Ecological interactions in Aedes species on Reunion Island

Two invasive, container‐breeding mosquito species, Aedes aegypti (Stegomyia aegypti) and Aedes albopictus (Stegomyia albopicta) (Diptera: Culicidae), have different distribution patterns on Reunion Island. Aedes albopictus occurs in all areas and Ae. aegypti colonizes only some restricted areas already occupied by Ae. albopictus. This study investigates the abiotic and biotic ecological mechanisms that determine the distribution of Aedes species on Reunion Island. Life history traits (duration of immature stages, survivorship, fecundity, estimated finite rate of increase) in Ae. aegypti and Ae. albopictus were compared at different temperatures. These fitness measures were characterized in both species in response to competitive interactions among larvae. Aedes aegypti was drastically affected by temperature, performing well only at around 25 °C, at which it achieved its highest survivorship and greatest estimated rate of increase. The narrow distribution of this species in the field on Reunion Island may thus relate to its poor ability to cope with unfavourable temperatures. Aedes aegypti was also more negatively affected by high population densities and to some extent by interactions with Ae. albopictus, particularly in the context of limited food supplies. Aedes albopictus exhibited better population performance across a range of environmental conditions. Its ecological plasticity and its superior competitive ability relative to its congener may further enhance its invasion success on Reunion Island.     

What Do We Know About Metal Recycling Rates?

The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end‐of‐life recycling rates (EOL‐RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in‐use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low‐cost (which thereby keeps down the price of scrap), many EOL‐RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL‐RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors.     

How do elevated CO2 and O3 affect the interception and utilization of radiation by a soybean canopy?

Net productivity of vegetation is determined by the product of the efficiencies with which it intercepts light (?_i) and converts that intercepted energy into biomass (?_c). Elevated carbon dioxide (CO₂) increases photosynthesis and leaf area index (LAI) of soybeans and thus may increase ?_i and ?_c; elevated O₃ may have the opposite effect. Knowing if elevated CO₂ and O₃ differentially affect physiological more than structural components of the ecosystem may reveal how these elements of global change will ultimately alter productivity. The effects of elevated CO₂ and O₃ on an intact soybean ecosystem were examined with Soybean Free Air Concentration Enrichment (SoyFACE) technology where large field plots (20‐m diameter) were exposed to elevated CO₂ (～550 μmol mol^?1) and elevated O₃ (1.2 × ambient) in a factorial design. Aboveground biomass, LAI and light interception were measured during the growing seasons of 2002, 2003 and 2004 to calculate ?_i and ?_c. A 15% increase in yield (averaged over 3 years) under elevated CO₂ was caused primarily by a 12% stimulation in ?_c , as ?_i increased by only 3%. Though accelerated canopy senescence under elevated O₃ caused a 3% decrease in ?_i, the primary effect of O₃ on biomass was through an 11% reduction in ?_c. When CO₂ and O₃ were elevated in combination, CO₂ partially reduced the negative effects of elevated O₃. Knowing that changes in productivity in elevated CO₂ and O₃ were influenced strongly by the efficiency of conversion of light energy into energy in plant biomass will aid in optimizing soybean yields in the future. Future modeling efforts that rely on ?_c for calculating regional and global plant productivity will need to accommodate the effects of global change on this important ecosystem attribute.     

Leaf micromorphology inAgathis and its taxonomic implications

This study surveys the micromorphological surface structure of the leaves of the conifer genusAgathis (Araucariaceae) from throughout the range of the genus (Malaysia to New Zealand and Fiji) as seen with the scanning electron microscope. These data confirm that the vegetative parts ofAgathis are taxonomically highly conservative, but suggest the Melanesian and New Zealand elements to be distinctive from those of the rest of the genus, and from one another. Conclusions are compared with those that have been derived from studies based on other characters.     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

Autumnal moth – why autumnal?

1. As for some other spring‐feeding moths, adult flight of Epirrita autumnata (Lepidoptera: Geometridae) occurs in late autumn. Late‐season flight is a result of a prolonged pupal period. Potential evolutionary explanations for this phenological pattern are evaluated. 2. In a laboratory rearing, there was a weak correlation between pupation date and the time of adult emergence. A substantial genetic difference in pupal period was found between two geographic populations. Adaptive evolution of eclosion time can thus be expected. 3. Metabolic costs of a prolonged pupal period were found to be moderate but still of some ecological significance. Pupal mortality is likely to form the main cost of the prolonged pupal period. 4. Mortality rates of adults, exposed in the field, showed a declining temporal trend from late summer to normal eclosion time in autumn. Lower predation pressure on adults may constitute the decisive selective advantage of late‐season flight. It is suggested that ants, not birds, were the main predators responsible for the temporal trend. 5. Egg mortality was estimated to be low; it is thus unlikely that the late adult period is selected for to reduce the time during which eggs are exposed to predators. 6. In a laboratory experiment, oviposition success was maximal at the time of actual flight peak of E. autumnata, however penalties resulting from sub‐optimal timing of oviposition remained limited.     

Effect of different larval rearing temperatures on the productivity (Ro) and morphology of the malaria vector Anopheles superpictus Grassi (Diptera: Culicidae) using geometric morphometrics

Temperature affects both the biology and morphology of mosquito vectors. Geometric morphometrics is a useful new tool for capturing and analyzing differences in shape and size in many morphological parameters, including wings. We have used this technique for capturing the differences in the wings of the malaria vector Anopheles superpictus, using cohorts reared at six different constant temperatures (15°, 20°, 25°, 27°, 30°, and 35° C) and also searched for potential correlations with the life tables of the species. We studied wing shape in both male and female adults, using 22 landmarks on the wing in relation to ecological parameters, including the development rate. The ecological zero was calculated as 9.93° C and the thermal constant as 296.34 day‐degrees. The rearing temperature affects egg, larval, and pupal development and also the total time from egg to adult. As rearing temperatures increased, longevity decreased in both sexes. In An. superpictus, R_o value and productivity correlated with the statistically significant gradual deformations in the wing shape related to size in both sexes. These deformations directly linked to differences in immature rearing temperatures. Analysis using PCA and UPGMA phenograms showed that although wings of females became narrower dorsoventrally as the temperature increased, they became broader in males. Comparisons of the wing landmarks indicated the medial part of the wing was most affected by larval rearing temperatures, showing relatively more deformations. Algorithmic values of the life tables were determined in correlation with the results of geometric morphometrics. Comparisons of centroid sizes in the cohorts showed that overall wing size became smaller in both sexes in response to higher rearing temperatures.     

Diet of the Indochinese silvered langur (Trachypithecus germaini) in Kien Luong Karst area,Kien Giang Province

The Indochinese silvered langur (Trachypithecus germaini) is distributed to the west of Mekong River in Cambodia, Lao PDR, Thailand and Vietnam. During a two‐year study, from May 2014 to May 2016, we collected 320.44 hr of behavior, with 17,040 feeding bouts recorded (142 hr) for T. germaini on Chua Hang Karst Mountain, Kien Luong District, Kien Giang Province, Vietnam. Feeding accounted for 45% of the Indochinese silvered langurs’ activity budget. The plant diet of the Indochinese silvered langurs was principally composed of young leaves (58%), followed by mature leaves (9.5%), fruits (22.7%), flowers (4.7%), buds (3.3%), petioles (1.2%), and other (0.5%). A total of 58 plant species were fed on by the silvered langurs, and leaves of eight species (Phyllathus reticulatus, Ficus rumphii, Ficus tinctoria, Ficus microcarpa, Cayratia trifolia, Streblus ilicifolia, Combretum latifolium, and Streblus asper) were fed on throughout the year. P. reticulatus was most frequently eaten (13.9% feeding time, n = 1,733). Food selection differed significantly between months and seasons. The Indochinese silvered langurs ate 27 plant species in the wet season compared with 23 plant species in the dry season. Leaf chemical composition of two food categories, 16 eaten species (with 10 most frequently consumed species and six least consumed species), and four noneaten species, were analyzed. Feeding samples from eaten species in the Indochinese silvered langurs's diet contained lower amounts of condensed tannin, lignin, protein, ash, and lipids, but a higher amount of total sugar compared with samples from noneaten species. Furthermore, the most frequently consumed species contained lower amounts of lignin compared with the less frequently consumed species. Using a generalized linear model with five variables, including neutral detergent fiber (NDF), total sugar, lignin, lipid, and calcium (Ca) indicated that NDF positively correlated and lignin content negatively correlated with feeding records in the diet of these langur.     

Internal lipid synthesis and vesicle growth as a step toward self-reproduction of the minimal cell

One of the major properties of the semi-synthetic minimal cell, as a model for early living cells, is the ability to self-reproduce itself, and the reproduction of the boundary layer or vesicle compartment is part of this process. A minimal bio-molecular mechanism based on the activity of one single enzyme, the FAS-B (Fatty Acid Synthase) Type I enzyme from Brevibacterium ammoniagenes, is encapsulated in 1-palmitoyl-2oleoyl-sn-glycero-3-phosphatidylcholine (POPC) liposomes to control lipid synthesis. Consequently molecules of palmitic acid released from the FAS catalysis, within the internal lumen, move toward the membrane compartment and become incorporated into the phospholipid bilayer. As a result the vesicle membranes change in lipid composition and liposome growth can be monitored. Here we report the first experiments showing vesicles growth by catalysis of one enzyme only that produces cell boundary from within. This is the prototype of the simplest autopoietic minimal cell.