How do genes make teeth to order through development?

This introduction to new patterning theories for the vertebrate dentition outlines the historical concepts to explain graded sequences in tooth shape in mammals (incisors, canines, premolars, molars) which change in evolution in a linked manner, constant for each region. The classic developmental models for shape regulation, known as the 'regional field' and 'dental clone' models, were inspired by the human dentition, where it is known that the last tooth in each series is the one commonly absent. The mouse, as a valuable experimental model, has provided data to test these models and more recently, based on spatial-temporal gene expression data, the 'dental homeobox code' was proposed to specify regions and regulate tooth shape. We have attempted to combine these hypotheses in a new model of the combinatorial homeobox gene expression pattern with the clone and field theories in one of 'co-operative genetic interaction'. This also explains the genetic absence of teeth in humans ascribed to point mutations in mesenchymally expressed genes, which affect tooth number in each series.     

Pattern of structural differentiation in the optic nerve of trout (Salmo gairdneri)

Summary The development of the trout optic nerve is quantitatively described from early ontogenesis into adulthood. The nerve is oval in cross section until stage 34, thereafter the formation of vertically aligned parallel folds can be observed and thus the unique shape of a folded ribbon is gradually attained. Quantitative measurements revealed a linear increase in cross sectional area, caused in part by the formation of new folds and in part by an increase in size of the preexisting ones. We attribute the continuous expansion of individual folds to an increase in fiber size subsequent to myelination rather than to the addition of new fibers. The total number of glial cells increased concomitantly per fold.Myelinogenesis starst at stage 33 with the ensheathement of axons beginning at the dorsal edge of the primary fold and follows a highly ordered pattern throughout development, strictly succeeding neural outgrowth. The functional significance of this pattern is discussed.     

Choroidal folds in association with optic disc drusen

Choroidal folds are undulations in Bruch's membrane, the retinal pigment epithelium and possibly the outer retina. They can result from any intra- or extraocular process that induces sufficient compressive stress within the choroid, Bruch's membrane and retina to force these tissues to buckle. Numerous ocular as well as systemic conditions have been associated with choroidal fold formation. Presented for discussion is a patient with unilateral choroidal folds and optic disc drusen. Arguments both for and against a direct association between the two conditions are made. Emphasis is placed on the differential diagnosis, clinical evaluation, etiology and management of choroidal folds.     

Edar/Eda interactions regulate enamel knot formation in tooth morphogenesis

tabby and downless mutant mice have apparently identical defects in teeth, hair and sweat glands. Recently, genes responsible for these spontaneous mutations have been identified. downless (Dl) encodes Edar, a novel member of the tumour necrosis factor (TNF) receptor family, containing the characteristic extracellular cysteine rich fold, a single transmembrane region and a death homology domain close to the C terminus. tabby (Ta) encodes ectodysplasin-A (Eda) a type II membrane protein of the TNF ligand family containing an internal collagen-like domain. As predicted by the similarity in adult mutant phenotype and the structure of the proteins, we demonstrate that Eda and Edar specifically interact in vitro. We have compared the expression pattern of Dl and Ta in mouse development, taking the tooth as our model system, and find that they are not expressed in adjacent cells as would have been expected. Teeth develop by a well recorded series of epithelial-mesenchymal interactions, similar to those in hair follicle and sweat gland development, the structures found to be defective in tabby and downless mice. We have analysed the downless mutant teeth in detail, and have traced the defect in cusp morphology back to initial defects in the structure of the tooth enamel knot at E13. Significantly, the defect is distinct from that of the tabby mutant. In the tabby mutant, there is a recognisable but small enamel knot, whereas in the downless mutant the knot is absent, but enamel knot cells are organised into a different shape, the enamel rope, showing altered expression of signalling factors (Shh, Fgf4, Bmp4 and Wnt10b). By adding a soluble form of Edar to tooth germs, we were able to mimic the tabby enamel knot phenotype, demonstrating the involvement of endogenous Eda in tooth development. We could not, however, reproduce the downless phenotype, suggesting the existence of yet another ligand or receptor, or of ligand-independent activation mechanisms for Edar. Changes in the structure of the enamel knot signalling centre in downless tooth germs provide functional data directly linking the enamel knot with tooth cusp morphogenesis. We also show that the Lef1 pathway, thought to be involved in these mutants, functions independently in a parallel pathway.     

Sonic hedgehog regulates growth and morphogenesis of the tooth

During mammalian tooth development, the oral ectoderm and mesenchyme coordinate their growth and differentiation to give rise to organs with precise shapes, sizes and functions. The initial ingrowth of the dental epithelium and its associated dental mesenchyme gives rise to the tooth bud. Next, the epithelial component folds to give the tooth its shape. Coincident with this process, adjacent epithelial and mesenchymal cells differentiate into enamel-secreting ameloblasts and dentin-secreting odontoblasts, respectively. Growth, morphogenesis and differentiation of the epithelium and mesenchyme are coordinated by secreted signaling proteins. Sonic hedgehog (Shh) encodes a signaling peptide which is present in the oral epithelium prior to invagination and in the tooth epithelium throughout its development. We have addressed the role of Shh in the developing tooth in mouse by using a conditional allele to remove Shh activity shortly after ingrowth of the dental epithelium. Reduction and then loss of Shh function results in a cap stage tooth rudiment in which the morphology is severely disrupted. The overall size of the tooth is reduced and both the lingual epithelial invagination and the dental cord are absent. However, the enamel knot, a putative organizer of crown formation, is present and expresses Fgf4, Wnt10b, Bmp2 and Lef1, as in the wild type. At birth, the size and the shape of the teeth are severely affected and the polarity and organization of the ameloblast and odontoblast layers is disrupted. However, both dentin- and enamel-specific markers are expressed and a large amount of tooth-specific extracellular matrix is produced. This observation was confirmed by grafting studies in which tooth rudiments were cultured for several days under kidney capsules. Under these conditions, both enamel and dentin were deposited even though the enamel and dentin layers remained disorganized. These studies demonstrate that Shh regulates growth and determines the shape of the tooth. However, Shh signaling is not essential for differentiation of ameloblasts or odontoblasts.     

Towards protein tertiary fold prediction using distance and motif constraints

Based on a simplified model of the all-alpha class of protein, all packing arrangements of alpha-helices were generated and assessed by both general and specific structural rules. The method was applied to myoglobin and parvalbumin, which were both ranked in the top 4% of folds under the general packing constraints. Incorporation of the restrictions implied by the EF-hand motifs of parvalbumin were sufficient to select the correct fold as one of two (equal scoring) possibilities. Myoglobin scored well under the general packing constraints and the addition of a single distance constraint, implied by haem binding, was sufficient to select the correct fold as one of several candidates. Incorporation of a score for complementary hydrophobic packing between helices further selected myoglobin as a unique fold but did not improve the ranking of parvalbumin. For both proteins, the alpha-helices were predicted from multiply aligned sequences using pattern-matching methods and no specific aspect of the known X-ray structures influenced this or the prediction of the correct folds. Although the method is currently of limited generality, its further applications and extension to a more detailed structural level are discussed.     

Monte Carlo estimation of the number of possible protein folds: effects of sampling bias and folds distributions

The estimation of the number of protein folds in nature is a matter of considerable interest. In this study, a Monte Carlo method employing the broken stick model is used to assign a given number of proteins into a given number of folds. Subsequently, random, integer, non-repeating numbers are generated in order to simulate the process of fold discovery. With this conceptual framework at hand, the effects of two factors upon the fold identification process were investigated: (1) the nature of folds distributions and (2) preferential sampling bias of previously identified folds. Depending on the type of distribution, dividing 100,000 proteins into 1,000 folds resulted in 10-30% of the folds having 10 proteins or less per fold, approximately 10% of the folds having 10-20 proteins per fold, 31-45% having 20-100 proteins per fold, and >30% of the folds having more than 100 proteins per fold. After randomly sampling one tenth of the proteins, 68-96% of the folds were identified. These percentages depend both on folds distribution and biased/non-biased sampling. Only upon increasing the sampling bias for previously identified folds to 1,000, did the model result in a reduction of the number of proteins identified by an order of magnitude (approximately 9%). Thus, assuming the structures of one tenth of the population of proteins in nature have been solved, the results of the Monte Carlo simulation are more consistent with recent lower estimates of the number of folds, 相似文献   

不同胁迫条件下化感与非化感水稻PAL多基因家族的差异表达

水稻苯丙氨酸解氨酶(PAL)调控酚酸类化感物质的合成代谢。编码PAL的基因是一个基因家族,包含至少11个基因成员,并受不同环境条件的调控。为了明确PAL基因家族中调控水稻化感作用的特定基因成员,本研究运用实时荧光定量PCR技术分析了低氮及稗草胁迫条件下强化感水稻PI312777与非化感水稻Lemont中根系的11个PAL成员基因的表达差异。结果表明,低氮和稗草胁迫条件下,PI312777和Lemont中的 PAL4和PAL10均不表达,其余9个PAL基因成员发生了不同程度的表达变化。其中,PAL11均上调表达,其分别在低氮处理和稗草胁迫的PI312777中上调3.29倍和1.07倍,而在相同处理下的Lemont中上调3.92倍和1.08倍;PAL3和PAL9则仅在低氮和稗草胁迫条件下的PI312777中上调表达,低氮胁迫分别为1.83倍和2.66倍,稗草胁迫为1.46倍和2.65倍;而这两个基因在相同处理下的Lemont中表达下调,低氮胁迫下调1.05和1.24倍,稗草胁迫下调1.14和1.16倍,推测PAL3和PAL9可能与胁迫初期调控水稻化感作用有关。     

Estimating the prevalence of protein sequences adopting functional enzyme folds

Proteins employ a wide variety of folds to perform their biological functions. How are these folds first acquired? An important step toward answering this is to obtain an estimate of the overall prevalence of sequences adopting functional folds. Since tertiary structure is needed for a typical enzyme active site to form, one way to obtain this estimate is to measure the prevalence of sequences supporting a working active site. Although the immense number of sequence combinations makes wholly random sampling unfeasible, two key simplifications may provide a solution. First, given the importance of hydrophobic interactions to protein folding, it seems likely that the sample space can be restricted to sequences carrying the hydropathic signature of a known fold. Second, because folds are stabilized by the cooperative action of many local interactions distributed throughout the structure, the overall problem of fold stabilization may be viewed reasonably as a collection of coupled local problems. This enables the difficulty of the whole problem to be assessed by assessing the difficulty of several smaller problems. Using these simplifications, the difficulty of specifying a working beta-lactamase domain is assessed here. An alignment of homologous domain sequences is used to deduce the pattern of hydropathic constraints along chains that form the domain fold. Starting with a weakly functional sequence carrying this signature, clusters of ten side-chains within the fold are replaced randomly, within the boundaries of the signature, and tested for function. The prevalence of low-level function in four such experiments indicates that roughly one in 10(64) signature-consistent sequences forms a working domain. Combined with the estimated prevalence of plausible hydropathic patterns (for any fold) and of relevant folds for particular functions, this implies the overall prevalence of sequences performing a specific function by any domain-sized fold may be as low as 1 in 10(77), adding to the body of evidence that functional folds require highly extraordinary sequences.     

Determination of genes involved in the early process of molar root development initiation in rat by modified subtractive hybridization

Rat molars and incisors have different root patterning mechanisms: the former form a multirooted pattern while the latter form a single-rooted analogue. But the genetic signals that control root patterning are poorly understood. In this study, to identify the special molecular signals which may lead to the molar root development, we firstly observed that at embryonic day 19 the molar and the incisor began differentially developing: the molar formed double-layered cells of the root sheath while the incisor formed a cervical loop. By using the subtractive hybridization method, we successfully constructed a subtraction cDNA library of the rat molar and incisor tissues. Differentially expressed gene clones were evaluated by dot-blot and sequencing. Sel1l, Nfic, Edar, GATA6, and some novel genes were found differentially expressed, which were strongly related the tooth root patterning. It is anticipated that further study of genes identified will provide insights into their specific roles in the tooth root patterning.     

Geometry of human vocal folds and glottal channel for mathematical and biomechanical modeling of voice production

Current models of the vocal folds derive their shape from approximate information rather than from exactly measured data. The objective of this study was to obtain detailed measurements on the geometry of human vocal folds and the glottal channel in phonatory position. A non-destructive casting methodology was developed to capture the vocal fold shape from excised human larynges on both medial and superior surfaces. Two female larynges, each in two different phonatory configurations corresponding to low and high fundamental frequency of the vocal fold vibrations, were measured. A coordinate measuring machine was used to digitize the casts yielding 3D computer models of the vocal fold shape. The coronal sections were located in the models, extracted and fitted by piecewise-defined cubic functions allowing a mathematical expression of the 2D shape of the glottal channel. Left-right differences between the cross-sectional shapes of the vocal folds were found in both the larynges.     

Automated discovery of structural signatures of protein fold and function

There are constraints on a protein sequence/structure for it to adopt a particular fold. These constraints could be either a local signature involving particular sequences or arrangements of secondary structure or a global signature involving features along the entire chain. To search systematically for protein fold signatures, we have explored the use of Inductive Logic Programming (ILP). ILP is a machine learning technique which derives rules from observation and encoded principles. The derived rules are readily interpreted in terms of concepts used by experts. For 20 populated folds in SCOP, 59 rules were found automatically. The accuracy of these rules, which is defined as the number of true positive plus true negative over the total number of examples, is 74% (cross-validated value). Further analysis was carried out for 23 signatures covering 30% or more positive examples of a particular fold. The work showed that signatures of protein folds exist, about half of rules discovered automatically coincide with the level of fold in the SCOP classification. Other signatures correspond to homologous family and may be the consequence of a functional requirement. Examination of the rules shows that many correspond to established principles published in specific literature. However, in general, the list of signatures is not part of standard biological databases of protein patterns. We find that the length of the loops makes an important contribution to the signatures, suggesting that this is an important determinant of the identity of protein folds. With the expansion in the number of determined protein structures, stimulated by structural genomics initiatives, there will be an increased need for automated methods to extract principles of protein folding from coordinates.     

Pinching and pushing: fold formation in the Drosophila dorsal epidermis

Epithelial folding is a fundamental morphogenetic process that shapes planar epithelial sheets into complex three-dimensional structures. Multiple mechanisms can generate epithelial folds, including apical constriction, which acts locally at the cellular level, differential growth on the tissue scale, or buckling because of compression from neighboring tissues. Here, we investigate the formation of dorsally located epithelial folds at segment boundaries during the late stages of Drosophila embryogenesis. We found that the fold formation at the segment boundaries occurs through the juxtaposition of two key morphogenetic processes: local apical constriction and tissue-level compressive forces from posterior segments. Further, we found that epidermal spreading and fold formation are accompanied by spatiotemporal pulses of Hedgehog (Hh) signaling. A computational model that incorporates the local forces generated from the differential tensions of the apical, basal, and lateral sides of the cell and active forces generated within the whole tissue recapitulates the overall fold formation process in wild-type and Hh overexpression conditions. In sum, this work demonstrates how epithelial folding depends on multiple, separable physical mechanisms to generate the final morphology of the dorsal epidermis. This work illustrates the modularity of morphogenetic unit operations that occur during epithelial morphogenesis.     

Molecular responses of rat tracheal epithelial cells to transmembrane pressure

Smooth muscle constriction in asthma causes the airway to buckle into a rosette pattern, folding the epithelium into deep crevasses. The epithelial cells in these folds are pushed up against each other and thereby experience compressive stresses. To study the epithelial cell response to compressive stress, we subjected primary cultures of rat tracheal epithelial cells to constant elevated pressures on their apical surface (i.e., a transmembrane pressure) and examined changes in the expression of genes that are important for extracellular matrix production and maintenance of smooth muscle activation. Northern blot analysis of RNA extracted from cells subjected to transmembrane pressure showed induction of early growth response-1 (Egr-1), endothelin-1, and transforming growth factor-beta1 in a pressure-dependent and time-dependent manner. Increases in Egr-1 protein were detected by immunohistochemistry. Our results demonstrate that airway epithelial cells respond rapidly to compressive stresses. Potential transduction mechanisms of transmembrane pressure were also investigated.     

A quantitative genetic analysis of male sexual traits distinguishing the sibling species Drosophila simulans and D. sechellia

A quantitative trait locus (QTL) genetic analysis of morphological and reproductive traits distinguishing the sibling species Drosophila simulans and D. sechellia was carried out in a backcross design, using 38 markers with an average spacing of 8.4 cM. The direction of QTL effects for the size of the posterior lobe was consistent across the identified QTL, indicating directional selection for this trait. Directional selection also appears to have acted on testis length, indicating that sexual selection may have influenced many reproductive traits, although other forms of directional selection cannot be ruled out. Sex comb tooth number exhibited high levels of variation both within and among isofemale lines and showed no evidence for directional selection and, therefore, may not have been involved in the early speciation process. A database search for genes associated with significant QTL revealed a set of candidate loci for posterior lobe shape and size, sex comb tooth number, testis length, tibia length, and hybrid male fertility. In particular, decapentaplegic (dpp), a gene known to influence the genital arch, was found to be associated with the largest LOD peak for posterior lobe shape and size.     

Fold usage on genomes and protein fold evolution

We review fold usage on completed genomes to explore protein structure evolution. The patterns of presence or absence of folds on genomes gives us insights into the relationships between folds, the age of different folds and how we have arrived at the set of folds we see today. We examine the relationships between different measures which describe protein fold usage, such as the number of copies of a fold per genome, the number of families per fold, and the number of genomes a fold occurs on. We obtained these measures of fold usage by searching for the structural domains on 157 completed genome sequences from all three kingdoms of life. In our comparisons of these measures we found that bacteria have relatively more distinct folds on their genomes than archaea. Eukaryotes were found to have many more copies of a fold on their genomes. If we separate out the different fold classes, the alpha/beta class has relatively fewer distinct folds on large genomes, more copies of a fold on bacteria and more folds occurring in all three kingdoms simultaneously. These results possibly indicate that most alpha/beta folds originated earlier than other folds. The expected power law distribution is observed for copies of a fold per genome and we found a similar distribution for the number of families per fold. However, a more complicated distribution appears for fold occurrence across genomes, which strongly depends on fold class and kingdom. We also show that there is not a clear relationship between the three measures of fold usage. A fold which occurs on many genomes does not necessarily have many copies on each genome. Similarly, folds with many copies do not necessarily have many families or vice versa.     

The tooth of perfection: functional and spatial constraints on mammalian tooth shape

This paper addresses the question of how close mammalian teeth are to ideal functional forms. An 'ideal' form is a morphology predicted to be the best functional shape according to information of the relationships between shape and function. Deviations from an ideal form are likely to indicate the presence of developmental or genetic constraints on form. Model tools were constructed to conform to functional principles from engineering and dental studies. The final model shapes are very similar to several mammalian tooth forms (carnassial teeth and tribosphenic-like cusps), suggesting that these tooth forms very closely approach ideal functional forms. Further evidence that these tooth forms are close to ideal comes from the conservation over 140 million years, the independent derivation and/or the occurrence over a size range of several orders of magnitude of these basic tooth forms. One of the main functional shapes derived here is the 'protoconoid', a fundamental design for double-bladed tools that fits a large number of functional parameters. This shape occurs in tooth forms such as tribosphenic, dilambdodont and zalambdodont. This study extends our understanding of constraints on tooth shape in terms of geometry (how space influences tooth shape) and function (how teeth divide food).  © 2003 The Linnean Society of London . Biological Journal of the Linnean Society , 2003, 78 , 173–191.