Effect of glutaraldehyde fixation on the frictional response of immature bovine articular cartilage explants

This study examined functional properties and biocompatibility of glutaraldehyde-fixed bovine articular cartilage over several weeks of incubation at body temperature to investigate its potential use as a resurfacing material in joint arthroplasty. In the first experiment, treated cartilage disks were fixed using 0.02, 0.20 and 0.60% glutaraldehyde for 24 h then incubated, along with an untreated control group, in saline for up to 28 d at 37 °C. Both the equilibrium compressive and tensile moduli increased nearly twofold in treated samples compared to day 0 control, and remained at that level from day 1 to 28; the equilibrium friction coefficient against glass rose nearly twofold immediately after fixation (day 1) but returned to control values after day 7. Live explants co-cultured with fixed explants showed no quantitative difference in cell viability over 28 d. In general, no significant differences were observed between 0.20 and 0.60% groups, so 0.20% was deemed sufficient for complete fixation. In the second experiment, cartilage-on-cartilage frictional measurements were performed under a migrating contact configuration. In the treated group, one explant was fixed using 0.20% glutaraldehyde while the apposing explant was left untreated; in the control group both explants were left untreated. From day 1 to 28, the treated group exhibited either no significant difference or slightly lower friction coefficient than the untreated group. These results suggest that a properly titrated glutaraldehyde treatment can reproduce the desired functional properties of native articular cartilage and maintain these properties for at least 28 d at body temperature.     

Quantitative detection of asbestos fiber in gravelly sand using elastic body-exposure method

Chrysotile or crocidolite colloidal solution containing donor plasmid DNA and Escherichia coli cells was subjected to elastic body friction. These acicular clay minerals mediated E. coli antibiotic resistance plasmid transformation. Other clay minerals had no effect on E. coli transformation. The number of E. coli transformants was counted after elastic body exposure with various crocidolite concentrations. There was a correlation between the number of E. coli transformants and crocidolite concentration (between 40 and 1,000 ng/ml). A mixture consisting of sea sand and crocidolite was utilized as a model for quantitative detection of asbestos in gravelly sand. With sea sand containing 0.15–15 mg of crocidolite, a correlation between crocidolite concentration and the number of colonies derived from E. coli transformants was observed. This indicates that measurement of asbestos is possible even when the asbestos sample includes gravelly sand. Fluorescence microscopic observation of crocidolite colloidal solution indicated that crocidolite was present as spherical aggregates having diameters of 6–9 μm. Thus, the number of transformants correlated with that of 6–9 μm crocidolite aggregates.     

Frictional properties of contacting surfaces in the hemelytra-hindwing locking mechanism in the bug<Emphasis Type="Italic"> Coreus marginatus</Emphasis> (Heteroptera,Coreidae)

The structure and function of the hemelytra-to-hindwing locking mechanism of the bug Coreus marginatus were analysed. The system consists of a cuticular protrusion in the ventral side of the hemelytra, which locks the subcostal border of the hindwing in flight. The speed and distance slid by both surfaces against one another during flight were assessed using a combination of high-speed video recordings and a 2D geometrical model. The friction coefficient between sliding surfaces was assessed using a micromanipulator, coupled with force transducers. This was done under three experimental conditions: freshly dissected, air dried and rehydrated ethanol preserved samples. The results showed a high speed of sliding, approximately 0.18 m s^–1, with a relatively low friction coefficient (0.2 ). There was no evident difference in the friction measured under the various treatments, with the exception of the rehydrated condition, which was lower. The surface morphology of the wing locking mechanism, namely outgrowths of one part having rounded edges, and completely flat surface on the counterpart, effectively aids in the reduction of friction at the microscopic level. The structure is effective even dry, and after being preserved in ethanol, suggesting that no cuticle secreted lubrication substance is responsible for its effectiveness. The ultrastructure presumably confers mechanical stability to the system under the high load it is subjected to in flight.     

Mass-transfer-limited nitrate uptake on a coral reef flat,Warraber Island,Torres Strait,Australia

Previous research has identified a relationship between the rate of dissipation of turbulent kinetic energy, , and the mass-transfer-limited rate of uptake by a surface, herein called the ^1/4 law, and suggests this law may be applicable to nutrient uptake on coral reefs. To test this suggestion, nitrate uptake rate and gravitational potential energy loss have been measured for a section of Warraber Island reef flat, Torres Strait, northern Australia. The reef flat section is 3 km long, with a 3 m tidal range, and on the days measured, subject to 6 m s^–1 tradewinds. The measured nitrate uptake coefficient, S , on two consecutive days during the rising tide was 1.23±0.28 and 1.42±0.52×10^–4 m s^–1. The measured loss of gravitational potential energy across the reef flat, GPE , on the same rising tides over a 178 m section was 208±24 and 161±20 kg m^–1 s^–2. Assuming the GPE is dissipated as turbulent kinetic energy in the water column, and using the ^1/4 law, the mass-transfer-limited nitrate uptake coefficient, S_MTL , on the two days was 1.57±0.03 and 1.45±0.04×10^–4 m s^–1. Nitrate uptake on Warraber Island reef flat is close to the mass-transfer limit, and is determined by oceanographic nitrate concentrations and energy climate.Communicated by B.C. Hatcher     

The mandibular corpus of female primates: taxonomic, dietary, and allometric correlates of interspecific variations in size and shape

Measurements were taken on skulls of 253 adult female anthropoid primates from 32 species, in order to determine patterns and possible causes for variation among species in the cross-sectional size and shape of the mandibular corpus under M1. When all 32 species are considered as a group, there is a tendency for corpus shape to become more robust with increasing body size. However, this does not hold for colobines or cercopithecines evaluated separately. When diets are classified into the general categories of folivory or frugivory, neither size-adjusted measurements of mandibular corpus breadth and height, nor estimates of the second moments of inertia or the polar moment of inertia of the mandibular cross section, show any relationship to dietary variation among species. Species reported to include hard nuts in their diets have larger mandibular cross sections than other species, and the size of the corpus is significantly correlated with size of the dentition and molar enamel thickness. A biomechanical model taking into account frictional effects of tooth-to-tooth contact indicates that mandibular corpus robusticity may not be related to a large horizontal component of force during mastication.     

The volar skin of primates: its frictional characteristics and their functional significance.

Friction of volar skin on wood is not proportional to load in human beings and prosimians, but to load raised to a fractional power. This meets theoretical expectations for the frictional characteristics of convex elastic surfaces. Although this enables small clawless primates to cling to steeper slopes and larger vertical supports than would otherwise be possible, the magnitude of the effect is not great enough to overcome the disadvantages of clawlessness in climbing vertical or steeply-sloping tree trunks and branches. In human subjects, friction appears to be more nearly proportional to load than in small prosimians used as experimental subjects. It is suggested that this is due to the fact that the small animals have discrete, elevated volar pads. Pad coalescence in large primates may be an adaptation for increasing the power to which load must be raised to become proportional to friction; increasing this exponent yields more friction per unit of adduction force on supports that are small relative to the animals' dimensions and weights.     

农田林网化地区近地面层廓线特征研究

大面积林网化地区近地面层大气的系留气球观测发现,近地面层大气的风、温、湿分为两层,即下边界层和扰动边界层,其厚度和廓线分布与理查逊数有关,在中性天气条件下均满足对数分布规律,边界层（特别是扰动边界层）内的摩擦速度Ｕ．＂与旷野对比点的摩擦速度Ｕ０增大１个数量级,而粗糙度Ｚ＂０增大２个数量级,甚至更大。     

Required coefficient of friction during turning at self-selected slow,normal, and fast walking speeds

This study investigated the relationship of required coefficient of friction to gait speed, obstacle height, and turning strategy as participants walked around obstacles of various heights. Ten healthy, young adults performed 90° turns around corner pylons of four different heights at their self selected normal, slow, and fast walking speeds using both step and spin turning strategies. Kinetic data was captured using force plates. Results showed peak required coefficient of friction (RCOF) at push off increased with increased speed (slow μ=0.38, normal μ=0.45, and fast μ=0.54). Obstacle height had no effect on RCOF values. The average peak RCOF for fast turning exceeded the OSHA safety guideline for static COF of μ>0.50, suggesting further research is needed into the minimum static COF to prevent slips and falls, especially around corners.     

Fluid dynamics of liquid egg products

The rheological behavior of liquid egg products (egg yolk, egg white, and whole liquid egg) was studied using a concentric cylinder viscometer. Eggs of three poultry specimens were used: hen (Isa Brown), Japanese quail (Coturnix japonica), and goose (Anser anser f. domestica). Rheological behavior was pseudoplastic and flow curves fitted by the power law model (Herschel–Bulkley and Ostwald–De Waele). The meaning of rheological parameters on friction factors and velocity profiles during flow of liquid egg products in tube has been shown.     

Static and dynamic human flexor tendon–pulley interaction

The aim of the study was to investigate the influence of a preceding flexion or extension movement on the static interaction of human finger flexor tendons and pulleys concerning flexion torque being generated. Six human fresh frozen cadaver long fingers were mounted in an isokinetic movement device for the proximal interphalangeal (PIP) joint. During flexion and extension movement both flexor tendons were equally loaded with 40 N while the generated moment was depicted simultaneously at the fingertip. The movement was stopped at various positions of the proximal interphalangeal joint to record dynamic and static torque. The static torque was always greater after a preceding extension movement compared to a preceding flexion movement in the corresponding same position of the joint. This applied for the whole arc of movement of 0–105°. The difference between static extension and flexion torque was maximal 11% in average at about 83° of flexion. Static torque was always smaller than dynamic torque during extension movement and always greater than dynamic torque during flexion movement. The kind of preceding movement therefore showed an influence to the torque being generated in the proximal interphalangeal joint. The effect could be simulated on a mechanical finger device.