Interactions between motile Escherichia coli and glass in media with various ionic strengths, as observed with a three-dimensional-tracking microscope.

Escherichia coli bacteria have been observed to swim along a glass surface for several minutes at a time. Settling velocities of nonmotile cells and a computer simulation of motile cells confirmed that an attractive force kept the bacteria near the surface. The goal of this study was to evaluate whether this attractive force could be explained by reversible adhesion of E. coli to the surface in the secondary energy minimum, according to the theory of Derjaguin, Landan, Verwey, and Overbeek (DLVO theory). This theory describes interactions between colloidal particles by combining attractive van der Waals forces with repulsive electrostatic forces. A three-dimensional-tracking microscope was used to follow both wild-type and smooth-swimming E. coli bacteria as they interacted with a glass coverslip in media of increasing ionic strengths, which corresponded to increasing depths of the secondary energy minimum. We found no quantifiable changes with ionic strength for either the tendencies of individual bacteria to approach the surface or the overall times bacteria spent near the surface. One change in bacterial behavior which was observed with the change in ionic strength was that the diameters of the circles which the smooth-swimming bacteria traced out on the glass increased in low-ionic-strength solution.     

Effects of charged amino acids at b and c heptad positions on specificity and stability of four-chain coiled coils

An understanding of the balance of chemical forces responsible for protein stability and specificity of structure is essential for the success of efforts in protein design. Specifically, electrostatic interactions between charged amino acids have been explored extensively to understand the contribution of this force to protein stability. Much research on the importance of electrostatic interactions as specificity and stability determinants in two-stranded coiled coils has been done, but there remains significant controversy about the magnitude of the attractive forces using such systems. We have developed a four-stranded coiled-coil system with charged residues incorporated at b and c heptad positions to explore the role of charge interactions. Here, we test quantitatively the effects of varying sidechain length on the magnitude of such electrostatic interactions. We synthesized peptides containing either aspartate or ornithine at both b and c heptad positions and tested their ability to self-associate and to hetero-associate with one another and with peptides containing glutamate or lysine at the same positions. We find that interactions between glutamate and either lysine or ornithine are more favorable than the corresponding interactions involving aspartate. In each case, charged interactions provide additional stability to coiled coils, although helix propensity effects may play a significant role in determining the overall stability of these structures.     

Electrodynamics of Lipid Membrane Interactions in the Presence of Zwitterionic Buffers

Due to thermal motion and molecular polarizability, electrical interactions in biological systems have a dynamic character. Zwitterions are dipolar molecules that typically are highly polarizable and exhibit both a positive and a negative charge depending on the pH of the solution. We use multilamellar structures of common lipids to identify and quantify the effects of zwitterionic buffers that go beyond the control of pH. We use the fact that the repeat spacing of multilamellar lipid bilayers is a sensitive and accurate indicator of the force balance between membranes. We show that common buffers can in fact charge up neutral membranes. However, this electrostatic effect is not immediately recognized because of the concomitant modification of dispersion (van der Waals) forces. We show that although surface charging can be weak, electrostatic forces are significant even at large distances because of reduced ionic screening and reduced van der Waals attraction. The zwitterionic interactions that we identify are expected to be relevant for interfacial biological processes involving lipid bilayers, and for a wide range of biomaterials, including amino acids, detergents, and pharmaceutical drugs. An appreciation of zwitterionic electrodynamic character can lead to a better understanding of molecular interactions in biological systems and in soft materials in general.     

Evaluation of intermolecular forces in a circulating system

Intercellular interactions, which are mediated by a variety of complex intercellular molecules through the processes of formation and dissociation of molecular bonds, play a critical role in regulating cellular functions in biological systems. Various approaches are applied to evaluate intercellular or molecular bonding forces. To quantify the intermolecular interaction forces, flow chamber has become a meaningful technique as it can ultimately mimic the cellular microenvironment in vivo under physiological flow conditions. Hydrodynamic forces are usually used to predict the intercellular forces down to the single molecular level. However, results show that only using hydrodynamic force will overestimate up to 30% of the receptor-ligand strength when the non-specific forces such as Derjaguin-Landau-Verway-Overbeek (DLVO) forces become un-neglected. Due to the nature of high ion concentration in the physiological condition, electrostatic force is largely screened which will cause DLVO force unbalanced. In this study, we propose to take account of the DLVO force, including van der Waals (VDW) force and electrostatic force, to predict the intermolecular forces of a cell doublet and cell-substrate model in a circulating system. Results also show that the DLVO force has a nonlinear effect as the cell-cell or cell-substrate distance changes. In addition, we used the framework of high accuracy hydrodynamic theories proved in colloidal systems. It is concluded that DLVO force could not be ignored in quantitative studies of molecular interaction forces in circulating system. More accurate prediction of intercellular forces needs to take account of both hydrodynamic force and DLVO force.     

Surface interaction forces of cellulose nanocrystals grafted with thermoresponsive polymer brushes

The colloidal stability and thermoresponsive behavior of poly(N-isopropylacrylamide) brushes grafted from cellulose nanocrystals (CNCs) of varying graft densities and molecular weights was investigated. Indication of the grafted polymer brushes was obtained after AFM imaging of CNCs adsorbed on silica. Also, aggregation of the nanoparticles carrying grafts of high degree of polymerization was observed. The responsiveness of grafted CNCs in aqueous dispersions and as an ultrathin film was evaluated by using light scattering, viscosimetry, and colloidal probe microscopy (CPM). Light transmittance measurements showed temperature-dependent aggregation originating from the different graft densities and molecular weights. The lower critical solution temperature (LCST) of grafted poly(NiPAAm) brushes was found to decrease with the ionic strength, as is the case for free poly(NiPAAm) in aqueous solution. Thermal responsive behavior of grafted CNCs in aqueous dispersions was observed by a sharp increase in dispersion viscosity as the temperature approached the LCST. CPM in liquid media for asymmetric systems consisting of ultrathin films of CNCs and a colloidal silica probe showed the distinctive effects of the grafted polymer brushes on interaction and adhesive forces. The origin of such forces was found to be mainly electrostatic and steric in the case of bare and grafted CNCs, respectively. A decrease in the onset of attractive and adhesion forces of grafted CNCs films were observed with the ionic strength of the aqueous solution. The decreased mobility of polymer brushes upon partial collapse and decreased availability of hydrogen bonding sites with higher electrolyte concentration were hypothesized as the main reasons for the less prominent polymer bridging between interacting surfaces.     

Force Balances in Systems of Cylindrical Polyelectrolytes

A detailed analysis is made of the model system of two parallel cylindrical polyelectrolytes which contain ionizable groups on their surfaces and are immersed in an ionic bathing medium. The interaction between the cylinders is examined by considering the interplay between repulsive electrostatic forces and attractive forces of electrodynamic origin. The repulsive force arises from the screened coulomb interaction between the surface charge distributions on the cylinders and has been treated by developing a solution to the linearized Poisson-Boltzmann equation. The boundary condition at the cylinder surfaces is determined as a self-consistent functional of the potential, with the input consisting of the density of ionizable groups and their dissociation constants. It is suggested that a reasonably accurate representation for the form of the attractive force can be obtained by performing a pairwise summation of the individual interatomic forces. A quantitative estimate is obtained using a Hamaker constant chosen on the basis of rigorous calculations on simpler systems. It is found that a balance exists between these repulsive and attractive forces at separations in good agreement with those observed in arrays of tobacco mosaic virus and in the A band myosin lattice in striated muscle. The behavior of the balance point as a function of the pH and ionic strength of the bathing medium closely parallels that seen experimentally.     

Partitioning of amino acids in the aqueous biphasic system containing the water‐miscible ionic liquid 1‐butyl‐3‐methylimidazolium bromide and the water‐structuring salt potassium citrate

In biotechnology, extraction by means of aqueous biphasic systems (ABS) is known as a promising tool for the recovery and purification of bio‐molecules. Over the past decade, the increasing emphasis on cleaner and environmentally benign extraction procedures has led to enhanced interest in the ABS containing ionic liquids (ILs)—a new class of non‐volatile alternative solvents. ABS composed of the hydrophilic IL {1‐butyl‐3‐methylimidazolium bromide ([C₄mim]Br)} and potassium citrate—which is easily degraded—represents a clean media to green separation of bio‐molecules. In this regard, here, the extraction capability of this ABS was evaluated through its application to the extraction of some amino acids. To gain an insight into the driving forces of amino acid partitioning in the studied IL ‐based ABS, the distribution of five model amino acids (L ‐tryptophan, L ‐phenylalanine, L ‐tyrosine, L ‐leucine, and L ‐valine) at different aqueous medium pH values and different phase compositions was investigated. The studies indicated that hydrophobic interactions were the main driving force, although electrostatic interactions and salting‐out effects were also important for the transfer of the amino acids. Moreover, based on the statistical analysis of the driving forces of amino acid partitioning in the studied IL ‐based ABS, a model was established to describe the partition coefficient of three model amino acids, L ‐tryptophan, L ‐phenylalanine, and L ‐valine, and employed to predict the partition coefficient of two other model amino acids, L ‐tyrosine and L ‐leucine. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011     

Correlation between surface morphology and surface forces of protein A adsorbed on mica.

We have investigated the morphology and surface forces of protein A adsorbed on mica surface in the protein solutions of various concentrations. The force-distance curves, measured with a surface force apparatus (SFA), were interpreted in terms of two different regimens: a "large-distance" regimen in which an electrostatic double-layer force dominates, and an "adsorbed layer" regimen in which a force of steric origin dominates. To further clarify the forces of steric origin, the surface morphology of the adsorbed protein layer was investigated with an atomic force microscope (AFM) because the steric repulsive forces are strongly affected by the adsorption mode of protein A molecules on mica. At lower protein concentrations (2 ppm, 10 ppm), protein A molecules were adsorbed "side-on" parallel to the mica surfaces, forming a monolayer of approximately 2.5 nm. AFM images at higher concentrations (30 ppm, 100 ppm) showed protruding structures over the monolayer, which revealed that the adsorbed protein A molecules had one end oriented into the solution, with the remainder of each molecule adsorbed side-on to the mica surface. These extending ends of protein A overlapped each other and formed a "quasi-double layer" over the mica surface. These AFM images proved the existence of a monolayer of protein A molecules at low concentrations and a "quasi-double layer" with occasional protrusions at high concentrations, which were consistent with the adsorption mode observed in the force-distance curves.     

Interaction forces and morphology of a protein-resistant poly(ethylene glycol) layer

The molecular interactions on a protein-resistant surface coated with low-molecular-weight poly(ethylene glycol) (PEG) copolymer brushes are investigated using the extended surface forces apparatus. The observed interaction force is predominantly repulsive and nearly elastic. The chains are extended with respect to the Flory radius, which is in agreement with qualitative predictions of scaling theory. Comparison with theory allows the determination of relevant quantities such as brush length and adsorbed mass. Based on these results, we propose a molecular model for the adsorbed copolymer morphology. Surface-force isotherms measured at high resolution allow distinctive structural forces to be detected, suggesting the existence of a weak equilibrium network between poly(ethylene glycol) and water--a finding in accordance with the remarkable solution properties of PEG. The occurrence of a fine structure is interpreted as a water-induced restriction of the polymer's conformational space. This restriction is highly relevant for the phenomenon of PEG protein resistance. Protein adsorption requires conformational transitions, both in the protein as well as in the PEG layer, which are energetically and kinetically unfavorable.     

Dendritic star polymers for efficient DNA binding and stimulus-dependent DNA release

Water-soluble core-shell star polymers consisting of a dendritic polyphenylene core and an outer shell containing a defined number of amino groups have been synthesized via atom transfer radical polymerization (ATRP). All macromolecules efficiently interacted with a diverse set of DNA fragments, and stable complexes were formed and visualized by atomic force microscopy. The observed tight binding of DNA, which was found in the sub-nanomolar range, was mainly attributed to strong electrostatic interactions. Complex stoichiometries between the polyelectrolytes were controlled via the number of amino groups of the star polymers, and well-defined nanoscopic architectures were formed. DNA was released from the complexes after treatment with high concentrations of sodium chloride in aqueous solution. Such star polymers, which allow the binding and release of DNA, represent attractive candidates for the development of novel anion-exchange resins for DNA purification or as nonviral vector systems for gene delivery.     

Spatially resolved force spectroscopy of biological surfaces using the atomic force microscope

The spatial distribution of intermolecular forces governs macromolecular interactions. The atomic force microscope, a relatively new tool for investigating interaction forces between nanometer-scale objects, can be used to produce spatially resolved maps of the surface or material properties of a sample; these include charge density, adhesion and stiffness, as well as the force required to break specific ligand-receptor bonds. Maps such as these will provide fundamental insights into biological structure and will become an important tool for characterizing technologically important biological systems.     

Direct force measurements between cellulose surfaces and colloidal silica particles

The interaction of cellulose layers with colloidal silica particles was investigated by direct force measurements with the atomic force microscope (AFM). Upon approach, repulsive forces were found between the negatively charged silica particles and the cellulose surface. The forces were interpreted quantitatively in terms of electrostatic interactions due to overlap of diffuse layers originating from negatively charged carboxylic groups on the cellulose surface. The diffuse layer charge density of cellulose was estimated to be 0.80 mC/m2 at pH 9.5 and 0.21 mC/m2 at pH 4. The forces upon retraction are characterized by molecular adhesion events, whereby individual cellulose chains desorb from the probe surface. The retraction profiles are dominated by well-defined force plateaus, which correspond to single-chain desorption forces of 35-42 pN. We surmise that adsorption of cellulose to probe surfaces is dominated by nonelectrostatic forces, probably originating from hydrogen bonding. Electrostatic contributions to desorption force could be detected only at high pH, where the silica surface is highly charged.     

Calcite precipitation by marine bacteria∗

At the most fundamental level, inter- and intramolecular forces delineate the interface between a microorganism and a mineral surface. A new technique, termed biological force microscopy (BFM), is described that can be used to directly probe the dynamics of the mineral-microbe interface. BFM quantifies attractive and repulsive forces in the nano-Newton range between living microbial cells and mineral surfaces in aqueous solution. Native bacterial cells are linked to a force-sensor that is used in a force microscope to measure bacteria-mineral interactions as a function of the distance between the mineral surface and the cells on the sensor. The magnitudes and ranges of the measured forces reflect the chemical and structural intricacies of the mineral-microbe interface. BFM is presented with potential applications to studies assessing the role that microbes or biomolecules play in geochemical and mineralogical processes.     

Exchangeable Colloidal AFM Probes for the Quantification of Irreversible and Long-Term Interactions

An original method is presented to study single-colloid interaction with a substrate in liquid environment. Colloids, either in solution or adsorbed on a surface, are fixed by suction against the aperture of a microchanneled atomic force microscopy cantilever. Their adhesion to the substrate is measured, followed by their release via a short overpressure surge. Such colloid exchange procedure allows for 1), the quick variation of differently functionalized colloids within the same experiment; 2), the investigation of long-term interactions by leaving the colloids on a surface for a defined time before detaching them; and 3), the inspection of irreversible interactions. After validation of the method by reproducing literature results obtained with traditional colloidal atomic force microscopy, the serial use of colloids with different surface functionalization was shown on a micropatterned surface. Finally, concanavalin A-coated colloids were allowed to adsorb on human embryonic kidney cells and then detached one by one. The adhesion between cells and colloids was up to 60 nN, whereas individual cells adhered with 20 nN to the glass substrate. A cellular elastic modulus of 0.8 kPa was determined using the attached colloid as indenter.     

Adsorption characteristics of lignosulfonates in salt-free and salt-added aqueous solutions

Five sodium lignosulfonate (SL) fractions with narrow molecular weight distribution and known salt content were used as the polyanion to build up layer-by-layer self-assembly multilayers with poly(diallyldimethylammonium chloride) (PDAC) as polycation. It is interesting to find that the salt-free SL is hardly adsorbed on the PDAC surface, but the SL in salt-added solutions can be self-assembled well with PDAC to form SL/PDAC multilayers. When the five SL fractions dissolved in saline solutions are adsorbed on the PDAC surface by a self-assembly technique, SL with higher M(w) shows a higher adsorption amount than does SL with lower M(w). The driving forces of self-assembly of SL and PDAC are discussed based on the solution behaviors and adsorption characteristics of SL in salt-free and salt-added aqueous solutions. A possible self-assembled mechanism of SL and PDAC is electrostatic or cation-π interactions, but the SL cannot be adsorbed onto the PDAC surface without a hydrophobic interaction. With the addition of enough salt, the Coulomb interaction of SL becomes negligible, but the adsorption amount increases, indicating that the electrostatic interaction is not the main driving force of SL/PDAC self-assembly. For adsorption of SL in saline solution onto the PDAC surface, the cation-π interaction is the main driving force, and the hydrophobic interaction plays an important role in the adsorbed amount.     

Differences between non-specific and bio-specific, and between equilibrium and non-equilibrium, interactions in biological systems

The interaction forces between biological molecules and surfaces are much more complex than those between non-biological molecules or surfaces, such as colloidal particle surfaces. This complexity is due to a number of factors: (i) the simultaneous involvement of many different molecules and different non-covalent forces - van der Waals, electrostatic, solvation (hydration, hydrophobic), steric, entropic and 'specific', and (ii) the flexibility of biological macromolecules and fluidity of membranes. Biological interactions are better thought of as 'processes' that evolve in space and time and, under physiological conditions, involve a continuous input of energy. Such systems are, therefore, not at thermodynamic equilibrium, or even tending towards equilibrium. Recent surface forces apparatus (SFA) and atomic force microscopy (AFM) measurements on supported model membrane systems (protein-containing lipid bilayers) illustrate these effects. It is suggested that the major theoretical challenge is to establish manageable theories or models that can describe the spatial and time evolution of systems consisting of different molecules subject to certain starting conditions or energy inputs.     

Investigating the parameters affecting the adsorption of amino acids onto AgCl nanoparticles with different surface charges

In this paper, adsorption behaviors of typical neutral (alanine), acidic (glutamic acid) and basic (lysine) amino acids onto the surfaces of neutral as well as positively and negatively charged silver chloride nanoparticles were examined. Silver chloride nanoparticles with different charges and different water content were synthesized by reverse micelle method. The adsorptions of the above mentioned amino acids onto the surfaces of differently charged silver chloride nanoparticles were found to depend strongly on various parameters including pH of the aqueous solution, type of amino acid, water to surfactant mole ratio, and type of charges on the surfaces of silver chloride nanoparticles. It was found that the interaction of –NH₃ ⁺ groups of the amino acids with silver ion could be a driving force for adsorption of amino acids. Alanine and Glutamic acid showed almost similar trend for being adsorbed on the surface of silver chloride nanoparticles. Electrostatic interaction, hydrophobicity of both nanoparticle and amino acid, complex formation between amine group and silver ion, interaction between protonated amine and silver ion as well as the number of nanoparticles per unit volume of solution were considered for interpreting the observed results.     

Role of amino acid insertions on intermolecular forces between arginine peptide condensed DNA helices: implications for protamine-DNA packaging in sperm

In spermatogenesis, chromatin histones are replaced by arginine-rich protamines to densely compact DNA in sperm heads. Tight packaging is considered necessary to protect the DNA from damage. To better understand the nature of the forces condensing protamine-DNA assemblies and their dependence on amino acid content, the effect of neutral and negatively charged amino acids on DNA-DNA intermolecular forces was studied using model peptides containing six arginines. We have previously observed that the neutral amino acids in salmon protamine decrease the net attraction between protamine-DNA helices compared with the equivalent homo-arginine peptide. Using osmotic stress coupled with x-ray scattering, we have investigated the component attractive and repulsive forces that determine the net attraction and equilibrium interhelical distance as a function of the chemistry, position, and number of the amino acid inserted. Neutral amino acids inserted into hexa-arginine increase the short range repulsion while only slightly affecting longer range attraction. The amino acid content alone of salmon protamine is enough to rationalize the forces that package DNA in sperm heads. Inserting a negatively charged amino acid into hexa-arginine dramatically weakens the net attraction. Both of these observations have biological implications for protamine-DNA packaging in sperm heads.     

Interactions between adsorbed layers of alphaS1-casein with covalently bound side chains: a self-consistent field study

The effect on the adsorbed layer properties of the modification of alpha S1-casein by covalent bonding with an uncharged polysaccharide side chain has been investigated using lattice-based self-consistent field (SCF) theory. Interactions between two hydrophobic planar surfaces coated by a layer of adsorbed modified alpha S1-casein have been studied as a function of pH and ionic strength. While the interactions of the unmodified alpha S1-casein layers become attractive at high ionic strength, it has been shown that the presence of polysaccharide attachment to the alpha S1-casein molecule can confer net repulsive interactions over a wide range of salt concentration. The disordered protein is represented as a linear flexible polyampholyte with a sequence of hydrophobic, polar, and charged units based on the known alpha S1-casein primary structure. The hydrophilic side chain is attached at various fixed positions along the casein backbone. Different lengths and locations of the attached polysaccharide side chain are examined. Interfacial structures and colloidal stability properties of the system are determined, including the surface-surface interaction potential, the extent of protein bridging, and the distribution of protein segments from the surface under different conditions of pH and ionic strength. It has been found that the covalent bonding of short hydrophilic chains may not only enhance but can also worsen the colloidal stabilizing properties of the modified protein, depending on the position of the attachment.     

Primordial Coding of Amino Acids by Adsorbed Purine Bases

Scanning tunneling microscopy and chromatography experiments exploring the potential templating properties of nucleic acid bases adsorbed to the surface of crystalline graphite, revealed that the interactions of amino acids with the bare crystal surface are significantly modulated by the prior adsorption of adenine and hypoxanthine. These bases are the coding elements of a putative purine-only genetic alphabet and the observed effects are different for each of the bases. Such mapping between bases and amino acids provides a coding mechanism. These observations demonstrate that a simple pre-RNA amino acid discrimination mechanism could have existed on the prebiotic Earth providing critical functionality for the origin of life.