The acylated precursor form of the colicin A lysis protein is a natural substrate of the DegP protease.

The acylated precursor form of the colicin A lysis protein (pCalm) is specifically cleaved by the DegP protease into two acylated fragments of 6 and 4.5 kilodaltons (kDa). This cleavage was observed after globomycin treatment, which inhibits the processing of pCalm into mature colicin A lysis protein (Cal) and the signal peptide. The cleavage took place in lpp, pldA, and wild-type strans carrying plasmids which express the lysis protein following SOS induction and also in cells containing a plasmid which expresses it under the control of the tac promoter. Furthermore, the DegP protease was responsible for the production of two acylated Cal fragments of 3 and 2.5 kDa in cells carrying plasmids which overproduce the Cal protein, without treatment with globomycin. DegP could also cleave the acylated precursor form of a mutant Cal protein containing a substitution in he amino-terminal portion of the protein, but not that of a mutant Cal containing a frameshift mutation in its carboxyl-terminal end. The functions of Cal in causing protein release, quasi-lysis, and lethality were increased in degP41 cells, suggesting that mature Cal was produced in higher amounts in the mutant than in the wild type. These effects were limited in cells deficient in phospholipase A. Interactions between the DegP protease and phospholipase A were suggested by the characteristics of degP pldA double mutants.     

Formation of diacylglycerol by a phospholipase D-phosphatidate phosphatase pathway specific for phosphatidylcholine in endothelial cells

The conversion of phosphatidylcholine (PC) to diacylglycerol (DAG) was studied in sonicated endothelial cells and in subcellular fractions in the presence of 0.05% Triton X-100 and 2 mM EDTA. DAG formation occurred predominantly in an organelle fraction that sedimented at 15,000 x g. In parallel reactions with exogenous 1-oleoyl-2-[3H]oleoyl-PC (sn-2-[3H]DOPC) and phosphatidyl[3H]choline ([choline-3H]PC), [3H]DAG was formed by a reaction pathway in which [3H]choline was the only product derived from [choline-3H]PC. [3H]Choline was not formed secondarily from [3H]glycerophosphocholine or [3H]phosphocholine. Small amounts of [3H]phosphatidate ([3H]PA) were isolated from reactions with sn-2-[3H]DOPC at short incubation times, and substantial PA phosphatase activity was demonstrated. These data, taken together, supported a phospholipase D-PA phosphatase pathway of DAG formation. Kinetic data established that the low ratio of [3H]PA/[3H]DAG formed in reactions with sn-2-[3H]DOPC was due to a 15-fold higher Vmax and 7-fold lower apparent Km of the PA phosphatase. The [3H]PA/[3H]DAG product ratio was increased by addition of unlabeled PA or by selective extraction of phospholipase D with Triton X-100. The characteristics of the phospholipase D indicated a unique enzyme. Activity was optimal in the presence of EDTA and was almost totally dependent upon Triton X-100. The pH profile displayed a peak at 7.0. Of particular significance was the stringent substrate specificity. Phosphatidylinositol was not hydrolyzed, and activities towards phosphatidylethanolamine and sphingomyelin were at most 30- to 50-fold lower than those towards PC. Phospholipase D and PA phosphatase were identified in a number of rat tissues and other cells. The highest activities of phospholipase D were present in lung and endothelial cells. Phospholipase D was partially purified from rat lung by Triton X-100 extraction and anion exchange chromatography. When linked with PA phosphatase, the phospholipase D could initiate a pathway of DAG formation that is highly specific for PC.     

Effect of Ethylenediaminetetraacetic Acid, Triton X-100, and Lysozyme on the Morphology and Chemical Composition of Isolated Cell Walls of Escherichia coli

Extraction of a partially purified preparation of cell walls from Escherichia coli with the nonionic detergent Triton X-100 removed all cytoplasmic membrane contamination but did not affect the normal morphology of the cell wall. This Triton-treated preparation, termed the “Triton-insoluble cell wall,” contained all of the protein of the cell wall but only about half of the lipopolysaccharide and one-third of the phospholipid of the cell wall. This Triton-insoluble cell wall preparation was used as a starting material in an investigation of several further treatments. Reextraction of the Triton-insoluble cell wall with either Triton X-100 or ethylenediaminetetraacetic acid (EDTA) caused no further solubilization of protein. However, when the Triton-insoluble cell wall was extracted with a combination of Triton X-100 and EDTA, about half of the protein and all of the remaining lipopolysaccharide and phospholipid were solubilized. The material which remained insoluble after this combined Triton and EDTA extraction still retained some of the morphological features of the intact cell wall. Treatment of the Triton-insoluble cell wall with lysozyme resulted in a destruction of the peptidoglycan layer as seen in the electron microscope and in a release of diaminopimelic acid from the cell wall but did not solubilize any cell wall protein. Extraction of this lysozyme-treated preparation with a combination of Triton X-100 and EDTA again solubilized about half of the cell wall protein but resulted in a drastic change in the morphology of the Triton-EDTA-insoluble material. After this treatment, the insoluble material formed lamellar structures. These results are interpreted in terms of the types of noncovalent bonds involved in maintaining the organized structure of the cell wall and suggest that the main forces involved are hydrophobic protein-protein interactions between the cell wall proteins and to a lesser degree a stabilization of protein-protein and protein-lipopolysaccharide interactions by divalent cations. A model for the structure of the E. coli cell wall is presented.     

Phospholipase-A-independent damage caused by the colicin A lysis protein during its assembly into the inner and outer membranes of Escherichia coli

The requirement for the activation of phospholipase A by the colicin A lysis protein (Cal) in the efficient release of colicin A by Escherichia coli cells containing colicin A plasmids was studied. In particular, we wished to determine if this activation is the primary effect of Cal or whether it reflects more generalized damage to the envelope caused by the presence of large quantities of this small acylated protein. E. coli tolQ cells, which were shown to be leaky for periplasmic proteins, were transduced to pldA and then transformed with the recombinant colicin A plasmid pKA. Both the pldA and pldA+ strains released large quantities of colicin A following induction, indicating that in these cells phospholipase A activation is not required for colicin release. This release was, however, still dependent on a functioning Cal protein. The assembly and processing of Cal in situ in the cell envelope was studied by combining pulse-chase labelling with isopycnic sucrose density gradient centrifugation of the cell membranes. Precursor Cal and lipid-modified precursor Cal were found in the inner membrane at early times of chase, and gave rise to mature Cal which accumulated in both the inner and outer membrane after further chase. The signal peptide was also visible on these gradients, and its distribution too was restricted to the inner membrane. Gradient centrifugation of envelopes of cells which were overproducing Cal resulted in very poor separation of the membranes. The results of these studies provide evidence that the colicin A lysis protein causes phospholipase A-independent alterations in the integrity of the E. coli envelope.(ABSTRACT TRUNCATED AT 250 WORDS)     

Sensitivity of Escherichia coli cell membranes to various classes of detergents

The mechanisms of interaction between non-ionic or cationic surfactants with Escherichia coli K-12 cell membranes were studied using an approach based on the registration of changes in the membrane permeability to ethidium bromide, a fluorescent dye for nucleic acids. Triton X-100, a non-ionic detergent, was shown to exert no effect on the permeability of intact cell membranes. Triton X-100 interacted with the bacteria only after treatment with EDTA, a complexing agent for bivalent cations. Cetyltrimethyl ammonium bromide increased the permeability to ethidium bromide and the action of this cationic detergent did not require the pretreatment with the complexing agent. SDS, an anionic detergent, damaged E. coli K-12 and this could be registered by the lowering of intensity of light scattering by the bacterial suspension. The surface charge of E. coli K-12 cells was shown to influence the interaction of ionic detergents with bacterial cell membranes. Its variation by changing the pH of the incubation medium did not make E. coli K-12 sensitive to Triton X-100.     

Colicin E2 production and release by Escherichia coli K12 and other Enterobacteriaceae

Previous work has shown that Escherichia coli K12 ColE2+ cells undergo a form of partial lysis and exhibit increases in lysophosphatidylethanolamine (lysoPE) and free fatty acid content due to activation of phospholipase A when induced to produce and release colicin E2. The increase in lysoPE content was assumed to be essential for efficient colicin release. These same characteristics are also presented by some natural ColE2+ isolates, and by other representatives of the Enterobacteriaceae after transformation with derivatives of a ColE2 plasmid. However, Salmonella typhimurium strains carrying ColE2 plasmids released colicin without partial lysis and without increasing their lysoPE content. A previously undetected minor phospholipid, which appeared in these and other strains only when they were induced to produce colicin, may be an important factor in colicin release. In ColE2+ E. coli K12, production of this new lipid was dependent on phospholipase A activation following expression of the ColE2 lysis gene. Some other ColE2+ strains did not respond to induction of colicin production in the same way as ColE2+ E. coli K12. These strains were less sensitive to inducer (mitomycin C) or unable to produce increased amounts of colicin in response to induction, or unable to degrade colicin once it was released. In general, the results suggest that colicin release occurs by the same or similar processes in the various strains tested, and support the continued use of E. coli K12 as the model strain for studying the mechanisms of colicin release.     

Ferric enterobactin transport system in Escherichia coli K-12. Extraction, assay, and specificity of the outer membrane receptor.

An outer membrane preparation from cells of Escherichia coli K-12 grown in low iron medium was found to retain ferric enterobactin binding activity following solubilization in a Tris-HCl, Na2EDTA buffer containing Triton X-100. Activity was measured by means of a DEAE-cellulose column which separated free and receptor bound ferric enterobactin. The binding activity was greatly reduced in preparations obtained from cells grown in iron rich media or from cells of a colicin B resistant mutant grown in either high or low iron media. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis enabled correlation of this lack of activity to a single band missing in the outer membrane profile of the colicin B mutant. Evidence was obtained for in vitro competition between ferric enterobactin and colicin B for the extracted receptor. The binding specificity of the extracted receptor was examined by competition between ferric enterobactin and several iron chelates including a carbocyclic analogue of enterobactin, cis-1,5,9-tris(2,3-dihydroxybenzamido)cyclododecane. The ferric form of the latter compound supported growth of siderophore auxotrophs, apparently without hydrolysis to dihydroxybenzoic acid and resynthesis into enterobactin. These data may require revision of the accepted mechanism of enterobactin mediated iron utilization.     

Rapid protein release from Escherichia coli by chemical permeabilization under fermentation conditions

Overall protein release greater than 75% in less than 1 h can be attained by exposing exponentially growing Escherichia coli cells to 0.4 M guanidine plus 0.5% Triton X-100 at 37 degrees C in medium. Cell growth stops immediately upon addition of the chemicals, but the cells are not lysed. Guanidine concentrations lower than 0.2 M, in conjunction with 0.5% Triton X-100, do not release significant intracellular protein, nor do they inhibit cell growth. Under these conditions, the cells undergo an adaptation that confers resistance to protein release by further treatment with guanidine and Triton X-100. Cells treated with 0.2 M guanidine plus 0.5% Triton X-100 display intermediate behavior. Protein release is approximately 35%, and growth is temporarily interrupted by an extended lag phase. Subsequent resumption of cell growth results in resistant cells and no additional protein release. This resistance is shown to be reversible and is most likely due to physiological adaptation rather than genetic mutation.     

Colicin E2 release: lysis,leakage or secretion? Possible role of a phospholipase.

Results presented here and by others indicate that the release of colicins from producing cells can be uncoupled from the decline in culture turbidity which usually occurs within 2-3 h after the induction of colicin synthesis. This excludes lysis as a necessary event in colicin release. Conversely, the failure to dissociate colicin release from the normally simultaneous release of a specific subset of soluble proteins argues against the idea of a specific colicin secretion system sensu-stricto. Rather, colicin release appears to be a consequence of semi-specific leakage resulting from an alteration of the permeability properties of the cell envelope. This alteration is caused by the 'lysis protein' known to be encoded by most multiple copy number Col plasmids. The finding that the expression of the lysis gene of plasmid ColE2 renders the cells exquisitely sensitive to lysozyme demonstrates that the permeability of the outer membrane must indeed be altered. Evidence is presented that this alteration could be due at least in part to the activation of the detergent-resistant phospholipase A (pldA product). Lysophosphatidylethanolamine, a product of the action of phospholipase on phosphatidylethanolamine, is a membrane perturbant which could alter the permeability properties of the envelope and allow some proteins such as colicin to leak out of the cell.     

Purification of the colicin I receptor

The colicin I outer membrane receptor was solubilized from the cell envelope of Escherichia coli K12 by extraction with Triton X-100 and purified to homogeneity by a combination of ion exchange and gel filtration chromatography as well as isoelectric focusing. The receptor was isolated as a single polypeptide and retained capacity to form a complex with pure colicin. The apparent molecular weight of the receptor as determined by polyacrylamide gel electrophoresis in sodium dodecy sulfate was 74,000 or 54,000 depending on whether the preparation was boiled or not in sodium dodecyl sulfate, respectively, prior to electrophoresis. Isoelectric focusing of the receptor in the presence of Triton X-100 revealed that the protein was slightly acidic (pI 4.75).     

1-Palmitoyl-2-thiopalmitoyl phosphatidylcholine, a highly specific chromogenic substrate of phospholipase A2

1-Palmitoyl-2-thiopalmitoyl phosphatidylcholine (2-thioPC), a structurally modified phospholipid analog is specifically hydrolyzed by phospholipase A2 to liberate 2-thiolysophosphatidylcholine and palmitic acid. The sulfhydryl group of the product is readily trapped by 5,5'-dithiobis (2-nitrobenzoic acid) allowing continuous spectrophotometric monitoring of the enzymatic reaction. The rates of hydrolysis by bee-venom phospholipase A2 have been determined in a series of Triton X-100 containing mixed micelles. At 1 mM 2-thioPC increasing the concentration of Triton X-100 from 4 to 16 mM changes the specific activity of bee-venom phospholipase A2 from 96.9 to 17.9 mumol/min/mg, about one order of magnitude lower than dipalmitoyl phosphatidylcholine hydrolysis in micelles of similar composition. The chromogenic substrate is the first phospholipid analog exhibiting absolute specificity for phospholipase A2 and should be applicable to spectrophotometric detection and kinetic characterization of both water soluble and membrane-bound forms.     

The effects of cations on the structure and photochemistry of the photosystem II core complex

We have studied the effects of cations and detergents on the structure (molecular weight) and photochemistry of Triton X-100 Photosystem II subchloroplast particles (TSF-IIa). The effect of Mg²⁺ ions on activity depended on the Triton X-100 content of the preparation. If the residual Triton X-100 was not removed prior to assay, MgCl₂ increased the rate of electron transport, acting at a site on the reducing side of Photosystem II. Lowering the pH also increased the rate of electron transport. If the Triton X-100 was removed from the particles, both MgCl₂ and NaCl caused a decrease in the rate of electron transport. Addition of Triton X-100 caused a reversible decrease in the number of active Photosystem II reaction centers. Both cations and Triton X-100 had a profound effect on the molecular weight of the Photosystem II particles as determined by gel filtration. At 20 °C, addition of 0.05% Triton X-100 decreased the molecular weight from a high value (≥800,000) to 250,000. At 4 °C, addition of 1 mm MgCl₂ or 100 mm NaCl increased the molecular weight of the complex. In the absence of these salts 67% of the protein eluted with a molecular weight of 460,000 (the rest was >800,000-in the void volume). In the presence of these salts all of the material had a molecular weight of ≥800,000. A similar effect was observed when the pH was lowered from 8 to 6. Further work is needed to determine whether there is a correlation between the changes in molecular weight and activity.     

Identification of the protein producing transmembrane diffusion pores in the outer membrane of Pseudomonas aeruginosa PA01.

The outer membrane of Pseudomonas aeruginosa PA01 is permeable to saccharides of molecular weights lower than about 6000. Triton X-100/EDTA-soluble outer membrane proteins were fractionated by ion-exchange chromatography in the presence of Triton X-100 and EDTA, and the protein contents of the various fractions analysed by sodium dodecyl sulphate polyacrylamide gel electrophoresis. Each of the major protein bands present in the Triton X-100/EDTA soluble outer membrane was separated from one another. Adjacent fractions were pooled, concentrated and extensively dialyzed to reduce the Triton X-100 concentration. Vesicles were reconstituted from lipopolysaccharide, phospholipids and each of these dialyzed fractions, and examined for their ability to retain [14C]sucrose. Control experiments indicated that the residual levels of Triton X-100 remaining in the dialyzed fractions had no effect on the formation or permeability to saccharides of the reconstituted vesicles. It was concluded that a major outer membrane polypeptide with an apparent weight of 35,000 is a porin, responsible for the size-dependent permeability of the outer membrane.     

High-level expression of the colicin A lysis protein

Summary Two plasmids that overproduce the colicin A lysis protein, Cal, are described. Plasmid AT1 was constructed by a deletion in the colicin A operon, which placed thecal gene near a truncatedcaa gene in such a way that both gene products were synthesized at high levels following induction. Plasmid Ck4 was constructed by insertion of thecal gene downstream from thetac promoter of an expression vector. Overproduction of Cal was obtained after mitomycin C induction of pAT1 cells and after IPTG induction of pCK4 cells. The kinetics of Cal synthesis were examined with [³⁵S] methionine and [2-³H] glycerol inlpp orlpp ⁺ host strains. Each of the steps of the lipid modification and maturation pathway of Cal was demonstrated. The modified precursor form of overproduced Cal was not chased as efficiently as when it is produced in pColA cells. After treatment with globomycin, a significant amount of this modified precursor form accumulated and was degraded with time into smaller acylated proteins, but without release of the signal peptide. Release of cellular proteins and quasi-lysis were observed after about 1 hour of induction for cells containing either plasmid. In addition, in Cal-overproducing cells, the rate of quasi-lysis was increased but not its extent. InpldA cells, quasi-lysis was reduced but not abolished. Lethality of the Cal induction in the overproducing cells was in the same range as that in wild-type cells.     

The inhibitory effects of polyoxyethylene detergents on human erythrocyte acetylcholinesterase and Ca2+ + Mg2+ ATPase

The activities of acetylcholinesterase and Ca2+ + Mg2+ ATPase were measured following treatment of human erythrocyte membranes with nonsolubilizing and solubilizing concentrations of Triton X-100. A concentration of 0.1% (v/v) Triton X-100 caused a significant inhibition of both enzymes. The inhibition appears to be caused by perturbations in the membrane induced by Triton X-100 incorporation. No acetylcholinesterase activity and little Ca2+ + Mg2+ ATPase activity were detected in the supernatant at 0.05% Triton X-100 although this same detergent concentration induced changes in the turbidity of the membrane suspension. Also, no inhibition of soluble acetylcholinesterase was observed over the entire detergent concentration range. The inhibition of these enzymes at 0.1% Triton X-100 was present over an eightfold range of membrane protein in the assay indicating an independence of the protein/detergent ratio. The losses in activities of these two enzymes could be prevented by either including phosphatidylserine in the Triton X-100 suspension or using Brij 96 which has the same polyoxyethylene polar head group but an oleyl hydrophobic tail instead of the p-tert-octylphenol group of Triton X-100. The results are discussed in regard to the differential recovery of enzyme activities over the entire detergent concentration range.     

Assembly of colicin A in the outer membrane of producing Escherichia coli cells requires both phospholipase A and one porin,but phospholipase A is sufficient for secretion

Three oligomeric forms of colicin A with apparent molecular masses of about 95 to 98 kDa were detected on sodium dodecyl sulfate (SDS)-polyacrylamide gels loaded with unheated samples from colicin A-producing cells of Escherichia coli. These heat-labile forms, called colicins Au, were visualized both on immunoblots probed with monoclonal antibodies against colicin A and by radiolabeling. Cell fractionation studies show that these forms of colicin A were localized in the outer membrane whether or not the producing cells contained the cal gene, which encodes the colicin A lysis protein responsible for colicin A release in the medium. Pulse-chase experiments indicated that their assembly into the outer membrane, as measured by their heat modifiable migration in SDS gels, was an efficient process. Colicins Au were produced in various null mutant strains, each devoid of one major outer membrane protein, except in a mutant devoid of both OmpC and OmpF porins. In cells devoid of outer membrane phospholipase A (OMPLA), colicin A was not expressed. Colicins Au were detected on immunoblots of induced cells probed with either polyclonal antibodies to OmpF or monoclonal antibodies to OMPLA, indicating that they were associated with both OmpF and OMPLA. Similar heat-labile forms were obtained with various colicin A derivatives, demonstrating that the C-terminal domain of colicin A, but not the hydrophobic hairpin present in this domain, was involved in their formation.     

Extraction and determination of adenosine 5'-triphosphate in bovine milk by the firefly luciferase assay

The release of ATP from somatic cells in milk with the detergent Triton X-100 was optimized for assay with firefly luciferase. A small volume of milk (40 microliters) is added to 0.8 ml of 0.2% Triton X-100 in 100 mM Tris, 4 mm EDTA, pH 7.8. After approximately 1 min, 0.2 ml of luciferase reagent is added and the emission of light is measured in a luminometer. Results are calibrated with an ATP standard. This single method gave high yields of ATP from somatic cells in milk without interference from bacterial ATP. Extracts could be stored or transported prior to assay without deterioration of results. A close correlation was found between somatic cell count and ATP in milk samples collected at a farm as well as in milk samples from a cow with experimental mastitis. Results are promising for future use for diagnosis of mastitis but further work and field testing has to be done before it can be used on a wider scale.     

Lipoprotein nature of the colicin A lysis protein: effect of amino acid substitutions at the site of modification and processing.

The colicin A lysis protein (Cal) is required for the release of colicin A to the medium by producing bacteria. This protein is produced in a precursor form that contains a cysteine at the cleavage site (-Leu-Ala-Ala-Cys). The precursor must be modified by the addition of lipid before it can be processed. The maturation is prevented by globomycin, an inhibitor of signal peptidase II. Using oligonucleotide-directed mutagenesis, the alanine and cystein residues in the -1 and +1 positions of the cleavage site were replaced by proline and threonine residues, respectively, in two different constructs. Both substitutions prevented the normal modification and cleavage of the protein. The marked activation of the outer membrane detergent-resistant phospholipase A observed with wild-type Cal was not observed with the Cal mutants. Both Cal mutants were also defective for the secretion of colicin A. In one mutant, the signal peptide appeared to be cleaved off by an alternative pathway involving signal peptidase I. Electron microscope studies with immunogold labeling of colicin A on cryosections of pldA and cal mutant cells indicated that the colicin remains in the cytoplasm and is not transferred to the periplasmic space. These results demonstrate that Cal must be modified and processed to activate the detergent-resistant phospholipase A and to promote release of colicin A.     

An automated assay for phosphorylase kinase

A fully automated assay of phosphorylase kinase capable of processing 40 samples/hr is described. Problems due to enzyme adsorbed to the incubation coil and thereby producing a continuous rise of the base line were overcome by washing with a solution containing 0.05% Triton X-100, 0.03% SDS, and 5 mm EDTA. Under these conditions, a linear relationship between phosphorylase kinase concentration in the incubation mixture and absorbancy at pH's 6.8 and 8.2 is obtained when 1% glycogen is present in the reaction mixture.Inclusion of glycogen allows reduction of the concentration of phosphorylase in the incubation mixture. Due to the presence of Triton X-100 in this test, the carbohydrate acts like an allosteric activator of phosphorylase kinase. The standard deviation of the automated kinase test is 1.3% lower than that of the manual test.