Development of a simple proton nuclear magnetic resonance-based procedure to estimate the approximate distribution coefficient at physiological pH (log D7.4): Evaluation and comparison to existing practices

In drug discovery, lipophilicity is a key parameter for drug optimization. Lipophilicity determinations can be both work and time consuming, especially for non-UV active compounds. Herein, an improved and simple 1H NMR-based method is described to estimate the lipophilicity at physiological pH (log D_7.4) in 1-octanol and D₂O buffer. The method can be applied to both UV and non-UV active compounds. In addition, neither calibration curves nor internal/external standards are needed. We have demonstrated that log D_7.4 can be accurately measured using 1H NMR for compounds within the log D_7.4 interval between 0.7 and 3.3. The method was also compared to a previously described HPLC method.     

Bile acid structure-activity relationship: evaluation of bile acid lipophilicity using 1-octanol/water partition coefficient and reverse phase HPLC

Two independent methods have been developed and compared to determine the lipophilicity of a representative series of naturally occurring bile acids (BA) in relation to their structure. The BA included cholic acid (CA), chenodeoxycholic acid (CDCA), ursodeoxycholic acid (UDCA), deoxycholic acid (DCA), hyodeoxycholic acid (HDCA), ursocholic acid (UCA), hyocholic acid (HCA), as well as their glycine and taurine amidates. Lipophilicity was determined using a 1-octanol/water shake-flask procedure and the experiments were performed at different pH and ionic strengths and at initial BA concentrations below their critical micellar concentrations (CMC) and the water solubility of the protonated form. The experimental data show that both the protonated (HA) and ionized (A-) forms of BA can distribute in 1-octanol, and consequently a partition coefficient for HA (logP' HA) and for A- (logP' A-) must be defined. An equation to predict a weighted apparent distribution coefficient (D) value as a function of pH and pKa has been developed and fits well with the experimental data. Differences between logP for protonated and ionized species for unconjugated BA were in the order of 1 log unit, which increased to 2 for glycine-amidate BA. The partition coefficient of the A- form increased with Na+ concentration and total ionic strength, suggesting an ion-pair mechanism for its partition into 1-octanol. Lipophilicity was also assessed using reverse phase chromatography (C-18-HPLC), and a capacity factor (K') for ionized species was determined. Despite a broad correlation with the logP data, some BA behaved differently. The logP values showed that the order of lipophilicity was DCA greater than CDCA greater than UDCA greater than HDCA greater than HCA greater than CA greater than UCA for both the protonated and ionized unconjugated and glycine-amidate BA, while the K' data showed an inversion for some BA, i.e., DCA greater than CDCA greater than CA greater than HCA greater than UDCA greater than HDCA greater than UCA. The logP data fitted well with other indirect measurements of BA monomeric lipophilicity such as albumin binding or accessible total hydrophobic surface area data calculated by energy minimization and molecular computer graphics. Differences between unconjugated and amidated BA are consistent with the presence of an amide bond and a lower pKa when pH dependence was studied. Capacity factors, on the other hand, were related to properties of BA micelles such as cholesterol-solubilizing capacity and membrane disruption, reflecting the BA detergency.(ABSTRACT TRUNCATED AT 400 WORDS)     

Tuning of lipophilicity and cytotoxic potency by structural variation of anticancer platinum(IV) complexes

A series of bis(carboxylato)dichlorido(ethane-1,2-diamine)platinum(IV) compounds with IC₅₀ values ranging between 142 μM and 18 nM was investigated with respect to their lipophilicity (by the shake flask method as well as microemulsion electrokinetic chromatography), reduction potential, as well as their cellular accumulation in cancer cells in vitro. In general, the antiproliferative properties of the complexes correlated with their lipophilicity as well as their accumulation, whereas differences in antiproliferative potency could not be explained by reduction potentials since they do not vary significantly within the investigated series of compounds. Only minor effects for complexes featuring polar end groups were detected.     

The role of lipophilicity in the inhibition of polymorphic cytochrome P450IID6 oxidation by beta-blocking agents in vitro.

The importance of lipophilicity as a determinant of the affinity of beta-adrenoceptor blocking agents for a specific human hepatic monooxygenase--cytochrome P450IID6 (responsible for the debrisoquine-type of oxidation polymorphism)--was investigated in vitro by estimating the inhibition constants of a series of compounds in a microsomal system with monitoring of the kinetics of dextromethorphan O-demethylation. Lipophilicity is a key predictor of the affinity of beta-blocking drugs for cytochrome P450IID6 and of their potential to cause specific competitive drug interactions, but more complex structural factors appear to be important as well. A high lipophilicity is also a necessary, but not a sufficient condition for these compounds to be metabolized by cytochrome P450IID6.     

Bioreactor operated production of lipase: castor oil hydrolysis using partially-purified lipase.

A highly stable lipase from Pseudomonas aeruginosa KKA-5 was produced by batch cultivation technique employing shake flask and 5 L-bioreactor. The bioreactor was run at different airflow rates. Low airflow rates (1 and 3 L/min), did not lead to effective growth and lipase production. Growth increased by about one order and lipase production increased by about 6 times, at an airflow rate of 5 L/min. Lipase production occurred during decelerated cell growth. A highly stable lipase was produced which retained its activity in the running bioreactor, even after a period of one month. This stable lipase was partially-purified using ammonium sulphate precipitation technique. Castor oil was hydrolyzed using 300U crude and partially-purified lipase, each. Approximately 21-fold, partially-purified lipase could hydrolyze 81% castor oil within a period of 96 hr, where as only 63% hydrolysis was obtained, in 216 hour, when crude lipase was used.     

Prediction of the adaptability of Pseudomonas putida DOT-T1E to a second phase of a solvent for economically sound two-phase biotransformations

The strain Pseudomonas putida DOT-T1E was tested for its ability to tolerate second phases of different alkanols for their use as solvents in two-liquid-phase biotransformations. Although 1-decanol showed an about 10-fold higher toxicity to the cells than 1-octanol, the cells were able to adapt completely to 1-decanol only and could not be adapted in order to grow stably in the presence of a second phase of 1-octanol. The main explanation for this observation can be seen in the higher water and membrane solubility of 1-octanol. The hydrophobicity (log P) of a substance correlates with a certain partitioning of that compound into the membrane. Combining the log P value with the water solubility, the maximum membrane concentration of a compound can be calculated. With this simple calculation, it is possible to predict the property of an organic chemical for its potential applicability as a solvent for two-liquid-phase biotransformations with solvent-tolerant P. putida strains. Only compounds that show a maximum membrane concentration of less than 400 mM, such as 1-decanol, seem to be tolerated by these bacterial strains when applied in supersaturating concentrations to the medium. Taking into consideration that a solvent for a two-liquid-phase system should possess partitioning properties for potential substrates and products of a fine chemical synthesis, it can be seen that 1-decanol is a suitable solvent for such biotransformation processes. This was also demonstrated in shake cultures, where increasing amounts of a second phase of 1-decanol led to bacteria tolerating higher concentrations of the model substrate 3-nitrotoluene. Transferring this example to a 5-liter-scale bioreactor with 10% (vol/vol) 1-decanol, the amount of 3-nitrotoluene tolerated by the cells is up to 200-fold higher than in pure aqueous medium. The system demonstrates the usefulness of two-phase biotransformations utilizing solvent-tolerant bacteria.     

Prediction of the Adaptability of Pseudomonas putida DOT-T1E to a Second Phase of a Solvent for Economically Sound Two-Phase Biotransformations

The strain Pseudomonas putida DOT-T1E was tested for its ability to tolerate second phases of different alkanols for their use as solvents in two-liquid-phase biotransformations. Although 1-decanol showed an about 10-fold higher toxicity to the cells than 1-octanol, the cells were able to adapt completely to 1-decanol only and could not be adapted in order to grow stably in the presence of a second phase of 1-octanol. The main explanation for this observation can be seen in the higher water and membrane solubility of 1-octanol. The hydrophobicity (log P) of a substance correlates with a certain partitioning of that compound into the membrane. Combining the log P value with the water solubility, the maximum membrane concentration of a compound can be calculated. With this simple calculation, it is possible to predict the property of an organic chemical for its potential applicability as a solvent for two-liquid-phase biotransformations with solvent-tolerant P. putida strains. Only compounds that show a maximum membrane concentration of less than 400mM, such as 1-decanol, seem to be tolerated by these bacterial strains when applied in supersaturating concentrations to the medium. Taking into consideration that a solvent for a two-liquid-phase system should possess partitioning properties for potential substrates and products of a fine chemical synthesis, it can be seen that 1-decanol is a suitable solvent for such biotransformation processes. This was also demonstrated in shake cultures, where increasing amounts of a second phase of 1-decanol led to bacteria tolerating higher concentrations of the model substrate 3-nitrotoluene. Transferring this example to a 5-liter-scale bioreactor with 10% (vol/vol) 1-decanol, the amount of 3-nitrotoluene tolerated by the cells is up to 200-fold higher than in pure aqueous medium. The system demonstrates the usefulness of two-phase biotransformations utilizing solvent-tolerant bacteria.     

The conversion of BTEX compounds by single and defined mixed cultures to medium-chain-length polyhydroxyalkanoate

Here, we report the use of petrochemical aromatic hydrocarbons as a feedstock for the biotechnological conversion into valuable biodegradable plastic polymers-polyhydroxyalkanoates (PHAs). We assessed the ability of the known Pseudomonas putida species that are able to utilize benzene, toluene, ethylbenzene, p-xylene (BTEX) compounds as a sole carbon and energy source for their ability to produce PHA from the single substrates. P. putida F1 is able to accumulate medium-chain-length (mcl) PHA when supplied with toluene, benzene, or ethylbenzene. P. putida mt-2 accumulates mcl-PHA when supplied with toluene or p-xylene. The highest level of PHA accumulated by cultures in shake flask was 26% cell dry weight for P. putida mt-2 supplied with p-xylene. A synthetic mixture of benzene, toluene, ethylbenzene, p-xylene, and styrene (BTEXS) which mimics the aromatic fraction of mixed plastic pyrolysis oil was supplied to a defined mixed culture of P. putida F1, mt-2, and CA-3 in the shake flasks and fermentation experiments. PHA was accumulated to 24% and to 36% of the cell dry weight of the shake flask and fermentation grown cultures respectively. In addition a three-fold higher cell density was achieved with the mixed culture grown in the bioreactor compared to shake flask experiments. A run in the 5-l fermentor resulted in the utilization of 59.6 g (67.5 ml) of the BTEXS mixture and the production of 6 g of mcl-PHA. The monomer composition of PHA accumulated by the mixed culture was the same as that accumulated by single strains supplied with single substrates with 3-hydroxydecanoic acid occurring as the predominant monomer. The purified polymer was partially crystalline with an average molecular weight of 86.9 kDa. It has a thermal degradation temperature of 350 degrees C and a glass transition temperature of -48.5 degrees C.     

Development of a stirred tank reactor system for the production of lignin peroxidases (ligninases) byPhanerochaete chrysosporium BKM-F-1767

Summary Lignin peroxidases produced byPhanerochaete chrysosporium have several important potential industrial applications based on their ability to degrade lignin and lignin-like compounds. A stirred tank reactor system for the production of lignin peroxidases is described here. Included in this study is an examination of the mechanics of pellet biocatalyst formation and the optimization of an acetate buffered medium. Higher levels of lignin peroxidase were obtained with acetate buffer compared to the other buffer systems tested. Concentrations of 0.05% (w/v) Tween 80 and 0.4 mM veratryl alcohol gave optimal lignin peroxidase activity in acetate buffered medium. In shake flask cultures, mycelial fragments in the inoculum aggregated into pellets during the first eight hours of incubation and thereafter increased in size through the eighth day. The agitation rate in shake flask cultures affected pellet size, the number of pellets formed, and lignin peroxidase activity. Transfer of fungal pellets from shake flask culture to a continuously oxygenated baffled stirred tank reactor (STR) resulted in production of high lignin peroxidase titres comparable to those of shake flask cultures when the agitation rate, oxygen dispersion and foaming were closely controlled.     

Cytotoxicity, cell cycle arrest, antioxidant activity and interaction of dibenzoxanthenes derivatives with DNA

In this study, we report the DNA interaction and cytotoxicity of four dibenzoxanthene compounds 1-4. The binding behaviors of these compounds to calf thymus DNA were studied by absorption titration, viscosity measurements. The DNA binding constants of compounds 1, 2, 3, and 4 are 5.05×10(4), 2.13×10(3), 5.10×10(4), and 3.03×10(3) M(-1), respectively. The lipophilicity of the compounds was determined by the shake flask method. The cytotoxicity of these compounds has been assessed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. These compounds exhibit high activity against BEL-7402, Hela, MG-63, and SKBR-3 cells. The cell cycle arrest was analyzed by flow cytometry. These compounds inhibit S phase of BEL-7402 and SKBR-3 cells. The experiments on antioxidant activity show that these compounds exhibit good antioxidant activity against hydroxyl radical ((?)OH).     

The scale up of mycelial shake flask fermentations: A case study of gamma linolenic acid production byMucor hiemalis IRL 51

Summary Production of gamma linolenic acid (GLA) by the filamentous fungusMucor hiemalis IRL 51 was studied in both shake flask culture and in a 10-L stirred tank fermenter. This study was conducted to assess how the results from shake flask media screening trials compared to those obtained in a 10-L stirred tank fermenter, which is assumed to be more representative of an industrial system. The results show that the biological performance in 10-L fermenters is usually the same as that in shake flask culture. There were some inconsistencies which could possibly be attributed to scale, but no large differences were systematically seen. These results show that for this filamentous fungus, shake flask culture provides a quick and inexpensive way of optimizing medium composition.     

Biofilm-specific cross-species induction of antimicrobial compounds in bacilli

An air-membrane surface (AMS) bioreactor was designed to allow bacteria to grow attached to a surface as a biofilm in contact with air. When Bacillus licheniformis strain EI-34-6, isolated from the surface of a marine alga, was grown in this reactor, cells produced antimicrobial compounds which they did not produce when they were grown in shake flask cultures. An unidentified red pigment was also produced by surface-grown cells but not by planktonically grown cells. Glycerol and ferric iron were important for the production of antimicrobial compounds and the red pigment. Release of these secondary metabolites was not due to the onset of sporulation. Cell-free spent medium recovered from beneath the reactor membrane could induce production of antimicrobial compounds and red pigment in shake flask cultures. Neither glycerol nor ferric iron was required for production of these inducer compounds. Spent medium from beneath the membrane of an AMS bioreactor culture of Bacillus subtilis strain DSM10(T) and Bacillus pumilus strain EI-25-8 could also induce production of antimicrobial compounds and a red pigment in B. licheniformis isolate EI-34-6 grown in shake flask cultures; however, the corresponding spent medium from shake flask cultures of DSM10(T) and EI-25-8 could not. These results suggest that there is a biofilm-specific cross-species signaling system which can induce planktonically grown cells to behave as if they were in a biofilm by regulating the expression of pigments and antimicrobial compounds.     

Ester derivatives of annulated tetrahydroazocines: a new class of selective acetylcholinesterase inhibitors

A series of ester derivatives of annulated tetrahydroazocines, namely 2,3,6,11-tetrahydro-1H-azocino[4,5-b]indoles (5-10), 2,3,6,7-tetrahydro-1H-azocino[5,4-b]indoles (11-14), and 4,7,8,9-tetrahydro-1H-pyrrolo[2,3-d]azocines (15-18), synthesized through an efficient 6-->8 membered ring expansion procedure, were investigated for their acetylcholinesterase (AChE) inhibitory activities. Most of the compounds acted as AChE inhibitors in vitro, with IC(50) values ranging from 5 to 40 microM. The most potent compounds 11 and 15, both as racemic mixtures, proved selective toward AChE, exhibiting selectivity ratios versus butyrylcholinesterase (BuChE) of ca. 15 and more than 20, respectively. Structure-activity studies highlighted, among other factors, lipophilicity as a property modulating the AChE inhibition potency, as shown by a reasonable parabolic correlation between pIC(50) and experimental 1-octanol/water partition coefficient (logP), which described the prevailing behavior of the examined compounds (r(2)=0.665). Molecular docking simulations using the X-ray crystal structure of AChE from Torpedo californica suggested possible binding modes of the tetrahydroazocine ester derivatives 11 and 15.     

Biofilm-Specific Cross-Species Induction of Antimicrobial Compounds in Bacilli

An air-membrane surface (AMS) bioreactor was designed to allow bacteria to grow attached to a surface as a biofilm in contact with air. When Bacillus licheniformis strain EI-34-6, isolated from the surface of a marine alga, was grown in this reactor, cells produced antimicrobial compounds which they did not produce when they were grown in shake flask cultures. An unidentified red pigment was also produced by surface-grown cells but not by planktonically grown cells. Glycerol and ferric iron were important for the production of antimicrobial compounds and the red pigment. Release of these secondary metabolites was not due to the onset of sporulation. Cell-free spent medium recovered from beneath the reactor membrane could induce production of antimicrobial compounds and red pigment in shake flask cultures. Neither glycerol nor ferric iron was required for production of these inducer compounds. Spent medium from beneath the membrane of an AMS bioreactor culture of Bacillus subtilis strain DSM10^T and Bacillus pumilus strain EI-25-8 could also induce production of antimicrobial compounds and a red pigment in B. licheniformis isolate EI-34-6 grown in shake flask cultures; however, the corresponding spent medium from shake flask cultures of DSM10^T and EI-25-8 could not. These results suggest that there is a biofilm-specific cross-species signaling system which can induce planktonically grown cells to behave as if they were in a biofilm by regulating the expression of pigments and antimicrobial compounds.     

Scaleup of ajmalicine production by plant cell cultures of Catharanthus roseus

The effect of scaleup on he production of ajmalicine by a Catharanthus roseus cell suspension culture in a selected induction medium were studied. In preliminary experiments it was observed that the culture turned brown and the production was inhibited upon transfer from a shake flask to a stirred bioreactor with forced aeration. Two factors were recognized as the potential origin of the differences between shake flask and bioreactor cultures: gas composition and mechanical shear forces. These factors were studied separately.By recirculating a large part of the exhaust gas, a comparable gas regime was obtained in a bioreactor as occurred in a shake flask cultures. This resulted in the absence of browning and a similar pattern of ajmalicine production as observed in shake flasks. The effect of shear forces could not be demonstrated. However, the experiments showed that the culture may be very sensitive to liquid phase concentrations of gaseous compounds. The effects of k(L)a, aeration rate, CO(2) production rate, and influent gas phase CO(2) concentration on the liquid phase CO(2) concentration are discussed. (c) 1993 John Wiley & Sons, Inc.     

Microbial transformation of fructose to mannitol by Lactobacillus sp. KY-107

The production of extracellular mannitol from fructose and by an efficient mannitol-producing bacteria, Lactobacillus sp. KY-107, was studied in shake flask cultures. A final concentration of 70 g mannitol/l from 100 g D-fructose/l was obtained without any by-product within 80 h at 28°C.     

Enhanced production of l‐lactic acid by Lactobacillus thermophilus SRZ50 mutant generated by high‐linear energy transfer heavy ion mutagenesis

The aim of this study was to improve l ‐lactic acid production of Lactobacillus thermophilus SRZ50. For this purpose, high efficient heavy‐ion mutagenesis technique was performed using SRZ50 as the original strain. To enhance the screening efficiency for high yield l ‐lactic acid producers, a scale‐down from shake flask to microtiter plate was developed. The results showed that 24‐well U‐bottom MTPs could well alternate shake flasks for L. thermophilus cultivation as a scale‐down tool due to its a very good comparability to the shake flasks. Based on this microtiter plate screening method, two high l ‐lactic acid productivity mutants, A59 and A69, were successfully screened out, which presented, respectively, 15.8 and 16.2% higher productivities than that of the original strain. Based on fed‐batch fermentation, the A69 mutant can accumulate 114.2 g/L l ‐lactic acid at 96 h. Hence, the proposed traditional microbial breeding method with efficient high‐throughput screening assay was proved to be an appropriate strategy to obtain lactic acid‐overproducing strain.     

Molecular characteristics of carbaryl, a CYP1A1 gene inducer

Carbaryl belongs to a series of compounds that activate the CYP1A1 gene. This study demonstrates the inability of carbaryl to compete with 2,3,7,8-tetrachlorodibenzo-p-dioxin for binding to the rat aryl hydrocarbon (dioxin) receptor. Structural and physicochemical properties of this insecticide, in relation to the requirements for binding to the aryl hydrocarbon receptor, are described. The crystal structure was determined experimentally using X-ray diffraction. A conformational search using molecular mechanics was performed by means of a Monte-Carlo-type method and a stochastic dynamics simulation. Lipophilicity calculations, log P, and molecular lipophilicity potential are also presented. Common and discriminating properties of carbaryl and aryl hydrocarbon receptor ligands are discussed.     

The antimalarial activity of Ru–chloroquine complexes against resistant Plasmodium falciparum is related to lipophilicity, basicity, and heme aggregation inhibition ability near water/n-octanol interfaces

We have measured water/n-octanol partition coefficients, pK _a values, heme binding constants, and heme aggregation inhibition activity of a series of ruthenium–π-arene–chloroquine (CQ) complexes recently reported to be active against CQ-resistant strains of Plasmodium falciparum. Measurements of heme aggregation inhibition activity of the metal complexes near water/n-octanol interfaces qualitatively predict their superior antiplasmodial action against resistant parasites, in relation to CQ; we conclude that this modified method may be a better predictor of antimalarial potency than standard tests in aqueous acidic buffer. Some interesting tendencies emerge from our data, indicating that the antiplasmodial activity is related to a balance of effects associated with the lipophilicity, basicity, and structural details of the compounds studied. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Stacking and stability of RNA duplexes containing fluorobenzene and fluorobenzimidazole nucleosides

Six different fluorobenzene or fluorobenzimidazole ribonucleosides and one abasic site were incorporated in oligoribonucleotides. Individual contributions of base stacking and solvation of the modified nucleosides could be determined. In fluorobenzene.fluorobenzimidazole-modified base pairs a duplex stabilizing force was found that points to a weak F...H hydrogen bond. The lipophilicity of the unprotected nucleosides were investigated by determination of 1-octanol water partition coefficients.