High density culture of hybridoma cells using a perfusion culture vessel with an external centrifuge

The influence of centrifugal force on the growth of cells was examined by exposing the cells of the mouse-human hybridoma X87 line to centrifugal force (100–500 G) for ten minutes twice a day and comparing the static culture with that of unexposed cells. In this experiment, both cell proliferation and specific antibody productivity were independent of the centrifugal effect, and gave the same results as in the case of no exposure to centrifugal force. High density cultivation of the mouse-human hybridoma X87 line was obtained by a perfusion system where the cells were separated from the culture medium by continuous centrifugation. In the serum-free culture, the maximum viable cell density exceeded 10⁷ cells/ml, and monoclonal antibody was stably produced for 37 days. The results in this culture were equivalent to those obtained by intermittent centrifugal cell separation from the culture medium, and separation by gravitational settlement.     

Responses of the photosynthetic flagellate,Euglena gracilis,to hypergravity

Motility and orientation has been studied in the unicellular photosynthetic flagellate, Euglena gracilis, using real time image analysis capable of tracking up to 200 cells simultaneously in the slow rotating centrifuge microscope (NIZEMI) which allows one to observe the cells' swimming behavior during centrifugation accelerations between 1 g and 5 g. At 1 g the cells show a weak negative gravitaxis, which increases significantly at higher accelerations up to about 3 g. Though most cells were capable of swimming even against an acceleration of 4.5 g, the degree of gravitaxis decreased and some of the cells were passively moved downward by the acceleration force; this is true for most cells at 5 g. The velocity of cells swimming against 1 g is about 10% lower than that of cells swimming in other directions. The velocity decreases even more drastically in cells swimming against higher acceleration forces than those at 1 g. The degree of gravitactic orientation drastically decreases after short exposure to artificial UV radiation which indicates that gravitaxis may be due to an active physiological perception rather than a physical effect such as an asymmetry of the center of gravity within the cell. Offprint requests to: D.-P. Häder     

Studies on the complex formed between glucagon and dicaprylphosphatidylcholine

The interaction between glucagon and dicaprylphosphatidylcholine (DCPC) was studied by fluorescence, circular dichroism and calorimetry, as well as by ¹H- and ³¹P-nuclear magnetic resonance. The water-soluble lipid-protein complex was also characterized by gel filtration and ultracentrifugation. The complex appeared to be monodisperse by sedimentation equilibrium measurements, with a molecular weight of (4.55 ± 0.57)·10⁴. This complex contained approximately 7 molecules of glucagon and 35 molecules of phospholipid. Proton-decoupled ³¹P-NMR spectra of the phospholipid in the lipid-protein complex display narrower resonances than those of sonicated vesicles of DCPC, and ¹H-³¹P coupling could be detected in proton coupled spectra. These NMR results, together with gel-filtration results, suggest that glucagon ‘solubilizes’ phospholipid aggregates, forming a lipid-protein complex which is smaller than sonicated preparations of DCPC. ¹H-NMR resonance of both the methionine methyl group (met-27) and the aromatic envelope of glucagon are broadened by the phospolipid, indicating that the C-terminal region and the aromatic residues are involved in the interaction with the phospholipid. Nuclear magnetic resonance titrations of the imidazole ring C(2) and C(4) protons of the histidine residue of glucagon show that DCPC lowers the pK of the imidazole. The alterations caused by the phospholipid in the far and near ultraviolet CD spectra of glucagon reflect, respectively, the increased helix content of the hormone and the fact that the aromatic residues are located in a more structured environment. The phospholipid also alters the fluorescence properties of glucagon, shifting the fluorescence emission maximum of the hormone to shorter wavelength, and enhancing its relative intensity. This suggests that the fluorophore is experiencing a more hydrophobic environment in the presence of the lipid. Binding of glucagon to the phospholipid was analysed by Scatchard plots of the enhancement of fluorescence caused by the phospholipid and showed that the equilibrium binding constants of glucagon to DCPC are (4.4 ± 0.5)·10⁴M^?1 and (7.5±0.5)·10⁴M^?1, at 15°C and 25°C, respectively. The average number of moles of phospholipid bound per mole of glucagon is 4.4±0.6. The isothermal enthalpy of reaction of glucagon with DCPC is ?20.5 kcal/mol of glucagon at 25°C and ?32.5 kcal/mol of glucagon at 15°C. The observed enthalpies can arise from glucagon-induced cyrstallization of the phospholipid, from the non-covalent interactions between the peptide and lipid as well as from the lipid-induced conformational change in the protein. These results demonstrate that, unlike the complexes formed between glucagon and phospholipids which form more stable bilayers, the complex formed between glucagon and DCPC is stable over a wide range of temperatures, including temperatures well above the phase transition.     

A novel technique for the measurement of disruption in high-pressure homogenization: Studies on E. coli containing recombinant inclusion bodies

The high-pressure homogenization of Escherichia coli, strain JM101, containing inclusion bodies of recombinant porcine somatotropin was investigated. A novel technique employing an analytical disc centrifuge was used to monitor the disruption. This a direct technique which measures cell disintegration rather than soluble protein release. The technique is particularly suited to measurements where the disruption approaches 100%. The disk centrifuge provides a size distribution of the homogenate, and furnishes evidence for the preferential disruption of larger cells. For E. coli containing inclusion bodies, and increase in the cell feed concentration from 145 g/L (wet weight) to 330 g/L resulted is poorer homogenization. Poorer disruption was also obtained by lowering the feed temperature from 20 degrees C to 5 degrees C. Only slight variations in performance were obtained by increasing the feed pH from 7.5 to 9.0 or by storing the feed at 4 degrees C for 24 h prior to disruption. Comparison with uninduced E. coli strain JM101, showed that the disruption obtained is higher for bacteria containing a recombinant inclusion body.     

Monte-Carlo Simulations of Centrifugal Gas Separation

The use of a Monte–Carlo formalism in a centrifugal gas process separation simulation provides an efficient predictor of dew-pointing as a function of the imposed radial pressure gradient. Previously, this was done by simply calculating radial pressure and then resorting to a separate equation of state routine for evaluating whether condensation will occur or not. In our model, we incorporate the potential energy associated with rotation of a gas element into the simulation along with molecular interaction terms. This enables us to predict when sufficient nucleation has occurred that condensed material forms—an important limit for stable operation of a gas centrifuge.     

Amyloplast displacement is necessary for gravisensing in Arabidopsis shoots as revealed by a centrifuge microscope

The starch‐statolith hypothesis proposes that starch‐filled amyloplasts act as statoliths in plant gravisensing, moving in response to the gravity vector and signaling its direction. However, recent studies suggest that amyloplasts show continuous, complex movements in Arabidopsis shoots, contradicting the idea of a so‐called ‘static’ or ‘settled’ statolith. Here, we show that amyloplast movement underlies shoot gravisensing by using a custom‐designed centrifuge microscope in combination with analysis of gravitropic mutants. The centrifuge microscope revealed that sedimentary movements of amyloplasts under hypergravity conditions are linearly correlated with gravitropic curvature in wild‐type stems. We next analyzed the hypergravity response in the shoot gravitropism 2 (sgr2) mutant, which exhibits neither a shoot gravitropic response nor amyloplast sedimentation at 1  g . sgr2 mutants were able to sense and respond to gravity under 30  g conditions, during which the amyloplasts sedimented. These findings are consistent with amyloplast redistribution resulting from gravity‐driven movements triggering shoot gravisensing. To further support this idea, we examined two additional gravitropic mutants, phosphoglucomutase (pgm) and sgr9, which show abnormal amyloplast distribution and reduced gravitropism at 1  g . We found that the correlation between hypergravity‐induced amyloplast sedimentation and gravitropic curvature of these mutants was identical to that of wild‐type plants. These observations suggest that Arabidopsis shoots have a gravisensing mechanism that linearly converts the number of amyloplasts that settle to the ‘bottom’ of the cell into gravitropic signals. Further, the restoration of the gravitropic response by hypergravity in the gravitropic mutants that we tested indicates that these lines probably have a functional gravisensing mechanism that is not triggered at 1  g .     

Understanding and modeling retention of mammalian cells in fluidized bed centrifuges

Within the last decade, fully disposable centrifuge technologies, fluidized‐bed centrifuges (FBC), have been introduced to the biologics industry. The FBC has found a niche in cell therapy where it is used to collect, concentrate, and then wash mammalian cell product while continuously discarding centrate. The goal of this research was to determine optimum FBC conditions for recovery of live cells, and to develop a mathematical model that can assist with process scaleup. Cell losses can occur during bed formation via flow channels within the bed. Experimental results with the kSep400 centrifuge indicate that, for a given volume processed: the bed height (a bed compactness indicator) is affected by RPM and flowrate, and dead cells are selectively removed during operation. To explain these results, two modeling approaches were used: (i) equating the centrifugal and inertial forces on the cells (i.e., a force balance model or FBM) and (ii) a two‐phase computational fluid dynamics (CFD) model to predict liquid flow patterns and cell retention in the bowl. Both models predicted bed height vs. time reasonably well, though the CFD model proved more accurate. The flow patterns predicted by CFD indicate a Coriolis‐driven flow that enhances uniformity of cells in the bed and may lead to cell losses in the outflow over time. The CFD‐predicted loss of viable cells and selective removal of the dead cells generally agreed with experimental trends, but did over‐predict dead cell loss by up to 3‐fold for some of the conditions. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1520–1530, 2016     

A scale‐down mimic for mapping the process performance of centrifugation,depth and sterile filtration

In the production of biopharmaceuticals disk‐stack centrifugation is widely used as a harvest step for the removal of cells and cellular debris. Depth filters followed by sterile filters are often then employed to remove residual solids remaining in the centrate. Process development of centrifugation is usually conducted at pilot‐scale so as to mimic the commercial scale equipment but this method requires large quantities of cell culture and significant levels of effort for successful characterization. A scale‐down approach based upon the use of a shear device and a bench‐top centrifuge has been extended in this work towards a preparative methodology that successfully predicts the performance of the continuous centrifuge and polishing filters. The use of this methodology allows the effects of cell culture conditions and large‐scale centrifugal process parameters on subsequent filtration performance to be assessed at an early stage of process development where material availability is limited. Biotechnol. Bioeng. 2016;113: 1934–1941. © 2016 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc.     

Mammalian cell retention devices for stirred perfusion bioreactors

Within the spectrum of current applications for cell culture technologies, efficient large-scale mammalian cell production processes are typically carried out in stirred fed-batch or perfusion bioreactors. The specific aspects of each individual process that can be considered when determining the method of choice are presented. A major challenge for perfusion reactor design and operation is the reliability of the cell retention device. Current retention systems include cross-flow membrane filters, spin-filters, inclined settlers, continuous centrifuges and ultrasonic separators. The relative merits and limitations of these technologies for cell retention and their suitability for large-scale perfusion are discussed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Characterization of compost produced from separated pig manure and a variety of bulking agents at low initial C/N ratios

The aim of this study was to investigate the composting of separated pig manure solids with or without a variety of bulking agents at a low initial C/N ratio (12.5-23.3). Compost stability was investigated using an oxygen uptake rate (OUR) test and compost maturity was investigated using a germination index test. All treatments showed typical patterns of compost temperature. Temperatures above 60 °C were achieved by Day 2, followed by a thermophilic phase (50-60 °C), which lasted for 1 to 2 weeks followed by a cooling phase. The stability of one of treatments which did not contain any bulking agent - OUR of 25 mmol O₂ kg⁻¹ OM hour⁻¹ - was negatively affected by its initial high water content (69%). The addition of a bulking agent and initial water content below 60% were necessary to compost the separated solid fraction of pig manure at a low initial C/N ratio.