Label‐free indicator‐free nucleic acid biosensors using carbon nanotubes

Carbon nanotubes (CNTs) are promising components for electrical biosensors due to their high surface‐to‐volume ratio and improved electron transfer properties. This review surveys CNT‐based label‐free indicator‐free biosensing strategies that have been demonstrated for the sensitive detection of nucleic acids. After an introduction to CNTs, the fabrication of biosensors and techniques for the immobilization of probe nucleic acids are outlined. Subsequently, two major label‐free strategies namely electrochemical transduction and field‐effect detection are presented. The focus is on direct detection methods that avoid labels, indicators, intercalating agents, mediators, and even secondary receptors. The review concludes with a comparison between the various biosensors and presents ways of engineering them so that they can be deployed in realistic diagnostic applications.     

Gel‐free species identification using melt‐curve analysis

DNA‐based identification of organisms is an important tool in biosecurity, ecological monitoring and wildlife forensics. Current methods usually involve post‐polymerase chain reaction (PCR) manipulations (e.g. restriction digest, gel electrophoresis), which add to the expense and time required for processing samples, and may introduce error. We developed a method of species identification that uses species‐specific primers and melt‐curve analysis, and avoids post‐PCR manipulation of samples. The method was highly accurate when trialled on DNA from six large carnivore species from Tasmania, Australia. Because of its flexibility and cost‐effectiveness, this method should find wide use in many areas of applied biological science.     

Genotyping‐free parentage assignment using RAD‐seq reads

Parentage assignment is defined as the identification of the true parents of one focal offspring among a list of candidates and has been commonly used in zoological, ecological, and agricultural studies. Although likelihood‐based parentage assignment is the preferred method in most cases, it requires genotyping a predefined set of DNA markers and providing their population allele frequencies. In the present study, we proposed an alternative method of parentage assignment that does not depend on genotype data and prior information of allele frequencies. Our method employs the restriction site‐associated DNA sequencing (RAD‐seq) reads for clustering into the overlapped RAD loci among the compared individuals, following which the likelihood ratio of parentage assignment could be directly calculated using two parameters—the genome heterozygosity and error rate of sequencing reads. This method was validated on one simulated and two real data sets with the accurate assignment of true parents to focal offspring. However, our method could not provide a statistical confidence to conclude that the first ranked candidate is a true parent.     

Label‐free and non‐invasive monitoring of porcine trophoblast derived cells: differentiation in serum and serum‐free media

Traditional approaches to characterize stem cell differentiation are time‐consuming, lengthy and invasive. Here, Raman microspectroscopy (RM) and atomic force microscopy (AFM) – both considered as non‐invasive techniques – are applied to detect the biochemical and biophysical properties of trophoblast derived stem‐like cells incubated up to 10 days under conditions designed to induce differentiation. Significant biochemical and biophysical differences between control cells and differentiated cells were observed. Quantitative real time PCR was also applied to analyze gene expression. The relationship between cell differentiation and associated cellular biochemical and biomechanical changes were discussed.

Monitoring trophoblast cells differentiation     

Oxyma‐based phosphates for racemization‐free peptide segment couplings

Glyceroacetonide–Oxyma [(2,2‐dimethyl‐1,3‐dioxolan‐4‐yl)methyl 2‐cyano‐2‐(hydroxyimino)acetate ( 1 )] displayed remarkable physico‐chemical properties as an additive for peptide‐forming reactions. Although racemization‐free amide‐forming reactions have been established for N‐urethane‐protected α‐amino acids with EDCI, 1 , and NaHCO₃ in water or DMF‐water media, amide‐forming reactions of N‐acyl‐protected α‐amino acids and segment couplings of oligopeptides still require further development. Diethylphosphoryl–glyceroacetonide–oxyma (DPGOx 3 ) exhibits relative stability in aprotic solvents and is an effective coupling reagent for N‐acyl‐protected α‐amino acids and oligo peptide segments. The conditions reported here is also effective in lactam‐forming reactions. Unlike most of the reported coupling reagents, simple aqueous work‐up procedures can remove the reagents and by‐products generated in the reactions. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Universal label‐free in‐process quantification of influenza virus‐like particles

Virus‐like particles (VLPs) are becoming established as vaccines, in particular for influenza pandemics, increasing the interest in the development of VLPs manufacturing bioprocess. However, for complex VLPs, the analytical tools used for quantification are not yet able to keep up with the bioprocess progress. Currently, quantification for Influenza relies on traditional methods: hemagglutination assay or Single Radial Immunodiffusion. These analytical technologies are time‐consuming, cumbersome, and not supportive of efficient downstream process development and monitoring. Hereby we report a label‐free tool that uses Biolayer interferometry (BLI) technology applied on an Octet platform to quantify Influenza VLPs at all stages of bioprocess. Human (α2,6‐linked sialic acid) and avian (α2,3‐linked sialic acid) biotinylated receptors associated with streptavidin biosensors were used, to quantify hemagglutinin content in several mono‐ and multivalent Influenza VLPs. The applied method was able to quantify hemagglutinin from crude samples up to final bioprocessing VLP product. BLI technology confirmed its value as a high throughput analytical tool with high sensitivity and improved detection limits compared to traditional methods. This simple and fast method allowed for real‐time results, which are crucial for in‐line monitoring of downstream processing, improving process development, control and optimization.     

Taxonomy‐free molecular diatom index for high‐throughput eDNA biomonitoring

Current biodiversity assessment and biomonitoring are largely based on the morphological identification of selected bioindicator taxa. Recently, several attempts have been made to use eDNA metabarcoding as an alternative tool. However, until now, most applied metabarcoding studies have been based on the taxonomic assignment of sequences that provides reference to morphospecies ecology. Usually, only a small portion of metabarcoding data can be used due to a limited reference database and a lack of phylogenetic resolution. Here, we investigate the possibility to overcome these limitations using a taxonomy‐free approach that allows the computing of a molecular index directly from eDNA data without any reference to morphotaxonomy. As a case study, we use the benthic diatoms index, commonly used for monitoring the biological quality of rivers and streams. We analysed 87 epilithic samples from Swiss rivers, the ecological status of which was established based on the microscopic identification of diatom species. We compared the diatom index derived from eDNA data obtained with or without taxonomic assignment. Our taxonomy‐free approach yields promising results by providing a correct assessment for 77% of examined sites. The main advantage of this method is that almost 95% of OTUs could be used for index calculation, compared to 35% in the case of the taxonomic assignment approach. Its main limitations are under‐sampling and the need to calibrate the index based on the microscopic assessment of diatoms communities. However, once calibrated, the taxonomy‐free molecular index can be easily standardized and applied in routine biomonitoring, as a complementary tool allowing fast and cost‐effective assessment of the biological quality of watercourses.     

Plasmid‐free T7‐based Escherichia coli expression systems

In order to release host cells from plasmid‐mediated increases in metabolic load and high gene dosages, we developed a plasmid‐free, T7‐based E. coli expression system in which the target gene is site‐specifically integrated into the genome of the host. With this system, plasmid‐loss, a source of instability for conventional expression systems, was eliminated. At the same time, system leakiness, a challenging problem with recombinant systems, was minimized. The efficiency of the T7 RNA polymerase compensates for low gene dosage and provides high rates of recombinant gene expression without fatal consequences to host metabolism. Relative to conventional pET systems, this system permits improved process stability and increases the host cell's capacity for recombinant gene expression, resulting in higher product yields. The stability of the plasmid‐free system was proven in chemostat cultivation for 40 generations in a non‐induced and for 10 generations in a fully induced state. For this reason plasmid‐free systems benefit the development of continuous production processes with E. coli. However, time and effort of the more complex cloning procedure have to be considered in relation to the advantages of plasmid‐free systems in upstream‐processing. Biotechnol. Bioeng. 2010. 105: 786–794. © 2009 Wiley Periodicals, Inc.     

Nonlinear‐optical stain‐free stereoimaging of astrocytes and gliovascular interfaces

Methods of nonlinear optics provide a vast arsenal of tools for label‐free brain imaging, offering a unique combination of chemical specificity, the ability to detect fine morphological features, and an unprecedentedly high, subdiffraction spatial resolution. While these techniques provide a rapidly growing platform for the microscopy of neurons and fine intraneural structures, optical imaging of astroglia still largely relies on filament‐protein‐antibody staining, subject to limitations and difficulties especially severe in live‐brain studies. Once viewed as an ancillary, inert brain scaffold, astroglia are being promoted, as a part of an ongoing paradigm shift in neurosciences, into the role of a key active agent of intercellular communication and information processing, playing a significant role in brain functioning under normal and pathological conditions. Here, we show that methods of nonlinear optics provide a unique resource to address long‐standing challenges in label‐free astroglia imaging. We demonstrate that, with a suitable beam‐focusing geometry and careful driver‐pulse compression, microscopy of second‐harmonic generation (SHG) can enable a high‐resolution label‐free imaging of fibrillar structures of astrocytes, most notably astrocyte processes and their endfeet. SHG microscopy of astrocytes is integrated in our approach with nonlinear‐optical imaging of red blood cells based on third‐harmonic generation (THG) enhanced by a three‐photon resonance with the Soret band of hemoglobin. With astroglia and red blood cells providing two physically distinct imaging contrasts in SHG and THG channels, a parallel detection of the second and third harmonics enables a high‐contrast, high‐resolution, stain‐free stereoimaging of gliovascular interfaces in the central nervous system. Transverse scans of the second and third harmonics are shown to resolve an ultrafine texture of blood‐vessel walls and astrocyte‐process endfeet on gliovascular interfaces with a spatial resolution within 1 μm at focusing depths up to 20 μm inside a brain.     

Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes

The capability to print three‐dimensional (3D) cellular tubes is not only a logical first step towards successful organ printing but also a critical indicator of the feasibility of the envisioned organ printing technology. A platform‐assisted 3D inkjet bioprinting system has been proposed to fabricate 3D complex constructs such as zigzag tubes. Fibroblast (3T3 cell)‐based tubes with an overhang structure have been successfully fabricated using the proposed bioprinting system. The post‐printing 3T3 cell viability of printed cellular tubes has been found above 82% (or 93% with the control effect considered) even after a 72‐h incubation period using the identified printing conditions for good droplet formation, indicating the promising application of the proposed bioprinting system. Particularly, it is proved that the tubular overhang structure can be scaffold‐free fabricated using inkjetting, and the maximum achievable height depends on the inclination angle of the overhang structure. As a proof‐of‐concept study, the resulting fabrication knowledge helps print tissue‐engineered blood vessels with complex geometry. Biotechnol. Bioeng. 2012; 109: 3152–3160. © 2012 Wiley Periodicals, Inc.     

Production of G protein‐coupled receptors in an insect‐based cell‐free system

The biochemical analysis of human cell membrane proteins remains a challenging task due to the difficulties in producing sufficient quantities of functional protein. G protein‐coupled receptors (GPCRs) represent a main class of membrane proteins and drug targets, which are responsible for a huge number of signaling processes regulating various physiological functions in living cells. To circumvent the current bottlenecks in GPCR studies, we propose the synthesis of GPCRs in eukaryotic cell‐free systems based on extracts generated from insect (Sf21) cells. Insect cell lysates harbor the fully active translational and translocational machinery allowing posttranslational modifications, such as glycosylation and phosphorylation of de novo synthesized proteins. Here, we demonstrate the production of several GPCRs in a eukaryotic cell‐free system, performed within a short time and in a cost‐effective manner. We were able to synthesize a variety of GPCRs ranging from 40 to 133 kDa in an insect‐based cell‐free system. Moreover, we have chosen the μ opioid receptor (MOR) as a model protein to analyze the ligand binding affinities of cell‐free synthesized MOR in comparison to MOR expressed in a human cell line by “one‐point” radioligand binding experiments. Biotechnol. Bioeng. 2017;114: 2328–2338. © 2017 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc.     

Homochiral bifunctional L‐prolinamide‐ and L‐bis‐prolinamide‐catalyzed asymmetric aldol reactions performed in wet solvent‐free conditions

In this study, the novel bifunctional homochiral thiourea‐L‐prolinamides 1–4 , tertiary amino‐L‐prolinamide 5 , and bis‐L‐prolinamides 6 and 7 were prepared from enantiomerically pure (11R,12R)‐11,12‐diamino‐9,10‐dihydro‐9,10‐ethanoanthracene 8 and (11S,12S)‐11,12‐diamino‐9,10‐dihydro‐9,10‐ethanoanthracene ent‐8 . Highly enantioselective and diastereoselective aldolic intermolecular reactions (up to 95% enantiomeric excess, 93:7 anti/syn) between aliphatic ketones (20 equiv) and a range of aromatic aldehydes (1 equiv) were successfully carried out in the presence of water (10 equiv) and monochloroacetic acid (10 mol%), solvent‐free conditions, at room temperature over 24 h using organocatalysts 1–7 (5 mol%). Stereoselective induction using density functional theory–based methods was consistent with the experimental data.     

Critical assessment of proteome‐wide label‐free absolute abundance estimation strategies

There is a great interest in reliable ways to obtain absolute protein abundances at a proteome‐wide scale. To this end, label‐free LC‐MS/MS quantification methods have been proposed where all identified proteins are assigned an estimated abundance. Several variants of this quantification approach have been presented, based on either the number of spectral counts per protein or MS1 peak intensities. Equipped with several datasets representing real biological environments, containing a high number of accurately quantified reference proteins, we evaluate five popular low‐cost and easily implemented quantification methods (Absolute Protein Expression, Exponentially Modified Protein Abundance Index, Intensity‐Based Absolute Quantification Index, Top3, and MeanInt). Our results demonstrate considerably improved abundance estimates upon implementing accurately quantified reference proteins; that is, using spiked in stable isotope labeled standard peptides or a standard protein mix, to generate a properly calibrated quantification model. We show that only the Top3 method is directly proportional to protein abundance over the full quantification range and is the preferred method in the absence of reference protein measurements. Additionally, we demonstrate that spectral count based quantification methods are associated with higher errors than MS1 peak intensity based methods. Furthermore, we investigate the impact of miscleaved, modified, and shared peptides as well as protein size and the number of employed reference proteins on quantification accuracy.     

Label‐free spectroscopic tissue characterization using fluorescence excitation‐scanning spectral imaging

Spectral imaging approaches provide new possibilities for measuring and discriminating fluorescent molecules in living cells and tissues. These approaches often employ tunable filters and robust image processing algorithms to identify many fluorescent labels in a single image set. Here, we present results from a novel spectral imaging technology that scans the fluorescence excitation spectrum, demonstrating that excitation‐scanning hyperspectral image data can discriminate among tissue types and estimate the molecular composition of tissues. This approach allows fast, accurate quantification of many fluorescent species from multivariate image data without the need of exogenous labels or dyes. We evaluated the ability of the excitation‐scanning approach to identify endogenous fluorescence signatures in multiple unlabeled tissue types. Signatures were screened using multi‐pass principal component analysis. Endmember extraction techniques revealed conserved autofluorescent signatures across multiple tissue types. We further examined the ability to detect known molecular signatures by constructing spectral libraries of common endogenous fluorophores and applying multiple spectral analysis techniques on test images from lung, liver and kidney. Spectral deconvolution revealed structure‐specific morphologic contrast generated from pure molecule signatures. These results demonstrate that excitation‐scanning spectral imaging, coupled with spectral imaging processing techniques, provides an approach for discriminating among tissue types and assessing the molecular composition of tissues. Additionally, excitation scanning offers the ability to rapidly screen molecular markers across a range of tissues without using fluorescent labels. This approach lays the groundwork for translation of excitation‐scanning technologies to clinical imaging platforms.     

Label‐free in vivo cellular‐level detection and imaging of apoptosis

Cell death plays a critical role in health and homeostasis as well as in the pathogenesis and treatment of a broad spectrum of diseases and can be broadly divided into two main categories: apoptosis, or programmed cell death, and necrosis, or acute cell death. While these processes have been characterized extensively in vitro, label‐free detection of apoptosis and necrosis at the cellular level in vivo has yet to be shown. In this study, for the first time, fluorescence lifetime imaging microscopy (FLIM) of intracellular reduced nicotinamide adenine dinucleotide (NADH) was utilized to assess the metabolic response of in vivo mouse epidermal keratinocytes following induction of apoptosis and necrosis. Results show significantly elevated levels of both the mean lifetime of NADH and the intracellular ratio of protein bound‐to‐free NADH in the apoptotic compared to the necrotic tissue. In addition, the longitudinal profiles of these two cell death processes show remarkable differences. By identifying and extracting these temporal metabolic signatures, apoptosis in single cells can be studied in native tissue environments within the living organism.