The effect of isokinetic dynamometer deceleration phase on maximum ankle joint range of motion and plantar flexor mechanical properties tested at different angular velocities

During range of motion (max-ROM) tests performed on an isokinetic dynamometer, the mechanical delay between the button press (by the participant to signal their max-ROM) and the stopping of joint rotation resulting from system inertia induces errors in both max-ROM and maximum passive joint moment. The present study aimed to quantify these errors by comparing data when max-ROM was obtained from the joint position data, as usual (max-ROM_POS), to data where max-ROM was defined as the first point of dynamometer arm deceleration (max-ROM_ACC). Fifteen participants performed isokinetic ankle joint max-ROM tests at 5, 30 and 60° s⁻¹. Max-ROM, peak passive joint moment, end-range musculo-articular (MAC) stiffness and area under the joint moment-position curve were calculated. Greater max-ROM was observed in max-ROM_POS than max-ROM_ACC (P < 0.01) at 5 (0.2 ± 0.15%), 30 (1.8 ± 1.0%) and 60° s⁻¹ (5.9 ± 2.3%), with the greatest error at the fastest velocity. Peak passive moment was greater and end-range MAC stiffness lower in max-ROM_POS than in max-ROM_ACC only at 60° s⁻¹ (P < 0.01), whilst greater elastic energy storage was found at all velocities. Max-ROM and peak passive moment are affected by the delay between button press and eventual stopping of joint rotation in an angular velocity-dependent manner. This affects other variables calculated from the data. When high data accuracy is required, especially at fast joint rotation velocities (≥30° s⁻¹), max-ROM (and associated measures calculated from joint moment data) should be taken at the point of first change in acceleration rather than at the dynamometer’s ultimate joint position.     

Effect of adding plyometric training to physical education sessions on specific biomechanical parameters in primary school girls

Objectives:The study aimed to determine the effect of adding a school-based plyometric training program (PMT) to physical education (PE) sessions on the strength, balance, and flexibility in primary school girls.Methods:Students from grades 3-6 were randomized equally to a plyometric or control group. In the control group, students took their regular PE classes twice a week. In the plyometric group, students performed PMT twice a week during the initial 20 minutes of every PE session. The Lido Linea closed kinetic chain isokinetic dynamometer, Star excursion balance test (SEBT), and sit-and-reach test were used to assess muscle strength, balance, and flexibility, respectively, before and after nine weeks of training.Results:The improvement in extension peak force (p=0.04) and extension total work (p<0.001) was more prevalent in the PMT group than in the control group. SEBT scores had improved significantly (p<0.05) for all directions in the PMT group, except in the anterior direction, which was highly significant (p<0.001). Hamstring and lower back flexibility had improved more in the PMT group than in the control group (p<0.001).Conclusion:Adding PMT to regular PE classes has a positive and notable effect on muscle strength, balance, and flexibility in primary school students.     

Flexibility is a mechanical determinant of antimicrobial activity for amphipathic cationic α-helical antimicrobial peptides

Antimicrobial peptides (AMPs) are recognized as the potential substitutions for common antibiotics. Flexibility has been demonstrated to be a dominant on antimicrobial activity of an AMP, similar to the structural parameters such as hydrophobicity and hydrophobic moment as well as positive charge. To better understand the effect of flexibility on antimicrobial activity, we herein examined seventy-eight peptides derived from nine different species. Defined as a weighted average of amino acid flexibility indices over whole residue chain of AMP, flexibility index was used to scale the peptide flexibility and indicated to be a reflection of mechanical properties such as tensile and flexural rigidities. The results demonstrated that flexibility index is relevant to but different from other structural properties, may enhance activity against Escherichia coli for stiff clustered peptides or reduce activity against E. coli for flexible clustered peptides, and its optimum occurs at about − 0.5. This effect of flexibility on antimicrobial activity may be involved to the antimicrobial actions, such as stable peptide-bound leaflet formation and sequent stress concentration in target cell membrane, mechanically. The present results provide a new insight in understanding antimicrobial actions and may be useful in seeking for a new structure–activity relationship for cationic and amphipathic α-helical peptides.     

Fluidity enhancement: a critical factor for performance of liposomal transdermal drug delivery system

Liposomes are well known lipid carriers for drug delivery of bioactive molecules encapsulated inside their membrane. Liposomes as skin drug delivery systems were initially promoted primarily for localized effects with minimal systemic delivery. Subsequently, a novel vesicular system, transferosomes was reported for transdermal delivery with efficiency similar to subcutaneous injection. The multiple bilayered organizations of lipids applied in these vesicles structure are somewhat similar to complex nature of stratum corneal intercellular lipids domains. The incorporation of novel agents into these lipid vesicles results in the loss of entrapped markers but it is similar to fluidization of stratum corneum lipids on treatment with a penetration enhancer. This approach generated the utility of penetration enhancers/fluidizing agents in lipids vesicular systems for skin delivery. For the transdermal and topical applications of liposomes, fluidity of bilayer lipid membrane is rate limiting which governs the permeation. This article critically reviews the relevance of using different types of vesicles as a model for skin in permeation enhancement studies. This study has also been designed to encompass all enhancement measurements and analytical tools for characterization of permeability in liposomal vesicular system.     

Flexibility of first brood production in a claustral ant, Camponotus japonicus (Hymenoptera: Formicidae)

The numbers of first-batch eggs and workers (minims) in a carpenter ant Camponotus japonicus are not fixed but are regulated in response to various internal and external factors of founding queens. The initial body weight of founding queens was positively correlated with the number of minims. The amount of queen weight loss during the founding period was highly correlated with the number of minims. The numbers of first-batch eggs and minims for artificially fed queens were significantly greater than those for control group queens and for unfed queens, respectively. The number of eggs laid by a queen increased when eggs deposited in the early stage of founding were removed. In contrast, artificial addition of alien eggs reduced the number of eggs laid by a queen. The adaptive implications of this flexibility in the production of the first-batch brood in C. japonicus are discussed. Received: December 18, 2000 / Accepted: March 19, 2001     

Understanding antibody–antigen associations by molecular dynamics simulations: Detection of important intra- and inter-molecular salt bridges

1 NSec molecular dynamics (MD) simulation of anti-hen egg white antibody, HyHEL63 (HH63), complexed with HEL reveals important molecular interactions, not revealed in its X-ray crystal structure. These molecular interactions were predicted to be critical for the complex formation, based on structure–function studies of this complex and 3-other anti-HEL antibodies, HH8, HH10 and HH26, HEL complexes. All four antibodies belong to the same structural family, referred to here as HH10 family. Ala scanning results show that they recognize ‘coincident epitopes’. 1 NSec explicit, with periodic boundary condition, MD simulation of HH63-HEL reveals the presence of functionally important salt-bridges. Around 200 ps in vacuo and an additional 20 ps explicit simulation agree with the observations from 1 Nsec simulation. Intra-molecular salt-bridges predicted to play significant roles in the complex formation, were revealed during MD simulation. A very stabilizing salt-bridge network, and another intra-molecular salt-bridge, at the binding site of HEL, revealed during the MD simulation, is proposed to predipose binding site geometry for specific binding. All the revealed salt-bridges are present in one or more of the other three complexes and/or involve “hot-spot” epitope and paratope residues. Most of these charged epitope residues make large contribution to the binding free energy. The “hot spot” epitope residue Lys97_Y, which significantly contributes to the free energy of binding in all the complexes, forms an intermolecular salt-bridge in several MD conformers. Our earlier computations have shown that this inter-molecular salt-bridge plays a significant role in determining specificity and flexibility of binding in the HH8-HEL and HH26-HEL complexes. Using a robust criterion of salt-bridge detection, this inter-molecular salt-bridge was detected in the native structures of the HH8-HEL and HH26-HEL complexes, but was not revealed in the crystal structure of HH63-HEL complex. The electrostatic strength of this revealed salt-bridge was very strong. During 1 Nsec MD simulation this salt-bridge networks with another inter-molecular salt-bridge to form an inter-molecular salt-bridge triad. Participation of Lys97_Y in the formation of inter-molecular triad further validates the functional importance of Lys97_Y in HH63-HEL associations. These results demonstrate that many important structural details of biomolecular interactions can be better understood when studied in a dynamic environment, and that MD simulations can complement and expand information obtained from static X-ray structure. This study also highlights “hot-spot” molecular interactions in HyHEL63-HEL complex. The publisher or recipient acknowledges right of the U.S. Government to retain a non exclusive, royalty-free license in and to any copyright covering the article.     

Cold-active enzymes studied by comparative molecular dynamics simulation

Enzymes from cold-adapted species are significantly more active at low temperatures, even those close to zero Celsius, but the rationale of this adaptation is complex and relatively poorly understood. It is commonly stated that there is a relationship between the flexibility of an enzyme and its catalytic activity at low temperature. This paper gives the results of a study using molecular dynamics simulations performed for five pairs of enzymes, each pair comprising a cold-active enzyme plus its mesophilic or thermophilic counterpart. The enzyme pairs included α-amylase, citrate synthase, malate dehydrogenase, alkaline protease and xylanase. Numerous sites with elevated flexibility were observed in all enzymes; however, differences in flexibilities were not striking. Nevertheless, amino acid residues common in both enzymes of a pair (not present in insertions of a structure alignment) are generally more flexible in the cold-active enzymes. The further application of principle component analysis to the protein dynamics revealed that there are differences in the rate and/or extent of opening and closing of the active sites. The results indicate that protein dynamics play an important role in catalytic processes where structural rearrangements, such as those required for active site access by substrate, are involved. They also support the notion that cold adaptation may have evolved by selective changes in regions of enzyme structure rather than in global change to the whole protein. Figure Collective motions in C^α atoms of the active site of cold-active xylanase Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

A conformational study of alpha-D-Manp-(1-->2)-alpha-D-Manp-(1-->O)-L-Ser by NMR 1H,1H T-ROESY experiments and molecular-dynamics simulations

The conformational preference of alpha-D-Manp-(1-->2)-alpha-D-Manp-(1-->O)-L-Ser has been investigated by one-dimensional (1)H,(1)H T-ROESY experiments and molecular-dynamics simulations with CHARMM22 type of force fields and water as explicit solvent. Proton-proton distances were obtained from the simulations and subsequently experimentally determined distances could be derived. Measurements were performed on the title compound as well as on selectively deuterium-substituted analogues synthesized as part of this study to alleviate possible NMR spectroscopic difficulties. A very good agreement was present between the separate NMR experiments. In the subsequent analysis a key nuclear Overhauser effect between the anomeric protons in the two sugar residues was used to assess the conformational dynamics revealed by the molecular simulations. The combined results support a model in which two states are significantly populated as a result of flexibility around the bond defined by the glycosidic torsion angle psi.     

Molecular dynamics analysis of the engrailed homeodomain-DNA recognition

Molecular dynamics (MD) simulations were performed for investigating the role of Gln50 in the engrailed homeodomain-DNA recognition. Employing the crystal structure of free engrailed homeodomain and homeodomain-DNA complex as a starting structure, we carried out MD simulations of: (i) the complex between engrailed homeodomain and a 20 base-pair DNA containing TAATTA core sequence; (ii) the free engrailed homeodomain. The simulations show that homeodomain flexibility does not depend on its ligation state. The engrailed homeodomain shows similar flexibility, and the recognition helix-3 shows very similar characteristic of high rigidity and limited conformational space in two complexation states. At the same time, DNA structure has also no obvious conformational fluctuations. These results preclude the possibility of the side chain of Gln50 forming direct hydrogen bonds to the core DNA bases. MD simulations confirm a few well-conserved sites for water-mediated hydrogen bonds from protein to DNA are occupied by water molecules, and Gln50 interacts with corresponding core DNA bases through water-mediated hydrogen bonds. So Gln50 plays a relatively modest role in determining the affinity and specificity of the engrailed homeodomain. In addition, the electrostatic interaction between homeodomain and phosphate backbone of the DNA is a main factor for N- and C-terminal arm becoming ordered upon DNA binding.     

Use of negative stain and single-particle image processing to explore dynamic properties of flexible macromolecules

Flexible macromolecules pose special difficulties for structure determination by crystallography or NMR. Progress can be made by electron microscopy, but electron cryo-microscopy of unstained, hydrated specimens is limited to larger macromolecules because of the inherently low signal-to-noise ratio. For three-dimensional structure determination, the single particles must be invariant in structure. Here, we describe how we have used negative staining and single-particle image processing techniques to explore the structure and flexibility of single molecules of two motor proteins: myosin and dynein. Critical for the success of negative staining is a hydrophilic, thin carbon film, because it produces a low noise background around each molecule, and stabilises the molecule against damage by the stain. The strategy adopted for single-particle image processing exploits the flexibility available within the SPIDER software suite. We illustrate the benefits of successive rounds of image alignment and classification, and the use of whole molecule averages and movies to analyse and display both structure and flexibility within the dynein motor.