The luminescence properties of Sr2–1.5x−1.5yP2O7:xDy3+,yCe3+ phosphor for near‐UV‐based white LEDs synthesized by a chemical co‐precipitation method

A series of Sr₂P₂O₇:Dy³⁺, Sr₂P₂O₇:Ce³⁺ and Sr₂P₂O₇:Dy³⁺,Ce³⁺ phosphors was synthesized via the one‐step calcination process for the precursors prepared by co‐precipitation methods. The phases, morphology, quantum efficiency and photoluminescence properties of the obtained phosphors were characterized systematically. These results show that the near‐spherical particles prepared through calcining the precursors by means of ammonium dibasic phosphate co‐precipitation (method 3) have the smallest particle size and strongest emission intensity among the three methods in the paper. With Dy³⁺ concentration increasing in Sr₂P₂O₇:Dy³⁺ phosphors, the luminescence intensity first increases, reaches maximum, and then decreases. A similar trend was followed by Sr₂P₂O₇:Ce³⁺ with Ce³⁺concentration increasing. A successful attempt was made to initiate the energy transfer mechanism from Ce³⁺ to Dy³⁺ in the host lattice and an overlap between the emission band of Ce³⁺ and the excitation band of Dy³⁺ indicated that the Ce³⁺ → Dy³⁺ energy transfer may indeed exist. It is clear that the photoluminescence intensity of Dy³⁺ as well as the quantum efficiency of the phosphor can be enhanced markedly by co‐doping Ce³⁺. Sr₂P₂O₇:Dy³⁺,Ce³⁺ has its (CIE) chromaticity coordinates in the bluish‐white‐light region, near the standard illuminant D₆₅. The CIE 1913 chromaticity coordinates of Sr₂P₂O₇:Dy³⁺ phosphors fall in the white‐light region, and are adjacent to the ideal white‐light coordinates. In addition, the colour temperature and colour tone of Sr₂P₂O₇:Dy³⁺ could be adjusted by changing the relative concentration of Dy³⁺. In short, Sr₂P₂O₇:Dy³⁺ can be a promising single‐phased white‐light emitting phosphor for near‐UV (NUV) w‐LEDs.