| Abstract: | Frog skeletal muscle fibers, mechanically skinned under water-saturated silicone oil, swell upon transfer to aqueous relaxing medium (60 mM KCl; 3 mM MgCl2; 3 mM ATP; 4 mM EGTA; 20 mM Tris maleate; pH = 7.0; ionic strength 0.15 M). Their cross-sectional areas, estimated with an elliptical approximation, increase 2.32-fold (±0.54 SD). Sarcomere spacing is unaffected by this swelling. Addition of 200 mM sucrose to relaxing medium had no effect on fiber dimensions, whereas decreasing pH to 5.0 caused fibers to shrink nearly to their original (oil) size. Decreasing MgCl2 to 0.3 mM caused fibers to swell 10%, and increasing MgCl2 to 9 mM led to an 8% shrinkage. Increasing ionic strength to 0.29 M with KCl caused a 26% increase in cross-sectional area; decreasing ionic strength to 0.09 M had no effect. Swelling pressure was estimated with long-chain polymers, which are probably excluded from the myofilament lattice. Shrinkage in dextran T10 (number average mol wt 6,200) was transient, indicating that this polymer may penetrate into the fibers. Shrinkage in dextran T40 (number average mol wt 28,000), polyvinylpyrrolidone (PVP) K30 (number average mol wt 40,000) and dextran T70 (number average mol wt 40,300) was not transient, indicating exclusion. Maximal calcium-activated tension is decreased by 21% in PVP solutions and by 31% in dextran T40 solutions. Fibers were shrunk to their original size with 8 × 10-2 g/cm3 PVP K30, a concentration which, from osmometric data, corresponds to an osmotic pressure (II/RT) of 10.5 mM. As discussed in the text, we consider this our best estimate of the swelling pressure. We find that increasing ionic strength to 0.39 M with KCl decreases swelling pressure slightly, whereas decreasing ionic strength to 0.09 M has no effect. We feel these data are consistent with the idea that swelling arises from the negatively charged nature of the myofilaments, from either mutual filamentary repulsion or a Donnan-osmotic mechanism. |
