首页 | 本学科首页   官方微博 | 高级检索  
   检索      


Conceptual design and implantation of an external fixator with improved mobility for knee rehabilitation
Authors:Gianluca Gatti
Institution:Department of Mechanical, Energy and Management Engineering, University of Calabria, Arcavacata di Rende (CS), Italy
Abstract:A hinged external fixator is used to allow early knee rehabilitation in case of injury or trauma, as an alternative approach to immobilization. It is mainly adopted for the treatment of dislocations, which involve tearing of the ligaments, and it basically consists of two links connected to each other by a revolute joint. Each link is fixed to the femur and tibia via pin fixation, and the revolute joint is approximately aligned to the knee flexion-extension (FE) axis. The advantage in its implantation is to protect ligament reconstruction, while allowing for an aggressive rehabilitation. Traditional fixators only accommodate the functional flexion movement in a limited range, i.e. where the anatomical movement is closer to a planar circular trajectory. This paper presents the conceptual design and implantation procedure of a double-axis fixator, which accommodates both FE and longitudinal internal-external rotation. The procedure is based on accurate knee kinematics measurements and on computer-aided multibody simulations to assist clinicians in the implantation. An experimental test is presented using an artificial knee, and guidelines are given for in vitro studies. The proposed technique may allow for a better understanding of knee kinematics and have the potential advantage to increase the range of motion in postoperative rehabilitation.
Keywords:Hinged external fixator  passive knee  axes of rotation of the knee  instrumented spatial linkage
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号