Immobilization of laccase from the white rot fungus Coriolopsis polyzona and use of the immobilized biocatalyst for the continuous elimination of endocrine disrupting chemicals

Laccase from the white rot fungus strain Coriolopsis polyzona was immobilized covalently on the diatomaceous earth support Celite^® R-633 using different strategies. A first methodology involved the sequential activation of the support surface with γ-aminopropyltriethoxysilane followed by the reaction of the functionalized surface with glutaraldehyde (GLU) or glyoxal (GLY) and the immobilization of laccase on the activated surface. Another strategy tested the simultaneous internal cross-linking of the protein with GLU or GLY and the immobilization of the laccase on the silanized surface. Finally, these two strategies were modified to test the impact of the concomitant addition of bovine serum albumin (BSA) as a stabilizing agent during the immobilization steps. The highest laccase activity and the greatest degree of activity recovery (tested using 2,2′-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) as the substrate) were achieved by the sequential immobilization procedure using GLU as the cross-linking agent. The solid catalysts featuring internal cross-linking of the protein showed significantly higher stability against several denaturants. The Michaelis–Menten kinetic parameters with respect to ABTS revealed a higher affinity for this substrate in the case of the sequential procedure compared to the simultaneous approach. The biocatalyst formed using GLU in the sequential procedure was applied in a packed bed reactor for the continuous treatment of 5 mg l⁻¹ solutions of the endocrine disrupting chemicals (EDCs) nonylphenol (NP), bisphenol A (BPA) and triclosan (TCS) through repeated batch treatments. All of these EDCs could be eliminated at a contact time of less than 200 min by using, respectively, 3.75 units (U) of laccase activity for BPA and TCS and 1.88 U for NP. These performances of elimination were maintained over five consecutive treatment cycles using the same biocatalyst. This system could also remove these EDCs from 100 mg l⁻¹ solutions. The Michaelis–Menten kinetic parameters with respect to these chemicals showed a decreasing affinity of the solid biocatalyst for NP, TCS and BPA in that order.