Biomass axial distribution in airlift bioreactor with yeast and plant cells

This study was aimed at determining the degree of biomass homogeneity in the various parts of an internal loop airlift bioreactor, thus verifying the assumption, often made in bioreactor studies, of a well-mixed liquid-biomass system. Following characterization of the hydrodynamics of the vessel with water, the axial biomass distribution in the riser and downcomer was determined for plant and yeast cell suspensions of 5.8, 8.5, and 12.5 g DW/L Phaseolus vulgaris and of 30 and 46 g DW/L Saccharomyces cerevisiae. The airlift bioreactor with a surface ratio A(D)/A(D) of 1.04 and aspect ratio of 4.95 was investigated under various aeration rates. The yeast cells were found to be distributed practically uniformly throughout the vessel at the aeration rates of 0.1-1.45 vvm. However, in the case of the denser and cluster-forming plant cells, a clear trend of a gradual bio-mass accumulation in the downcomer, a slightly lower but uniform biomass loading in the riser, and a slightly higher biomass concentration in the gas-liquid separator was observed at the lower aeration rates of 0.1-0.61 vvm. In the case of powderized calcium carbonate (55g/L) often used in fermentations of organic acids, a slight trend of a gradual accumulation of solids towards the bottom parts in both the downcomer and riser was observed. A better representative sampling location, in terms of solids and biomass loading, seems to be in the middle part of the vessel. It is suggested that airlift bioreactors with higher aspect ratios (>5) may be prone to a more significant inhomogeneity of solids (biomass and particles).