Dinitrosyl iron complexes with thiolate ligands: Physico-chemistry,biochemistry and physiology

Some present-day concepts on the origin and functional activities of dinitrosyl iron complexes (DNIC) with thiolate ligands are considered. Nitric oxide (NO) including to DNIC increases its stability and ensures effective targeting of NO to organs and tissues. DNIC have a square–planar structure; unpaired electron is localized on the d_z2 orbital of the d⁷ iron atom. The formula of DNIC appears as {(RS^?)₂Fe⁺(NO⁺)₂….(^?SR)₂}^?; electron spin is S = 1/2. Conversion of an originally diamagnetic group, Fe²⁺(NO)₂ with electron configuration d⁸, into a paramagnetic Fe⁺(NO⁺)₂ group is a result of disproportionation of NO ligands and substitution of newly generated NO^? for NO. The nitrosonium ions present in DNIC impart to them high nitrosylating activity, e.g., ability to induce S-nitrosylation of thiols. The ability of S-nitrosothiols to form DNIC in a direct reaction with bivalent iron is a prerequisite to effective mutual conversions of DNIC and S-nitrosothiols. In this work, I consider some mechanisms of destructive effects of low-molecular DNIC on active centers of iron–sulfur proteins, ability of DNIC to express certain genes, to activate guanylate cyclase, to exert hypotensive, vasodilator effects, to inhibit platelet aggregation, to accelerate wound healing and to produce potent erective action. Recently a stabilized powder-like polymeric composition based on dimeric glutathione DNIC the water-soluble polymer in which was used as a filling agent was designed. The advantages of this stable DNIC-glutathione preparation include their ability to retain their physico-chemical and functional activities within at least one year. At present, the preparation undergo testing as a base for the design of a wide variety of broad-spectrum drugs.     

The effects of NH4+ and NO3− on growth,resource allocation and nitrogen uptake kinetics of Phragmites australis and Glyceria maxima

The effects of NH₄⁺ or NO₃⁻ on growth, resource allocation and nitrogen (N) uptake kinetics of two common helophytes Phragmites australis (Cav.) Trin. ex Steudel and Glyceria maxima (Hartm.) Holmb. were studied in semi steady-state hydroponic cultures. At a steady-state nitrogen availability of 34 μM the growth rate of Phragmites was not affected by the N form (mean RGR = 35.4 mg g⁻¹ d⁻¹), whereas the growth rate of Glyceria was 16% higher in NH₄⁺-N cultures than in NO₃⁻-N cultures (mean = 66.7 and 57.4 mg g⁻¹ d⁻¹ of NH₄⁺ and NO₃⁻ treated plants, respectively). Phragmites and Glyceria had higher S/R ratio in NH₄⁺ cultures than in NO₃⁻ cultures, 123.5 and 129.7%, respectively.Species differed in the nitrogen utilisation. In Glyceria, the relative tissue N content was higher than in Phragmites and was increased in NH₄⁺ treated plants by 16%. The tissue NH₄⁺ concentration (mean = 1.6 μmol g fresh wt⁻¹) was not affected by N treatment, whereas NO₃⁻ contents were higher in NO₃⁻ (mean = 1.5 μmol g fresh wt⁻¹) than in NH₄⁺ (mean = 0.4 μmol g fresh wt⁻¹) treated plants. In Phragmites, NH₄⁺ (mean = 1.6 μmol g fresh wt⁻¹) and NO₃⁻ (mean = 0.2 μmol g fresh wt⁻¹) contents were not affected by the N regime. Species did not differ in NH₄⁺ (mean = 56.5 μmol g⁻¹ root dry wt h⁻¹) and NO₃⁻ (mean = 34.5 μmol g⁻¹ root dry wt h⁻¹) maximum uptake rates (V_max), and V_max for NH₄⁺ uptake was not affected by N treatment. The uptake rate of NO₃⁻ was low in NH₄⁺ treated plants, and an induction phase for NO₃⁻ was observed in NH₄⁺ treated Phragmites but not in Glyceria. Phragmites had low K_m (mean = 4.5 μM) and high affinity (10.3 l g⁻¹ root dry wt h⁻¹) for both ions compared to Glyceria (K_m = 6.3 μM, affinity = 8.0 l g⁻¹ root dry wt h⁻¹). The results showed different plasticity of Phragmites and Glyceria toward N source. The positive response to NH₄⁺-N source may participates in the observed success of Glyceria at NH₄⁺ rich sites, although other factors have to be considered. Higher plasticity of Phragmites toward low nutrient availability may favour this species at oligotrophic sites.     

Autowave distribution of nitric oxide and its endogenous derivatives in biosystems strongly enhances their biological effects: A working hypothesis

It is hypothesized that in cells producing nitric oxide (NO), NO and its endogenous derivatives (low-molecular S-nitrosothiols and dinitrosyl iron complexes (DNIC) with thiol-containing ligands) can move in the intracellular space not only by diffusion but also in an autowave mode. This hypothesis is based on the previously obtained data on autowave distribution of DNIC with glutathione following application of a drop of a solution of Fe²⁺ + glutathione onto the surface of a thin layer of a S-nitrosoglutathione solution. The appearance of autowaves is conditioned by a self-regulating self-sustained system arising in the process. This system consists of self-convertible DNIC and S-nitrosothiols as well as free ferrous iron ions, thiols and NO and can function in the autowave regime for several seconds with subsequent passage to a steady state maintained by chemical equilibrium between DNIC and their constituent components (free Fe²⁺ ions, thiols, S-nitrosothiols and NO). Possible advantages of autowave distribution of NO and its endogenous derivatives in the intracellular space over free diffusion, which might entail higher efficiency of their biological action, are discussed.     

Enzymatic hydrolysis of corncob and ethanol production from cellulosic hydrolysate

 Enzymatic hydrolysis of corncob and ethanol fermentation from cellulosic hydrolysate were investigated. After corncob was pretreated by 1% H₂SO₄ at 108 °C for 3 h, the cellulosic residue was hydrolyzed by cellulase from Trichoderma reesei ZU-02 and the hydrolysis yield was 67.5%. Poor cellobiase activity in T. reesei cellulase restricted the conversion of cellobiose to glucose, and the accumulation of cellobiose caused severe feedback inhibition to the activities of β-1,4-endoglucanase and β-1,4-exoglucanase in cellulase system. Supplementing cellobiase from Aspergillus niger ZU-07 greatly reduced the inhibitory effect caused by cellobiose, and the hydrolysis yield was improved to 83.9% with enhanced cellobiase activity of 6.5 CBU g⁻¹ substrate. Fed-batch hydrolysis process was started with a batch hydrolysis containing 100 g l⁻¹ substrate, with cellulosic residue added at 6 and 12 h twice to get a final substrate concentration of 200 g l⁻¹. After 60 h of reaction, the reducing sugar concentration reached 116.3 g l⁻¹ with a hydrolysis yield of 79.5%. Further fermentation of cellulosic hydrolysate containing 95.3 g l⁻¹ glucose was performed using Saccharomyces cerevisiae 316, and 45.7 g l⁻¹ ethanol was obtained within 18 h. The research results are meaningful in fuel ethanol production from agricultural residue instead of grain starch.     

Continuous succinic acid production by Actinobacillus succinogenes in a biofilm reactor: Steady-state metabolic flux variation

Continuous anaerobic fermentations were performed in a novel external-recycle, biofilm reactor using d-glucose and CO₂ as carbon substrates. Succinic acid (SA) yields were found to be an increasing function of glucose consumption with the succinic acid to acetic acid ratio increasing from 2.4 g g⁻¹ at a glucose consumption of 10 g L⁻¹, to 5.7 g g⁻¹ at a glucose consumption of 50 g L⁻¹. The formic acid to acetic acid ratio decreased from an equimolar value (0.77 g g⁻¹) at a glucose consumption of 10 g L⁻¹ to a value close to zero at 50 g L⁻¹. The highest SA yield on glucose and highest SA titre obtained were 0.91 g g⁻¹ and 48.5 g L⁻¹ respectively. Metabolic flux analysis based on the established C₃ and C₄ metabolic pathways of Actinobacillus succinogenes revealed that the increase in the succinate to acetate ratio could not be attributed to the decrease in formic acid and that an additional source of NADH was present. The fraction of unaccounted NADH increased with glucose consumption, suggesting that additional reducing power is present in the medium or is provided by the activation of an alternative metabolic pathway.     

Poly(3-hydroxybutyrate) production by Cupriavidus necator using waste glycerol

Polyhydroxyalkanoates (PHAs) have been recognized as good substitutes for the non-biodegradable petrochemically produced polymers. However, their high (real or estimated) current production cost limits their industrial applications. This work exploits two strategies to enhance PHAs substitution potential: the increase in PHA volumetric productivity in high density cultures and the use of waste glycerol (GRP), a by-product from the biodiesel industry, as primary carbon source for cell growth and polymer synthesis. Cupriavidus necator DSM 545 was used to accumulate poly(3-hydroxybutyrate) (P(3HB)) from GRP and from commercial glycerol (PG) as control substrate. On PG, productivities between 0.6 g_PHB L^?1 h^?1 and 1.5 g_PHB L^?1 h^?1 were attained. The maximum cell DW was 82.5 g_DW L^?1, the P(3HB) content being 62%. When GRP was used, 68.8 g_DW L^?1 with a P(3HB) accumulation of 38% resulting in a final productivity of 0.84 g_PHB L^?1 h^?1 was obtained. By decreasing the biomass concentration at which accumulation was triggered, a productivity of 1.1 g_PHB L^?1 h^?1 (50% P(3HB), w/w) was attained using GRP. P(3HB) molecular weights (M_w) ranged from 7.9 × 10⁵ to 9.6 × 10⁵ Da.     

Parietin in the tolerant lichen Xanthoria parietina (L.) Th. Fr. increases protection of Trebouxia photobionts from cadmium excess

Secondary metabolites of lichens can be involved in production of chelates with heavy metals. We hypothesized that parietin plays important role in protection of photobiont cells in Xanthoria parietina from an excess of cadmium ions. Two types of X. parietina lichen thalli, natural with presence of secondary metabolite parietin (p+) as well as without parietin (p−) were exposed to different doses of cadmium (up to 300 μmol g⁻¹ dw). Based on determination of the total and intracellular Cd-accumulation, ergosterol and thiobarbituric acid reactive substances (TBARS) content did not show statistically significant differences in the response of both types of thalli (p+ and p−). However, a stronger toxic effect of the highest Cd-dose on photosynthetic pigment content and chlorophyll a fluorescence was observed in the parietin-depleted thalli. The protective role of parietin against Cd excess was better supported and concluded from the differences observed in the production of non-protein thiol compounds (cysteine, glutathione and phytochelatins) involved in Cd detoxification. In the p+ thalli Cys content was stable but GSH content slightly decreased in the studied Cd range, while in the p− thalli these compounds were completely absent at high Cd doses. At Cd doses higher than 37.5 μmol Cd g⁻¹ dw, toxic to both types of X. parietina thalli, Cys and GSH contents were significantly higher in p+ than in p− thalli. Also, the photobiont partner in the p+ thalli was better protected of the metal exposition, and able to produce phytochelatins (PCs) over the whole range of metal, while in the p− thalli the production was completely inhibited at 75 μmol Cd g⁻¹ dw and higher concentrations, together with the inhibition of cysteine (Cys) and reduced glutathione (GSH) production. The obtained results indicate that the parietin layer is a natural barrier decreasing Cd access to algal cells in X. parietina. Comparison of PCs production appeared to be the most sensitive marker for estimation of Cd availability to photobiont in the symbiotic system.     

Structural changes that occur upon photolysis of the Fe(II)a3–CO complex in the cytochrome ba3-oxidase of Thermus thermophilus: A combined X-ray crystallographic and infrared spectral study demonstrates CO binding to CuB

The purpose of the work was to provide a crystallographic demonstration of the venerable idea that CO photolyzed from ferrous heme-a₃ moves to the nearby cuprous ion in the cytochrome c oxidases. Crystal structures of CO-bound cytochrome ba₃-oxidase from Thermus thermophilus, determined at ~ 2.8–3.2 Å resolution, reveal a Fe–C distance of ~ 2.0 Å, a Cu–O distance of 2.4 Å and a Fe–C–O angle of ~ 126°. Upon photodissociation at 100 K, X-ray structures indicate loss of Fe_a3–CO and appearance of Cu_B–CO having a Cu–C distance of ~ 1.9 Å and an O–Fe distance of ~ 2.3 Å. Absolute FTIR spectra recorded from single crystals of reduced ba₃–CO that had not been exposed to X-ray radiation, showed several peaks around 1975 cm^? 1; after photolysis at 100 K, the absolute FTIR spectra also showed a significant peak at 2050 cm^? 1. Analysis of the ‘light’ minus ‘dark’ difference spectra showed four very sharp CO stretching bands at 1970 cm^? 1, 1977 cm^? 1, 1981 cm^? 1, and 1985 cm^? 1, previously assigned to the Fe_a3–CO complex, and a significantly broader CO stretching band centered at ~ 2050 cm^? 1, previously assigned to the CO stretching frequency of Cu_B bound CO. As expected for light propagating along the tetragonal axis of the P4₃2₁2 space group, the single crystal spectra exhibit negligible dichroism. Absolute FTIR spectrometry of a CO-laden ba₃ crystal, exposed to an amount of X-ray radiation required to obtain structural data sets before FTIR characterization, showed a significant signal due to photogenerated CO₂ at 2337 cm^? 1 and one from traces of CO at 2133 cm^? 1; while bands associated with CO bound to either Fe_a3 or to Cu_B in “light” minus “dark” FTIR difference spectra shifted and broadened in response to X-ray exposure. In spite of considerable radiation damage to the crystals, both X-ray analysis at 2.8 and 3.2 Å and FTIR spectra support the long-held position that photolysis of Fe_a3–CO in cytochrome c oxidases leads to significant trapping of the CO on the Cu_B atom; Fe_a3 and Cu_B ligation, at the resolutions reported here, are otherwise unaltered. This article is part of a Special Issue entitled: Respiratory Oxidases.     

Protocorm culture of Dendrobium candidum in balloon type bubble bioreactors

Protocorm cultures of Dendrobium candidum were established in balloon type bubble bioreactors using Murashige and Skoog (MS) medium with 0.5 mg l⁻¹ α-naphthaleneacetic acid (NAA), 2.5% (w/v) sucrose, 5:25 mM NH₄:NO₃ and 1% (v/v) banana homogenate for the production of biomass and bioactive compounds. In 3 l bioreactor containing 2 l medium, a maximum protocorm biomass (21.0 g l⁻¹ dry biomass) and also optimum quantities of total polysaccharides (389.3 mg g⁻¹ DW), coumarins (18.0 mg g⁻¹ DW), polyphenolics (11.9 mg g⁻¹ DW), and flavonoids (4.5 mg g⁻¹ DW) were achieved after 7 weeks of culture. Based on these studies, 5 and 10 l bioreactor cultures were established to harvest 80 g and 160 g dry biomass. In 10 l bioreactors, the protocorms grown were accumulated with optimal levels of polysaccharides (424.1 mg g⁻¹ DW), coumarins (15.8 mg g⁻¹ DW), polyphenols (9.03 mg g⁻¹ DW) and flavonoids (4.7 mg g⁻¹ DW). The bioreactor technology developed here will be useful for the production of important bioactive compounds from D. candidum.     

Direct in vivo interaction of the antibiotic primycin with the plasma membrane of Candida albicans: An EPR study

The direct interaction of the antibiotic primycin with the plasma membrane was investigated by employing the well-characterized ergosterol-producing, amphotericin B-sensitive parental Candida albicans strain 33erg⁺ and its ergosterol-less amphotericin B-resistant plasma membrane mutant erg-2. The growth inhibition concentration in shaken liquid medium was 64 μg ml^?1 for 33erg⁺ and 128 μg ml^?1 for erg-2, suggesting that the plasma membrane composition influences the mode of action of primycin. To determine the primycin-induced changes in the plasma membrane dynamic, electron paramagnetic resonance (EPR) spectroscopy methods were used, the spin-labeled fatty acid 5-(4,4-dimethyloxazolidine-N-oxyl)stearic acid) being applied for the in vivo measurements. The phase transition temperatures of untreated strain 33erg⁺ and its mutant erg-2 were 12.5 °C and 11 °C, respectively. After 128 μg ml^?1 primycin treatment, these values increased to 17.5 °C and 16 °C, revealing a significant reduction in the phospholipid flexibility. Saturation transfer EPR measurements demonstrated that, the rotational correlation times of the spin label molecule for the control samples of 33erg⁺ and erg-2 were 60 ns and 100 ns. These correlation times gradually decreased on the addition of increasing primycin concentrations, reaching 8 μs and 1 μs. The results indicate the plasma membrane “rigidizing” effect of primycin, a feature that may stem from its ability to undergo complex formation with membrane constituent fatty acid molecules, causing alterations in the structures of phospholipids in the hydrophobic surface near the fatty acid chain region.     

Inhibition kinetics of a commercial mixed culture by ammonium sulfate

The inhibitory effect of ammonium sulfate on a commercial mixed culture, used in biological waste-water treatment was studied under aerobic batch conditions. Several mathematical models of enzyme and growth kinetics including a death factor were analyzed through nonlinear regression to find the best fit to corresponding data of inhibition. The best fit model was found to be the generalized Monod type with a death factor having the biokinetic parameters; μ_max 0.681 h⁻¹, K_s 0.224 g dm⁻³, K_i 56240 g dm⁻³, K 0.055 g dm⁻³ and k_d 0.052 h⁻¹ to represent the experimental data accurately. The low saturation coefficient value along with high maximum specific growth rate and inhibition coefficient denotes the competitive characteristics of commercial mixed cultures in the biological treatment of high ammonium polluted waste waters.     

Growth of the fungus Paecilomyces lilacinus with n-hexadecane in submerged and solid-state cultures and recovery of hydrophobin proteins

The filamentous fungus Paecilomyces lilacinus was grown on n-hexadecane in submerged (SmC) and solid-state (SSC) cultures. The maximum CO₂ production rate in SmC (V_max = 11.7 mg CO₂ L_g⁻¹ day⁻¹) was three times lower than in SSC (V_max = 40.4 mg CO₂ L_g⁻¹ day⁻¹). The P. lilacinus hydrophobin (PLHYD) yield from the SSC was 1.3 mg PLHYD g protein⁻¹, but in SmC, this protein was not detected. The PLHYD showed a critical micelle concentration of 0.45 mg mL⁻¹. In addition, the PLHYD modified the hydrophobicity of Teflon from 130.1 ± 2° to 47 ± 2°, forming porous structures with some filaments <1 μm and globular aggregates <0.25 μm diameter. The interfacial studies of this PLHYD could be the basis for the use of the protein to modify surfaces and to stabilize compounds in emulsions.     

Bench-scale fermentation of Trichoderma viride on wastewater sludge: Rheology,lytic enzymes and biocontrol activity

Conidiation and lytic enzyme production by Trichoderma viride at different solids concentration of pre-treated municipal wastewater sludge was examined in a 15-L fermenter. The maximum conidia concentration (5.94 × 10⁷ CFU mL⁻¹ at 96 h) was obtained at 30 g L⁻¹ suspended solids. The maximum lytic enzyme activities were achieved around 12–30 h of fermentation. Bioassay against a fungal phytopathogen, Fusarium sp. showed maximum activity in the sample drawn around 96 h of fermentation at 30 g L⁻¹ suspended solids concentration. Entomotoxicity against spruce budworm larvae showed maximum value ≈17290 SBU μL⁻¹ at 30 g L⁻¹ suspended solids concentration at the end of fermentation (96 h). Plant bioassay showed dual action of T. viride, i.e., disease prevention and growth promotion. The rheological analyses of fermentation sludges showed the pseudoplastic behaviour. In order to maintain required dissolved oxygen concentration ≥30%, the agitation and aeration requirements significantly increased at 35 g L⁻¹ compared to 30 and 25 g L⁻¹. The oxygen uptake rate and volumetric oxygen mass transfer coefficient, k_La at 35 g L⁻¹ did not increase in comparison to 30 g L⁻¹ due to rheological complexity of the broth during fermentation. Thus, the successful fermentation operation of the biocontrol fungus T. viride is a rational indication of its potential for mass-scale production for agriculture and forest sector as a biocontrol agent.     

Forming nanoparticles of α-amylase and embedding them into solid surfaces

In the current work nanoparticles (NPs) of α-amylase were generated in an aqueous solution using high-intensity ultrasound, and were subsequently immobilized on polyethylene (PE) films, or polycarbonate (PC) plates, or on microscope glass slides. The α-amylase NPs coated on the solid surfaces have been characterized by ESEM, TEM, FTIR, XPS and AFM. The substrates immobilized with α-amylase were used for hydrolyzing soluble potato starch to maltose. The amount of enzyme introduced in the substrates, leaching properties, and the catalytic activity of the immobilized enzyme were compared. The catalytic activity of the amylase deposited on the three solid surfaces was compared to that of the same amount of free enzyme at different pHs and temperatures. α-Amylase coated on PE showed the best catalytic activity in all the examined parameters when compared to native amylase, especially at high temperatures. When immobilized on glass, α-amylase showed better activity than the native enzyme over all pH and temperature values studied. However, the immobilization on PC did not improve the enzyme activity at any pH and any temperature compared to the free amylase. The kinetic parameters, K_m and V_max were also calculated. The amylase coated PE showed the most favorable kinetic parameters (K_m = 5 g L⁻¹ and V_max = 5E−07 mol mL⁻¹ min⁻¹). In contrast, the anchored enzyme-PC exhibited unfavorable kinetic parameters (K_m = 16 g L⁻¹, V_max = 4.2E−07 mol mL⁻¹ min⁻¹). The corresponding values for amylase-glass were K_m = 7 g L⁻¹, V_max = 1.8E−07 mol mL⁻¹ min⁻¹, relative to those obtained for the free enzyme (K_m = 6.6 g L⁻¹, V_max = 3.3E−07 mol mL⁻¹ min⁻¹).     

Effects of feed sugar concentration on continuous ethanol fermentation of cheese whey powder solution (CWP)

Cheese whey powder (CWP) solution with different CWP or sugar concentrations was fermented to ethanol in a continuous fermenter using pure culture of Kluyveromyces marxianus (DSMZ 7239). Sugar concentration of the feed CWP solution varied between 55 and 200 g l⁻¹ while the hydraulic residence time (HRT) was kept constant at 54 h. Ethanol formation, sugar utilization and biomass formation were investigated as functions of the feed sugar concentration. Percent sugar utilization and biomass concentrations decreased and the effluent sugar concentration increased with increasing feed sugar concentrations especially for the feed sugar contents above 100 g l⁻¹. Ethanol concentration and productivity (DP) increased with increasing feed sugar up to 100 g l⁻¹ and then decreased with further increases in the feed sugar content. The highest ethanol concentration (3.7%, v v⁻¹) and productivity (0.54 gE l⁻¹ h⁻¹) were obtained with the feed sugar content of 100 g l⁻¹ or 125 g l⁻¹. The ethanol yield coefficient (Y_P/S) was also maximum (0.49 gE gS⁻¹) when the feed sugar was between 100 and 125 g l⁻¹. The growth yield coefficient (Y_X/S) decreased steadily from 0.123 to 0.063 gX gS⁻¹ when the feed sugar increased from 55 to 200 g l⁻¹ due to adverse effects of high sugar contents on yeast growth. The optimal feed sugar concentration maximizing the ethanol productivity and sugar utilization was between 100 and 125 g l⁻¹ under the specified experimental conditions.     

Functional consortium for hydrogen production from cellobiose: Concentration-to-extinction approach

A functional bacterial consortium that can effectively hydrolyze cellobiose and produce bio-hydrogen was isolated by a concentration-to-extinction approach. The sludge from a cattle feedlot manure composting plant was incubated with 2.5–20 g l^?1 cellobiose at 35 °C and pH 6.0. The microbial diversity of serially concentrated suspensions significantly decreased following increasing cellobiose concentration, finally leaving only two viable strains, Clostridium butyricum strain W4 and Enterococcus saccharolyticus strain. This consortium has a maximum specific hydrogen production rate of 2.19 mol H₂ mol hexose^?1 at 5 g l^?1 cellobiose. The metabolic pathways shifted from ethanol-type to acetate-butyrate type as cellobiose concentration increased from 2.5 to >7 g l^?1. The concentration-to-extinction approach is effective for isolating functional consortium from natural microflora. In this case the functional strains of interest are more tolerant to the increased loadings of substrates than the non-functional strains.     

Volatile fatty acids accumulation and rhamnolipid generation in situ from waste activated sludge fermentation stimulated by external rhamnolipid addition

The solubilization and acidification of waste activated sludge (WAS) were apparently enhanced by external rhamnolipid (RL) addition. The maximum solute carbohydrate concentrations increased linearly from 48 ± 5 mg COD L⁻¹ in the un-pretreated WAS (blank) to 566 ± 19 mg COD L⁻¹, and protein increased from 1050 ± 8 to 3493 ± 16 mg COD L⁻¹ at RL dosage of 0.10 g g⁻¹ TSS. The highest VFAs concentration peaked at 3840 mg COD L⁻¹ at RL dosage of 0.04 g g⁻¹ TSS, which was 4.24-fold higher than the blank test. RL was generated in situ during WAS fermentation when external RL was added. It was detected that RL concentration was increased from initial 880 ± 92 mg L⁻¹ to 1312 ± 7 mg L⁻¹ at the end of 96 h with RL dosage of 0.04 g g⁻¹ TSS, which was increased to 1.49-fold. Meanwhile, methane production was notably reduced to a quite low level of 2.0 mL CH₄ g⁻¹ VSS, showing effective inhibition of methanogens by RL (58.8 mL CH₄ g⁻¹ VSS in the blank). In addition, the activity of hydrolytic enzymes (protease and α-glucosidase) was enhanced accordingly. VFAs accumulation and RL generation in situ demonstrated that the additional RL substantially performed enhanced biological effects for waste activated sludge fermentation.     

Investigation on the properties and kinetics of glucose-fed aerobic granular sludge

Aerobic granulation is a process in which suspended biomass aggregate and form discrete well-defined granules in aerobic systems. To investigate the properties and kinetics of aerobic granular sludge, aerobic granules were cultivated with glucose synthetic wastewater in a series of sequencing batch reactors (SBR). The spherical shaped granules were observed on 8th day with the mean diameter of 0.1 mm. With the organic loading rate (OLR) being increased to 4.0 g COD L⁻¹ d⁻¹, aerobic granules grew matured with spherical shape. The size of granules ranged from 1.2 to 1.8 mm, and the corresponding settling velocity of individual granule was 24.2–36.4 m h⁻¹. The oxygen utilization rate (OUR) of mature granules was 41.90 g O₂ kg MLSS⁻¹ h⁻¹, which was two times higher than that of activated sludge (18.32 g O₂ kg MLSS⁻¹ h⁻¹). The experimental data indicated that the substrate utilization and biomass growth kinetics generally followed Monod's kinetics model. The corresponding kinetic coefficients of k (maximum specific substrate utilization rate), K_s (half velocity coefficient), Y (growth yield coefficient) and K_d (decay coefficient) were determined as follows, k_c = 23.65 d⁻¹, K_c = 3367.05 mg L⁻¹, K_N = 0.038 d⁻¹, K_N = 29.65 mg L⁻¹, Y = 0.1927–0.2022 mg MMLS (mg COD)⁻¹ and K_d = 0.00845–0.0135 d⁻¹, respectively. Those properties of aerobic granules made aerobic granules system had a short setup period, high substrate utilization rate and low sludge production.     

Inhibition of Fe2+- and Fe3+- induced hydroxyl radical production by the iron-chelating drug deferiprone

Deferiprone (L1) is an effective iron-chelating drug that is widely used for the treatment of iron-overload diseases. It is known that in aqueous solutions Fe²⁺ and Fe³⁺ ions can produce hydroxyl radicals via Fenton and photo-Fenton reactions. Although previous studies with Fe²⁺ have reported ferroxidase activity by L1 followed by the formation of Fe³⁺ chelate complexes and potential inhibition of Fenton reaction, no detailed data are available on the molecular antioxidant mechanisms involved. Similarly, in vitro studies have also shown that L1–Fe³⁺ complexes exhibit intense absorption bands up to 800 nm and might be potential sources of phototoxicity. In this study we have applied an EPR spin trapping technique to answer two questions: (1) does L1 inhibit the Fenton reaction catalyzed by Fe²⁺ and Fe³⁺ ions and (2) does UV–Vis irradiation of the L1–Fe³⁺ complex result in the formation of reactive oxygen species. PBN and TMIO spin traps were used for detection of oxygen free radicals, and TEMP was used to trap singlet oxygen if it was formed via energy transfer from L1 in the triplet excited state. It was demonstrated that irradiation of Fe³⁺ aqua complexes by UV and visible light in the presence of spin traps results in the appearance of an EPR signal of the OH spin adduct (TMIO–OH, a(N)=14.15 G, a(H)=16.25 G; PBN–OH, a(N)=16.0 G, a(H)=2.7 G). The presence of L1 completely inhibited the OH radical production. The mechanism of OH spin adduct formation was confirmed by the detection of methyl radicals in the presence of dimethyl sulfoxide. No formation of singlet oxygen was detected under irradiation of L1 or its iron complexes. Furthermore, the interaction of L1 with Fe²⁺ ions completely inhibited hydroxyl radical production in the presence of hydrogen peroxide. These findings confirm an antioxidant targeting potential of L1 in diseases related to oxidative damage.     

Signal transducer and oxidative stress mediated modulation of phenylpropanoid pathway to enhance rosmarinic acid biosynthesis in fungi elicited whole plant culture of Solenostemon scutellarioides

This study aimed to improve rosmarinic acid (RA) production in the whole plant culture of Solenostemon scutellarioides through elicitation with phytopathogenic fungi. Amongst selected fungi, Aternaria alternata caused significant elevation (p < 0.05–0.01) in RA accumulation (∼1.3–1.6-fold) between 25 and 100 μg l⁻¹. However, elicitation at the dose of 50 μg l⁻¹ has been found to be most effective and intracellular RA content reached almost ∼1.6-fold (p < 0.01) higher in day 7. Therefore, A. alternata (50 μg l⁻¹) was selected for mechanism evaluation. A significant elevation of intercellular jasmonic acid was observed up to day 6 after elicitation with A. alternata (50 μg l⁻¹). A significant increase in tissue H₂O₂ and lipid peroxidation coupled with depletion of antioxidant enzymes superoxide dismutase and catalase indicated augmented oxidative stress associated with biotic interaction. Preceding the elicitor-induced RA accumulation, a notable alteration in the specific activities of biosynthetic enzymes namely PAL and TAT was recorded, while, no significant change in the activities of RAS was observed. HPPR activity was slightly improved in elicited plant. Therefore, it could be concluded that A. alternata elicited the biosynthesis of rosmarinic acid via signal transduction through jasmonic acid coupled with elicitor induced oxidative stress and associated mechanism.