MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

Decision Support through Mass and Energy Flow Management in the Vehicle-Refinishing Sector

In the past few decades, major advances in environmental protection within the coating application industry have been made. In spite of this technological progress, approximately 50% of industrial-solvent emissions still come from the paint-application sector. The advances made in reducing emissions for plants requiring licensing have unfortunately had no influence on the environmental efforts of smaller companies. Solvent-reduced painting systems, such as high-solid paints, water-based coating, and powder coating have not been able to achieve acceptance, nor have innovative application technologies. The principal arguments against a conversion to these ecologically more favorable alternatives were related to cost and quality.
Recently, the EU Solvent Directive (1999/13/EC) went into effect, aiming to significantly reduce industrial-solvent emissions. Up until this point, however, instruments enabling smaller companies to determine their solvent emissions and to simultaneously develop process-improvement potentials while keeping costs in mind have been missing.
Using the mass and energy flow-management approach, cost structures and environmental benefits can be made transparent to the entrepreneur. The primary result of the research projects presented here is the computer-based mass and energy flow model called the individual computer-aided mass and energy flow model for the vehicle-refinishing sector (IMPROVE). It can be used as a detailed business-consultancy tool. Based upon this, practical guidelines were developed for easy orientation and activity planning. They can be used by companies to help them fulfill the requirements of environmental legislation and to display the benefits that can be achieved by various emission-reduction measures.     

Application of PIXE analysis to the study of the regional distribution of trace elements in normal human brain

A particle-induced X-ray emission (PIXE) analysis method is presented, which allows measurement of eight elements (i.e., K, Ca, Mn, Fe, Cu, Zn, Se, and Rb) in human brain samples of only a few mg dry weight. The precision and accuracy of the method were investigated by analyzing animal brain matter with both PIXE and instrumental neutron activation analysis (INAA). The method was applied to measure the 8 elements in 46 different regions of 3 human brains. The sections analyzed originated from either the left or the right cerebral hemisphere, brain stem, and cerebellum. For one of the brains, sections were also analyzed from 26 corresponding regions of both hemispheres. For all elements, similar concentrations were found in the corresponding areas of the left and right sides of the brain. The concentrations (in μg/g dry weight) of the elements K, Fe, Cu, Zn, Se, and Rb were consistently higher in cortical structures than in white matter. Deep nuclei and brain stem, which have a mixed composition, showed intermediate values for K, Zn, Se, and Rb. A hierarchical cluster analysis indicated that the various brain regions clustered into two large groups, one comprising gray and mixed matter regions and the other, white and mixed matter brain areas.     

Turnover of Brain Monoamine Oxidase Measured In Vivo by Positron Emission Tomography Using l-[11C]Deprenyl

The distribution of carbon-11-labeled L-deprenyl, an irreversible inhibitor of monoamine oxidase type B (MAO-B), was determined in the baboon brain by positron emission tomography. The irreversible blood-to-brain transfer constant (influx constant, K_i) was measured using a complete metabolite-corrected arterial plasma concentration curve. This influx constant was used as a measure of functional enzyme activity for sequential determinations of MAO-B recovery following a single high dose of unlabeled l -deprenyl. The half-life for turnover of MAO-B was thus determined to be 30 days. Using appropriate irreversible inhibitors, this procedure should be generally useful for determining enzyme turnover rates in any organ in vivo and can be applied to some human studies as well.     

Occurrence of isopropylthio compounds in the aquatic ecosystem (Lake Neusiedl, Austria) as a chemical marker for Microcystis flos-aquae

Abstract Volatile organic sulfur compounds occuring during a bloom of different species of Microcystis in Lake Neusiedl, Austria, were analyzed by gas chromatography and mass spectrometry. In open water diisopropyl disulfide and diisopropyl tri-sulfide were the only sulphur compounds to be found. It was shown that Microcystis flos-aquae was the causative agent for the generation of these sulphur compounds, since high concentrations of these substances were found both in the floating scum of cyanobacteria taken from open lake and in axenic cultures of five isolated strains of M. flos-aquae . Strains isolated from colonies of Microcystis aeruginosa were not able to synthesize isopropylthio compounds. Alternatively, methylthio compounds were released. The rather unusual formation of the isopropylthio group can be used as a chemical marker to differentiate between M. flos-aquae and M. aeruginosa as two separate species which hitherto have been regarded as formae. In a canal passing through the reed belt of Lake Neusiedl where Microcystis was missing, these compounds were not detected. Different sulfur compounds (dimethyl disulfide, dimethyl trisulfide, dibutyl sulfide and bis(methylthio) methane) which in part have not yet been reported for freshwater ecosystems occurred at this site. Their origin, however, remains obscure.     

Studies of the relationship between isoprene emission rate and CO2 or photon-flux density using a real-time isoprene analyser

Abstract. Studies of the isoprene emission rate in response to changes in photon-flux density and CO₂ partial pressure were conducted using a recently developed on-line isoprene analyser combined with a gas exchange system and chlorophyll fluorometer. Upon darkening, the isoprene emission rate from leaves of aspen ( Populus tremuloides Michaux.) began to decline immediately, demonstrating that the internal pool of isoprene, or its precursors, is small and that the instantaneous emission rate is tightly coupled to the rate of synthesis. A post-illumination burst of isoprene was observed within 5 min after darkening and lasted for 15–20 min in four isoprene-emitting species that were examined. In leaves of eucalyptus ( Eucalyptus globulus Labill.), the magnitude of the post-illumination burst was dependent on the photon-flux density that existed before darkening, but not on ambient CO₂ partial pressure. The dependence of the post-illumination burst on photon-flux density paralleled that for the steady-state rate of isoprene emission. A step-wise increase in intercellular CO₂ partial pressure from 24.5 to 60 Pa resulted in an immediate decrease in isoprene emission rate and non-photochemical fluorescence quenching, but an increase in CO₂ assimilation rate. Given the several recent studies that link isoprene emission to chloroplastic processes, the results of this study indicate that the linkage is not dependent on the rate of CO₂ flux through the reductive pentose phosphate pathway, but rather on more complex relationships involving metabolites not appreciably influenced by CO₂ partial pressure.     

Carbon isotope composition of CH4 from rice paddies in Japan

Carbon isotope ratios (¹³C) for bubble CH₄ in a submerged paddy soil were studied in Yokohama, Japan, throughout a growing period, and its variation was found. Bubble CH₄ collected from other 33 paddy fields in Japan was also measured for its ¹³C and the results agreed with Yokohama. Furthermore, the variation occurred irrespective of the amount and the type of supplied organic substances to the fields (whole rice straw, rice stubble, or compost). The ¹³C value (average value of -55.9 ± 4.24) from these paddy fields was higher than those of the CH₄ emitted from African and North American paddies. The higher value was little affected by their difference in the supplied organic substances. CH₄ oxidation likely occurs for bubble CH₄ in the shallow paddy fields. A rough estimate of the total CH₄ production, using isotope mass balance, showed that 17 to 22% of organic carbon supplied to Japanese paddies transforms to CH₄.     

Ethane production by Methanosarcina barkeri during growth in ethanol supplemented medium

Methanosarcina barkeri strain 227 produced ethane during growth on H₂/CO₂ when ethanol was added to the medium in concentrations of 89–974 mM; ethane production varied from 14 to 38 nmoles per tube (20 ml gas phase, 5.7 ml liquid) with increasing ethanol concentrations. Cells grown to mid-logarithmic phase (A₆₀₀ 0.46, protein = 64 g/ml) on H₂/CO₂, thoroughly flushed with H₂/CO₂, then exposed to ethanol, produced maximal ethane levels (at 585 and 974 mM ethanol) of about 215 nmoles per tube, with an ethane/methane ratio of 1×10^-3. Mid-logarithmic-phase cultures of Methanosarcina barkeri strain Fusaro also produced ethane (up to 20 nmoles per tube) when exposed to ethanol. Cultures of strain 227 growing on methanol in the absence of H₂ produced 6 nmoles per tube of ethane when supplemented with ethanol whereas those lacking ethanol but containing H₂ and/or methanol produced 1.6 nmoles per tube. Cultures of Methanococcus deltae strains LH and RC, Methanospirillum hungatei or Methanobacterium thermoautotrophicum produced 5 nmoles ethane per tube when grown in medium containing ethanol. Ethanol concentrations of 177–886 mM were inhibitory to growth of all methanogens examined. Production of ethane by Methanosarcina was inhibited by >62 mM methanol, and both methanogenic inhibitors tested, CCl₄ and Br–CH₂–CH₂–SO _inf3 ^sup- , inhibited ethane and methane production concurrently. The data suggest that ethanol is converted to ethane by Methanosarcina species using the terminal portion of the methanol-to-methane pathway.