Carboxy-terminal sequencing: formation and hydrolysis of C-terminal peptidylthiohydantoins

Proteins and peptides can be sequenced from the carboxy terminus with isothiocyanate reagents to produce amino acid thiohydantoin derivatives. Previous studies in our laboratory indicated that the use of trimethylsilyl isothiocyanate (TMS-ITC) as a coupling reagent significantly improved the yields and reaction conditions and reduced the number of complicating side products [Hawke et al. (1987) Anal. Biochem. 166, 298]. The present study further explores the conditions for formation of the peptidylthiohydantoins by TMS-ITC and examines the cleavage of these peptidylthiohydantoin derivatives into a shortened peptide and thiohydantoin amino acid derivative. Schizophrenia-related peptide (Thr-Val-Leu) was used as a model peptide and was treated with acetic anhydride and TMS-ITC at 50 degrees C for 30 min, and the peptidylthiohydantoin derivatives were isolated by reverse-phase HPLC and characterized by FAB-MS. The purified derivatives were subjected to a variety of cleavage conditions, and rate constants for hydrolysis were determined. Hydrolysis with acetohydroxamate as reported originally by Stark [(1968) Biochemistry 7, 1796] was found to give excellent cleavage of the terminal thiohydantoin amino acid, but also led to the formation of stable hydroxamate esters of the shortened peptide which are poorly suited for subsequent rounds of degradation. Hydrolysis with 2% aqueous triethylamine under mild conditions (1-5 min at 50 degrees C) was found to be more suitable for carboxy-terminal sequence analysis by the thiocyanate method. The shortened peptide, which could be isolated and subjected to a second round of degradation, and the released thiohydantoin amino acid are formed in good yield (90-100%). Several other small peptides containing 15 different C-terminal amino acid side chains were also investigated in order to examine any interfering reactions that might occur when these side chains are encountered in a stepwise degradation using the thiocyanate chemistry. Quantitative yields of peptidylthiohydantoins were obtained for all the amino acids examined with the following exceptions: low yields were obtained for C-terminal Glu or Thr, and no peptidylthiohydantoins were obtained for C-terminal Pro or Asp. Asparagine was found to form cyclic imides (64%) at the penultimate position (C-2) during hydrolysis of the peptidylthiohydantoins by 2% aqueous triethylamine. Cleavage of C-terminal Asn under these conditions led to the formation of the expected shortened peptide (69%), but also to the formation of a shortened peptide (31%) with a C-terminal amide. Problems with Glu and Thr could be solved by minimizing the reaction time with acetic anhydride.(ABSTRACT TRUNCATED AT 400 WORDS)     

C-terminal sequencing method for peptides and proteins by the reaction with a vapor of perfluoric acid in acetic anhydride

A successive C-terminal amino acid truncation reaction of peptides and proteins with a vapor generated from a low-concentrated perfluoric acid in acetic anhydride is presented. The reaction products were analyzed with matrix-assisted laser desorption/ionization-time of flight mass-spectrometry giving molecular mass ions of the C-terminal truncated peptides or proteins from which the C-terminal sequence information can be deduced. Acetylation reaction preceded the truncation reaction in order to protect the amino groups and other reactive groups in peptides and proteins, and after the truncation reaction, hydration reaction was carried out to afford cleaner mass spectra.     

Solid-phase C-terminal sequencing of peptides

Summary C-terminal amino acid sequence analysis seemed to be established procedure, as the counterpart of Edman's N-terminal sequencing method. However, poor recovery of the C-terminal amino acids in the reaction in homogeneous solution suggested further improvement of the method. In the present study, N-terminal amino acid was fixed covalently to the controlled pore glass (CPG) beads and the C-terminal amino acid was activated (by treating with acetic anhydride), coupled with thiocyanate to form thiohydantoin (TH) ring at the C-terminus. Then, the C-terminal amino acid was split off as the corresponding TH derivative, and analyzed by HPLC. Hydrolysis of the TH derivative was achieved at 60°C in the presence of 2 M HC1 for 2 h. Solid phase fixed peptide was washed simply with acetone, and dried for the next cycle of the reaction. So far obtained results in the heterogeneous mixture are not satisfactory in terms of the recovery of the C-terminal TH, and improvement of the recovery and further steps are under progress.     

Carboxylic acid-modified polyethylene: a novel support for the covalent immobilization of polypeptides for C-terminal sequencing.

We have developed a method for the covalent immobilization of peptides, for the purpose of C-terminal sequencing, to a novel solid support, carboxylic acid-modified polyethylene (PE-COOH) film. The peptides are attached by coupling the N-terminal amino group to the activated carboxyl groups of the film. Reagents for carboxyl group activation, including 1,3-dicyclohexylcarbodiimide (DCC), 1,1'-carbonyldiimidazole (CDI), 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC), benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate (BOP), and 1,3-diisopropylcarbodiimide (DICD) were compared. The best yields were obtained with DCC for a variety of tested peptides and averaged approximately 50%. The covalent attachment at pH 6.7 of peptides was shown to occur predominantly thorough the alpha-amino group for the peptide, SIGSLAK, which after attachment to the PE-COOH support permitted the C-terminal lysine residue to be sequenced in good yield, indicating that the epsilon-amino group of lysine is not covalently attached. This support offers a number of advantages over other solid supports, such as silica and polyvinylidene difluoride, for C-terminal sequencing including (1) stability to base and the high temperatures (65 degrees C) employed for C-terminal sequencing, (2) wettability with both aqueous and organic solvents, (3) a high capacity (1.6 nmol/mm2) for covalent coupling of polypeptides, and (4) easy divisibility into 1 x 5-mm pieces for use in our continuous flow reactor (CFR), which is also used for automated N-terminal sequencing (Shively, J.E., Miller, P., & Ronk, M., 1987, Anal. Biochem. 163, 517-529). Automated C-terminal sequencing on these supports is described in the companion paper (Bailey, J.M., Shenoy, N.R., Ronk, M., & Shively, J.E., 1992, Protein Sci. 1, 68-80).     

Derivatization of peptides as quaternary ammonium salts for sensitive detection by ESI‐MS

A series of model peptides in the form of quaternary ammonium salts at the N‐terminus was efficiently prepared by the solid‐phase synthesis. Tandem mass spectrometric analysis of the peptide quaternary ammonium derivatives was shown to provide sequence confirmation and enhanced detection. We designed the 2‐(1,4‐diazabicyclo[2.2.2] octylammonium)acetyl quaternary ammonium group which does not suffer from neutral losses during MS/MS experiments. The presented quaternization of 1,4‐diazabicyclo[2.2.2]octane (DABCO) by iodoacetylated peptides is relatively easy and compatible with standard solid‐phase peptide synthesis. This methodology offers a novel sensitive approach to analyze peptides and other compounds. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Design, synthesis, and characterization of a protein sequencing reagent yielding amino acid derivatives with enhanced detectability by mass spectrometry.

We report the design, chemical synthesis, and structural and functional characterization of a novel reagent for protein sequence analysis by the Edman degradation, yielding amino acid derivatives rapidly detectable at high sensitivity by ion-evaporation mass spectrometry. We demonstrate that the reagent 3-[4'(ethylene-N,N,N-trimethylamino)phenyl]-2-isothiocyanate is chemically stable and shows coupling and cyclization/cleavage yields comparable to phenylisothiocyanate, the standard reagent in chemical sequence analysis, under conditions typically encountered in manual or automated sequence analysis. Amino acid derivatives generated with this reagent were detectable by ion-evaporation mass spectrometry at the subfemtomole sensitivity level at a pace of one sample per minute. Furthermore, derivatives were identified by their mass, thus permitting the rapid and highly sensitive determination of the molecular nature of modified amino acids. Derivatives of amino acids with acidic, basic, polar, or hydrophobic side chains were reproducibly detectable at comparable sensitivities. The polar nature of the reagent required covalent immobilization of polypeptides prior to automated sequence analysis. This reagent, used in automated sequence analysis, has the potential for overcoming the limitations in sensitivity, speed, and the ability to characterize modified amino acid residues inherent in the chemical sequencing methods that are currently used.     

C-terminal sequencing by mass spectrometry: application to gelatine-derived proline-rich peptides

Protonated peptides derived from proline‐rich proteins (PRP) are often difficult to sequence by standard collision‐induced dissociation (CID) mass spectrometry (MS) due to preferential amide bond cleavage N‐terminal to proline. In connection with bovine spongiform encephalopathy regulations, proteolytic products derived from the PRP collagen have been suggested as markers for contamination of animal feedstuffs with processed animal protein (Fernandez Ocaña, M. et al., Analyst 2004, 129, 111–115). Herein, we report the identification of these marker peptides using the strategy of C‐terminal sequencing by CID MS from their sodium and lithium adducts. Upon fragmentation a new cationized peptide was produced that is one C‐terminal amino acid shorter in length. This dissociation pathway allowed for the facile identification of the C‐terminal residue by matrix‐assisted laser desorption/ionization tandem time‐of‐flight mass spectrometry. Each newly formed cationized peptide was further fragmented by up to seven stages of electrospray ionization ion trap MS. Proline‐rich C‐terminal sequence tags were established which permitted successful database identification of collagen alpha type I proteins.     

C-terminal de novo sequencing of peptides using oxazolone-based derivatization with bromine signature

Due to almost identical chemical properties of C-terminal and side-chain carboxylic groups, selective C-terminal derivatization has been difficult. Although oxazolone-based C-terminal derivatization is the only selective C-terminal modification available, it has not been used widely because of its low derivatization efficiency. In this paper, an improved oxazolone chemistry for incorporation of Br signature to C-terminus is reported. MS/MS analysis of the brominated peptides led to a series of y ions with Br signature, facilitating de novo C-terminal sequencing.     

Elucidation of the primary structures of the cockroach hyperglycaemic hormones I and II using enzymatic techniques and gas-phase sequencing

ABSTRACT. Two peptides, HGHI and HGHII, both inducing hyperglycaemia and activation of fat body glycogen phosphorylase can be isolated from the corpora cardiaca of the American cockroach, Periplaneta americana , using high-performance liquid chromatography. Both peptides are N-terminally blocked by a pyroglutamate residue and are thus not available for sequencing methods using the Edman degradation as this technique requires a free N-terminus. The blocked peptides were treated with pyroglutamate aminopeptidase to cleave the pyroglutamate residue, and the C-terminus of each peptide is also blocked and neither molecule can be cleaved by carboxypeptidase A. The following sequences for hyperglycaemic hormones HGHI and HGHII have been revealed using gas-phase sequencing.
HGHI pGlu-Val-Asn-Phe-Ser-Pro-Asn-Trp-NH₂
HGHII pGlu-Leu-Thr-Phe-Thr-Pro-Asn-Trp-NH₂
Both peptides show remarkable similarities to locust adipokinetic hormones I and II and prawn red-pigment concentrating hormone, and are identical to two myotropic peptides MI and MII (O'Shea et al. , 1984; Witten et al. , 1984) and two cardioactive and hyperglycaemic peptides CC-1 and CC-2 (Scarborough et al. , 1984), respectively, also isolated from the corpora cardiaca of P. americana.     

Comparison of the experimental methods in haplotype sequencing via next generation sequencing

Although the diploid nature has been observed for over 50 years, phasing the diploid is still a laborious task. The speed and throughput of next generation sequencing have largely increased in the past decades. However, the short read-length remains one of the biggest challenges of haplotype analysis. For instance, reads as short as 150 bp span no more than one variant in most cases. Numerous experimental technologies have been developed to overcome this challenge. Distance, complexity and accuracy of the linkages obtained are the main factors to evaluate the efficiency of whole genome haplotyping methods. Here, we review these experimental technologies, evaluating their efficiency in linkages obtaining and system complexity. The technologies are organized into four categories based on its strategy: (i) chromosomes separation, (ii) dilution pools, (iii) crosslinking and proximity ligation, (ix) long-read technologies. Within each category, several subsections are listed to classify each technology. Innovative experimental strategies are expected to have high-quality performance, low cost and be labor-saving, which will be largely desired in the future.     

Detection of truncated dystrophin lacking the C-terminal domain in a Chinese pedigree by next-generation sequencing

Dystrophin (DMD) gene is the largest gene containing 79 exons involving various mutation types and regions, and targeted next-generation sequencing (NGS) was employed in detecting DMD gene mutation in the present study. A literature-annotated disease nonsense mutation (c.10141C>T, NM_004006.1) in exon 70 that has been reported as Duchenne Muscular Dystrophy (DMD)-causing mutation was found in our two patients, the proband and his cousin. In the present study two main methods were used, the next-generation sequencing and the classic Sanger sequencing. The exon capture followed by HiSeq2000 sequencing was specifically used in this study. Combined applications of the next-generation sequencing platform and bioinformatics are proved to be effective methods for DMD diagnosis.     

An integrative approach for the optical sequencing of single DNA molecules

A new approach for optically sequencing ensembles of single DNA molecules using DNA polymerase to mediate the consecutive incorporation of fluorochrome-labeled nucleotides into an array of large single DNA molecules is presented. The approach utilizes cycles of labeled fluorochrome addition, detection to count incorporations, and bleaching to reset the counter. These additions are imaged and analyzed to estimate the number of labeled additions and to correlate them on a per-locus basis along DNA backbones. Initial studies used precisely labeled polymerase chain reaction products to aid the development and validation of simple models of fluorochrome point spread functions within the imaging system. In complementary studies, nucleotides labeled with the fluorochrome R110 were incorporated into surface-elongated lambda DNA, and fluorescent signals corresponding to the addition of R110-dUTP were counted and assigned precise loci along DNA backbones. The labeled DNAs were then subjected to photobleaching and to a second cycle of addition of R110-labeled nucleotides-a second round of additions was correlated with the first to establish strings of addition histories among the ensemble of largely double-stranded templates. These results confirm the basic operational validity of this approach and point the way to the development of a practical system for optical sequencing.     

BIGpre: a quality assessment package for next-generation sequencing data

The emergence of next-generation sequencing (NGS) technologies has significantly improved sequencing throughput and reduced costs. However, the short read length, duplicate reads and massive volume of data make the data processing much more difficult and complicated than the first-generation sequencing technology. Although there are some software packages developed to assess the data quality, those packages either are not easily available to users or require bioinformatics skills and computer resources. Moreover, almost all the quality assessment software currently available didn’t taken into account the sequencing errors when dealing with the duplicate assessment in NGS data. Here, we present a new user-friendly quality assessment software package called BIGpre, which works for both Illumina and 454 platforms. BIGpre contains all the functions of other quality assessment software, such as the correlation between forward and reverse reads, read GC-content distribution, and base Ns quality. More importantly, BIGpre incorporates associated programs to detect and remove duplicate reads after taking sequencing errors into account and trimming low quality reads from raw data as well. BIGpre is primarily written in Perl and integrates graphical capability from the statistics package R. This package produces both tabular and graphical summaries of data quality for sequencing datasets from Illumina and 454 platforms. Processing hundreds of millions reads within minutes, this package provides immediate diagnostic information for user to manipulate sequencing data for downstream analyses. BIGpre is freely available at http://bigpre.sourceforge.net/.     

New reagents and methods for the synthesis of internal and 3'-labeled DNA

The syntheses of two new nucleoside phosphoramidites containing a hydroxyl functionality masked by a levulinate protecting group are presented; N(4)-(2-(ethylene glycol-2-levulinate)ethyl)-5-methyl-5'-(4,4'-dimethoxytrityl)-3'-O-(2-cyanoethyldiisopropylphosphoramidite)-2'-deoxycytidine 1 and 5-(N-(6-O-levulinoyl-1-aminohexyl)-3(E)-acrylamido)-5'-(4,4'-dimethoxytrityl)-3'-(2-cyanoethyldiisopropylphosphoramidite)-2'-deoxyuridine 3. Optimization of solid-phase-supported synthetic parameters for incorporation of these into DNA, removal of the levulinate group by exposure to dilute hydrazine, and subsequent attachment of dye labels is described. Synthesis of the known compound 5-(N-(6-trifluoroacetylaminohexyl)-3(E)-acrylamido)-5'-(4,4'-dimethoxytrityl)-3'-(2-cyanoethyldiisopropylphosphoramidite)-2'-deoxyuridine 2 (1), containing a masked amine at the end of an alkyl chain attached at the 5 position, was also revisited using new techniques developed for 3.     

Polymer-supported reagents for multi-step organic synthesis: application to the synthesis of sildenafil

Sildenafil 1 (Viagra), a well known and commercially important pharmaceutical drug, has been prepared using polymer-supported reagents in a multi-step, convergent process resulting in a clean and efficient preparation without the need for conventional purification methods.     

PacBio-LITS: a large-insert targeted sequencing method for characterization of human disease-associated chromosomal structural variations

Background

Generation of long (>5 Kb) DNA sequencing reads provides an approach for interrogation of complex regions in the human genome. Currently, large-insert whole genome sequencing (WGS) technologies from Pacific Biosciences (PacBio) enable analysis of chromosomal structural variations (SVs), but the cost to achieve the required sequence coverage across the entire human genome is high.

Results

We developed a method (termed PacBio-LITS) that combines oligonucleotide-based DNA target-capture enrichment technologies with PacBio large-insert library preparation to facilitate SV studies at specific chromosomal regions. PacBio-LITS provides deep sequence coverage at the specified sites at substantially reduced cost compared with PacBio WGS. The efficacy of PacBio-LITS is illustrated by delineating the breakpoint junctions of low copy repeat (LCR)-associated complex structural rearrangements on chr17p11.2 in patients diagnosed with Potocki–Lupski syndrome (PTLS; MIM#610883). We successfully identified previously determined breakpoint junctions in three PTLS cases, and also were able to discover novel junctions in repetitive sequences, including LCR-mediated breakpoints. The new information has enabled us to propose mechanisms for formation of these structural variants.

Conclusions

The new method leverages the cost efficiency of targeted capture-sequencing as well as the mappability and scaffolding capabilities of long sequencing reads generated by the PacBio platform. It is therefore suitable for studying complex SVs, especially those involving LCRs, inversions, and the generation of chimeric Alu elements at the breakpoints. Other genomic research applications, such as haplotype phasing and small insertion and deletion validation could also benefit from this technology.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1370-2) contains supplementary material, which is available to authorized users.     

High-throughput sequencing to decipher the genetic heterogeneity of deafness

Identifying genes causing non-syndromic hearing loss has been challenging using traditional approaches. We describe the impact that high-throughput sequencing approaches are having in discovery of genes related to hearing loss and the implications for clinical diagnosis.