内循环颗粒污泥床硝化反应器临界曝气强度的研究

内循环颗粒污泥床硝化反应器是一种新型高效硝化反应器 ,在反应器运行过程中 ,液体循环临界曝气强度和颗粒污泥流化临界曝气强度是两个重要操作参数。建立了升流区表观液速Ulr与曝气强度Ugr之间的关系 ,并测定了有关的模型参数 ,得到了具体的数学表达式 :U_lr=(2.613-0.024 )U^0.871_gr 0.276U^0.871_gr-0.28。根据该模型 ,计算得到的液体循环临界曝气强度为1.017cm/min ,颗粒污泥流化临界曝气强度为 2.662cm/min。实测结果证明 ,求得的两个临界曝气强度具有较高的准确性 ,能够用于指导内循环颗粒污泥床硝化反应器的操作优化.

Research on Critical Aerating Flux of Internal-loop Granular Sludge Bed Nitrifying Reactor

The internal loop granular sludge bed nitrifying reactor is a new type of aerobic nitrifying equipment and has taken on a good potential for nitrification. The critical aerating flux for liquid loop and critical aerating flux for fluidization of granular sludge are two important parameters for its operation. The relationship between liquid superficial velocity in riser ( U lr ) and aerating flux( U gr ) was studied, the model parameters were measured by experiment, and the relational expression was established. According to the model, the critical aerating flux for liquid loop and the critical aerating flux for fluidization of granular sludge were calculated as 1 017cm/min and 2 662cm/min, respectively. The experimental data from reactor operation showed that the two calculated critical aerating fluxes near the practical values. So they could be used to direct the design and operating optimization for the internal loop granular sludge bed nitrifying reactor.