Effect of OmpA signal peptide mutations on OmpA secretion, synthesis, and assembly.

In previous investigations, we have examined the effect of OmpA signal peptide mutations on the secretion of the two heterologous proteins TEM beta-lactamase and nuclease A. During these studies, we observed that a given signal peptide mutation could affect differentially the processing of precursor OmpA-nuclease or precursor OmpA-lactamase. This observation led us to further investigate the influence of the mature region of a precursor protein on protein export. Preexisting OmpA signal peptide mutations of known secretion phenotype when directing heterologous protein export (nuclease A or beta-lactamase) were fused to the homologous mature OmpA protein. Four signal peptide mutations that have previously been shown to prevent export of nuclease A and beta-lactamase were found to support OmpA protein export, albeit at reduced rates. This remarkable retention of export activity by severely defective precursor OmpA signal peptide mutants may be due to the ability of mature OmpA to interact with the cytoplasmic membrane. In addition, these same signal peptide mutations can affect the level of OmpA synthesis as well as its proper assembly in the outer membrane of Escherichia coli. Two signal peptide mutations dramatically stimulate the rate of precursor OmpA synthesis three- to fivefold above the level observed when a wild-type signal peptide is directing export. The complete removal of the OmpA signal peptide does not result in increased OmpA synthesis. This finding suggests that the signal peptide mutations function positively to stimulate OmpA synthesis, rather than bypass a down-regulatory mechanism effected by a wild-type signal peptide. Overproduction of wild-type precursor OmpA or precursors containing signal peptide mutations which lead to relatively minor kinetic processing defects results in accumulation of an improperly assembled OmpA species (imp-OmpA). In contrast, signal peptide mutations which cause relatively severe processing defects accumulate no or only small quantities of imp-OmpA. All mutations result in equivalent levels of properly assembled OmpA. Thus, a strong correlation between imp-OmpA accumulation and cell toxicity was observed. A mutation in the mature region of OmpA which prevents the proper outer membrane assembly of OmpA was suppressed when export was directed by a severely defective signal peptide. These findings suggest that signal peptide mutations indirectly influence OmpA assembly in the outer membrane by altering both the level and rate of OmpA secretion across the cytoplasmic membrane.     

Modulation of the effects of mutations in the basic region of the OmpA signal peptide by the mature portion of the protein

Oligonucleotide-directed site-specific mutagenesis was used to study the structure-function relationship of the positively charged amino terminus of the Escherichia coli outer membrane protein OmpA signal peptide. Mutations were isolated which reduced the overall charge of the amino-terminal region from +2 (wild type) to +1, 0, and -1, as well as one mutation from Thr to Ser at position 4. DNA encoding the wild type and mutant OmpA signal peptides was then fused in-frame to DNA encoding the mature regions of Staphylococcus aureus nuclease A and TEM beta-lactamase. In the case of both the beta-lactamase and nuclease fusions, normal processing was no longer observed when the charge at the amino terminus was reduced to zero or made negative. Differences between the two hybrid proteins were observed in the case of the Thr to Ser mutation. As expected, this mutation had no effect on the beta-lactamase hybrid; however, the processing rate of the nuclease hybrid protein was reduced to nearly one-half. Furthermore, this effect was essentially reversed when a Lys residue at position 3 was deleted. A model is presented which explains the differing effects of a signal peptide mutation on the secretion of different hybrid proteins based on kinetic differences in the translocation of the nuclease and beta-lactamase proteins.     

The ompA signal peptide directed secretion of Staphylococcal nuclease A by Escherichia coli

The hybrid pre-enzyme formed by fusion of the signal peptide of the OmpA protein, a major outer membrane protein of Escherichia coli, to Staphylococcal nuclease A, a protein secreted by Staphylococcus aureus, is translocated across the cytoplasmic membrane of E. coli with concomitant cleavage of the signal peptide. A DNA fragment containing the coding sequence for the ompA signal peptide was initially ligated to a DNA fragment containing the coding sequence for nuclease A, with a linker sequence of 33 nucleotides separating the coding sequences. When this fused gene was induced, an enzymatically active nuclease was secreted into the periplasmic space; sequential Edman degradation of this protein revealed that the ompA signal peptide was removed at its normal cleavage site resulting in a modified version of the nuclease having 11 extra amino acid residues attached to the amino terminus of nuclease A. The 33 nucleotides between the coding sequences for the ompA signal peptide and the structural gene for nuclease A were subsequently deleted by synthetic oligonucleotide-directed site-specific mutagenesis. The nuclease produced by this hybrid gene was secreted into the periplasmic space and by sequential Edman degradation was identical to nuclease A. Thus, the ompA signal peptide is able to direct the secretion of fused staphylococcal nuclease A, and signal peptide processing occurs at the normal cleavage site. When the hybrid gene is expressed under the control of the lpp promoter, nuclease A is produced to the extent of 10% of the total cellular protein.     

Escherichia coli signal peptides direct inefficient secretion of an outer membrane protein (OmpA) and periplasmic proteins (maltose-binding protein, ribose-binding protein, and alkaline phosphatase) in Bacillus subtilis.

Signal peptides of gram-positive exoproteins generally carry a higher net positive charge at their amino termini (N regions) and have longer hydrophobic cores (h regions) and carboxy termini (C regions) than do signal peptides of Escherichia coli envelope proteins. To determine if these differences are functionally significant, the ability of Bacillus subtilis to secrete four different E. coli envelope proteins was tested. A pulse-chase analysis demonstrated that the periplasmic maltose-binding protein (MBP), ribose-binding protein (RBP), alkaline phosphatase (PhoA), and outer membrane protein OmpA were only inefficiently secreted. Inefficient secretion could be ascribed largely to properties of the homologous signal peptides, since replacing them with the B. amyloliquefaciens alkaline protease signal peptide resulted in significant increases in both the rate and extent of export. The relative efficiency with which the native precursors were secreted (OmpA >> RBP > MBP > PhoA) was most closely correlated with the overall hydrophobicity of their h regions. This correlation was strengthened by the observation that the B. amyloliquefaciens levansucrase signal peptide, whose h region has an overall hydrophobicity similar to that of E. coli signal peptides, was able to direct secretion of only modest levels of MBP and OmpA. These results imply that there are differences between the secretion machineries of B. subtilis and E. coli and demonstrate that the outer membrane protein OmpA can be translocated across the cytoplasmic membrane of B. subtilis.     

Synthesis of OmpA protein of Escherichia coli K12 in Bacillus subtilis

We have inserted a C-terminally truncated gene of the major outer membrane protein OmpA of Escherichia coli downstream from the promoter and signal sequence of the secretory alpha-amylase of Bacillus amyloliquefaciens in a secretion vector of Bacillus subtilis. B. subtilis transformed with the hybrid plasmid synthesized a protein that was immunologically identified as OmpA. All the protein was present in the particulate fraction. The size of the protein compared to the peptide synthesized in vitro from the same template indicated that the alpha-amylase derived signal peptide was not removed; this was verified by N-terminal amino acid sequence determination. The lack of cleavage suggests that there was little or no translocation of OmpA protein across the cytoplasmic membrane. This is an unexpected difference compared with periplasmic proteins, which were both secreted and processed when fused to the same signal peptide. A requirement of a specific component for the export of outer membrane proteins is suggested.     

In vivo effect of asparagine in the hydrophobic region of the signal sequence

On the basis of the biophysical studies on the synthetic mutant (Ile-8----Asn) OmpA signal peptide in the preceding paper (Hoyt, D. C., and Gierasch, L.M. (1991) J. Biol. Chem. 266, 14406-14412), the in vivo effects of the same mutation were examined by fusing the mutant OmpA signal sequence to Staphylococcus aureus nuclease or TEM beta-lactamase. The mutation in which the isoleucine residue at position 8 of the OmpA signal sequence of Escherichia coli was replaced with a neutral polar residue, asparagine, resulted in a defective signal peptide. The mutant signal sequence was unable to be processed, and the precursor molecule accumulated in the cytoplasmic as well as in the membrane fractions, indicating that the Ile-8----Asn OmpA signal sequence is not competent for translocating nuclease A or beta-lactamase across the membrane. This result is consistent with the in vitro studies on the Ile-8----Asn OmpA signal peptide, which indicated that the mutant signal peptide was unable to penetrate into the hydrophobic core of the lipid bilayer. Other asparagine or glutamine substitution mutations in the hydrophobic region of the OmpA signal sequence were also examined. Interestingly, the OmpA signal sequence with either Ile-8----Gln, Val-10----Asn, or Leu-12----Asn mutation was completely defective as the Ile-8----Asn OmpA signal sequence, while the Ile-6----Asn and Ala-9----Asn OmpA nucleases were able to be processed to secrete nuclease, although the processing occurred at a much slower rate than the wild-type OmpA nuclease. These results indicate that the defects depend on the position of the lesion in the hydrophobic core of the OmpA signal sequence.     

Enhancement of protein translocation across the membrane by specific mutations in the hydrophobic region of the signal peptide.

The hydrophobic region of the signal peptide of the OmpA protein of the Escherichia coli outer membrane was extensively altered in its hydrophobicity and predicted secondary structure by site-specific mutagenesis. The mutated signal peptides were fused to nuclease A from Staphylococcus aureus, and the function of the signal peptide was examined by measuring the rate of processing of the signal peptide. Six of the 12 mutated signal peptides in the nuclease hybrid were processed faster than the wild-type. In particular, the processing of the mutated signal peptide in which the alanine residue at position 9 was substituted with a valine residue was enhanced almost twofold over the processing of the wild-type signal peptide. In addition, the production of nuclease A fused with this mutated signal peptide also increased twofold. However, these effects were not observed when the mutated signal peptide was fused to TEM beta-lactamase. Analysis of the present mutations suggests that both overall hydrophobicity and distinct structural requirements in the hydrophobic region have important roles in signal peptide function.     

The differential effect on two hybrid proteins of deletion mutations within the hydrophobic region of the Escherichia coli OmpA signal peptide

Oligonucleotide-directed site-specific mutagenesis was used to systematically shorten the hydrophobic region within the signal peptide of the Escherichia coli outer membrane protein OmpA. DNA encoding the wild type and mutant OmpA signal peptides were then fused in frame to DNA encoding the mature regions of Staphylococcus aureus nuclease A and TEM beta-lactamase. The ability of these signal peptides to direct processing of the resulting hybrid proteins was dependent on both their length and the protein to which they were fused. Deletion of two or more residues progressively slowed processing of pro-OmpA-nuclease. By contrast, pro-OmpA-beta-lactamase was less sensitive to the length of the hydrophobic region than to the nature of the deleted residue(s). Deletion of an Ala residue tended to reduce processing efficiency of pro-OmpA-beta-lactamase, while deletion of an Ile residue, together with the Ala residue, resulted in improvement. The loss of either 3 or 4 residues abolished processing of both hybrids. These data indicate that both the length as well as the identity of residues in the hydrophobic region are important. The relative importance of these two factors depends on the mature region of the protein being secreted.     

Generalized transposon shuttle mutagenesis in Neisseria gonorrhoeae: a method for isolating epithelial cell invasion-defective mutants

Hybrid genes were constructed to express bifunctional hybrid proteins in which staphyloccal nuclease A with or without an amino-terminai OmpA signal sequence was fused with TEM β-lactamase (at the carboxyl terminal side) using the signal peptide of the major outer membrane lipoprotein of Escherichia coli as an internal linker. The hybrid proteins were found to be inserted in the membrane. Orientation of the hybrid protein with the OmpA signal peptide showed that the nuclease was translocated into the periplasm and the β-lactamase remained in the cytoplasm. This indicates that the cleavable OmpA signal peptide served as a secretory signal for nuclease and the internal lipoprotein signal served as the transmembrane anchor, in the absence of the OmpA signal sequence the topology of the hybrid protein was reversed indicating that the internal lipoprotein signal peptide initially served as the signal peptide for the secretion of the carboxy terminal β-lactamase domain across the membrane and subsequently as a membrane anchoring signal. The role of charged amino acids in the translocation and transmembrane orientation of membrane proteins was also analysed by introducing charged amino acids to either or both sides of the internal lipoprotein signal sequence in the bifunctional hybrid proteins in the absence of the amino-terminal signal sequence. Introduction of two lysine residues at the carboxy-terminal side of the internal signal sequence reversed the topology of the transmembrane protein by translocating the aminoterminal nuclease domain across the membrane, leaving the carboxyl terminal β-actamase domain in the cytoplasm. When three more lysine residues were added to the amino-terminal side of the internal signal sequence of the same construct the membrane topology flipped back to the original orientation. A similar reversion of the topology could be obtained by introducing negatively charged residues at the amino-terminal side of the internal signal sequence. Present results demonstrate for the first time that a bifunctional transmembrane protein can be engineered to assume either of the two opposite orientations and that charge balance around the transmembrane domain is a major factor in controlling the topology of a transmembrane protein.     

Effects of signal peptide changes on the secretion of bovine somatotropin (bST) from Escherichia coli.

Bovine somatotropin (bST) was secreted from Escherichia coli at moderate levels of 1-2 micrograms/ml/OD using expression vectors in which the bST gene was fused to the lamB secretion signal. To study the secretion properties of bST in E.coli further, two approaches for modifying the secretion signal were employed. In the first case, fusion proteins were constructed with six alternative bacterial secretion signals: three from E.coli proteins (HisJ, MalE and OmpA), two from bacteriophage proteins (M13 coat protein and PA-2 Lc) and one from the chitinase A protein of Serratia marcescens. The results, as monitored by Western blot analysis of both total cell protein and the periplasmic fraction, showed that these changes in the secretion signal did not significantly affect the secretion properties of bST. In the second approach, a library of random mutations was created in the lamB secretion signal and 200 independent clones were screened. The level of secreted bST was determined by growing individual clones in duplicate in microtiter wells, inducing protein expression and measuring the bST released by osmotic shock using a particle concentration fluorescent immunoassay. The secretion properties of several novel variants in the LamB signal peptide are presented.     

信号肽及化学通透剂对环糊精葡萄糖基转移酶胞外分泌的影响

【目的】研究不同的信号肽和化学通透剂对重组环糊精葡萄糖基转移酶(CGTase)胞外分泌的影响,提高CGTase的胞外分泌量。【方法】扩增地芽孢杆菌CHB1(Geobacillus sp.CHB1)的CGTase基因,构建带有地芽孢杆菌CHB1自身信号肽、Omp A、Pel B信号肽和不带信号肽的4种重组质粒;比较4种重组质粒对重组CGTase胞外分泌的影响,筛选最优的信号肽;考察甘氨酸、Triton X-100、SDS和Tween 80四种化学通透剂对重组CGTase胞外分泌的影响,确定最佳的化学通透剂及其浓度。【结果】Omp A信号肽介导的分泌效果最好,胞外酶活达到7.44 U/m L,分别是Pel B、CHB1信号肽的2.04倍和11.27倍,不带信号肽的重组质粒菌胞外检测不到酶活;携带Omp A信号肽的重组质粒菌发酵48 h,同时添加浓度为0.6%的甘氨酸和0.3%的Triton X-100,胞外酶活达最大到14.27 U/m L;SDS和Tween 80对该酶的胞外分泌具有明显的抑制作用。【结论】Omp A信号肽的介导效果最佳,同时添加浓度为0.6%和0.3%的甘氨酸和Triton X-100可以有效促进胞外分泌,为该重组酶的高效胞外分泌提供了一种有效的方法。     

Secretion of human superoxide dismutase in Escherichia coli using the condensed single-protein-production system

A secretion vector, pColdV for the Single-Protein-Production (SPP) system was constructed using the E. coli OmpA signal peptide. Using this vector, human superoxide dismutase (hSOD) was co-expressed with MazF, an ACA-specific mRNA interferase, allowing E. coli cells to produce only hSOD, which was secreted into the periplasmic space with a yield of ～20% of total cellular proteins. The signal peptide was properly cleaved. Using cells overproducing DsbA protein, two S-S bridges were also properly formed to yield enzymatically active SOD. A well resolved heteronuclear single quantum coherence (HSQC) spectrum of hSOD isotope-labeled in the condensed SPP (cSPP) system was obtained by simply isolating the periplasmic fraction. These results indicate that human secretory proteins can be expressed well in the cSPP system using pColdV.     

Towards the identification of type II secretion signals in a nonacylated variant of pullulanase from Klebsiella oxytoca

Pullulanase (PulA) from the gram-negative bacterium Klebsiella oxytoca is a 116-kDa surface-anchored lipoprotein of the isoamylase family that allows growth on branched maltodextrin polymers. PulA is specifically secreted via a type II secretion system. PelBsp-PulA, a nonacylated variant of PulA made by replacing the lipoprotein signal peptide (sp) with the signal peptide of pectate lyase PelB from Erwinia chrysanthemi, was efficiently secreted into the medium. Two 80-amino-acid regions of PulA, designated A and B, were previously shown to promote secretion of beta-lactamase (BlaM) and endoglucanase CelZ fused to the C terminus. We show that A and B fused to the PelB signal peptide can also promote secretion of BlaM and CelZ but not that of nuclease NucB or several other reporter proteins. However, the deletion of most of region A or all of region B, either individually or together, had only a minor effect on PelBsp-PulA secretion. Four independent linker insertions between amino acids 234 and 324 in PelBsp-PulA abolished secretion. This part of PulA, region C, could contain part of the PulA secretion signal or be important for its correct presentation. Deletion of region C abolished PelBsp-PulA secretion without dramatically affecting its stability. PelBsp-PulA-NucB chimeras were secreted only if the PulA-NucB fusion point was located downstream from region C. The data show that at least three regions of PulA contain information that influences its secretion, depending on their context, and that some reporter proteins might contribute to the secretion of chimeras of which they are a part.     

Requirement of pro-sequence for the production of active subtilisin E in Escherichia coli

Subtilisin E, an alkaline serine protease of Bacillus subtilis 168, is first produced as a precursor, pre-pro-subtilisin, which consists of a signal peptide for protein secretion (pre-sequence) and a peptide extension of 77 amino acid residues (pro-sequence) between the signal peptide and mature subtilisin. When the entire coding region for pre-pro-subtilisin E was cloned into an Escherichia coli expression vector, active mature subtilisin E was secreted into the periplasmic space. When the pre-sequence was replaced with the E. coli OmpA signal peptide, active subtilisin E was also produced. When the OmpA signal peptide was directly fused to the mature subtilisin sequence, no protease activity was detected, although this product had the identical primary structure as subtilisin E as a result of cleavage of the OmpA signal peptide and was produced at a level of approximately 10% of total cellular protein. When the OmpA signal peptide was fused to the 15th or 44th amino acid residue from the amino terminus of the pro-sequence, active subtilisin was also not produced. These results indicate that the pro-sequence of pre-pro-subtilisin plays an important role in the formation of enzymatically active subtilisin. It is proposed that the pro-sequence is essential for guiding appropriate folding of the enzymatically active conformation of subtilisin E.     

Genetic Analysis of the Colicin V Secretion Pathway

Colicin V (ColV) is peptide antibiotic secreted by Escherichia coli through a dedicated exporter composed of three proteins, CvaA, CvaB, and TolC. ColV secretion is independent of the E. coli general secretory pathway (Sec) but requires an N-terminal export signal specific for the CvaAB/TolC exporter. ColV secretion was characterized using genetic and biochemical methods. When the ColV N-terminal extension is replaced with the OmpA signal sequence, the Sec system can localize ColV to the periplasm. Periplasmic ColV is lethal to cells lacking the ColV immunity protein, Cvi. Based on this result, a genetic assay was designed to monitor for the presence of periplasmic ColV during normal CvaAB/TolC mediated secretion. Results indicate that low levels of ColV may be present in the periplasm during secretion. Precursor and mature ColV were also characterized from the wild-type system and in various exporter mutant backgrounds using immunoprecipitation. ColV processing is rapid in wild-type cells, and CvaA and CvaB are critical for processing to occur. In contrast, processing occurs normally, albeit more slowly, in a TolC mutant.     

Extracellular production of Streptomyces lividans acetyl xylan esterase A in Escherichia coli for rapid detection of activity

Acetyl xylan esterase A (AxeA) from Streptomyces lividans belongs to a large family of industrially relevant polysaccharide esterases. AxeA and its truncated form containing only the catalytically competent domain, AxeA(tr), catalyze both the deacetylation of xylan and the N-deacetylation of chitosan. This broad substrate specificity lends additional interest to their characterization and production. Here, we report three systems for extracellular production of AxeA(tr): secretion from the native host S. lividans with the native signal peptide, extracellular production in Escherichia coli with the native signal peptide, and in E. coli with the OmpA signal peptide. Over five to seven days of a shake flask culture, the native host S. lividans with the native signal peptide secreted AxeA(tr) into the extracellular medium in high yield (388 mg/L) with specific activity of 19 U/mg corresponding to a total of 7000 U/L. Over one day of shake flask culture, E. coli with the native secretion signal peptide produced 84-fold less in the extracellular medium (4.6 mg/L), but the specific activity was higher (100 U/mg) corresponding to a total of 460 U/L. A similar E. coli culture using the OmpA signal peptide, produced 10mg/L with a specific activity of 68 U/mg, corresponding to a total of 680 U/L. In 96-well microtiter plates, extracellular production with E. coli gave approximately 30 and approximately 86 microg/mL in S. lividans. Expression in S. lividans with the native signal peptide is best for high level production, while expression in E. coli using the OmpA secretion signal peptide is best for high-throughput expression and screening of variants in microtiter plate format.     

Expression and secretion of staphylococcal nuclease in yeast: effects of amino-terminal sequences.

Staphylococcus aureus nuclease A hybrid genes, encoding proteins OmpA-nuclease, lipo-nuclease and Pin-nuclease, were cloned downstream of the yeast GAL10 inducible promoter. OmpA-nuclease and lipo-nuclease contain the mature staphylococcal nuclease sequence preceded by the Escherichia coli OmpA and lipoprotein signal sequences, respectively, whereas Pin-nuclease lacks a defined signal sequence at its amino terminus. We found that: (a) the nuclease gene products synthesized in yeast are active, but they do not affect cell growth; (b) OmpA-nuclease and lipo-nuclease are partially processed and constitute approximately 1.0-1.5% of the yeast cell protein; (c) OmpA and lipoprotein signal sequences function similarly in secretion, allowing 35-40% of the processed nuclease to be translocated into the yeast periplasm; and (d) Pin-nuclease, which lacks hydrophobic sequences at its amino-terminus, is accumulated at a level tenfold lower than the hybrid proteins that do contain signal sequences. Nevertheless, 50% of the enzyme activity of Pin-nuclease in yeast is localized in the periplasmic space.     

Escherichia coli expression and processing of human interleukin-1 beta fused to signal peptides

Escherichia coli expression, processing, and secretion of human interleukin-1 beta (IL-1 beta) fused to the signal peptide of E. coli OmpA or PhoA protein were studied. With fusion to either signal sequence, high-level expression was observed and the products accumulated to about 20% of total cell protein. In the fusion to OmpA leader sequence, more than 50% of the product has the OmpA signal peptide removed precisely. The majority of the processed material is not released by osmotic shock. On the other hand, very little of the material from the fusion to PhoA has the PhoA signal peptide removed. Use of the host with a mutation in prlA or prlF, variation of temperature for cell growth, and alteration of the amino acid residues around the cleavage site do not facilitate processing of the PhoA signal peptide. These results suggest that some component in the PhoA signal peptide, interacting with the Il-1 beta sequence, is interfering with the processing of the signal peptide.     

Analysis of signals for secretion in the staphylococcal protein A gene.

Different constructs of the gene encoding staphylococcal protein A were introduced in Staphylococcus aureus and S. xylosus as well as Escherichia coli. The product of the gene without the cell wall anchoring domain was efficiently secreted in all three hosts. N-terminal sequencing of the affinity-purified mature protein revealed a common processing site after the alanine residue at position 36. In contrast, when an internal IgG-binding fragment of protein A (region B) was inserted after the protein A signal sequence, the product was poorly secreted and N-terminal sequencing revealed no processing at the normal site. This demonstrates that the structure of the polypeptide chain beyond the signal peptide cleavage site can affect cleavage. Another construct, containing the N-terminal IgG-binding part of the mature protein A (region E) followed by region B, gave correct processing and efficient secretion. Unexpectedly, the gene product, EB, was not only secreted and correctly processed, but was also excreted to the culture medium of E. coli. Secretion vectors containing the protein A signal sequence were constructed to facilitate secretion of foreign gene products. Insertion of the E. coli gene phoA, lacking its own promoter and signal sequence, led to efficient secretion of alkaline phosphatase both in E. coli and S. aureus.     

Secretion of staphylococcal nuclease by Bacillus subtilis.

The staphylococcal nuclease (nuc) gene from Staphylococcus aureus has been cloned and expressed in Bacillus subtilis. The nuclease protein was expressed either from its own promoter and translation start signals, or from a combination of a B. subtilis promoter, ribosome binding site, and a signal peptide sequence. Greater than 80% of the active gene product was secreted into the medium, whereas, when a signal peptide sequence was absent, as little as 4% of the nuclease activity was found in the culture medium. Intracellular (or cell-bound) nuclease, as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western blotting, was shown to have the molecular weight of the predicted precursor protein with the signal peptide. Levels of nuclease reached 50 mg per liter in the culture medium, depending on the growth medium and the strain used. These findings indicate the prospective use of nuclease as a model system for studying secretion of heterologous proteins in B. subtilis.