Contamination level and human health hazard assessment of heavy metals and polycyclic aromatic hydrocarbons (PAHs) in street dust deposited in Mahshahr,southwest of Iran

Mahshahr has a strategic position and is considered as industrial hub of Iran. Selected heavy metals and polycyclic aromatic hydrocarbons (PAHs) contamination and health risk, and the mineralogical composition of street dust from Mahshahr were investigated. Results indicated that geology is the main determinant of the dust mineralogical composition. Calculated enrichment factor (EF) and principal component analysis (PCA) showed that Pb, Hg, Zn, and Cu accumulations are greatly influenced by anthropogenic sources including traffic and industry. High heavy metals content poses great ecological risk in the study area and exposure doses revealed that ingestion is the main exposure route to street dust, especially for children in residential/commercial areas. It was found that the total amount of PAHs (∑PAHs) varies from 161 to 1996 µg/kg, dominated by four-ring PAHs. Diagnostic ratios and PCA showed that both petrogenic and pyrogenic sources of PAHs in Mahshahr street dust and traffic play important roles in this respect. Furthermore, toxic equivalents and incremental lifetime cancer risk of PAHs in street dust indicated a high potential carcinogenic risk for inhabitants mainly via dermal contact and ingestion pathways particularly for outdoor workers in industrial use scenario. Finally, distribution maps of total hazard index of heavy metals and cancer risk of PAHs indicated the most impacted zones for different groups and use scenarios.     

Fragments and dust after Holmium laser lithotripsy with or without “Moses technology”: How are they different?

Urinary stones can be readily disintegrated by Holmium:YAG laser (Holmium laser lithotripsy), resulting in a mixture of small stone dust particles, which will spontaneously evacuate with urine and larger residual fragments (RF) requiring mechanical retrieval. Differences between fragments and dust have not been well characterized. Also, it remains unknown how the recently introduced “Moses technology” may alter stone disintegration products. Three complementary analytical techniques have been used in this study to offer an in‐depth characterization of disintegration products after in vitro Holmium laser lithotripsy: stereoscopic microscopy, scanning electron microscopy and Fourier‐transform infrared spectroscopy. Dust was separated from fragments based on its floating ability in saline irrigation. Depending on initial crystalline constituents, stone dust either conserved attributes found in larger RFs or showed changes in crystalline organization. These included conversion of calcium oxalate dihydrate towards calcium oxalate monohydrate, changes in carbapatite spectra towards an amorphous phase, changes of magnesium ammonium phosphate towards a differing amorphous and crystalline phase and the appearance of hydroxyapatite on brushite fragments. Comparatively, “Moses technology” produced more pronounced changes. These findings provide new insights suggesting a photothermal effect occurring in Holmium laser lithotripsy. Figure: Appearance of hydroxyapatite hexagons on stone dust collected after Holmium laser lithotripsy of a brushite stone using “Moses technology.”      

Solid Biomass Climate Change Interventions Examined in a Context of Inherent Safety,Media Shifting,and Emerging Risks

ABSTRACT

This article examines recent evidence from Denmark and abroad regarding climate change projects that aim to reduce global carbon dioxide emissions by converting coal-fired thermal power plants to solid biomass fuel. The article argues that projects appear to be pursued narrow-mindedly with insufficient attention paid to safety and points to evidence of media shifting—that the “resolution” of a problem within the environmental domain creates a new problem in the workplace safety domain. From the perspective of inherent safety the article argues that the conversion is a step in the wrong direction as a low risk fuel is substituted for a less safe one. Because of rapid scale-up and handling of unprecedented quantities, solid biomass qualify as an emerging risk for which proper control strategies have yet to be developed. The article finally argues that the tendency to prioritize environmental benefits over safety concerns seems to run deep and not confined to the realm of only solid biomass. Danish environmental ambitions are very high and the costs to society of introducing solid biomass fuels are breathtaking. In this setting, the general failure to address safety risks appears particularly disheartening.     

Tank bioleaching of copper from combined flotation concentrate and smelter dust

Bioleaching studies were conducted to evaluate the extraction of copper from combined flotation concentrate and smelter dust using two different dust-addition strategies, non-fractional (simultaneously with concentrate) and fractional (step-wise dust addition) in stirred tank reactors. The highest copper extraction obtained with the fractional dust addition was up to 94% while extraction using the non-fractional method leveled off at approximately 44%. Thus, an increased copper recovery of about 50% was achieved with the fractional dust-addition method. It seems that the main reason for increased copper recovery using fractional dust addition could be the control and prevention of chalcopyrite passivation (according to SEM/EDS, XRD, and quantitative mineralogy data). This leads to its improved dissolution.     

粉尘螨变应原第7组分全长基因序列测定与分析

目的：获得粉尘螨变应原第7组分编码基因并了解其分子特征。方法：根据GenBank已公布的Derf7核酸序列设计引物,用RT—PCR扩增获得其编码基因,插入pMD19-T载体进行序列测定和生物信息学分析。结果：获得Derf7全长基因约642bp,与参考序列（GenBankAY283292）同源性达99．7％％,仅在249位”A→G”和439位“C→T”发生点突变,含1个完整的开放读码框。推测编码蛋白由213个氨基酸组成,信号肽序列位于1-17aa,亲水性指数为0．031,跨膜区域位于171—190aa,二级结构由一螺旋（57．28％）、延伸主链（6．57％）和无规卷曲（36．15％）组成;亚细胞定位于细胞质,含有N-糖基化位点1个（151-154aa）,蛋白激酶c磷酸化位点1个（193-195aa）,酪蛋白激酶Ⅱ磷酸化位点2个（155—158aaand173．176aa）。N端酰基化位点1个（97—102aa）。粉尘螨和屋尘螨变应原第7组分氨基酸序列相似度为86％,二者在螨类第7组分氨基酸序列构建出的分子进化树中聚成一簇。结论：获得了Derf7全长基因,为进一步获得其基因工程制品用于临床和实验研究奠定了基础。     

Pedoecological effects of a sand-fixing poplar (Populus simonii Carr.) forest in a desertified sandy land of Inner Mongolia, China

To assess the pedoecological effects of a 23-year old poplar ( Populus simonii Carr.) forest on soil amelioration and vegetation restoration via soil erosion reduction and atmospheric dust retention in a desertified sandy land ecosystem, daily dynamics of wind speed, sand transport and dust deposition rates were monitored over an erosive period from April through June in 2001, using fixed observation sites located at different positions within and around the forest. Soil and vegetation characteristics at these sites were also measured. The observation sites were placed at distances of 15H (as control), 6H and 3H (H is mean tree height) from the forest edge of the windward side (abbreviated CK, 6H-W and 3H-W respectively), forest center (FC), and at distances of 0H, 6H and 8H from the forest edge of the leeward side (FE-L, 6H-L and 8H-L respectively). Daily mean wind speed was significantly lower in different observation sites than CK, with FC having the greatest reduction of wind speed and 6H-W the least reduction. Daily transport rate of sand by wind was also significantly lower in different observation sites than CK, with FE-L having the greatest reduction of wind erosion and 6H-W the least reduction. The fact that the poplar forest will lose its functions against wind at a distance of about 12-fold tree height from the forest edge of the leeward side suggests that the effective wind-preventing range of the poplar forest is about 150 m. There was marked spatial and seasonal distribution of dust-fall rate. Over space, the rate of dust-fall was much greater within the forest than outside the forest. Over time, the daily dust deposition rate was greatest in April, followed in decreasing order by May, June, July, September and August, closely linked to the seasonal distribution pattern of dust storm. Significant positive changes in soil and vegetation parameters of the different observation sites during the 23 years that the poplar forest was established suggest the perceptible pedoecological effects of the poplar forest on soil development and restorative succession of plant community within its immediate vicinity through windbreak, soil erosion reduction and atmospheric dust retention. Understanding these pedoecological effects may aid in the design of protective forest systems in arid and semi-arid areas.     

Tunicamycin Inhibits Biosynthesis of Acid Mucopolysaccharides in Cultures of Chick Embryo Fibroblasts

Enterobacter cloacae KY 3074 grown in a medium containing xanthine, hypoxanthine, guanine, or their nucleosides and nucleotides produced xanthine oxidase. The purified enzyme preparation showed a major protein band and a few minor bands in acrylamide gel electrophoresis. Molecular oxygen was the most effective electron acceptor. Ferricyanide and 2,6-dichlorophenolindophenol also served as electron acceptors, but NAD and NADP did not. Xanthine and hypoxanthine were good substrates, and guanine was also an effective substrate. The activity was inhibited by Ag²⁺, Cu²⁺, PCMB, and ascorbate. The spectrum of the Enterobacter enzyme resembled that of some known xanthine oxidizing enzymes, and this suggests a similarity in the prosthetic groups of these enzymes. The molecular weight of the native enzyme and subunit was 128,000 and 69,000, respectively.     

Modelling and Bioinformatics Analysis of the Dimeric Structure of House Dust Mite Allergens from Families 5 and 21: Der f 5 Could Dimerize as Der p 5

Abstract

Allergy represents an increasing thread to public health in both developed and emerging countries and the dust mites Dermatophagoides pteronyssinus (Der p), Blomia tropicalis (Blo t), Dermatophagoides farinae (Der f), Lepidoglyphus destructor (Lep d) and Suidasia medanensis (Sui m) strongly contribute to this problem. Their allergens are classified in several families among which families 5 and 21 which are the subject of this work. Indeed, their biological function as well as the mechanism or epitopes by which they are contributing to the allergic response remain unknown and their tridimensional structures have not been resolved experimentally except for Blo t 5 and Der p 5. Blo t 5 is a monomeric three helical bundle, whereas Der p 5 shows a three helical bundle with a kinked N-terminal helix that assembles in an entangled dimeric structure with a large hydrophobic cavity. This cavity could be involved in the binding of hydrophobic ligands, which in turn could be responsible for the shift of the immune response from tolerance to allergic inflammation. We used molecular modelling approaches to bring out if other house dust mite allergens of families 5 and 21 (Der f 5, Sui m 5, Lep d 5, Der p 21 and Der f 21) could dimerize and form a large cavity in the same way as Der p 5. Monomeric models were first performed with MODELLER using the experimental structures of Der p 5 and Blo t 5 as templates. The ClusPro server processed the selected monomers in order to assess their capacity to form dimeric structures with a positive result for Der p 5 and Der f 5 only. The other allergens (Blo t 5, Sui m 5, Lep d 5, Der p 21 and Der f 21) did not present such a propensity. Moreover, we identified mutations that should destabilize and/or prevent the formation of the Der p 5 dimeric structure. The production of these mutated proteins could help us to understand the role of the dimerization process in the allergic response induced by Der p 5, and if Der p 5 and Der f 5 behave similarly.