Production of N‐Acetyl‐Phosphinothricin: A Substance used for Inducing Male Sterility in Transgenic Plants

The non‐toxic compound N‐acetyl‐L‐phosphinothricin (N‐Ac‐L‐PPT) is used in a so‐called deacetylation system to induce male sterility in transgenic plants by tapetum specific deacetylation to the herbicide L‐phosphinothricin (L‐PPT). A procedure was developed to produce pure racemic and L‐isomeric N‐Ac‐PPT containing less than 30 ppm residual PPT. Experiments applied to wild type tobacco and PPT‐resistant tobacco showed that the maximal tolerated N‐Ac‐PPT concentration would be less than 45 mM of the L‐isomer. Otherwise unspecific deacetylation by several acylases, as well as by environmental conditions like higher temperatures or pHs beyond neutrality, increased the residual L‐PPT content to toxic concentrations. In contrast, N‐acetyl‐L‐phosphinothricyl‐alanyl‐alanine (N‐Ac‐L‐PPTT), a substance also occurring during the biosynthesis of phosphinothricyl‐alanyl‐alanine (PPTT) by some Streptomyces species, was tolerated up to 274 mM by wild type tobacco plants. However, the ArgE deacatylase from Escherichia coli originally used in the deacetylation system, as well as some other acylases, showed no activity towards N‐Ac‐L‐PPTT.     

Comparison of Ephestia kuehniella eggs sterilization methods for Trichogramma rearing

Mass production is necessary to ensure the availability of biological control agents for the suppression of target pests. Many rearing hosts need to be sterilized to prevent development. Host egg sterilization also allows their storage for a longer period. Ephestia kuehniella eggs are frequently used as hosts for Trichogramma parasitoïds but they must be sterilized to prevent larvae from emerging and eating the unhatched parasitized eggs. Three sterilization methods were examined: UV irradiation, freezing at −15 °C and vitrification (liquid nitrogen submersion). The dosage and exposure duration to provide egg sterilization were determined and then the suitability of hosts sterilized by the different methods were compared. E. kuehniella eggs abortion was achieved after 15 min by UV irradiation, 4 h by freezing at −15 °C and 30 s by vitrification. Vitrification resulted in significantly lower parasitoids production with a global emergence rate of 28.7%, compared to UV irradiation (75.1%), freezing at −15 °C (77.4%) and control (80.9%). Host eggs sterilization method did not affect sex-ratio, occurrence of malformation in adults, and female walking speed. Fecundity was significantly reduced in the females emerging from UV irradiated (37.2 offsprings) and vitrified (36.9 offsprings) eggs, compared to control (43.1 offsprings).     

一种有效地提高银杉人工菌根苗诱导率的方法

 银杉（Cathaya argyrophylla）是一种极其珍稀的濒危松科植物。该研究建立了一种有效的银杉人工菌根诱导技术。通过将银杉种子播种于琼脂培养基7 d后,切除1/5～1/3的 种皮以及胚乳,从而使银杉种子的发芽率达到60％以上;同时筛选出既适合外生菌根菌土生空团菌（Cenococcum geophilum）平铺扩展生长的要求,又能满足银杉幼苗生长的培养基 RM, 使银杉的侧根能最大程度地与菌丝接触,确保了菌根的诱导率;通过紫外线照射加70％酒精 或0.05%NaOCl的表面消毒的双重处理,使不能高压灭菌的容器达到表面消毒效果,同时验证了用该灭菌法既能达到完全的灭菌效果又不会对植物的生长产生不良影响,而且银杉小苗的菌根形成率达到87.5%。该方法对于银杉的菌根学研究以及其它基础研究具有实际应用价值     

培养基除菌过滤在百日咳菌苗生产中的应用

经一系列试验证实百日咳菌大罐培养浓度的下降与培养基中不耐热营养因子不足有关,将培养基的高压灭菌方式改为除菌过滤,保留热不稳定营养因子,可以提高百日咳菌大罐培养浓度;优化酸沉淀条件后,提高了菌苗回收率,从而节省了大量培养基,缩短了生产时间,获得了良好的经济效益。     

Supercritical carbon dioxide and hydrogen peroxide cause mild changes in spore structures associated with high killing rate of Bacillus anthracis

The present work examines chemical and structural response in B. anthracis spores killed by a mixture of supercritical carbon dioxide (SCCO₂) and hydrogen peroxide (H₂O₂). Deactivation of 6-log of B. anthracis spores by SCCO₂ + H₂O₂ was demonstrated, but changes in structure were observed in only a small portion of spores. Results from phase contrast microscopy proved that this treatment is mild and does not trigger germination-like changes. TEM imaging revealed mild damage in a portion of spores while the majority remained intact. Dipicolinic acid (DPA) analysis showed that < 10% of the DPA was released from the spore core into the external milieu, further demonstrating only modest damage to the spores. Confocal fluorescent microscopy, assessing uptake of DNA-binding dyes, directly demonstrated compromise of the permeability barrier. However, the magnitude of uptake was small compared to spores that had been autoclaved. This work suggests that SCCO₂ + H₂O₂ is quite mild compared to other sterilization methods, which has major implications in its application. These results provide some insight on the possible interactions between spores and the SCCO₂ + H₂O₂ sterilization process.     

Permanent contraception of dogs induced with intratesticular injection of a Zinc Gluconate-based solution

The objective was to evaluate the efficacy of a single intratesticular injection of a Zinc Gluconate-based solution to induce sterility in male dogs. Fifteen pubertal mongrel dogs (8 mo to 4 y old) were assigned to two groups; Control dogs (n = 5) received a single injection of an isotonic saline solution into each testis, whereas Treated dogs (n = 10), were given Testoblock, a proprietary zinc-gluconate (13.1 mg zinc/ml) solution in a physiological vehicle. The volume of saline or Testoblock injected varied from 0.2 to 1.0 ml/testis (based on testis width). Physical examination, testis width, hematology, clinical chemistry (hepatic and renal function), plasma testosterone concentration, semen characteristics, and libido, were assessed until castration (150 d after treatment). In Treated dogs, testis width increased (approximately 20%) relative to that in Control dogs, but subsequently was not significantly different from Controls (group × time interaction, P < 0.0001). For all dogs, values for hematology and clinical chemistry consistently remained within reference ranges. Although plasma testosterone concentrations decreased over time (P < 0.006), there was only a tendency for an effect of group (P < 0.09), and libido was not significantly affected. By 63 d after Testoblock treatment, eight Treated dogs were azoospermic, whereas the remaining two were oligozoospermic (<10 × 10⁶ sperm/ml). We concluded that intratesticular injection of the Zinc Gluconate-based chemical sterilant Testoblock has considerable potential to induce permanent contraception in male dogs.     

Potential biological indicators for glutaraldehyde and formaldehyde sterilization processes

The present study aimed to isolate, select, and evaluate bacterial isolates with potential for use as biological indicators for sterilization with glutaraldehyde and/or formaldehyde. A total of 340 local Bacillus isolates were screened for glutaraldehyde and/or formaldehyde resistance by determination of minimum inhibitory concentrations (MICs), minimum bactericidal concentrations (MBCs), and extinction time and were compared with B. subtilis (var. niger) ATCC 9372, the biological indicator for ethylene oxide sterilization, as reference. Of these, 85 isolates had glutaraldehyde MICs of 0.5% or higher, while 29 had formaldehyde MICs of 0.04% or higher. Of the 29 resistant isolates, 15 had MBCs of 0.05% or more. Extinction times were used to evaluate the bactericidal/sporicidal activity of glutaraldehyde. Eight had inactivation times of more than 5 h in 2% glutaraldehyde (pH 8), whereas 12 had inactivation times of more than 3 h in l% formaldehyde, with one isolate in common. These 19 isolates were selected and evaluated as potential biological indicators for aldehydes by determination of the decimal reduction times (D values), compared with the reference strain. Eight glutaraldehyde-resistant isolates exhibited D values 2.0- to 3.5-fold higher than the reference strain (30 min.). Only five of 12 formaldehyde resistant isolates had D values higher than that of the reference strain. Using six resistant isolates, temperature coefficient values between 2.11 and 3.02 were obtained for 2% formaldehyde. Finally, 14 isolates were tested for potential pathogenicity and were identified to species level. All of the eight glutaraldehyde-resistant isolates, including the isolate with dual resistance, and three formaldehyde-resistant isolates were B. licheniformis, while two other formaldehyde-resistant isolates were B. cereus. Six of the selected B. licheniformis isolates are potential biological indicators for sterilization processes using aldehydes. Three can be suggested for glutaraldehyde only and three for both aldehydes. Electronic Publication     

The Effect of Sterilization, pH, Filler and Spore Inoculum Concentration on the Preparation of Alginate Pellets

Alginate encapsulation of an atoxigenic strain of Aspergillus flavus was studied in order to optimize encapsulation of fungal inocula with alginic acid. Sterilization by autoclaving is known to depolymerize sodium alginate. Buffered solutions (pH = 7-8) reduced this effect. Autoclaving the alginate solution with a filler/nutrient further inhibited the depolymerization reaction. Autoclaving under optimal conditions allowed a less expensive alginate (medium viscosity) to be used at a lower concentration (1%) to produce a stable product. The lowest cost pellets resulted from use of 1% medium viscosity sodium alginate with 10% cotton-seed meal. Further savings may be achieved by performing fermentations directly in alginate-nutrient mixtures and thus eliminating the mixing and blending steps. In such formulations, the nutrient composition and length of fermentation must be adjusted to prevent alginate hydrolysis. The ultimate composition of alginate pellets is influenced by the diffusion of nutrients during gelation. Up to 65% of water-soluble nutrients were lost from alginate pellets during gelation. Once pellets are introduced into the environment, organisms other than the formulated agent compete for pelleted nutrients. A minimum concentration of the biocontrol agent must be present to ensure the agent excludes competitors and successfully converts the nutrients to biomass. For A. flavus, 5000 spores g^-1 were required.     

Evaluation of the ScopeControl endoscope test system in six hospitals in The Netherlands

As rigid endoscopes are re-used after minimal invasive surgery, they degrade over time. To guarantee the optical quality of a rigid endoscope, the ScopeControl has been developed to measure key optical parameters such as, light transmission (LT), color correctness (CC), focus (FC), fiber transmission (FT), viewing angle (VA) and field of view (FV). To evaluate the performance of the ScopeControl, five ScopeControls SV (study version) have been tested in six hospitals in the Netherlands. Aspects such as robustness, precision, usability of the measured data, acceptation criteria and ergonomic aspects have been assessed. The ScopeControl maintains its stability over time and can measure LT, CC and FC with 5% precision, VA and FV with 2% accuracy and FT with 10% precision. The final thresholds above which an endoscope could still be considered to be in good condition, appeared to be: VA at 75%, CC, FC and FV at 70%, LT at 65% and FT at 35% of that of the best endoscope of that type ever found. The ScopeControl SV fits the workflow of the sterilization department as it is easy to use and can easily be cleaned. The time to perform a measurement is 2–3 min (one minute is spent to select the correct endoscope). The ScopeControl PV (launched in November 2013), has been used clinically from April to November 2014. It proves to be more stable, well accepted by personnel from the sterilization department and be of large value of preventing defect endoscopes on the surgery table.