Transforming growth factor-beta 1 in adipose derived stem cells conditioned medium is a dominant paracrine mediator determines hyaluronic acid and collagen expression profile

Conditioned medium from adipose derived stem cells (ADSC-CM) stimulates both collagen synthesis and migration of fibroblasts, and accelerates wound healing in vivo. Recently, the production and secretion of growth factors has been identified as an essential function of adipose-derived stem cells (ADSCs). However, the main soluble factor of ADSC-CM which mediates paracrine effects and its underlying mechanism has not been elucidated yet. In this study, we considered transforming growth factor-beta1 (TGF-β1) as a strong candidate for paracrine effect of ADSC-CM and investigated collagen synthesis and hyaluronic acid synthase (HAS) expression. After ADSC-CM addition, collagen type I, type III, HAS and hyaluronic acid (HA) expressions on human dermal fibroblasts (HDFs) were evaluated. Furthermore, to clarify effects of TGF-β1 as a paracrine mediator, TGF-β1 antibody and external supplementary TGF-β1 were treated to HDFs. Collagens type I, type III, HAS-1 and HAS-2 mRNA expressions of HDFs were greatly increased by ADSC-CM treatment, however there was no change in TGF-β1 antibody treated HDFs compared with non-treated control. These results strongly demonstrate that TGF-β1 plays an important role as a paracrine mediator of ECM synthesis. The fact that TGF-β1 contained in ADSC-CM not only accelerates collagen deposition but also increase hyaluronic acid synthesis of HDFs through HAS-1 and HAS-2 expression was also elucidated in this study. Therefore, ADSC-CM shows promise for the treatment of cutaneous wounds and accelerates granulation formation during healing process.     

Blood cells transcriptomics as source of potential biomarkers of articular health improvement: effects of oral intake of a rooster combs extract rich in hyaluronic acid

The aim of the study was to explore peripheral blood gene expression as a source of biomarkers of joint health improvement related to glycosaminoglycan (GAG) intake in humans. Healthy individuals with joint discomfort were enrolled in a randomized, double-blind, placebo-controlled intervention study in humans. Subjects ate control yoghurt or yoghurt supplemented with a recently authorized novel food in Europe containing hyaluronic acid (65 %) from rooster comb (Mobilee™ as commercial name) for 90 days. Effects on functional quality-of-life parameters related to joint health were assessed. Whole-genome microarray analysis of peripheral blood samples from a subset of 20 subjects (10 placebo and 10 supplemented) collected pre- and post-intervention was performed. Mobilee™ supplementation reduced articular pain intensity and synovial effusion and improved knee muscular strength indicators as compared to placebo. About 157 coding genes were differentially expressed in blood cells between supplemented and placebo groups post-intervention, but not pre-intervention (p < 0.05; fold change ≥1.2). Among them, a reduced gene expression of glucuronidase-beta (GUSB), matrix metallopeptidase 23B (MMP23B), xylosyltransferase II (XYLT2), and heparan sulfate 6-O-sulfotransferase 1 (HS6ST1) was found in the supplemented group. Correlation analysis indicated a direct relationship between blood cell gene expression of MMP23B, involved in the breakdown of the extracellular matrix, and pain intensity, and an inverse relationship between blood cell gene expression of HS6ST1, responsible for 6-O-sulfation of heparan sulfate, and indicators of knee muscular strength. Expression levels of specific genes in blood cells, in particular genes related to GAG metabolism and extracellular matrix dynamics, are potential biomarkers of beneficial effects on articular health.

Electronic supplementary material

The online version of this article (doi:10.1007/s12263-014-0417-3) contains supplementary material, which is available to authorized users.     

The behaviour of BHK cells and neutrophil leukocytes on collagen gels of defined mechanical strength

This study demonstrates how the mechanical strength of a series of collagen/composite gels can be measured using a penetrometer. It was found that the presence of fibrin in collagen gels resulted in increased gel strength. Similarly hyaluronic acid was found to increase the strength of collagen gels. Addition of heparin weakened collagen gels as did chondroitin-6-sulphate. Neutrophil migration into collagen gels was found to be inversely proportional to gel strength. Fibrin and hyaluronic acid containing gels inhibited neutrophil migration while the presence of heparin and chondroitin sulphate increased neutrophil migration. BHK gel contraction experiments demonstrated how the presence of fibrin prevents gel contraction. Despite increasing gel strength the presence of hyaluronic acid appeared to have no effect on BHK contraction of collagen gels. Similarly the presence of heparin or chondroitin sulphate had no effect on gel contraction by BHK cells.     

Regulation of hyaluronan synthases in mouse uterine cervix

We examined the expression pattern of hyaluronan synthase (HAS) mRNAs in the uterine cervix of pregnant mice. The expression levels of HAS-1 and -2 mRNAs peaked at delivery, whereas that of HAS-3 mRNA peaked on the 15th day of pregnancy. The regulation of HAS mRNA expression was examined in pregnant mouse uterine cervical fibroblasts. The expression of HAS-1, -2, and -3 mRNAs was significantly augmented by interleukin-1beta (IL-1beta). Progesterone significantly interfered with expression of HAS-1 and -2 mRNAs, but significantly increased the expression of HAS-3 mRNA. Low-molecular-weight hyaluronan significantly enhanced only the expression of HAS-1 mRNA. These results indicate that HAS in the uterine cervix is regulated in a complex manner by IL-1beta, progesterone, and low-molecular-weight hyaluronan, of which changes in the cervical tissue and serum closely participate in uterine cervical ripening and/or inflammation.     

Shelf-Life Evaluation of Bilayered Human Skin Equivalent, MyDerm™

Skin plays an important role in defense against infection and other harmful biological agents. Due to its fragile structure, skin can be easily damaged by heat, chemicals, traumatic injuries and diseases. An autologous bilayered human skin equivalent, MyDerm™, was engineered to provide a living skin substitute to treat critical skin loss. However, one of the disadvantages of living skin substitute is its short shelf-life, hence limiting its distribution worldwide. The aim of this study was to evaluate the shelf-life of MyDerm™ through assessment of cell morphology, cell viability, population doubling time and functional gene expression levels before transplantation. Skin samples were digested with 0.6% Collagenase Type I followed by epithelial cells dissociation with TrypLE Select. Dermal fibroblasts and keratinocytes were culture-expanded to obtain sufficient cells for MyDerm™ construction. MyDerm™ was constructed with plasma-fibrin as temporary biomaterial and evaluated at 0, 24, 48 and 72 hours after storage at 4°C for its shelf-life determination. The morphology of skin cells derived from MyDerm™ remained unchanged across storage times. Cells harvested from MyDerm™ after storage appeared in good viability (90.5%±2.7% to 94.9%±1.6%) and had short population doubling time (58.4±8.7 to 76.9±19 hours). The modest drop in cell viability and increased in population doubling time at longer storage duration did not demonstrate a significant difference. Gene expression for CK10, CK14 and COL III were also comparable between different storage times. In conclusion, MyDerm™ can be stored in basal medium at 4°C for at least 72 hours before transplantation without compromising its functionality.     

Heparin modulates the organization of hydrated collagen gels and inhibits gel contraction by fibroblasts

We studied the effects of extracellular matrix components on fibroblast contraction of hydrated collagen gels. After 4-h incubations, heparin-containing collagen gels contracted only 10% compared with 50% contraction of control gels. Contraction was not affected by hyaluronic acid, dermatan sulfate, or fibronectin, implying that the activity of heparin was specific. The possibility that heparin inhibited attachment of the cells to the gels was ruled out. Also, addition of heparin to the incubation medium had no effect on contraction. Microscopic examination showed that control collagen gels were composed of a uniform network of interlocking fibrils of similar sizes. Heparin-containing gels, on the other hand, were highly variable with some collagen bundles containing 5-6 collagen fibrils and other regions containing amorphous material. Unlike the control gels, the fibrils of heparin-containing gels were not continuously interconnected. Based on the results, we propose that fibroblasts attach normally to the collagen fibrils of heparin-containing gels and attempt to contract the gels, but the mechanical forces exerted by fibroblasts on individual collagen fibrils cannot be propagated throughout the gels.     

Investigation of Thermal and Viscoelastic Properties of Polymers Relevant to Hot Melt Extrusion,IV: Affinisol™ HPMC HME Polymers

Most cellulosic polymers cannot be used as carriers for preparing solid dispersion of drugs by hot melt extrusion (HME) due to their high melt viscosity and thermal degradation at high processing temperatures. Three HME-grade hydroxypropyl methylcelluloses, namely Affinisol™ HPMC HME 15 cP, Affinisol™ HPMC HME 100 cP, and Affinisol™ HPMC HME 4 M, have recently been introduced by The Dow Chemical Co. to enable the preparation of solid dispersion at lower and more acceptable processing temperatures. In the present investigation, physicochemical properties of the new polymers relevant to HME were determined and compared with that of Kollidon^® VA 64. Powder X-ray diffraction (PXRD), modulated differential scanning calorimetry (mDSC), thermogravimetric analysis (TGA), moisture sorption, rheology, and torque analysis by melt extrusion were applied. PXRD and mDSC showed that the Affinisol™ polymers were amorphous in nature. According to TGA, the onset of degradation for all polymers was >220°C. The Affinisol™ polymers exhibited less hygroscopicity than Kollidon^® VA 64 and another HPMC polymer, Methocel™ K100LV. The complex viscosity profiles of the Affinisol™ polymers as a function of temperature were similar. The viscosity of the Affinisol™ polymers was highly sensitive to the shear rate applied, and unlike Kollidon^® VA 64, the viscosity decreased drastically when the angular frequency was increased. Because of the very high shear rate encountered during melt extrusion, Affinisol™ polymers showed capability of being extruded at larger windows of processing temperatures as compared to that of Kollidon^® VA 64.KEY WORDS: Affinisol™ HPMC HME, hot melt extrusion, hydroxypropyl methylcellulose, solid dispersion, thermal analysis, viscosity     

Extracellular matrix organization modulates fibroblast growth and growth factor responsiveness

To learn more about the relationship between extracellular matrix organization, cell shape, and cell growth control, we studied DNA synthesis by fibroblasts in collagen gels that were either attached to culture dishes or floating in culture medium during gel contraction. After 4 days of contraction, the collagen density (initially 1.5 mg/ml) reached 22 mg/ml in attached gels and 55 mg/ml in floating gels. After contraction, attached collagen gels were well organized; collagen fibrils were aligned in the plane of cell spreading; and fibroblasts had an elongated, bipolar morphology. Floating collagen gels, however, were unorganized; collagen fibrils were arranged randomly; and fibroblasts had a stellate morphology. DNA synthesis by fibroblasts in contracted collagen gels was suppressed if the gels were floating in medium but not if the gels were attached, and inhibition was independent of the extent of gel contraction. Therefore, growth of fibroblasts in contracted collagen gels could be regulated by differences in extracellular matrix organization and cell shape independently of extracellular matrix density. We also compared the responses of fibroblasts in contracted collagen gels and monolayer culture to peptide growth factors including fibroblast growth factor, platelet-derived growth factor, transforming growth factor-beta, and interleukin 1. Cells in floating collagen gels were generally unresponsive to any of the growth factors. Cells in attached collagen gels and monolayer culture were affected similarly by fibroblast growth factor but not by the others. Our results indicate that extracellular matrix organization influenced not only cell growth, but also fibroblast responsiveness to peptide growth factors.     

The effects of a collagenous extracellular matrix on fibroblast membrane organization : An ESR spin label study

Human skin fibroblasts, both in suspension and cultured within a three-dimensional collagen matrix have been examined by electron spin resonance ESR using the probe 5-doxyl stearic acid. The order of the plasma membrane was found to be strongly influenced by the collagen matrix, being greater for cells within the collagen gel than in suspension. The collagen cultures used in this study were either left attached to the walls of the plastic culture dish (‘attached’ gels) or dislodged and allowed to float freely in the culture medium (‘floating’ gels). Membrane order increased with time in attached gels, reaching a steady value after 2–3 h. A further increase in order was observed when floating gels were prepared 24 h later. Cell morphology within the collagen gel culture was observed to vary considerably, with time and mode of culture. Increased order, over that observed in suspension, was also found for cells attached to other substrata. The data indicate that the increase in membrane order observed in cells embedded within a three-dimensional collagen gel matrix compared with cells in suspension does not correlate with a particular cell morphology in the gel, but rather appears to result from the establishment of adhesive interactions with the surrounding collagen fibres.     

Age-related changes in cyclic phosphatidic acid-induced hyaluronic acid synthesis in human fibroblasts

Hyaluronic acid is a major component of the extracellular matrix, which is important for skin hydration. As aging brings skin dehydration, we aimed to clarify the mRNA expression of hyaluronic acid-related proteins in human skin fibroblasts from donors of various ages (range 0.7–69 years). Previously, we reported that cyclic phosphatidic acid (cPA), a unique phospholipid mediator, stimulated the expression of HAS2 and increased hyaluronic acid synthesis in human skin fibroblasts (donor age: 3 days). In this study, we measured the mRNA expression of hyaluronic acid-related proteins: hyaluronan synthase (HAS) 1–3, hyaluronidase-1, -2, and hyaluronic acid-binding protein (versican). In addition, we tested whether cPA could increase hyaluronic acid synthesis in skin fibroblasts derived from donors of various ages. The expression of HAS1, 3, hyaluronidase-1, and -2 did not change with aging. However, the mRNA expression of versican decreased with aging. Although it is thought that the amount of hyaluronic acid in the dermis decreases with aging, the mRNA expression of HAS2 was increased. But the amount of hyaluronic acid secreted by fibroblasts did not increase with aging. This suggests that the activity and/or protein expression of HAS2 decrease with aging. Furthermore, we observed that cPA caused the increase of hyaluronic acid synthesis at any age, and this effect was increased with aging. These results suggest that aging made the fibroblasts more sensitive to cPA treatment. Therefore, cPA represents a suitable candidate for the health maintenance and improvement of the skin by increasing the level of hyaluronic acid in the dermis.     

Development of Satranidazole Mucoadhesive Gel for the Treatment of Periodontitis

The aim of the paper was to develop satranidazole-containing mucoadhesive gel for the treatment of periodontitis. Different mucoadhesive gels were prepared, using various gelling agents like sodium carboxymethylcellulose (SCMC), poloxamer 407, hydroxyethylcellulose, hydroxypropylcellulose, hydroxypropylmethylcellulose, and the mucoadhesive polymer carbopol 934P. The selected formulations (based on the mucoadhesive force) were studied for different mechanical properties, such as mucoadhesive strength, hardness, compressibility, adhesiveness, and cohesiveness through Texture Profile Analyzer. In vitro satranidazole release from the prepared formulations was also determined and compared with marketed preparation of metronidazole (Metrogyl® gel). The formulation SC30 (containing SCMC 3% w/v) showed maximum mucoadhesive strength (167.72 ± 3.76 g) and adhesiveness (−46.23 ± 0.34 N mm), with low hardness (9.81 ± 0.04 N) and compressibility (40.05 ± 0.48 N mm) and moderate cohesiveness (0.87 ± 0.01). SC30 formulation exhibited long-term release. Thus, SC30 gel was evaluated for its clinical effectiveness along with marketed metronidazole gel. At the end of the study (42 days of clinical studies), both formulations were found to significantly reduce the probing depth, plaque index, gingival index, calculus criteria, and bleeding index. However, the SC30 gel was more effective in reducing the above parameters than marketed metronidazole gel. This study confirmed the acceptability and effectiveness of satranidazole gel for treatment of periodontitis.Key words: mucoadhesive gel, periodontitis, satranidazole, texture profile analysis     

Lentiviral-mediated over-expression of hyaluronan synthase-1 (HAS-1) decreases the cellular inflammatory response and results in regenerative wound repair

Fetal wounds have been found to have increased levels of high-molecular-weight hyaluronan (HMW-HA) compared with those of adults. The primary enzyme responsible for producing HMW-HA is hyaluronic acid synthase-1 (HAS-1). We hypothesized that over-expression of HAS-1 in adult dermal wounds would decrease inflammation and promote regenerative healing. To test this hypothesis, the flanks of adult C57Bl/6 mice were treated with a lentiviral construct containing either HAS-1-GFP or GFP transgenes. After 48 h, a 4-mm excisional wound was made at the site of treatment. Wounds were harvested at days 3, 7, or 28 after wounding. Wound phenotype was assessed by histology to examine tissue architecture and immunohistochemistry for CD45. At 7 and 28 days, lenti-HAS-1-treated wounds demonstrated the restoration of the normal dermal elements and organized collagen fiber orientation. In contrast, the lenti-GFP-treated wounds lacked normal dermal architecture and demonstrated a disorganized collagen scar. At 3 and 7 days, wounds treated with lenti-HAS-1 exhibited a significant decrease in the number of inflammatory cells when compared with wounds treated with lenti-GFP. Thus, HAS-1 over-expression promotes dermal regeneration, in part by decreasing the inflammatory response and by recapitulation of fetal extracellular matrix HMW-HA content.     

An improved method for the collagen gel contraction assay

The collagen gel contraction (CGC) assay is used frequently to study the cell-mediated reorganization of the extracellular natrix. In a typical CGC assay, cells embedded in a disk-shaped lattice (gel) of native type I collagen fibers compress the fibers and, consequently, reduce the diameter of the collagen disk within h or d. The degree to which the collagen is contracted is usually quantified by measurement of the diameter or the area of the disk. During CCC assays, friction or adhesion (or both) between gels and their culture containers can cause gels to be incompletely contracted or to acquire distorted shapes. Such occurrences degrade the reproducibility and reliability of measurements of gel dimensions. To address these problems, we developed an oil-supported collagen retraction (OSCR) assay that creates an environment of low friction and adhesion around the contracting collagen gel. The OSCR assay is accomplished with simple equipment and is easily performed, sensitive, and consistently yields fully contracted gels with minimal distortion.     

Rheological properties of skin components under compressive load

Characterization was made of the mechanical properties under compression of four major skin components (collagen, elastin, chondroitin sulfate, and hyaluronic acid) placed in a gel matrix. Using the previous theoretical work of Bert et al., thickness under compression was related to degree of hydration and the results expressed in terms of pressure vs. hydration. All measurements were conducted at 14 degrees C, 21 degrees C, and 25 degrees C. Application of the findings to a model based on the finite deformation strain-energy theory of Aubert indicate that collagen, elastin, and chondroitin sulfate show a viscoelastic response under compression. On the other hand, hyaluronic acid and gelatin exhibit rubber-like behavior.     

Structural characteristics and rheological properties of partially hydrolyzed oat β-glucan: the effects of molecular weight and hydrolysis method

Partial hydrolysates of (1→3)(1→4)-β- -glucan from oats were produced by three hydrolysis methods: acid, cellulase or lichenase. The molecular weights ranged from 31 000 to 237 000 g/mol. Six percent solutions of small molecular weight β-glucans formed elastic gels after 4 days at 4 °C whereas larger molecular weight β-glucans remained viscous liquids after 7 days. The melting temperature of the gels increased as they aged and the peak heat flow temperature, measured by differential scanning calorimetry, was 62±2 °C. Partial hydrolysates produced with cellulase, which was shown to preferentially cleave regions of the molecule with longer contiguous β-(1→4)-linked -glucopyranosyl units, tended to produce more elastic gels with stronger junction zones than partial hydrolysates produced with lichenase which cleaves the β-(1→4) glycosidic 3-o-substituted glucose links. This suggests that β-(1→3)-linked cellotriose sections of the polymer are probably the segments which form the junction zones in the gel network rather than cellulose-like segments.     

Effects of Pro-Hyp,a Collagen Hydrolysate-Derived Peptide,on Hyaluronic Acid Synthesis Using in Vitro Cultured Synovium Cells and Oral Ingestion of Collagen Hydrolysates in a Guinea Pig Model of Osteoarthritis

Proline-hydroxyproline (Pro-Hyp) stimulated hyaluronic acid production in cultured synovium cells. It was detected in guinea pig blood after oral ingestion of collagen hydrolysates. Oral administration of collagen hydrolysates increased the amount of proteoglycans in the epiphyses. It also reduced the morphological changes associated with osteoarthritic cartilage destruction of the knee joint. The results suggest that collagen hydrolysates have therapeutic potential for treatment of osteoarthritis.     

Effects of Pro-Hyp, a collagen hydrolysate-derived peptide, on hyaluronic acid synthesis using in vitro cultured synovium cells and oral ingestion of collagen hydrolysates in a guinea pig model of osteoarthritis

Proline-hydroxyproline (Pro-Hyp) stimulated hyaluronic acid production in cultured synovium cells. It was detected in guinea pig blood after oral ingestion of collagen hydrolysates. Oral administration of collagen hydrolysates increased the amount of proteoglycans in the epiphyses. It also reduced the morphological changes associated with osteoarthritic cartilage destruction of the knee joint. The results suggest that collagen hydrolysates have therapeutic potential for treatment of osteoarthritis.     

Preparative electrophoresis on agarose submerged gels of two aggregating proteoglycan monomers from articular cartilage

Analytical electrophoresis on polyacrylamide-agarose gels of aggregating proteoglycan monomers from baboon articular cartilage produces two distinct bands, corresponding to two different aggregating monomer populations. A preparative electrophoresis procedure is described for isolating the two monomers. Proteoglycans were extracted from young baboon articular cartilage in 4 M guanidinium chloride containing proteolysis inhibitors and aggregated after hyaluronic acid addition. The aggregates were separated from non-aggregated proteoglycans by isopycnic centrifugation, followed by gel chromatography on Sepharose CL-2B. The monomers of the aggregates were obtained by isopycnic centrifugation under dissociative conditions. Two monomers were separated by preparative electrophoresis on 0.8 % agarose submerged gels. Approximately 60 % of the proteoglycans were recovered from the gel using a freeze-squeeze procedure. Aliquots of the separated monomers gave single bands when submitted to analytical polyacrylamide-agarose gel electrophoresis. Their migration and appearance were similar to that of the two bands present in the non separated preparation of monomers.     

A new angiosperms molecular specimen treatment method for field use

Aims This study aims to identify a more convenient drying method for obtaining molecular specimen of angiosperms in the field than the conventional silica gel drying method. Methods The leaves of Prunus serrulata var. lannesiana and Liriope spicata were dried under temperatures of 150 °C, 80 °C, 40 °C as well as under natural conditions, and by the silica gel drying method, respectively. The DNA extracts of various specimens were then analyzed using techniques of spectrophotometer detection, electrophoresis and PCR to evaluate the impacts of different drying treatments to the genomic DNA of testing plants. Important findings The concentrations of total DNA were higher for the specimens dried at 40 °C treatment and by the silica gel drying method than other treatments when assessed by the techniques of spectrophotometer detection and electrophoresis. The concentration of PCR products was highest in the specimens dried at 40 °C. Based on the results, the 40 °C drying can be recommended for obtaining molecular specimens of angiosperms because of its minimum degree of degradation, for convenience of operation and avoiding carrying large amounts of silica gel in field investigations.