Gram-scale purification of eicosapentaenoic acid (EPA, 20:5n-3) from wetPhaeodactylum tricornutum UTEX 640 biomass

Eicosapentaenoic acid (EPA, 20:5n-3) was obtained from the microalgaPhaeodactylum tricornutum following a three-step process: fatty acid extraction by direct saponification of wet biomass, polyunsaturated fatty acid (PUFA) concentration by formation of urea inclusion compounds and EPA isolation by preparative HPLC. Direct saponification of wet biomass was carried out with KOH-ethanol (96% v:v) (1 h, 60 °C), extracting 91% of the EPA. PUFAs were concentrated by the urea method with an urea/fatty acid ratio of 4:1 at a crystallization temperature of 28 °C using methanol as the urea solvent. An EPA concentration ratio of 1.5 (55.2/36.3) and recovery of 79% were obtained. This PUFA concentrate was used to obtain 95.8% pure EPA by preparative HPLC, using a reverse-phase column (C₁₈, 4.7 cm i.d. × 30 cm) and methanol-water (1% AcH) 80:20 w/w as the mobile phase. Ninety-seven per cent of EPA loaded was recovered and 70% EPA present in theP. tricornutum biomass was recovered in a highly pure form by means of this three-step downstream processing. In each of the HPLC preparative runs, 635 mg PUFA concentrate were loaded, obtaining 326 mg of a highly concentrated EPA fraction (2.46 g d^–1). Finally, a preliminary cost statement has been calculated.