Two star‐shaped tetranuclear Ru(II) complexes containing uncoordinated imidazole groups: synthesis,characterization, photophysical and pH sensing properties

Tetrapodal ligands H₄L¹ and H₄L² containing imidazole groups have been synthesized by the reaction of 1,10‐phenanthroline‐5,6‐dione with 1,2,4,5‐tetrakis[(4‐formylphenoxy)methyl]benzene and 1,2,4,5‐tetrakis[(3‐formylphenoxy)methyl]benzene, respectively, in presence of NH₄OAc. Two star‐shaped complexes [{Ru(bpy)₂}₄(μ₄‐H₄L¹)](PF₆)₈ and [{Ru(bpy)₂}₄(μ₄‐H₄L²)](PF₆)₈ (bpy = 2,2′‐bipyridine) have been prepared by refluxing Ru(bpy)₂Cl₂·2H₂O and each ligand in ethylene glycol. The deprotonated complexes [{Ru(bpy)₂}₄(μ₄‐L¹)](PF₆)₄ and [{Ru(bpy)₂}₄(μ₄‐L²)](PF₆)₄ have been obtained by the reaction of sodium methoxide with [{Ru(bpy)₂}₄(μ₄‐H₄L¹)](PF₆)₈ and [{Ru(bpy)₂}₄(μ₄‐H₄L²)](PF₆)₈, respectively, in methanol. The pH effects on the UV–vis light absorption and emission spectra of both complexes have been studied, and ground‐ and excited‐state ionization constants of both complexes have been derived. The photophysical properties of both complexes are strongly dependent on the solution pH. They act as proton‐induced off–on–off luminescent sensors through two successive deprotonation processes of imidazole groups, with a maximum on–off ratio of 8 in buffer solution at room temperature. Theoretical calculations for the highest occupied molecular orbital (HOMO) and lowest occupied molecular orbital (LOMO) orbitals of bridging ligand are also presented for plausible explanations of the fluorescence changes. Copyright © 2015 John Wiley & Sons, Ltd.     

Size‐Dependent Charge Transfer in Blends of PbS Quantum Dots with a Low‐Gap Silicon‐Bridged Copolymer

The photophysics of bulk heterojunctions of a high‐performance, low‐gap silicon‐bridged dithiophene polymer with oleic acid capped PbS quantum dots (QDs) are studied to assess the material potential for light harvesting in the visible‐ and IR‐light ranges. By employing a wide range of nanocrystal sizes, systematic dependences of electron and hole transfer on quantum‐dot size are established for the first time on a low‐gap polymer–dot system. The studied system exhibits type II band offsets for dot sizes up to ca. 4 nm, whch allow fast hole transfer from the quantum dots to the polymer that competes favorably with the intrinsic QD recombination. Electron transfer from the polymer is also observed although it is less competitive with the fast polymer exciton recombination for most QD sizes studied. The incorporation of a fullerene derivative provides efficient electron‐quenching sites that improve interfacial polymer‐exciton dissociation in ternary polymer–fullerene–QD blends. The study indicates that programmable band offsets that allow both electron and hole extraction can be produced for efficient light harvesting based on this low‐gap polymer‐PbS QD composite.     

Favorable Mixing Thermodynamics in Ternary Polymer Blends for Realizing High Efficiency Plastic Solar Cells

Ternary blends with broad spectral absorption have the potential to increase charge generation in organic solar cells but feature additional complexity due to limited intermixing and electronic mismatch. Here, a model system comprising the polymers poly[5,5‐bis(2‐butyloctyl)‐(2,2‐bithiophene)‐4,4‐dicarboxylate‐alt‐5,5‐2,2‐bithiophene] (PDCBT) and PTB7‐Th and PC₇₀BM as an electron accepting unit is presented. The power conversion efficiency (PCE) of the ternary system clearly surpasses the performance of either of the binary systems. The photophysics is governed by a fast energy transfer process from PDCBT to PTB7‐Th, followed by electron transfer at the PTB7‐Th:fullerene interface. The morphological motif in the ternary blend is characterized by polymer fibers. Based on a combination of photophysical analysis, GIWAXS measurements and calculation of the intermolecular parameter, the latter indicating a very favorable molecular affinity between PDCBT and PTB7‐Th, it is proposed that an efficient charge generation mechanism is possible because PTB7‐Th predominantly orients around PDCBT filaments, allowing energy to be effectively relayed from PDCBT to PTB7‐Th. Fullerene can be replaced by a nonfullerene acceptor without sacrifices in charge generation, achieving a PCE above 11%. These results support the idea that thermodynamic mixing and energetics of the polymer–polymer interface are critical design parameter for realizing highly efficient ternary solar cells with variable electron acceptors.     

Photophysical and photodynamic properties of Pyronin Y in micellar media at different temperatures

In this study, photophysics and photodynamical properties of Pyronin Y (PyY) in different liquid media were investigated. Interactions of PyY, which is a positively charged pigment compound pertaining to the xanthene derivatives with surfactants possessing distinct charges, were determined by using the molecular absorption and fluorescence spectroscopy techniques. It was observed that band intensities of absorption and fluorescence spectra belonging to PyY increase in proportion to the water when compared to three micelle systems, cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and Triton X‐100 (TX‐100). This suggests that interactions in micelle systems are different from those in deionized water, and solvation and surface interactions modify. It is determined that the strongest interaction occurs between PyY dye and SDS, anionic surfactant, and this interaction arises from the electrostatic forces. Calculated photophysical parameters indicated that the microenvironment of PyY in SDS micelle is different to that of other systems. In temperature studies, it was reported that increasing the temperature of the samples increased non‐radiative transitions. Steady‐state fluorescence anisotropy values were calculated by using fluorescence intensities of PyY compound in pre‐micellar, micellar and post‐micellar systems. Once the PyY fluorescence probe is added to the surfactant containing solutions below the critical micelle concentrations, the measured anisotropy values were found to be low because the probe remains in the deionized water phase. When the surfactant concentration of the medium becomes closer to the critical micelle concentrations, the steady‐state anisotropy value prominently increases. This is because of the restrictions on the rotational diffusion of the probe in micellar solution. It is observed that positively charged PyY shows a higher affinity to the negatively charged SDS compared with the positively charged CTAB and neutral TX‐100 surfactants. This can be explained by Coulombic interactions.     

Electron transfer reactions of ruthenium(II)–bipyridine complexes carrying tyrosine moiety with quinones

Three ruthenium(II)–bipyridine complexes carrying a tyrosine moiety were synthesized and photophysical and electron transfer studies with quinones were carried out using absorption and emission spectral techniques. The binding efficiency of quinones with ruthenium(II)–bipyridine complexes was also studied using these techniques. The binding efficiency was moderate and similar for all complexes with all quinones. The quenching modes were also similar and efficient for all complexes with all quinones. The quenching processes were diffusion controlled. The rate of electron transfer was calculated using semiclassical theory. Copyright © 2013 John Wiley & Sons, Ltd.     

Influence of Fullerene Acceptor on the Performance,Microstructure, and Photophysics of Low Bandgap Polymer Solar Cells

The morphology, photophysics, and device performance of solar cells based on the low bandgap polymer poly[[2,6′‐4,8‐di(5‐ethylhexylthienyl)benzo[1,2‐b;3,3‐b]dithiophene]3‐fluoro‐2[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl (PBDTTT‐EFT) (also known as PTB7‐Th) blended with different fullerene acceptors: Phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM), phenyl‐C₇₁ ‐butyric acid methyl ester (PC₇₁BM), or indene‐C₆₀ bisadduct (ICBA) are correlated. Compared to PC₇₁ BM‐based cells – which achieve a power conversion efficiency (PCE) of 9.4% – cells using ICBA achieve a higher open‐circuit voltage (V_OC) of 1.0 V albeit with a lower PCE of 7.1%. To understand the origin of this lower PCE, the morphology and photophysics have been thoroughly characterized. Hard and soft X‐ray scattering measurements reveal that the PBDTTT‐EFT:ICBA blend has a lower crystallinity, lower domain purity, and smaller domain size compared to the PBDTTT‐EFT:PC₇₁BM blend. Incomplete photoluminescence quenching is also found in the ICBA blend with transient absorption measurements showing faster recombination dynamics at short timescales. Transient photovoltage measurements highlight further differences in recombination at longer timeframes due to the more intermixed morphology of the ICBA blend. Interestingly, a mild thermal treatment improves the performance of PBDTTT‐EFT:ICBA cells which is exploited in the fabrication of a homo PBDTTT‐EFT:ICBA tandem solar cell with PCE of 9.0% and V_OC of 1.93 V.     

On the involvement of electron transfer reactions in the fluorescence decay kinetics heterogeneity of proteins

Time-resolved fluorescence study of single tryptophan-containing proteins, nuclease, ribonuclease T1, protein G, glucagon, and mastoparan, has been carried out. Three different methods were used for the analysis of fluorescence decays: the iterative reconvolution method, as reviewed and developed in our laboratory, the maximum entropy method, and the recent method that we called "energy transfer" method. All the proteins show heterogeneous fluorescence kinetics (multiexponential decay). The origin of this heterogeneity is interpreted in terms of current theories of electron transfer process, which treat the electron transfer process as a radiationless transition. The theoretical electron transfer rate was calculated assuming the peptide bond carbonyl as the acceptor site. The good agreement between experimental and theoretical electron-transfer rates leads us to suggest that the electron-transfer process is the principal quenching mechanism of Trp fluorescence in proteins, resulting in heterogeneous fluorescence kinetics. Furthermore, the origin of apparent homogeneous fluorescence kinetics (monoexponential decay) in some proteins also can be explained on the basis of electron-transfer mechanism.     

Micellar effect on the photophysics of heteroleptic ruthenium(II)–phenanthrolinedisulfonato complexes

Luminescent heteroleptic ruthenium(II) complexes of type RuL_nX_3–n [L = 1,10‐phenanthroline (phen), X = 4,7 diphenyl phenanthroline disulfonate, (dpsphen) n = 0,1,2,3] were synthesized and their photophysical properties investigated in homogeneous and cationic (CTAB), anionic (SDS) and nonionic (Triton X‐100) micelles. The luminescent quantum yield and lifetime of the complexes were found to increase in the presence of micellar media and on the introduction of a disulfonate ligand into the coordination sphere. Both electrostatic and hydrophobic interactions play an important role in the micellar media. Thus, by changing the nature of the ligands and the medium, we were able to tune the photophysical properties of Ru(II) complexes. Copyright © 2015 John Wiley & Sons, Ltd.     

Photophysics of PbS Quantum Dot Films Capped with Arsenic Sulfide Ligands

PbS quantum dots (QDs) of different sizes capped with short (NH₄)₃AsS₃ inorganic ligands are produced via ligand exchange processes from oleate‐capped PbS QDs. The solid‐state photophysical properties of the control organic‐capped and the inorganic‐ligand‐capped QDs are investigated to determine their potential for optoelectronic applications. Ultrafast transient transmission shows that in the oleate‐capped QDs, carrier recombination at sub‐nanosecond scales occurs via Auger recombination, traps, and surface states. At longer times, intense signals associated with radiative recombination are obtained. After ligand exchange, the QDs become decorated with (NH₄)₃AsS₃ complexes and relaxation is dominated by efficient carrier transfer to the ligand states on timescales as fast as ≈2 ps, which competes with carrier thermalization to the QD band edge states. Recombination channels present in the oleate‐capped QDs, such as radiative and Auger recombination, appear quenched in the inorganic‐capped QDs. Evidence of efficient carrier trapping at shallow ligand states, which appears more intense under excitation above the (NH₄)₃AsS₃ gap, is provided. A detailed band diagram of the various relaxation and recombination processes is proposed that comprehensively describes the photophysics of the QD systems studied.     

Structural properties and photophysical behavior of conformationally constrained hexapeptides functionalized with a new fluorescent analog of tryptophan and a nitroxide radical quencher

The influence of the conformational properties on the photophysics of two de novo designed hexapeptides was studied by spectroscopic measurements (ir, NMR, steady-state, and time resolved fluorescence) and molecular mechanics calculations. The peptide sequences comprise two nonproteinogenic residues: a beta-(1-azulenyl)-L-alanine (Aal) residue, obtained by formally functionalizing the Ala side chain with the azulene chromophore, and a Calpha-tetrasubstituted alpha-amino acid (TOAC), incorporating a nitroxide group in a cycloalkyl moiety. Aal represents a new fluorescent, quasi-isosteric Trp analog and TOAC a stable radical species, frequently used as a paramagnetic probe in biochemical studies. The peptide chains differ in the sequence position of the two probes and are heavily based on Aib (alpha-aminoisobutyric acid) residues to generate conformationally restricted helical structures, as confirmed by both spectroscopic and computational results. The conformationally controlled, excited state interactions, determining the photophysical relaxation of the Aal*/TOAC pair, are also discussed.