BAY 41-4109 has multiple effects on Hepatitis B virus capsid assembly

Here we report the effect of a heteroaryldihydropyrimidine (HAP) antiviral compound, BAY 41-4109, on Hepatitis B virus (HBV) capsid assembly and on preformed HBV capsids. The HBV capsid is an icosahedral complex of 120 capsid protein dimers. BAY41-4109 inhibits virus production in vivo by a mechanism that targets the viral capsid. We found that BAY 41-4109 was able to both accelerate and misdirect capsid assembly in vitro. As little as one HAP molecule for every five HBV dimers was sufficient to induce formation of non-capsid polymers. Unlike the related molecule HAP-1 (Stray et al., Proc. Natl. Acad. Sci. USA 102:8138-43, 2005), no stable assembly intermediates were observed in assembly reactions with BAY 41-4109, indicating that accelerated assembly by BAY 41-4109 was still kinetically regulated by the nucleation rate. Preformed capsids were stabilized by BAY 41-4109, up to a ratio of one inhibitor molecule per two dimers. However, at BAY 41-4109:dimer ratios of 1:1 and greater, capsids were destabilized to yield very large non-capsid polymers. These data suggest the existence of two functionally distinguishable classes of drug-binding sites on HBV capsids. Occupation of the first class of site stabilizes capsid, while binding at the second class requires or induces structural changes that cannot be tolerated without destabilizing the capsid. Our data suggest that HAP compounds may inhibit virus replication by inducing assembly inappropriately and, when in excess, by misdirecting assembly decreasing the stability of normal capsids.     

A theoretical model successfully identifies features of hepatitis B virus capsid assembly.

The capsids of most spherical viruses are icosahedral, an arrangement of multiples of 60 subunits. Though it is a salient point in the life cycle of any virus, the physical chemistry of virus capsid assembly is poorly understood. We have developed general models of capsid assembly that describe the process in terms of a cascade of low order association reactions. The models predict sigmoidal assembly kinetics, where intermediates approach a low steady state concentration for the greater part of the reaction. Features of the overall reaction can be identified on the basis of the concentration dependence of assembly. In simulations, and on the basis of our understanding of the models, we find that nucleus size and the order of subsequent "elongation" reactions are reflected in the concentration dependence of the extent of the reaction and the rate of the fast phase, respectively. The reaction kinetics deduced for our models of virus assembly can be related to the assembly of any "spherical" polymer. Using light scattering and size exclusion chromatography, we observed polymerization of assembly domain dimers of hepatitis B virus (HBV) capsid protein. Empty capsids assemble at a rate that is a function of protein concentration and ionic strength. The kinetics of capsid formation were sigmoidal, where the rate of the fast phase had second-power concentration dependence. The extent of assembly had third-power concentration dependence. Simulations based on the models recapitulated the concentration dependences observed for HBV capsid assembly. These results strongly suggest that in vitro HBV assembly is nucleated by a trimer of dimers and proceeds by the addition of individual dimeric subunits. On the basis of this mechanism, we suggest that HBV capsid assembly could be an important target for antiviral therapeutics.     

Weak protein-protein interactions are sufficient to drive assembly of hepatitis B virus capsids

Hepatitis B virus (HBV) is an enveloped DNA virus with a spherical capsid (or core). The capsid is constructed from 120 copies of the homodimeric capsid protein arranged with T = 4 icosahedral symmetry. We examined in vitro assembly of purified E. coli expressed HBV capsid protein. After equilibration, concentrations of capsid and dimer were evaluated by size exclusion chromatography. The extent of assembly increased as temperature and ionic strength increased. The concentration dependence of capsid assembly conformed to the equilibrium expression: K(capsid) = [capsid]/[dimer](120). Given the known geometry for HBV capsids and dimers, the per capsid assembly energy was partitioned into energy per subunit-subunit contact. We were able to make three major conclusions. (i) Weak interactions (from -2.9 kcal/mol at 21 degrees C in low salt to -4.4 kcal/mol at 37 degrees C in high salt) at each intersubunit contact result in a globally stable capsid; weak intersubunit interactions may be the basis for the phenomenon of capsid breathing. (ii) HBV assembly is characterized by positive enthalpy and entropy. The reaction is entropy-driven, consistent with the largely hydrophobic contacts found in the crystal structure. (iii) Increasing NaCl concentration increases the magnitude of free energy, enthalpy, and entropy, as if ionic strength were increasing the amount of hydrophobic surface buried by assembly. This last point leads us to suggest that salt acts by inducing a conformational change in the dimer from an assembly-inactive form to an assembly-active form. This model of conformational change linked to assembly is consistent with immunological differences between dimer and capsid.     

Assembly Pathway of Hepatitis B Core Virus-like Particles from Genetically Fused Dimers

Macromolecular complexes are responsible for many key biological processes. However, in most cases details of the assembly/disassembly of such complexes are unknown at the molecular level, as the low abundance and transient nature of assembly intermediates make analysis challenging. The assembly of virus capsids is an example of such a process. The hepatitis B virus capsid (core) can be composed of either 90 or 120 dimers of coat protein. Previous studies have proposed a trimer of dimers as an important intermediate species in assembly, acting to nucleate further assembly by dimer addition. Using novel genetically-fused coat protein dimers, we have been able to trap higher-order assembly intermediates and to demonstrate for the first time that both dimeric and trimeric complexes are on pathway to virus-like particle (capsid) formation.     

A small molecule inhibits and misdirects assembly of hepatitis B virus capsids

Hepatitis B virus (HBV) capsids play an important role in viral nucleic acid metabolism and other elements of the virus life cycle. Misdirection of capsid assembly (leading to formation of aberrant particles) may be a powerful approach to interfere with virus production. HBV capsids can be assembled in vitro from the dimeric capsid protein. We show that a small molecule, bis-ANS, binds to capsid protein, inhibiting assembly of normal capsids and promoting assembly of noncapsid polymers. Using equilibrium dialysis to investigate binding of bis-ANS to free capsid protein, we found that only one bis-ANS molecule binds per capsid protein dimer, with an association energy of -28.0 +/- 2.0 kJ/mol (-6.7 +/- 0.5 kcal/mol). Bis-ANS inhibited in vitro capsid assembly induced by ionic strength as observed by light scattering and size exclusion chromatography. The binding energy of bis-ANS for capsid protein calculated from assembly inhibition data was -24.5 +/- 0.9 kJ/mol (-5.9 +/- 0.2 kcal/mol), essentially the same binding energy observed in studies of unassembled protein. These data indicate that capsid protein bound to bis-ANS did not participate in assembly; this mechanism of assembly inhibition is analogous to competitive or noncompetitive inhibition of enzymes. While assembly of normal capsids is inhibited, our data suggest that bis-ANS leads to formation of noncapsid polymers. Evidence of aberrant polymers was identified by light scattering and electron microscopy. We propose that bis-ANS acts as a molecular "wedge" that interferes with normal capsid protein geometry and capsid formation; such wedges may represent a new class of antiviral agent.     

A molecular breadboard: Removal and replacement of subunits in a hepatitis B virus capsid

Hepatitis B virus (HBV) core protein is a model system for studying assembly and disassembly of icosahedral structures. Controlling disassembly will allow re‐engineering the 120 subunit HBV capsid, making it a molecular breadboard. We examined removal of subunits from partially crosslinked capsids to form stable incomplete particles. To characterize incomplete capsids, we used two single molecule techniques, resistive‐pulse sensing and charge detection mass spectrometry. We expected to find a binomial distribution of capsid fragments. Instead, we found a preponderance of 3 MDa complexes (90 subunits) and no fragments smaller than 3 MDa. We also found 90‐mers in the disassembly of uncrosslinked HBV capsids. 90‐mers seem to be a common pause point in disassembly reactions. Partly explaining this result, graph theory simulations have showed a threshold for capsid stability between 80 and 90 subunits. To test a molecular breadboard concept, we showed that missing subunits could be refilled resulting in chimeric, 120 subunit particles. This result may be a means of assembling unique capsids with functional decorations.     

Interaction between nucleophosmin and HBV core protein increases HBV capsid assembly

Host factors are involved in Hepatitis B virus (HBV) genome replication and capsid formation during the viral life cycle. A host factor, nucleophosmin (B23), was found to bind to HBV core protein dimers, but its functional role has not been studied. This interaction promoted HBV capsid assembly and decreased the degree of capsid dissociation when subjected to denaturant treatments in vitro. In addition, inhibition of B23 reduced intracellular capsid formation resulting in a decrease of HBV production in HepG2.2.15 cells. These results provide important evidence that B23 acts on core capsid assembly via its interaction with HBV core dimers.     

Nuclear Entry of Hepatitis B Virus Capsids Involves Disintegration to Protein Dimers followed by Nuclear Reassociation to Capsids

Assembly and disassembly of viral capsids are essential steps in the viral life cycle. Studies on their kinetics are mostly performed in vitro, allowing application of biochemical, biophysical and visualizing techniques. In vivo kinetics are poorly understood and the transferability of the in vitro models to the cellular environment remains speculative. We analyzed capsid disassembly of the hepatitis B virus in digitonin-permeabilized cells which support nuclear capsid entry and subsequent genome release. Using gradient centrifugation, size exclusion chromatography and immune fluorescence microscopy of digitonin-permeabilized cells, we showed that capsids open and close reversibly. In the absence of RNA, capsid re-assembly slows down; the capsids remain disintegrated and enter the nucleus as protein dimers or irregular polymers. Upon the presence of cellular RNA, capsids re-assemble in the nucleus. We conclude that reversible genome release from hepatitis B virus capsids is a unique strategy different from that of other viruses, which employs irreversible capsid destruction for genome release. The results allowed us to propose a model of HBV genome release in which the unique environment of the nuclear pore favors HBV capsid disassembly reaction, while both cytoplasm and nucleus favor capsid assembly.     

Cys residues of the hepatitis B virus capsid protein are not essential for the assembly of viral core particles but can influence their stability.

In the spherical capsid of hepatitis B virus (HBV), intermolecular disulfide bonds cross-link the approximately 180 p21.5 capsid protein subunits into a stable lattice. In this study, we used mutant capsid proteins to investigate the role that disulfide bonds and the four p21.5 Cys residues (positions 48, 61, 107, and 185) play in capsid assembly and/or stabilization. p21.5 Cys residues were either replaced by Ala or removed (Cys-185) by carboxyl-terminal truncation, creating Cys-minus mutants which were expressed in Xenopus oocytes via microinjected synthetic mRNAs. Fractionation of radiolabeled oocyte extracts on 10 to 60% sucrose gradients revealed that Cys-minus core proteins resolved into the nonparticulate and capsid forms seen for wild-type p21.5. On 5 to 30% sucrose gradients, nonparticulate Cys-minus core proteins sedimented as dimers of approximately 40 kDa. We conclude that Cys residues and disulfides are not required for the assembly of either HBV capsids or the dimers that provide the precursors for capsid assembly. Since assembly presumably demands an appropriate p21.5 tertiary structure, it is unlikely that Cys residues are required for proper p21.5 folding. However, Cys residues stabilize isolated p21.5 structures, as evidenced by the marked reduction in stability of Cys-minus dimers and capsids (i) in nonreducing sodium dodecyl sulfate-polyacrylamide gel electrophoresis and (ii) upon protease digestion. We discuss these results in the context of the HBV life cycle and the role of Cys residues in other proteins.     

Global structural changes in hepatitis B virus capsids induced by the assembly effector HAP1

Hepatitis B virus (HBV) is a leading cause of liver disease and hepatocellular carcinoma; over 400 million people are chronically infected with HBV. Specific anti-HBV treatments, like most antivirals, target enzymes that are similar to host proteins. Virus capsid protein has no human homolog, making its assembly a promising but undeveloped therapeutic target. HAP1 [methyl 4-(2-chloro-4-fluorophenyl)-6-methyl-2-(pyridin-2-yl)-1,4-dihydropyrimidine-5-carboxylate], a heteroaryldihydropyrimidine, is a potent HBV capsid assembly activator and misdirector. Knowledge of the structural basis for this activity would directly benefit the development of capsid-targeting therapeutic strategies. This report details the crystal structures of icosahedral HBV capsids with and without HAP1. We show that HAP1 leads to global structural changes by movements of subunits as connected rigid bodies. The observed movements cause the fivefold vertices to protrude from the liganded capsid, the threefold vertices to open, and the quasi-sixfold vertices to flatten, explaining the effects of HAP1 on assembled capsids and on the assembly process. We have identified a likely HAP1-binding site that bridges elements of secondary structure within a capsid-bound monomer, offering explanation for assembly activation. This site also interferes with interactions between capsid proteins, leading to quaternary changes and presumably assembly misdirection. These results demonstrate the plasticity of HBV capsids and the molecular basis for a tenable antiviral strategy.     

Hepatitis B virus capsid assembly is enhanced by naturally occurring mutation F97L

In chronic hepatitis B virus (HBV) infections, one of the most common mutations to the virus occurs at amino acid 97 of the core protein, where leucine replaces either phenylalanine or isoleucine, depending on strain. This mutation correlates with changes in viral nucleic acid metabolism and/or secretion. We hypothesize that this phenotype is due in part to altered core assembly, a process required for DNA synthesis. We examined in vitro assembly of empty HBV capsids from wild-type and F97L core protein assembly domains. The mutation enhanced both the rate and extent of assembly relative to those for the wild-type protein. The difference between the two proteins was most obvious in the temperature dependence of assembly, which was dramatically stronger for the mutant protein, indicating a much more positive enthalpy. Since the structures of the mutant and wild-type capsids are essentially the same and the mutation is not involved in the contact between dimers, we suggest that the F97L mutation affects the dynamic behavior of dimer and capsid.     

A micromolar pool of antigenically distinct precursors is required to initiate cooperative assembly of hepatitis B virus capsids in Xenopus oocytes.

Assembly of hepatitis B virus capsid-like (core) particles occurs efficiently in a variety of heterologous systems via aggregation of approximately 180 molecules of a single 21.5-kDa core protein (p21.5), resulting in an icosahedral capsid structure with T = 3 symmetry. Recent studies on the assembly of hepatitis B virus core particles in Xenopus oocytes suggested that dimers of p21.5 represent the major building block from which capsids are generated. Here we determined the concentration dependence of this assembly process. By injecting serially diluted synthetic p21.5 mRNA into Xenopus oocytes, we expressed different levels of intracellular p21.5 and monitored the production of p21.5 dimers and capsids by radiolabeling and immunoprecipitation, by radioimmunoassay, or by quantitative enzyme-linked immunosorbent assay analysis. The data revealed that (i) p21.5 dimers and capsids are antigenically distinct, (ii) capsid assembly is a highly cooperative and concentration-dependent process, and (iii) p21.5 must accumulate to a signature concentration of approximately 0.7 to 0.8 microM before capsid assembly initiates. This assembly process is strikingly similar to the assembly of RNA bacteriophage R17 as defined by in vitro studies.     

Zinc ions trigger conformational change and oligomerization of hepatitis B virus capsid protein

Assembly of virus particles in infected cells is likely to be a tightly regulated process. Previously, we found that in vitro assembly of hepatitis B virus (HBV) capsid protein is highly dependent on protein and NaCl concentration. Here we show that micromolar concentrations of Zn2+ are sufficient to initiate assembly of capsid protein, whereas other mono- and divalent cations elicited assembly only at millimolar concentrations, similar to those required for NaCl-induced assembly. Altered intrinsic protein fluorescence and highly cooperative binding of at least four Zn2+ ions (KD approximately 7 microM) indicated that binding induced a conformational change in capsid protein. At 37 degrees C, Zn2+ enhanced the initial rate of assembly and produced normal capsids, but it did not alter the extent of assembly at equilibrium. Assembly mediated by high zinc concentrations (> or =300 microM) yielded few capsids but produced a population of oligomers recognized by capsid-specific antibodies, suggesting a kinetically trapped assembly reaction. Comparison of kinetic simulations to in vitro assembly reactions leads us to suggest that kinetic trapping was due to the enhancement of the nucleation rate relative to the elongation rate. Zinc-induced HBV assembly has hallmarks of an allosterically regulated process: ligand binding at one site influences binding at other sites (cooperativity) indicating that binding is associated with conformational change, and binding of ligand alters the biological activity of assembly. We conclude that zinc binding enhances the kinetics of assembly by promoting formation of an intermediate that is readily consumed in the reaction. Free zinc ions may not be the true in vivo activator of assembly, but they provide a model for regulation of assembly.     

Mechanical disassembly of single virus particles reveals kinetic intermediates predicted by theory

New experimental approaches are required to detect the elusive transient intermediates predicted by simulations of virus assembly or disassembly. Here, an atomic force microscope (AFM) was used to mechanically induce partial disassembly of single icosahedral T=1 capsids and virions of the minute virus of mice. The kinetic intermediates formed were imaged by AFM. The results revealed that induced disassembly of single minute-virus-of-mice particles is frequently initiated by loss of one of the 20 equivalent capsomers (trimers of capsid protein subunits) leading to a stable, nearly complete particle that does not readily lose further capsomers. With lower frequency, a fairly stable, three-fourths-complete capsid lacking one pentamer of capsomers and a free, stable pentamer were obtained. The intermediates most frequently identified (capsids missing one capsomer, capsids missing one pentamer of capsomers, and free pentamers of capsomers) had been predicted in theoretical studies of reversible capsid assembly based on thermodynamic-kinetic models, molecular dynamics, or oligomerization energies. We conclude that mechanical manipulation and imaging of simple virus particles by AFM can be used to experimentally identify kinetic intermediates predicted by simulations of assembly or disassembly.     

Model-based analysis of assembly kinetics for virus capsids or other spherical polymers

The assembly of virus capsids or other spherical polymers--empty, closed structures composed of hundreds of protein subunits--is poorly understood. Assembly of a closed spherical polymer is unlike polymerization of a filament or crystal, examples of open-ended polymers. This must be considered to develop physically meaningful analyses. We have developed a model of capsid assembly, based on a cascade of low-order reactions, that allows us to calculate kinetic simulations. The behavior of this model resembles assembly kinetics observed in solution (Zlotnick, A., J. M. Johnson, P. W. Wingfield, S. J. Stahl, and D. Endres. 1999. Biochemistry. 38:14644-14652). We exhibit two examples of this general model describing assembly of dodecahedral and icosahedral capsids. Using simulations based on these examples, we demonstrate how to extract robust estimates of assembly parameters from accessible experimental data. These parameters, nucleus size, average nucleation rate, and average free energy of association can be determined from measurement of subunit and capsid as time and concentration vary. Mathematical derivations of the analyses, carried out for a general model, are provided in an Appendix. The understanding of capsid assembly developed in this paper is general; the examples provided can be readily modified to reflect different biological systems. This enhanced understanding of virus assembly will allow a more quantitative analysis of virus stability and biological or antiviral factors that affect assembly.     

The Impact of Viral RNA on the Association Rates of Capsid Protein Assembly: Bacteriophage MS2 as a Case Study

A large number of single-stranded RNA viruses, which form a major class of all viruses, co-assemble their protein container and their genomic material. The multiple roles of the viral genome in this process are presently only partly understood. Recent experimental results indicate that RNA, in addition to its function as a repository for genetic information, could play important functional roles during the assembly of the viral protein containers. An investigation of the impact of genomic RNA on the association of the protein subunits may therefore provide further insights into the mechanism of virus assembly. We study here the impact of viral RNA on the association rates of the capsid proteins during virus assembly. As a case study, we consider the viral capsid of bacteriophage MS2, which is formed from 60 asymmetric (AB) and 30 symmetric (CC) protein dimers. Using Brownian dynamics simulations, we investigate the effect of the binding of an RNA stem-loop (the translational repressor) on the association rates of the capsid protein dimers. Our analysis shows that translational repressor binding results in self-association of AB dimers being inhibited, whilst association of AB with CC dimers is greatly enhanced. This provides an explanation for experimental results in which an alternating assembly pattern of AB and CC dimer addition to the growing assembly intermediate has been observed to be the dominant mode of assembly. The presence of the RNA hence dramatically decreases the number of dominant assembly pathways and thereby reduces the complexity of the self-assembly process of these viruses.     

Conformation and mobility of the RNA-binding N-terminal part of the intact coat protein of cowpea chlorotic mottle virus. A two-dimensional proton nuclear magnetic resonance study

Two-dimensional proton nuclear magnetic resonance (n.m.r.) experiments were performed on the coat protein of cowpea chlorotic mottle virus (molecular mass: 20.2 kDa) present as dimer (pH 7.5) or as capsid consisting of 180 protein monomers (pH 5.0). The spectra of both dimers and capsids showed resonances originating from the flexible N-terminal region of the protein. The complete resonance assignment of a synthetic pentacosapeptide representing this N terminus made it possible to interpret the spectra in detail. The capsid spectrum showed backbone amide proton resonances arising from the first eight residues having a flexible random coil conformation, and side-chain resonances arising from the first 25 N-terminal amino acids. The dimer spectrum showed also side-chain resonances of residues 26 to 33, which are flexible in the dimer but immobilized in the capsid. The n.m.r. experiments indicated that the conformation of the first 25 amino acids of the protein in dimers and capsids is comparable to the conformation of the synthetic peptide, which alternates among extended and helical conformations on the n.m.r. time-scale. It is suggested that the alpha-helical region, situated in the region between residues 10 and 20, binds to the RNA during assembly of the virus particle.     

The role of subunit hinges and molecular "switches" in the control of viral capsid polymorphism

The coat protein (CP) of cowpea chlorotic mottle virus assembles exclusively into a T=3 capsid in vivo and, under proper conditions, in vitro. The N-terminal domain of CP has been implicated in proper assembly and was viewed as a required switch for mediating hexamer and pentamer formation in T=3 assembly. We observed that a mutant CP lacking most of the N-terminal domain, NDelta34, assembles, in vitro, into statistically predictable numbers of: native-like T=3 capsids of 90 dimers; "T=2" capsids of 60 dimers; T=1 capsids of 30 dimers. We generated cryo-EM image reconstructions of each form and built pseudo-atomic models based on the subunits from the crystal structure of plant-derived T=3 virus allowing a detailed comparison of stabilizing interactions in the three assemblies. The statistical nature of the distribution of assembly products and the observed structures indicates that the N-terminus of CP is not a switch that is required to form the proper ratio of hexamers and pentamers for T=3 assembly; rather, it biases the direction of assembly to T=3 particles from the possibilities available to NDelta34 through flexible dimer hinges and variations in subunit contacts. Our results are consistent with a pentamer of dimers (PODs) nucleating assembly in all cases but subunit dimers can be added with different trajectories that favor specific T=3 or T=1 global particle geometries. Formation of the "T=2" particles appears to be fundamentally different in that they not only nucleate with PODs, but assembly propagates by the addition of mostly, if not exclusively PODs generating an entirely new subunit interface in the process. These results show that capsid geometry is flexible and may readily adapt to new requirements as the virus evolves.