Poliovirus RNA-dependent RNA polymerase (3Dpol): pre-steady-state kinetic analysis of ribonucleotide incorporation in the presence of Mg2+

We have solved the complete kinetic mechanism for correct nucleotide incorporation catalyzed by the RNA-dependent RNA polymerase from poliovirus, 3D(pol). The phosphoryl-transfer step is flanked by two isomerization steps. The first conformational change may be related to reorientation of the triphosphate moiety of the bound nucleotide, and the second conformational change may be translocation of the enzyme into position for the next round of nucleotide incorporation. The observed rate constant for nucleotide incorporation by 3D(pol) (86 s(-1)) is dictated by the rate constants for both the first conformational change (300 s(-1)) and phosphoryl transfer (520 s(-1)). Changes in the stability of the "activated" ternary complex correlate best with changes in the observed rate constant for incorporation resulting from modification of the nucleotide. With the exception of UTP, the K(d) values for nucleotides are at least 10-fold lower than the cellular concentration of the corresponding nucleotide. Our data predict that transition mutations should occur at a frequency of 1/15000, transversion mutations should occur at a frequency of less than 1/150000, and incorporation of a 2'-deoxyribonucleotide with a correct base should occur at a frequency 1/7500. Together, these data support the conclusion that 3D(pol) is actually as faithful as an exonuclease-deficient, replicative DNA polymerase. We discuss the implications of this work on the development of RNA-dependent RNA polymerase inhibitors for use as antiviral agents.     

Poliovirus RNA-dependent RNA polymerase (3Dpol): pre-steady-state kinetic analysis of ribonucleotide incorporation in the presence of Mn2+

The use of Mn(2+) as the divalent cation cofactor in polymerase-catalyzed reactions instead of Mg(2+) often diminishes the stringency of substrate selection and incorporation fidelity. We have solved the complete kinetic mechanism for single nucleotide incorporation catalyzed by the RNA-dependent RNA polymerase from poliovirus (3D(pol)) in the presence of Mn(2+). The steps employed during a single cycle of nucleotide incorporation are identical to those employed in the presence of Mg(2+) and include a conformational-change step after nucleotide binding to achieve catalytic competence of the polymerase-primer/template-nucleotide complex. In the presence of Mn(2+), the conformational-change step is the primary determinant of enzyme specificity, phosphoryl transfer appears as the sole rate-limiting step for nucleotide incorporation, and the rate of phosphoryl transfer is the same for all nucleotides: correct and incorrect. Because phosphoryl transfer is the rate-limiting step in the presence of Mn(2+), it was possible to determine that the maximal phosphorothioate effect in this system is in the range of 8-11. This information permitted further interrogation of the nucleotide-selection process in the presence of Mg(2+), highlighting the capacity of this cation to permit the enzyme to use the phosphoryl-transfer step for nucleotide selection. The inability of Mn(2+) to support a reduction in the efficiency of phosphoryl transfer when incorrect substrates are employed is the primary explanation for the loss of fidelity observed in the presence of this cofactor. We propose that the conformational change involves reorientation of the triphosphate moiety of the bound nucleotide into a conformation that permits binding of the second metal ion required for catalysis. In the presence of Mg(2+), this conformation requires interactions with the enzyme that permit a reduction in catalytic efficiency to occur during an attempt to incorporate an incorrect nucleotide. Adventitious interactions in the cofactor-binding site with bound Mn(2+) may diminish fidelity by compensating for interaction losses used to modulate catalytic efficiency when incorrect nucleotides are bound in the presence of Mg(2+).     

Poliovirus RNA-dependent RNA polymerase (3Dpol): structural, biochemical, and biological analysis of conserved structural motifs A and B

We have constructed a structural model for poliovirus RNA-dependent RNA polymerase (3D(pol)) in complex with a primer-template (sym/sub) and ATP. Residues found in conserved structural motifs A (Asp-238) and B (Asn-297) are involved in nucleotide selection. Asp-238 appears to couple binding of nucleotides with the correct sugar configuration to catalytic efficiency at the active site of the enzyme. Asn-297 is involved in selection of ribonucleoside triphosphates over 2'-dNTPs, a role mediated most likely via a hydrogen bond between the side chain of this residue and the 2'-OH of the ribonucleoside triphosphate. Substitutions at position 238 or 297 of 3D(pol) produced derivatives exhibiting a range of catalytic efficiencies when assayed in vitro for poly(rU) polymerase activity or sym/sub elongation activity. A direct correlation existed between activity on sym/sub and biological phenotypes; a 2.5-fold reduction in polymerase elongation rate produced virus with a temperature-sensitive growth phenotype. These data permit us to propose a detailed, structural model for nucleotide selection by 3D(pol), confirm the biological relevance of the sym/sub system, and provide additional evidence for kinetic coupling between RNA synthesis and subsequent steps in the virus life cycle.     

Primer-dependent synthesis by poliovirus RNA-dependent RNA polymerase (3Dpol)

Properties of poliovirus RNA-dependent RNA polymerase (3D^pol) including optimal conditions for primer extension, processivity and the rate of dissociation from primer-template (k_off) were examined in the presence and absence of viral protein 3AB. Primer-dependent polymerization was examined on templates of 407 or 1499 nt primed such that fully extended products would be 296 or 1388 nt, respectively. Maximal primer extension was achieved with low rNTP concentrations (50–100 µM) using pH 7 and low (<1 mM) MgCl₂ and KCl (<20 mM) concentrations. However, high activity (about half maximal) was also observed with 500 µM rNTPs providing that higher MgCl₂ levels (3–5 mM) were used. The enhancement observed with the former conditions appeared to result from a large increase in the initial level or active enzyme that associated with the primer. 3AB increased the number of extended primers at all conditions with no apparent change in processivity. The k_off values for the polymerase bound to primer-template were 0.011 ± 0.005 and 0.037 ± 0.006 min^–1 (average of four or more experiments ± SD) in the presence or absence of 3AB, respectively. The decrease in the presence of 3AB suggested an enhancement of polymerase binding or stability. However, binding was tight even without 3AB, consistent with the highly processive (at least several hundred nucleotides) nature of 3D^pol. The results support a mechanism whereby 3AB enhances the ability of 3D^pol to form a productive complex with the primer-template. Once formed, this complex is very stable resulting in highly processive synthesis.     

Poliovirus RNA-dependent RNA polymerase (3D(pol)). Divalent cation modulation of primer, template, and nucleotide selection

We have analyzed the divalent cation specificity of poliovirus RNA-dependent RNA polymerase, 3D(pol). The following preference was observed: Mn(2+) > Co(2+) > Ni(2+) > Fe(2+) > Mg(2+) > Ca(2+) > Cu(2+), and Zn(2+) was incapable of supporting 3D(pol)-catalyzed nucleotide incorporation. In the presence of Mn(2+), 3D(pol) activity was increased by greater than 10-fold relative to that in the presence of Mg(2+). Steady-state kinetic analysis revealed that the increased activity observed in the presence of Mn(2+) was due, primarily, to a reduction in the K(M) value for 3D(pol) binding to primer/template, without any significant effect on the K(M) value for nucleotide. The ability of 3D(pol) to catalyze RNA synthesis de novo was also stimulated approximately 10-fold by using Mn(2+), and the enzyme was now capable of also utilizing a DNA template for primer-independent RNA synthesis. Interestingly, the use of Mn(2+) as divalent cation permitted 3D(pol) activity to be monitored by following extension of 5'-(32)P-end-labeled, heteropolymeric RNA primer/templates. The kinetics of primer extension were biphasic because of the enzyme binding to primer/template in both possible orientations. When bound in the incorrect orientation, 3D(pol) was capable of efficient addition of nucleotides to the blunt-ended duplex; this activity was also apparent in the presence of Mg(2+). In the presence of Mn(2+), 3D(pol) efficiently utilized dNTPs, ddNTPs, and incorrect NTPs. On average, three incorrect nucleotides could be incorporated by 3D(pol). The ability of 3D(pol) to incorporate the correct dNTP, but not the correct ddNTP, was also observed in the presence of Mg(2+). Taken together, these results provide the first glimpse into the nucleotide specificity and fidelity of the poliovirus polymerase and suggest novel alternatives for the design of primer/templates to study the mechanism of 3D(pol)-catalyzed nucleotide incorporation.     

Assembly, purification, and pre-steady-state kinetic analysis of active RNA-dependent RNA polymerase elongation complex

NS5B is the RNA-dependent RNA polymerase responsible for replicating hepatitis C virus (HCV) genomic RNA. Despite more than a decade of work, the formation of a highly active NS5B polymerase·RNA complex suitable for mechanistic and structural studies has remained elusive. Here, we report that through a novel way of optimizing initiation conditions, we were able to generate a productive NS5B·primer·template elongation complex stalled after formation of a 9-nucleotide primer. In contrast to previous reports of very low proportions of active NS5B, we observed that under optimized conditions up to 65% of NS5B could be converted into active elongation complexes. The elongation complex was extremely stable, allowing purification away from excess nucleotide and abortive initiation products so that the purified complex was suitable for pre-steady-state kinetic analyses of polymerase activity. Single turnover kinetic studies showed that CTP is incorporated with apparent K(d) and k(pol) values of 39 ± 3 μM and 16 ± 1 s(-1), respectively, giving a specificity constant of k(pol)/K(d) of 0.41 μM(-1) s(-1). The kinetics of multiple nucleotide incorporation during processive elongation also were determined. This work establishes a novel way to generate a highly active elongation complex of the medically important NS5B polymerase for structural and functional studies.     

Factors required for the Uridylylation of the foot-and-mouth disease virus 3B1, 3B2, and 3B3 peptides by the RNA-dependent RNA polymerase (3Dpol) in vitro

The 5' terminus of picornavirus genomic RNA is covalently linked to the virus-encoded peptide 3B (VPg). Foot-and-mouth disease virus (FMDV) is unique in encoding and using 3 distinct forms of this peptide. These peptides each act as primers for RNA synthesis by the virus-encoded RNA polymerase 3D(pol). To act as the primer for positive-strand RNA synthesis, the 3B peptides have to be uridylylated to form VPgpU(pU). For certain picornaviruses, it has been shown that this reaction is achieved by the 3D(pol) in the presence of the 3CD precursor plus an internal RNA sequence termed a cis-acting replication element (cre). The FMDV cre has been identified previously to be within the 5' untranslated region, whereas all other picornavirus cre structures are within the viral coding region. The requirements for the in vitro uridylylation of each of the FMDV 3B peptides has now been determined, and the role of the FMDV cre (also known as the 3B-uridylylation site, or bus) in this reaction has been analyzed. The poly(A) tail does not act as a significant template for FMDV 3B uridylylation.     

Poliovirus RNA-dependent RNA polymerase (3D(pol)). Assembly of stable, elongation-competent complexes by using a symmetrical primer-template substrate (sym/sub)

Detailed studies of the kinetics and mechanism of nucleotide incorporation catalyzed by the RNA-dependent RNA polymerase from poliovirus, 3D(pol), have been limited by the inability to assemble elongation complexes that permit activity to be monitored by extension of end-labeled primers. We have solved this problem by employing a short, symmetrical, heteropolymeric RNA primer-template that we refer to as "sym/sub." Formation of 3D(pol)-sym/sub complexes is slow owing to a slow rate of association (0.1 microM(-1) s(-1)) of 3D(pol) and sym/sub and a slow isomerization (0. 076 s(-1)) of the 3D(pol)-sym/sub complex that is a prerequisite for catalytic competence of this complex. Complex assembly is stoichiometric under conditions in which competing reactions, such as enzyme inactivation, are eliminated. Inactivation of 3D(pol) occurs at a maximal rate of 0.051 s(-1) at 22 degrees C in reaction buffer lacking nucleotide. At this temperature, ATP protects 3D(pol) against inactivation with a K(0.5) of 37 microM. Once formed, 3D(pol)-sym/sub elongation complexes are stable (t((1)/(2)) = 2 h at 22 degrees C) and appear to contain only a single polymerase monomer. In the presence of Mg(2+), AMP, 2'-dAMP, and 3'-dAMP are incorporated into sym/sub by 3D(pol) at rates of 72, 0.6, and 1 s(-1), respectively. After incorporation of AMP, 3D(pol)-sym/sub product complexes have a half-life of 8 h at 22 degrees C. The stability of 3D(pol)-sym/sub complexes is temperature-dependent. At 30 degrees C, there is a 2-8-fold decrease in complex stability. Complex dissociation is the rate-limiting step for primer utilization. 3D(pol) dissociates from the end of template at a rate 10-fold faster than from internal positions. The sym/sub system will facilitate mechanistic analysis of 3D(pol) and permit a direct kinetic and thermodynamic comparison of the RNA-dependent RNA polymerase to the other classes of nucleic acid polymerases.     

Poliovirus RNA-dependent RNA polymerase and host cell protein synthesize product RNA twice the size of poliovirion RNA in vitro.

The poliovirus RNA-dependent RNA polymerase required an oligouridylate primer or a HeLa cell protein (host factor) to initiate RNA synthesis on poliovirion RNA in vitro. The polymerase synthesized template-sized product RNA in the oligouridylate-primed reaction. In the host factor-dependent reaction, the largest product RNA synthesized by the polymerase was twice the size of the template RNA. About half of the product RNA recovered from this reaction was shown to exist in the form of a snapback sequence. Time-course reactions and pulse-chase experiments showed that the product RNA was only slightly larger than the template RNA at early reaction times and that with time it increased in size to form the dimer-sized product RNA. Inhibition of the elongation reaction by adding only [alpha-32P]UTP and ATP resulted in the formation of template-sized product RNA. The dimer-sized product RNA was unaffected by phenol extraction or proteinase K treatment but was converted to template-sized molecules by S1 nuclease. Dimer-sized poliovirus RNA that was sensitive to S1 nuclease was also isolated from poliovirus-infected cells. The results from this study indicate that the labeled negative-strand product RNA synthesized in vitro was covalently linked to the positive-strand template RNA. Thus, in vitro, the primer-dependent poliovirus RNA polymerase may initiate RNA synthesis in the presence of the host factor by using the 3' end of the template RNA as a primer.     

Hepatitis C virus (HCV) NS5A binds RNA-dependent RNA polymerase (RdRP) NS5B and modulates RNA-dependent RNA polymerase activity.

Hepatitis C virus (HCV) NS5B is RNA-dependent RNA polymerase (RdRP), the essential catalytic enzyme for HCV replication. Recently, NS5A has been reported to be important for the establishment of HCV replication in vitro by the adaptive mutations, although its role in viral replication remains uncertain. Here we report that purified bacterial recombinant NS5A and NS5B directly interact with each other in vitro, detected by glutathione S-transferase (GST) pull-down assay. Furthermore, complex formation of these proteins transiently coexpressed in mammalian cells was detected by coprecipitation. Using terminally and internally truncated NS5A, two discontinuous regions of NS5A (amino acids 105-162 and 277-334) outside of the adaptive mutations were identified to be independently essential for the binding both in vivo and in vitro (Yamashita, T., Kaneko, S., Shirota, Y., Qin, W., Nomura, T., Kobayashi, K., and Mkyrakami, S. (1998) J. Biol. Chem. 273, 15479-15486). We previously examined the effect of His-NS5A on RdRP activity of the soluble recombinant NS5Bt in vitro (see Yamashita et al. above). Wild NS5A weakly stimulated at first (when less than 0.1 molar ratio to NS5B) and then inhibited the NS5Bt RdRP activity in a dose-dependent manner. The internal deletion mutants defective in NS5B binding exhibited no inhibitory effect, indicating that the NS5B binding is necessary for the inhibition. Taken together, our results support the idea that NS5A modulates HCV replication as a component of replication complex.     

Identification of a C-terminal regulatory motif in hepatitis C virus RNA-dependent RNA polymerase: structural and biochemical analysis

The NS5B RNA-dependent RNA polymerase encoded by the hepatitis C virus (HCV) is a key component of the viral replicase. Reported here is the three-dimensional structure of HCV NS5B polymerase, with the highlight on its C-terminal folding, determined by X-ray crystallography at 2.1-A resolution. Structural analysis revealed that a stretch of C-terminal residues of HCV NS5B inserted into the putative RNA binding cleft, where they formed a hydrophobic pocket and interacted with several important structural elements. This region was found to be conserved and unique to the RNA polymerases encoded by HCV and related viruses. Through biochemical analyses, we confirmed that this region interfered with the binding of HCV NS5B to RNA. Deletion of this fragment from HCV NS5B enhanced the RNA synthesis rate up to approximately 50-fold. These results provide not only direct experimental insights into the role of the C-terminal tail of HCV NS5B polymerase but also a working model for the RNA synthesis mechanism employed by HCV and related viruses.     

VP3, a structural protein of infectious pancreatic necrosis virus, interacts with RNA-dependent RNA polymerase VP1 and with double-stranded RNA

Infectious pancreatic necrosis virus (IPNV) is a bisegmented, double-stranded RNA (dsRNA) virus of the Birnaviridae family that causes widespread disease in salmonids. Its two genomic segments are encapsulated together with the viral RNA-dependent RNA polymerase, VP1, and the assumed internal protein, VP3, in a single-shell capsid composed of VP2. Major aspects of the molecular biology of IPNV, such as particle assembly and interference with host macromolecules, are as yet poorly understood. To understand the infection process, analysis of viral protein interactions is of crucial importance. In this study, we focus on the interaction properties of VP3, the suggested key organizer of particle assembly in birnaviruses. By applying the yeast two-hybrid system in combination with coimmunoprecipitation, VP3 was proven to bind to VP1 and to self-associate strongly. In addition, VP3 was shown to specifically bind to dsRNA in a sequence-independent manner by in vitro pull-down experiments. The binding between VP3 and VP1 was not dependent on the presence of dsRNA. Deletion analyses mapped the VP3 self-interaction domain within the 101 N-terminal amino acids and the VP1 interaction domain within the 62 C-terminal amino acids of VP3. The C-terminal end was also crucial but not sufficient for the dsRNA binding capacity of VP3. For VP1, the 90 C-terminal amino acids constituted the only dispensable part for maintaining VP3-binding ability. Kinetic analysis revealed the presence of VP1-VP3 complexes prior to the formation of mature virions in IPNV-infected CHSE-214 cells, which indicates a role in promoting the assembly process.     

The structural basis for RNA specificity and Ca2+ inhibition of an RNA-dependent RNA polymerase

The RNA-dependent RNA polymerase of bacteriophage phi6 transcribes mRNA from the three segments of the dsRNA viral genome. We have cocrystallized RNA oligonucleotides with the polymerase, revealing the mode of binding of RNA templates. This binding is somewhat different from that previously seen for DNA oligomers, leading to additional RNA-protein hydrogen bonds, consistent with a preference for RNA. Activation of the RNA/polymerase complex by the addition of substrate and Mg2+ initiates a single round of reaction within the crystal to form a dead-end complex that partially collapses within the enzyme active site. By replacing Mg2+ with Ca2+, we have been able to capture the inhibited complex which shows distortion that explains the structural basis for the inhibition of such polymerases by Ca2+.     

Mutational analysis of bovine viral diarrhea virus RNA-dependent RNA polymerase

Recombinant bovine viral diarrhea virus (BVDV) nonstructural protein 5B (NS5B) produced in insect cells has been shown to possess an RNA-dependent RNA polymerase (RdRp) activity. Our initial attempt to produce the full-length BVDV NS5B with a C-terminal hexahistidine tag in Escherichia coli failed due to the expression of insoluble products. Prompted by a recent report that removal of the C-terminal hydrophobic domain significantly improved the solubility of hepatitis C virus (HCV) NS5B, we constructed a similar deletion of 24 amino acids at the C terminus of BVDV NS5B. The resulting fusion protein, NS5BDeltaCT24-His, was purified to homogeneity and demonstrated to direct RNA replication via both primer-dependent (elongative) and primer-independent (de novo) mechanisms. Furthermore, BVDV RdRp was found to utilize a circular single-stranded DNA as a template for RNA synthesis, suggesting that synthesis does not require ends in the template. In addition to the previously described polymerase motifs A, B, C, and D, alignments with other flavivirus sequences revealed two additional motifs, one N-terminal to motif A and one C-terminal to motif D. Extensive alanine substitutions showed that while most mutations had similar effects on both elongative and de novo RNA syntheses, some had selective effects. Finally, deletions of up to 90 amino acids from the N terminus did not significantly affect RdRp activities, whereas deletions of more than 24 amino acids at the C terminus resulted in either insoluble products or soluble proteins (DeltaCT179 and DeltaCT218) that lacked RdRp activities.     

Specificity and mechanism analysis of hepatitis C virus RNA-dependent RNA polymerase

The RNA-dependent RNA polymerase encoded by the hepatitis C virus (HCV) NS5B gene has been expressed as a nonfusion protein in bacterial cells and purified to homogeneity using sequential chromatographic columns. The purified NS5B protein exhibited RNA-dependent RNA polymerase activity using poly(A) template and the K(m) and V(max) were determined as 8.4 microM and 1976 pmol/mg-min, respectively. This full-length NS5B protein exhibited much stronger binding affinity toward the 30-mer poly(G) than other homopolymeric RNAs of the same size. For the first time, we demonstrate that the HCV NS5B was able to bind various ribonucleotides. Using a panel of oligonucleotides varying in length, we studied the NS5B catalytic efficiency and proposed the size of the NS5B active site to be 8-10 nucleotides. The multifunctional nature of NS5B protein is also discussed and compared with other viral RNA polymerases.     

Structure-function analysis of mutant RNA-dependent RNA polymerase complexes with VPg

The replication of the foot-and-mouth disease virus (FMDV) genome is critically dependent upon the activity of a virally encoded RNA-dependent RNA polymerase (RdRp). In this study, four mutant RdRps of FMDV were isolated from viral quasi-species treated with ribavirin, of which two were single mutants (L123F and T381A) and two were double mutants (T291I/T381I and L123F/F244L). The mutant proteins were expressed in Escherichia coli and purified by His-bind resin chromatography. In combination with real-time RT-PCR, an in vitro RNA replication system that uses genome RNA/VPg as template-primers was used to determine polymerase activity. Mutant L123F exhibited a 0.6-fold decrease (p < 0.001) in polymerase activity relative to wild-type RdRp, whereas the activity of L123F/F244L and T381A was undetectable. Surprisingly, the activity of T291I/T381I yielded a 0.7-fold increase (p < 0.001) as compared to wild-type. In order to study the structure-function relationship of RdRp, all structures of the RdRp-RNA template-primer complex were obtained through homology modeling and molecular docking. The VPg1 orientation in the RdRp-VPg1 complexes was determined and analyzed with mathematical methods. Our results reveal that the orientation of VPg after binding to the polymerase determines the FMDV RdRp catalytic activity, which provides a basis for the rational design of novel antiviral agents.