turgor pressure and tensile resistance in the apical cell wall. To further confirm the significance of cell mechanics, we artificially manipulated the mechanical cell wall properties as well as the turgor pressure. We observed that these changes affected the oscillation profile and were able to induce oscillatory behavior in steadily growing tubes.     

Chemically mediated mechanical expansion of the pollen tube cell wall

Morphogenesis of plant cells is tantamount to the shaping of the stiff cell wall that surrounds them. To this end, these cells integrate two concomitant processes: 1), deposition of new material into the existing wall, and 2), mechanical deformation of this material by the turgor pressure. However, due to uncertainty regarding the mechanisms that coordinate these processes, existing models typically adopt a limiting case in which either one or the other dictates morphogenesis. In this report, we formulate a simple mechanism in pollen tubes by which deposition causes turnover of cell wall cross-links, thereby facilitating mechanical deformation. Accordingly, deposition and mechanics are coupled and are both integral aspects of the morphogenetic process. Among the key experimental qualifications of this model are: its ability to precisely reproduce the morphologies of pollen tubes; its prediction of the growth oscillations exhibited by rapidly growing pollen tubes; and its prediction of the observed phase relationships between variables such as wall thickness, cell morphology, and growth rate within oscillatory cells. In short, the model captures the rich phenomenology of pollen tube morphogenesis and has implications for other plant cell types.     

A model for the mechanism of tip extension in pollen tubes

Three main mechanisms are proposed to account for the tip growth of pollen tubes. (1) The tip region is supported against the internal osmotic pressure of the cell by a fibrillar network, composed mainly of microfilaments, that is stabilized by calcium ions. Tip extension is promoted by a lowering of the local cytoplasmic calcium ion concentration, through uptake by the mitochondria and/or endoplasmic reticulum, which leads to a weakening of the fibrillar network. (2) Vesicles, derived from dictyosomes in the main body of the tube, fuse with the apical plasma membrane, providing new membrane and further carbohydrate for the wall. The rate of fusion is proportional to the rate of diffusion of calcium ion across the plasma membrane at the tip. (3) The callose lining present in the pollen tube wall, except at the tip, renders the wall impermeable and restricts entry of calcium ions to the apical plasma membrane. This restriction limits the rate of vesicle fusion, and tube growth, to the tip.This model is discussed in the light of previous observations on the growth and structure of pollen tubes under normal and experimental conditions.     

Ionic and osmotic disruptions of the lily pollen tube oscillator: testing proposed models

Two mechanisms have been proposed as the primary control of oscillating tip growth in Lilium longiflorum Thunb. pollen tubes: changes in cell wall strength (Holdaway-Clarke et al. 1997) or alternatively, changes in turgor pressure (Messerli et al. 2000). Here we have modified the ionic and osmotic concentrations of the growth medium to test predictions derived from both models. Raising the [Ca2+]o tenfold above normal reduced the amplitude of the [Ca2+]i oscillations and growth oscillations while it raised the basal [Ca2+]i and growth rate such that the average growth rate did not change. Raising the [H+] of the growth medium tenfold reversibly decreased and sometimes eliminated the [Ca2+]i and growth oscillations without changing the average growth rate. Lowering the [H+] tenfold led to irregular frequency and amplitude [Ca2+]i oscillations, reduced the average growth rate of tubes and led to cell bursting in 33% of tubes. Addition of 50 mM H+ buffer, MES, to prevent pH changes in the cell wall increased the period, amplitude and duration of both [Ca2+]i and growth oscillations. Changing the [K+]o did not markedly effect [Ca2+]i oscillations. Reducing the osmolarity of the medium led to transient large-amplitude [Ca2+]i and growth oscillations while reducing large-amplitude oscillations over long periods. In many different conditions under which growth still occurs, lily pollen tubes maintain growth oscillations, albeit with modified frequency, amplitude and duration. We conclude that modifications to both proposed models are necessary to explain oscillating growth in this system.     

Exocytosis Precedes and Predicts the Increase in Growth in Oscillating Pollen Tubes

We examined exocytosis during oscillatory growth in lily (Lilium formosanum and Lilium longiflorum) and tobacco (Nicotiana tabacum) pollen tubes using three markers: (1) changes in cell wall thickness by Nomarski differential interference contrast (DIC), (2) changes in apical cell wall fluorescence in cells stained with propidium iodide (PI), and (3) changes in apical wall fluorescence in cells expressing tobacco pectin methyl esterase fused to green fluorescent protein (PME-GFP). Using PI fluorescence, we quantified oscillatory changes in the amount of wall material from both lily and tobacco pollen tubes. Measurement of wall thickness by DIC was only possible with lily due to limitations of microscope resolution. PME-GFP, a direct marker for exocytosis, only provides information in tobacco because its expression in lily causes growth inhibition and cell death. We show that exocytosis in pollen tubes oscillates and leads the increase in growth rate; the mean phase difference between exocytosis and growth is –98° ± 3° in lily and –124° ± 4° in tobacco. Statistical analyses reveal that the anticipatory increase in wall material predicts, to a high degree, the rate and extent of the subsequent growth surge. Exocytosis emerges as a prime candidate for the initiation and regulation of oscillatory pollen tube growth.     

Modeling pollen tube growth: Feeling the pressure to deliver testifiable predictions

The frequency and amplitude of oscillatory pollen tube growth can be altered by changing the osmotic value of the surrounding medium. This has motivated the proposition that the periodic change in growth velocity is caused by changes in turgor pressure. Using mathematical modeling we recently demonstrated that the oscillatory pollen tube growth does not require turgor to change but that this behavior can be explained with a mechanism that relies on changes in the mechanical properties of the cell wall which in turn are caused by temporal variations in the secretion of cell wall precursors. The model also explains why turgor and growth rate are correlated for oscillatory growth with long growth cycles while they seem uncorrelated for oscillatory growth with short growth cycles. The predictions made by the model are testifiable by experimental data and therefore represent an important step towards understanding the dynamics of the growth behavior in walled cells.     

Imaging of the Yellow Cameleon 3.6 indicator reveals that elevations in cytosolic Ca2+ follow oscillating increases in growth in root hairs of Arabidopsis

In tip-growing cells, the tip-high Ca(2+) gradient is thought to regulate the activity of components of the growth machinery, including the cytoskeleton, Ca(2+)-dependent regulatory proteins, and the secretory apparatus. In pollen tubes, both the Ca(2+) gradient and cell elongation show oscillatory behavior, reinforcing the link between the two. We report that in growing root hairs of Arabidopsis (Arabidopsis thaliana), an oscillating tip-focused Ca(2+) gradient can be resolved through imaging of a cytosolically expressed Yellow Cameleon 3.6 fluorescence resonance energy transfer-based Ca(2+) sensor. Both elongation of the root hairs and the associated tip-focused Ca(2+) gradient show a similar dynamic character, oscillating with a frequency of 2 to 4 min(-1). Cross-correlation analysis indicates that the Ca(2+) oscillations lag the growth oscillations by 5.3 +/- 0.3 s. However, growth never completely stops, even during the slow cycle of an oscillation, and the concomitant tip Ca(2+) level is always slightly elevated compared with the resting Ca(2+) concentration along the distal shaft, behind the growing tip. Artificially increasing Ca(2+) using the Ca(2+) ionophore A23187 leads to immediate cessation of elongation and thickening of the apical cell wall. In contrast, dissipating the Ca(2+) gradient using either the Ca(2+) channel blocker La(3+) or the Ca(2+) chelator EGTA is accompanied by an increase in the rate of cell expansion and eventual bursting of the root hair tip. These observations are consistent with a model in which the maximal oscillatory increase in cytosolic Ca(2+) is triggered by cell expansion associated with tip growth and plays a role in the subsequent restriction of growth.     

Regulator or Driving Force? The Role of Turgor Pressure in Oscillatory Plant Cell Growth

Turgor generates the stress that leads to the expansion of plant cell walls during cellular growth. This has been formalized by the Lockhart equation, which can be derived from the physical laws of the deformation of viscoelastic materials. However, the experimental evidence for such a direct correlation between growth rate and turgor is inconclusive. This has led to challenges of the Lockhart model. We model the oscillatory growth of pollen tubes to investigate this relationship. We couple the Lockhart equation to the dynamical equations for the change in material properties. We find that the correct implementation of the Lockhart equation within a feedback loop leading to low amplitude oscillatory growth predicts that in this system changes in the global turgor do not influence the average growth rate in a linear manner, consistent with experimental observations. An analytic analysis of our model demonstrates in which regime the average growth rate becomes uncorrelated from the turgor pressure.     

Effect of extracellular calcium,pH and borate on growth oscillations in Lilium formosanum pollen tubes

Calcium ions (Ca(2+)), protons (H(+)), and borate (B(OH)(4)(-)) are essential ions in the control of tip growth of pollen tubes. All three ions may interact with pectins, a major component of the expanding pollen tube cell wall. Ca(2+ )is thought to bind acidic residues, and cross-link adjacent pectin chains, thereby strengthening the cell wall. Protons are loosening agents; in pollen tube walls they may act through the enzyme pectin methylesterase (PME), and either reduce demethylation or stimulate hydrolysis of pectin. Finally, borate cross-links monomers of rhamnogalacturonan II (RG-II), and thus stiffens the cell wall. It is demonstrated here that changing the extracellular concentrations of Ca(2+), H(+) and borate affect not only the average growth rate of lily pollen tubes, but also influence the period of growth rate oscillations. The most dramatic effects are observed with increasing concentrations of Ca(2+) and borate, both of which markedly reduce the rate of growth of oscillating pollen tubes. Protons are less active, except at pH 7.0 where growth is inhibited. It is noteworthy, especially with borate, that the faster growing tubes exhibit the shorter periods of oscillation. The results are consistent with the idea that binding of Ca(2+) and borate to the cell wall may act at a similar level to alter the mechanical properties of the apical cell wall, with optimal concentrations being high enough to impart sufficient rigidity to the wall so as to prevent bursting in the face of cell turgor, but low enough to allow the wall to stretch quickly during periods of accelerating growth.     

Periodic increases in elongation rate precede increases in cytosolic Ca2+ during pollen tube growth

Pollen tubes grown in vitro require an intracellular tip-high gradient of Ca2+ in order to elongate. Moreover, after about 2 h in vitro both the tip Ca2+ and the elongation rate of lily tubes begin to oscillate regularly with large amplitudes. This raises the question of the phase relation between these two oscillations. Previous studies lacked the temporal resolution to accurately establish this relationship. We have studied these oscillations with a newly developed, high temporal resolution system and the complementary use of both luminescent and fluorescent calcium reporters. We hereby show that the periodic increases in elongation rate during oscillatory growth of Lilium longiflorum pollen tubes clearly precede those in subtip calcium and do so by 4.1 +/- 0.2 s out of average periods of 38.7 +/- 1.8 s. Also, by collecting images of the light output of aequorin, we find that the magnitude of the [Ca2+] at the tip oscillates between 3 and 10 microM, which is considerably greater than that reported by fluorescent indicators. We propose an explanatory model that features cyclic growth and secretion in which growth oscillations give rise to secretion that is essential for the subsequent growth oscillation. We also critically compile data on L. longiflorum stylar growth rates, which show little variation from in vitro rates of pollen tubes grown in optimal medium.     

The pollen tube: a soft shell with a hard core

Plant cell expansion is controlled by a fine‐tuned balance between intracellular turgor pressure, cell wall loosening and cell wall biosynthesis. To understand these processes, it is important to gain in‐depth knowledge of cell wall mechanics. Pollen tubes are tip‐growing cells that provide an ideal system to study mechanical properties at the single cell level. With the available approaches it was not easy to measure important mechanical parameters of pollen tubes, such as the elasticity of the cell wall. We used a cellular force microscope (CFM) to measure the apparent stiffness of lily pollen tubes. In combination with a mechanical model based on the finite element method (FEM), this allowed us to calculate turgor pressure and cell wall elasticity, which we found to be around 0.3 MPa and 20–90 MPa, respectively. Furthermore, and in contrast to previous reports, we showed that the difference in stiffness between the pollen tube tip and the shank can be explained solely by the geometry of the pollen tube. CFM, in combination with an FEM‐based model, provides a powerful method to evaluate important mechanical parameters of single, growing cells. Our findings indicate that the cell wall of growing pollen tubes has mechanical properties similar to rubber. This suggests that a fully turgid pollen tube is a relatively stiff, yet flexible cell that can react very quickly to obstacles or attractants by adjusting the direction of growth on its way through the female transmitting tissue.     

Fast pollen tube growth in Conospermum species

BACKGROUND AND AIMS: An unusual form of pollen tube growth was observed for several Conospermum species (family Proteaceae). The rate of pollen tube growth, the number of tubes to emerge and the ultrastructure of these tubes are given here. METHODS: Pollen was germinated in vitro in different sucrose concentrations and in the presence of calcium channel blockers, and tube emergence and growth were recorded on a VCR. Measurements were taken of the number of tubes to emerge and rate of tube emergence. Pollen behaviour in vivo was also observed. The ultrastructure of germinated and ungerminated pollen was observed using TEM. RESULTS: After 10 s to 3 min in germination medium, up to three pollen tubes emerged and grew at rates of up to 55 micro m s(-1); the rate then slowed to around 2 micro m s(-1), 30 s after the initial growth spurt. Tubes were observed to grow in pulses, and the pulsed growth continued in the presence of calcium channel blockers. Optimal sugar concentration for pollen germination was 300 g L(-1), in which up to 81 % of pollen grains showed fast germination. Germination and emergence of multiple tubes were observed in sucrose concentrations of 100-800 g L(-1). The vegetative and generative nuclei moved into one of the tubes. Multiple tubes from a single grain were observed on the stigma. Under light microscopy, the cytoplasm in the tube showed a clear region at the tip. The ultrastructure of C. amoenum pollen showed a bilayered exine, with the intine being very thick at the pores, and elsewhere having large intrusions into the plasma membrane. The cytoplasm was dense with vesicles packed with inner tube cell wall material. Golgi apparatus producing secretory vesicles, and mitochondria were found throughout the tube. The tube wall was bilayered; both layers being fibrous and loosely packed. CONCLUSIONS: It is proposed that, for Conospermum, initial pollen tube wall constituents are manufactured and stored prior to pollen germination, and that tube extension occurs as described in the literature for other species, but at an exceptionally fast rate.     

内钙拮抗剂TMB-8对白皮松花粉管细胞壁构建的影响

应用荧光显微技术、激光共聚焦扫描显微技术、单克隆抗体免疫荧光标记技术以及傅里叶变换显微红外光谱分析(FTIR)等手段,研究了内钙拮抗剂TMB-8对白皮松花粉管胞内Ca2+分布、花粉管生长以及细胞肇构建等的影响.结果表明,白皮松花粉管经TMB-8处理后,胞内的Ca2+浓度下降,花粉管内典型的Ca2+浓度梯度消失,花粉萌发...     

Cellular oscillations and the regulation of growth: the pollen tube paradigm

The occurrence of oscillatory behaviours in living cells can be viewed as a visible consequence of stable, regulatory homeostatic cycles. Therefore, they may be used as experimental windows on the underlying physiological mechanisms. Recent studies show that growing pollen tubes are an excellent biological model for these purposes. They unite experimental simplicity with clear oscillatory patterns of both structural and temporal features, most being measurable during real-time in live cells. There is evidence that these cellular oscillators involve an integrated input of plasma membrane ion fluxes, and a cytosolic choreography of protons, calcium and, most likely, potassium and chloride. In turn, these can create positive feedback regulation loops that are able to generate and self-sustain a number of spatial and temporal patterns. Other features, including cell wall assembly and rheology, turgor, and the cytoskeleton, play important roles and are targets or modulators of ion dynamics. Many of these features have similarities with other cell types, notably with apical-growing cells. Pollen tubes may thus serve as a powerful model for exploring the basis of cell growth and morphogenesis. BioEssays 23:86-94, 2001.     

Pectin methylesterase, a regulator of pollen tube growth

The apical wall of growing pollen tubes must be strong enough to withstand the internal turgor pressure, but plastic enough to allow the incorporation of new membrane and cell wall material to support polarized tip growth. These essential rheological properties appear to be controlled by pectins, which constitute the principal component of the apical cell wall. Pectins are secreted as methylesters and subsequently deesterified by the enzyme pectin methylesterase (PME) in a process that exposes acidic residues. These carboxyls can be cross-linked by calcium, which structurally rigidifies the cell wall. Here, we examine the role of PME in cell elongation and the regulation of its secretion and enzymatic activity. Application of an exogenous PME induces thickening of the apical cell wall and inhibits pollen tube growth. Screening a Nicotiana tabacum pollen cDNA library yielded a pollen-specific PME, NtPPME1, containing a pre-region and a pro-region. Expression studies with green fluorescent protein fusion proteins show that the pro-region participates in the correct targeting of the mature PME. Results from in vitro growth analysis and immunolocalization studies using antipectin antibodies (JIM5 and JIM7) provide support for the idea that the pro-region acts as an intracellular inhibitor of PME activity, thereby preventing premature deesterification of pectins. In addition to providing experimental data that help resolve the significance and function of the pro-region, our results give insight into the mechanism by which PME and its pro-region regulate the cell wall dynamics of growing pollen tubes.     

Role of Wall-bound β-Glucanases in Regulating Tip-growth of Lilium longiflorum Pollen Tubes

β-Glucanases were found in the cell wall of Lilium longiflorum Thunb. pollen tubes grown in vitro . The activity of β-glucanases was, in a certain extent, decreased by nojirimycin, an inhibitor of glucosidase. Pollen germination percentage reduced dramatically when nojirimycin was applied in the culture medium. In case that nojirimycin was added at 0 or 1 h after the onset of incubation, the inhibition rate was 99.6% and 91.4%, respectively. When 3 mmol/L of nojirimycin was applied in the liquid medium at 0, 1, 1.5 and 2 h after the onset of incubation, the growth of pollen tubes was interrupted, which resulted in the morphological change of the pollen tubes such as the newly grown portion of pollen tubes being bent, curved and swollen. Tracing the growth pattern of the individual pollen tube grown in semi-solid medium by video microscopy, the authors demonstrated that pollen tube growth rate was strongly inhibited by nojirimycin at concentrations ranged from 0.003 to 3 mmol/L. Moreover, the cytoplasmic arrangement and the morphology of the pollen tubes were also affected by nojirimycin. The growth inhibition brought about by nojirimycin was reversible. These results indicated that β-glucanases, which degrade 1,3-β-glucan and/or 1,4-β-glucan or 1,3:1,4-β-glucan constructed in the cell wall, are involved in pollen germination and pollen tube growth. It provides new insight into an understanding of the contribution of β-glucanases to the cell wall extensibility and the crucial role of cell wall in regards to the regulation of pollen tube growth.     

The block of intracellular calcium release affects the pollen tube development of Picea wilsonii by changing the deposition of cell wall components

Two potent drugs, neomycin and TMB-8, which can block intracellular calcium release, were used to investigate their influence on pollen tube growth and cell wall deposition in Picea wilsonii. Apart from inhibiting pollen germination and pollen tube growth, the two drugs largely influenced tube morphology. The drugs not only obviously disturbed the generation and maintenance of the tip-localized Ca(2+) gradient but also led to a heavy accumulation of callose at the tip region of P. wilsonii pollen tubes. Fourier transform infrared (FTIR) spectroscopy analysis showed that the deposition of cell wall components, such as carboxylic acid, pectins, and other polysaccharides, in pollen tubes was changed by the two drugs. The results obtained from immunolabeling with different pectin and arabinogalactan protein antibodies agreed well with the FTIR results and further demonstrated that the generation and maintenance of the gradient of cross-linked pectins, as well as the proportional distribution of arabinogalactan proteins in tube cell walls, are essential for pollen tube growth. These results strongly suggest that intracellular calcium release mediates the processes of pollen germination and pollen tube growth in P. wilsonii and its inhibition can lead to abnormal growth by disturbing the deposition of cell wall components in pollen tube tips.     

An actin-binding protein, LlLIM1, mediates calcium and hydrogen regulation of actin dynamics in pollen tubes

Actin microfilaments are crucial for polar cell tip growth, and their configurations and dynamics are regulated by the actions of various actin-binding proteins (ABPs). We explored the function of a lily (Lilium longiflorum) pollen-enriched LIM domain-containing protein, LlLIM1, in regulating the actin dynamics in elongating pollen tube. Cytological and biochemical assays verified LlLIM1 functioning as an ABP, promoting filamentous actin (F-actin) bundle assembly and protecting F-actin against latrunculin B-mediated depolymerization. Overexpressed LlLIM1 significantly disturbed pollen tube growth and morphology, with multiple tubes protruding from one pollen grain and coaggregation of FM4-64-labeled vesicles and Golgi apparatuses at the subapex of the tube tip. Moderate expression of LlLIM1 induced an oscillatory formation of asterisk-shaped F-actin aggregates that oscillated with growth period but in different phases at the subapical region. These results suggest that the formation of LlLIM1-mediated overstabilized F-actin bundles interfered with endomembrane trafficking to result in growth retardation. Cosedimentation assays revealed that the binding affinity of LlLIM1 to F-actin was simultaneously regulated by both pH and Ca(2+): LlLIM1 showed a preference for F-actin binding under low pH and low Ca(2+) concentration. The potential functions of LlLIM1 as an ABP sensitive to pH and calcium in integrating endomembrane trafficking, oscillatory pH, and calcium circumstances to regulate tip-focused pollen tube growth are discussed.     

Sucrose synthase is associated with the cell wall of tobacco pollen tubes

Sucrose synthase (Sus; EC 2.4.1.13) is a key enzyme of sucrose metabolism in plant cells, providing carbon for respiration and for the synthesis of cell wall polymers and starch. Since Sus is important for plant cell growth, insights into its structure, localization, and features are useful for defining the relationships between nutrients, growth, and cell morphogenesis. We used the pollen tube of tobacco (Nicotiana tabacum) as a cell model to characterize the main features of Sus with regard to cell growth and cell wall synthesis. Apart from its role during sexual reproduction, the pollen tube is a typical tip-growing cell, and the proper construction of its cell wall is essential for correct shaping and direction of growth. The outer cell wall layer of pollen tubes consists of pectins, but the inner layer is composed of cellulose and callose; both polymers require metabolic precursors in the form of UDP-glucose, which is synthesized by Sus. We identified an 88-kD polypeptide in the soluble, plasma membrane and Golgi fraction of pollen tubes. The protein was also found in association with the cell wall. After purification, the protein showed an enzyme activity similar to that of maize (Zea mays) Sus. Distribution of Sus was affected by brefeldin A and depended on the nutrition status of the pollen tube, because an absence of metabolic sugars in the growth medium caused Sus to distribute differently during tube elongation. Analysis by bidimensional electrophoresis indicated that Sus exists as two isoforms, one of which is phosphorylated and more abundant in the cytoplasm and cell wall and the other of which is not phosphorylated and is specific to the plasma membrane. Results indicate that the protein has a role in the construction of the extracellular matrix and thus in the morphogenesis of pollen tubes.