Production of yeast chitin–glucan complex from biodiesel industry byproduct

Crude glycerol from the biodiesel industry was used as carbon source for high cell density fed-batch cultivation of Pichia pastoris aiming at producing a chitin–glucan complex (CGC). More than 100 g L^?1 biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g g^?1 during the batch phase and 0.63 g g^?1 during the fed-batch phase. The chitin–glucan complex was recovered from the yeast cell wall by hot alkaline extraction. CGC content in the cell wall was found to be relatively constant throughout the cultivation (18–26%) with a volumetric productivity of 1.28 g L^?1 h^?1 at the end of the fed-batch phase. The molar ratio of chitin:β-glucan in the extracted biopolymer was 16:84, close to other CGC extracted from Aspergillus biomass. The extracted polymer was characterized by Differential Scanning Calorimetry (DCS) and solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and compared with commercial biopolymers, namely, crab shell chitin and/or chitosan, algal β-glucan (laminarin) and fungal chitin–glucan complex (kiOsmetine).     

Challenges in enzymatic hydrolysis and fermentation of pretreated Arundo donax revealed by a comparison between SHF and SSF

The perennial herbaceous crop Arundo donax is a potential feedstock for second-generation bioethanol production. In the present work, two different process options were investigated for the conversion of two differently steam-pretreated batches of A. donax. The pretreated raw material was converted to ethanol with a xylose-consuming Saccharomyces cerevisiae strain, VTT C-10880, by applying either separate hydrolysis and fermentation (SHF) or simultaneous saccharification and fermentation (SSF). The highest overall ethanol yield and final ethanol concentration were achieved using SHF (0.27 g g^?1 and 20.6 g L^?1 compared to 0.24 g g^?1 and 19.0 g L^?1 when SSF was used). The performance of both SHF and SSF was improved by complementing the cellulolytic enzymes with hemicellulases. The higher amount of acetic acid in one of the batches was shown to strongly affect xylose consumption in the fermentation. Only half of the xylose was consumed when batch 1 (high acetic acid) was fermented, compared to that 94% of the xylose was consumed in fermentation of batch 2 (lower acetic acid). Furthermore, the high amount of xylooligomers present in the pretreated materials considerably inhibited the enzymatic hydrolysis. Both the formation of xylooligomers and acetic acid thus need to be considered in the pretreatment process in order to achieve efficient conversion of A. donax to ethanol.     

Poly(3-hydroxybutyrate) production by Cupriavidus necator using waste glycerol

Polyhydroxyalkanoates (PHAs) have been recognized as good substitutes for the non-biodegradable petrochemically produced polymers. However, their high (real or estimated) current production cost limits their industrial applications. This work exploits two strategies to enhance PHAs substitution potential: the increase in PHA volumetric productivity in high density cultures and the use of waste glycerol (GRP), a by-product from the biodiesel industry, as primary carbon source for cell growth and polymer synthesis. Cupriavidus necator DSM 545 was used to accumulate poly(3-hydroxybutyrate) (P(3HB)) from GRP and from commercial glycerol (PG) as control substrate. On PG, productivities between 0.6 g_PHB L^?1 h^?1 and 1.5 g_PHB L^?1 h^?1 were attained. The maximum cell DW was 82.5 g_DW L^?1, the P(3HB) content being 62%. When GRP was used, 68.8 g_DW L^?1 with a P(3HB) accumulation of 38% resulting in a final productivity of 0.84 g_PHB L^?1 h^?1 was obtained. By decreasing the biomass concentration at which accumulation was triggered, a productivity of 1.1 g_PHB L^?1 h^?1 (50% P(3HB), w/w) was attained using GRP. P(3HB) molecular weights (M_w) ranged from 7.9 × 10⁵ to 9.6 × 10⁵ Da.     

Inulinase production by the marine yeast Cryptococcus aureus G7a and inulin hydrolysis by the crude inulinase

The marine yeast strain G7a isolated from sediment of China South Sea was found to secrete a large amount of inulinase into the medium. This marine yeast strain was identified to be a strain of Cryptococcus aureus according to the results of routine yeast identification and molecular methods. The crude inulinase produced by this marine yeast showed the highest activity at pH 5.0 and 50 °C. The optimal medium for inulinase production was artificial seawater containing inulin 4.0% (w/v), K₂HPO₄ 0.3% (w/v), yeast extract 0.5% (w/v), KCl 0.5% (w/v), CaCl₂ 0.12% (w/v), NaCl 4.0% (w/v) and MgCl₂·6H₂O 0.6% (w/v), while the optimal cultivation conditions for inulinase production were pH 5.0, a temperature of 28 °C and a shaking speed of 170 rpm. Under the optimal conditions, over 85.0 U/ml of inulinase activity was produced within 42 h of fermentation at shake flask level. This is very high level of inulinase activity produced by yeasts. A large amount of monosaccharides and oligosaccharides were detected after inulin hydrolysis by the crude inulinase.     

Metabolic engineering of Saccharomyces cerevisiae for the biotechnological production of succinic acid

The production of bio-based succinic acid is receiving great attention, and several predominantly prokaryotic organisms have been evaluated for this purpose. In this study we report on the suitability of the highly acid- and osmotolerant yeast Saccharomyces cerevisiae as a succinic acid production host. We implemented a metabolic engineering strategy for the oxidative production of succinic acid in yeast by deletion of the genes SDH1, SDH2, IDH1 and IDP1. The engineered strains harbor a TCA cycle that is completely interrupted after the intermediates isocitrate and succinate. The strains show no serious growth constraints on glucose. In glucose-grown shake flask cultures, the quadruple deletion strain Δsdh1Δsdh2Δidh1Δidp1 produces succinic acid at a titer of 3.62 g L^?1 (factor 4.8 compared to wild-type) at a yield of 0.11 mol (mol glucose)^?1. Succinic acid is not accumulated intracellularly. This makes the yeast S. cerevisiae a suitable and promising candidate for the biotechnological production of succinic acid on an industrial scale.     

Continuous production of selenomethionine-enriched Chlorella sorokiniana biomass in a photobioreactor

This article describes the enrichment of the fresh-water green microalga Chlorella sorokiniana in selenomethionine (SeMet). The microalga was cultivated in a 2.2 L glass-vessel photobioreactor, in a culture medium supplemented with selenate (SeO₄^2?) concentrations ranging from 5 to 50 mg L^?1. Although selenate exposure lowered culture viability, C. sorokiniana grew well at all tested selenate concentrations, however cultures supplemented with 50 mg L^?1 selenate did not remain stable at steady state. A suitable selenate concentration in fresh culture medium for continuous operation was determined, which allowed stable long-term cultivation at steady state and maximal SeMet productivity. In order to do that, the effect of dilution rate on biomass productivity, viability and SeMet content of C. sorokiniana at several selenate concentrations were determined in the photobioreactor. A maximal SeMet productivity of 21 μg L^?1 day^?1 was obtained with 40 mg L^?1 selenate in the culture medium. Then a continuous cultivation process at several dilution rates was performed at 40 mg L^?1 selenate obtaining a maximum of 246 μg L^?1 day^?1 SeMet at a low dilution rate of 0.49 day^?1, calculated on total daily effluent volume. This paper describes for the first time an efficient long-term continuous cultivation of C. sorokiniana for the production of biomass enriched in the high value amino acid SeMet, at laboratory scale.     

Inulinase overproduction by a mutant of the marine yeast Pichia guilliermondii using surface response methodology and inulin hydrolysis

In this study, in order to isolate inulinase overproducers from the marine yeast Pichia guilliermondii, its cells were treated by using UV light and LiCl. The mutant M-30 with enhanced inulinase production was obtained and was found to be stable after cultivation for 20 generations. Response surface methodology (RSM) was used to optimize the medium compositions and cultivation conditions for inulinase production by the mutant M-30 in liquid fermentation. Inulin, yeast extract, NaCl, temperature, pH for maximum inulinase production by the mutant M-30 were found to be 20.0 g/l, 5.0 g/l, 20.0 g/l, 28 °C and 6.5, respectively. Under the optimized conditions, 127.7 U/ml of inulinase activity was reached in the liquid culture of the mutant M-30 whereas the predicted maximum inulinase activity of 129.8 U/ml was derived from RSM regression. Under the same conditions, its parent strain only produced 48.1 U/ml of inulinase activity. This is the highest inulinase activity produced by the yeast strains reported so far. We also found that inulin could be actively converted into monosaccharides by the crude inulinase.     

d- and l-lactic acid production from fresh sweet potato through simultaneous saccharification and fermentation

The aim of this study was to develop a bioprocess for l- and d-lactic acid production from raw sweet potato through simultaneous saccharification and fermentation by Lactobacillus paracasei and Lactobacillus coryniformis, respectively. The effects of enzyme and nitrogen source concentrations as well as of the ratio of raw material to medium were investigated. At dried material concentrations of 136.36–219.51 g L⁻¹, yields of 90.13–91.17% (w/w) and productivities of 3.41–3.83 g L⁻¹ h⁻¹ were obtained with lactic acid concentrations as high as 198.32 g L⁻¹ for l-lactic acid production. In addition, d-lactic acid was produced with yields of 90.11–84.92% (w/w) and productivities of 2.55–3.11 g L⁻¹ h⁻¹ with a maximum concentration of 186.40 g L⁻¹ at the same concentrations of dried material. The simple and efficient process described in this study will benefit the tuber and root-based lactic acid industries without requiring alterations in plant equipment.     

Improvement of (R)-carbonyl reductase-mediated biosynthesis of (R)-1-phenyl-1,2-ethanediol by a novel dual-cosubstrate-coupled system for NADH recycling

An NAD(H)-dependent (R)-carbonyl reductase (RCR) from Candida parapsilosis catalyzes the asymmetric reduction of 2-hydroxyacetophenone (2-HAP) to (R)-1-phenyl-1,2-ethanediol ((R)-PED), which is a valuable chiral building block in the pharmaceutical and fine chemical industries. Biosynthesis efficiency of (R)-PED was considerably improved by a novel dual-cosubstrate-coupled system. By simultaneously employing isopropanol (10%, v v^?1) and glycerol (8%, v v^?1) as sacrificial cosubstrates, the (R)-PED product had an excellent optical purity of >99.9% and a conversion of 85.5%, which were nearly 2- and 11-fold higher than those without adding cosubstrate, respectively. Besides, the productivity was dramatically enhanced from 0.02 g L^?1 h^?1 to 5 g L^?1 h^?1, and the maximum acceptable concentration of 2-HAP was elevated to 10 g L^?1. Isopropanol was directly oxidized by RCR in the formation of NADH, while glycerol was metabolized by cellular enzymes to release NADH. Moreover, glycerol prevented cells from losing viability and alleviated the toxicity of isopropanol and acetone for cells. Interestingly, there was a cooperative interaction between isopropanol and glycerol for the improvement of biosynthesis efficiency of (R)-PED.     

Improvement in natamycin production by Streptomyces natalensis with the addition of short-chain carboxylic acids

Natamycin is an important tetraene (polyene) antibiotic produced in submerged culture by different strains of Streptomyces sp. In the present work, the effects of the addition of short-chain carboxylic acids (acetic, propionic and butyric) on cell growth and the kinetics of natamycin production were investigated during submerged cultivation of Streptomyces natalensis. The addition of acetic and propionic acids showed stimulatory effects on natamycin production when added to the fermentation medium at concentrations below 2 g L^?1 at the beginning of cultivation. In addition, when acetic and propionic acids were added in a mixture (7:1) at a total concentration of 2 g L^?1, antibiotic production increased significantly, reaching 3.0 g L^?1 (approximately 223% and 250% increases in volumetric and specific antibiotic production, respectively, compared with the control culture). Moreover, the addition of carboxylic acids not only increased the antibiotic yield but also decreased the production time from 96 h to only 84 h in shake-flask cultures. A further enhancement in natamycin production was achieved by cultivation in a 2-L stirred-tank bioreactor under controlled pH conditions. The maximum volumetric production of 3.98 g L^?1 was achieved after 84 h in carboxylic acid-supplemented culture (acetate and propionate in a ratio of 7:1).     

Continuous succinic acid production by Actinobacillus succinogenes in a biofilm reactor: Steady-state metabolic flux variation

Continuous anaerobic fermentations were performed in a novel external-recycle, biofilm reactor using d-glucose and CO₂ as carbon substrates. Succinic acid (SA) yields were found to be an increasing function of glucose consumption with the succinic acid to acetic acid ratio increasing from 2.4 g g⁻¹ at a glucose consumption of 10 g L⁻¹, to 5.7 g g⁻¹ at a glucose consumption of 50 g L⁻¹. The formic acid to acetic acid ratio decreased from an equimolar value (0.77 g g⁻¹) at a glucose consumption of 10 g L⁻¹ to a value close to zero at 50 g L⁻¹. The highest SA yield on glucose and highest SA titre obtained were 0.91 g g⁻¹ and 48.5 g L⁻¹ respectively. Metabolic flux analysis based on the established C₃ and C₄ metabolic pathways of Actinobacillus succinogenes revealed that the increase in the succinate to acetate ratio could not be attributed to the decrease in formic acid and that an additional source of NADH was present. The fraction of unaccounted NADH increased with glucose consumption, suggesting that additional reducing power is present in the medium or is provided by the activation of an alternative metabolic pathway.     

Fermentative production of succinic acid from straw hydrolysate by Actinobacillus succinogenes

In this work, straw hydrolysates were used to produce succinic acid by Actinobacillus succinogenes CGMCC1593 for the first time. Results indicated that both glucose and xylose in the straw hydrolysates were utilized in succinic acid production, and the hydrolysates of corn straw was better than that of rice or wheat straw in anaerobic fermentation of succinic acid. However, cell growth and succinic acid production were inhibited when the initial concentration of sugar, which was from corn straw hydrolysate (CSH), was higher than 60 g l^?1. In batch fermentation, 45.5 g l^?1 succinic acid concentration and 80.7% yield were attained after 48 h incubation with 58 g l^?1 of initial sugar from corn straw hydrolysate in a 5-l stirred bioreactor. While in fed-batch fermentation, concentration of succinic acid achieved 53.2 g l^?1 at a rate of 1.21 g l^?1 h^?1 after 44 h of fermentation. Our work suggested that corn straw could be utilized for the economical production of succinic acid by A. succinogenes.     

Biological and molecular responses of Chironomus riparius (Diptera,Chironomidae) to herbicide 2,4-D (2,4-dichlorophenoxyacetic acid)

2,4-Dichlorophenoxyacetic acid (2,4-D) is an agricultural contaminant found in rural ground water. It remains to be determined whether neither 2,4-D poses environmental risks, nor is the mechanism of toxicity known at the molecular level. To evaluate the potential ecological risk of 2,4-D, we assessed the biological parameters including the survival rate, adult sex ratio of emerged adults, and mouthpart deformities in Chironomus riparius after long-term exposure to 2,4-D. The larvae were treated with 0.1, 1 or, 10 μg L^? 1 of 2,4-D for short- and long-term exposure periods. The sex ratio was changed in C. riparius exposed to only 10 μg L^? 1 of 2,4-D, whereas mouthpart deformities were observed as significantly higher in C. riparius exposed to 0.1 μg L^? 1 of 2,4-D. Survival rates were not significantly affected by 2,4-D. Furthermore, we evaluated the molecular and biochemical responses of biomarker genes such as gene expression of heat shock proteins (HSPs), ferritins and glutathione S-transferases (GSTs) in C. riparius exposed to 2,4-D for 24 h. The expressions of HSP70, HSP40, HSP90 and GST levels in C. riparius were significantly increased after exposure to a 10 μg L^? 1 concentration of 2,4-D, whereas ferritin heavy and light chain gene expressions were significantly increased at all concentrations of 2,4-D exposure. Finally, these results may provide an important contribution to our understanding of the toxicology of 2,4-D herbicide in C. riparius. Moreover, the 2,4-D-mediated gene expressions may be generated by 2,4-D is the causative effects on most probable cause of the observed alterations. These biological, molecular and morphological parameters and the measured parameters can be used to monitor 2,4-D toxicity in an aquatic environment.     

Enantioselective oxidation of racemic lactic acid to d-lactic acid and pyruvic acid by Pseudomonas stutzeri SDM

d-Lactic acid and pyruvic acid are two important building block intermediates. Production of d-lactic acid and pyruvic acid from racemic lactic acid by biotransformation is economically interesting. Biocatalyst prepared from 9 g dry cell wt l^?1 of Pseudomonas stutzeri SDM could catalyze 45.00 g l^?1 dl-lactic acid into 25.23 g l^?1 d-lactic acid and 19.70 g l^?1 pyruvic acid in 10 h. Using a simple ion exchange process, d-lactic acid and pyruvic acid were effectively separated from the biotransformation system. Co-production of d-lactic acid and pyruvic acid by enantioselective oxidation of racemic lactic acid is technically feasible.     

New integrated bioprocess for the continuous production,extraction and purification of lipopeptides produced by Bacillus subtilis in membrane bioreactor

Recently, a bubbleless membrane bioreactor (BMBR) has been successfully developed for biosurfactant production by Bacillus subtilis [1]. In this study, for the first time, continuous culture were carried out for the production of surfactin in a BMBR, both with or without a coupled microfiltration membrane. Results from continuous culture showed that a significant part of biomass was immobilized onto the air/liquid membrane contactor. Immobilized biomass activity onto the air/liquid membrane contactor was monitored using a respirometric analysis. Kinetics of growth, surfactin and primary metabolites production were investigated. Planktonic biomass, immobilized biomass and surfactin production and productivity obtained in batch culture (3 L) of 1.5 days of culture were 4.5 g DW, 1.3 g DW, 1.8 g and 17.4 mg L^?1 h^?1, respectively. In continuous culture without total cell recycling (TCR), the planktonic biomass was leached, but immobilized biomass reached a steady state at an estimated 6.6 g DW. 11.5 g of surfactin was produced after 3 days of culture, this gave an average surfactin productivity of 54.7 mg L^?1 h^?1 for the continuous culture, which presented a surfactin productivity of 30 mg L^?1 h^?1 at the steady state. TCR was then investigated for the continuous production, extraction and purification of surfactin using a coupled ultrafiltration step. In continuous culture with TCR at a dilution rate of 0.1 h^?1, planktonic biomass, immobilized biomass, surfactin production and productivity reached 7.5 g DW, 5.5 g DW, 7.1 g and 41.6 mg L^?1 h^?1 respectively, after 2 days of culture. After this time, biomass and surfactin productions stopped. Increasing dilution rate to 0.2 h^?1 led to the resumption of biomass and surfactin production and these values reached 11.1 g DW, 10.5 g DW, 7.9 g and 110.1 mg L^?1 h^?1, respectively, after 3 days of culture. This study has therefore shown that with this new integrated bioprocess, it was possible to continuously extract and purify several grams of biosurfactant, with purity up to 95%.     

Serum selenium levels of the very low birth weight premature newborn infants with bronchopulmonary dysplasia

BackgroundThe selenium (Se) is an essential trace element that has a critical role in synthesis and activity of a number of selenoproteins with protective properties against free radical damage. This study was conducted to detect the serum Se concentration in very low birth weight (VLBW) preterm infants and its association with bronchopulmonary dysplasia (BPD).Materials and methodsCord blood Se concentration was determined in 54 neonates with gestation age 30 week or less. Another sample was obtained from these infants at day 28 of birth and serum Se levels were measured by atomic absorption spectrophotometer. All neonates were followed for oxygen dependency at 28 day after birth and 36 week postmenstrual age.ResultsThe mean cord blood Se concentration in studied neonates was 64.78 ± 20.73 μg L^?1. Serum Se concentration was 60.33 ± 26.62 μg L^?1 at age 28-day. No significant correlation was observed for serum Se concentration at birth and at one month after birth (r = ?0.04, p = 0.72). BPD was diagnosed in 25 neonates (46%). The mean serum Se concentration at one month was 57.16 ± 29.68 μg L^?1 in patients with BPD (25 cases) and 63.27 ± 23.6 μg L^?1 in 29 patients without BPD (p = 0.40).ConclusionIn our study, serum Se concentration at 28 day of birth was lower than cord blood levels in preterm neonates, but we have not found significant difference among patients who had BPD or not with respect to serum Se concentrations at this age.     

Improving the lactic acid production of Actinobacillus succinogenes by using a novel fermentation and separation integration system

This work describes the development of a novel integrated system for lactic acid production by Actinobacillus succinogenes. Fermentation and separation were integrated with the use of a microfiltration (MF) membrane, and lactic acid was recovered by resin adsorption following MF. The fermentation broth containing residual sugar and nutrients was then recycled back into the fermenter after lactic acid adsorption. This novel approach overcame the problem of product inhibition and extended the cell growth period from 41 h to 120 h. Production of lactic acid was improved by 23% to 183.4 g L⁻¹. The overall yield and productivity for glucose were 0.97 g g⁻¹ and 1.53 g L⁻¹ h⁻¹, respectively. These experimental results indicate that the integrated system could benefit continuous production of lactic acid at high levels.     

Catalytic removal of sulfide by an immobilized sulfide-oxidase bioreactor

A bioreactor packed with chitosan immobilized sulfide-oxidase from Streptomyces species LD048 was developed to treat a liquid stream of sulfide. The inoculation system was composed of glass with a 0.7 L working volume and enzyme activity of 2 mmol S g^?1 carrier. The sulfide removal efficiency was almost 100% when the volumetric loading was increased up to 3.9 mmol S L^?1 h^?1 at a space velocity of 18 h^?1. The maximal elimination capacity was 22.1 mmol S L^?1 h^?1 with a space velocity of 72 h^?1. When the aeration was increased from 0.05 to 0.1 L min^?1, the average removal efficiency improved from 81% to 94%. A removal efficiency of 90% was obtained after 15 days of operation with a load rate of 8.9 mmol S L^?1 h^?1 and a space velocity of 14.28 h^?1. An operational equation based on the ideal plug flow bioreactor and the Michaelis–Menten model predicted the performance of this bioreactor.     

Bench-scale fermentation of Trichoderma viride on wastewater sludge: Rheology,lytic enzymes and biocontrol activity

Conidiation and lytic enzyme production by Trichoderma viride at different solids concentration of pre-treated municipal wastewater sludge was examined in a 15-L fermenter. The maximum conidia concentration (5.94 × 10⁷ CFU mL⁻¹ at 96 h) was obtained at 30 g L⁻¹ suspended solids. The maximum lytic enzyme activities were achieved around 12–30 h of fermentation. Bioassay against a fungal phytopathogen, Fusarium sp. showed maximum activity in the sample drawn around 96 h of fermentation at 30 g L⁻¹ suspended solids concentration. Entomotoxicity against spruce budworm larvae showed maximum value ≈17290 SBU μL⁻¹ at 30 g L⁻¹ suspended solids concentration at the end of fermentation (96 h). Plant bioassay showed dual action of T. viride, i.e., disease prevention and growth promotion. The rheological analyses of fermentation sludges showed the pseudoplastic behaviour. In order to maintain required dissolved oxygen concentration ≥30%, the agitation and aeration requirements significantly increased at 35 g L⁻¹ compared to 30 and 25 g L⁻¹. The oxygen uptake rate and volumetric oxygen mass transfer coefficient, k_La at 35 g L⁻¹ did not increase in comparison to 30 g L⁻¹ due to rheological complexity of the broth during fermentation. Thus, the successful fermentation operation of the biocontrol fungus T. viride is a rational indication of its potential for mass-scale production for agriculture and forest sector as a biocontrol agent.     

Poly-β-hydroxybutyrate/ectoine co-production by ectoine-excreting strain Halomonas salina

The ectoine-excreting bacterial strain of Halomonas salina was employed in the co-production of poly-β-hydroxybutyrate (PHB) and ectoine (Ect) during a fermentation process (PHB/Ect co-production). An efficient PHB/Ect co-production process was carried out at low NaCl concentration (30 g L⁻¹). It was established using ¹H Nuclear Magnetic Resonance spectroscopy that H. salina produces PHB. The effects of the NaCl concentration, the initial C/N ratio, the phosphate concentration and mixed carbon sources were investigated with respect to PHB/Ect co-production. The PHB/Ect co-production system comprised growing and non-growing cell phases and was developed with NaCl concentration of 30 g L⁻¹. The optimal conditions for PHB/Ect co-production by the ectoine-excreting strain of H. salina were 30 g L⁻¹ NaCl, with an initial C/N ratio of 15, an initial phosphate concentration of 12 g L⁻¹ and mixed carbon sources of 55 g L⁻¹ glucose and 25 g L⁻¹ monosodium glutamate. Using a PHB/Ect co-production system with growing and non-growing cell phases prevents the inhibition of PHB synthesis by high concentration of NaCl and significantly reduces ectoine degradation. PHB and ectoine concentrations as high as 35.3 g L⁻¹ and 8.6 g L⁻¹, respectively, were achieved. The efficient co-production of PHB and ectoine at a low NaCl concentration has been realised.