Effect of root environment on proton efflux in wheat roots

Proton net efflux of wheat (Triticum aestivum L.) roots growing in sand culture or hydroponics was determined by measuring the pH values of the solution surrounding the roots by pH microelectrodes, by base titration and by color changes of a pH indicator in solid nutrient media. The proton net efflux was dependent on light, aeration, and source of nitrogen (NH ₄ ⁺ , NO ₃ ^? ). Ammonium ions caused the highest proton efflux, whereas nitrate ions decreased the proton efflux. Iron deficiency had no significant effect on proton efflux. Replacement of ammonium by nitrate inhibited proton efflux, whereas the reverse enhanced proton extrusion. A lag period between changes in plant environment and proton efflux was observed. The proton net efflux occurred at the basal portion of the roots but not in the root tips or at the elongation zone. Under optimal conditions, proton efflux capacity reached a maximum value of 5.7 μmole H⁺ g^?1 fresh weight h^?1 with an average (between different measurements) of 3.4 μmole H⁺ g^?1 fresh wth^?1 whereas the pH value decreased to 3.2–3.7 and reached a minimal value of 2.9. Inhibition of ATPase activity by orthovanadate inhibited proton efflux. The results indicate that proton efflux in wheat roots is ammonium ion and light dependent and probably governed by ATPase activity.     

The correlation between bismuth and uranyl staining and phosphorus content of intracellular structures as determined by electron spectroscopic imaging

Four groups of intracellular structures can be recognized according to bismuth and uranyl staining and phosphorus content. (1) Those which contain phosphorus and stain strongly with uranyl acetate but not with bismuth (ribosomes, heterochromatin and mature ribosomal precursor granules), presumably because of their nucleic acid content. (2) Those which contain phosphorus and stain with uranyl acetate and bismuth (interchromatin granules, immature ribosomal precursor granules and mitochondrial granules), presumably because at least some of their phosphate is available to react with bismuth. (3) Those which contain little phosphorus but which stain strongly with bismuth and weakly with uranyl acetate (Golgi complex beads), perhaps because some ligand in addition to phosphate reacts with bismuth, and (4) those which do not contain phosphorus and stain with neither uranyl acetate nor bismuth (portasomes). Uranyl staining correlates strongly with the phosphorus content of nucleic acids, proteins and inorganic deposits. Bismuth will stain some phosphorylated molecules but not all. Thus only some phosphates stain with bismuth.     

Immunological properties of low molecular-weight proteins binding heavy metals in rat kidney and liver

Two homogenous fractions of hepatic metallothioneins ((Cd,Zn) MT-1 and (Cd,Zn) MT-2) and renal metal binding proteins ((Bi,Cu) BP-1 and (Bi,Cu) BP-2) were isolated from rats exposed to heavy metals and specific antisera to them were produced in rabbits.These antisera were tested by immunodiffusion and immunoelectrophoresis for their ability to bind different fractions of hepatic Cd,Zn -metallothionein and renal (Bi,Cu)-, (Hg,Cu)- and (Cd,Cu)-binding proteins. It was found that anti (Bi,Cu) BP antisera did not cross-react with hepatic (Cd,Zn) MT-1 and (Cd,Zn) MT-2. Strong immunological cross-reactions were detected between anti (Bi,Cu) BP antisera and individual forms of (Cd,Cu)-, (Hg,Cu)- and (Bi,Cu)-binding proteins isolated from rat kidneys.     

Schistosoma mansoni: effects of antimony on immature and adult worms.

Immature Schistosoma mansoni in mice are less susceptible to antimony therapy than adult worms. KSb tartrate inhibited phosphofructokinase (PFK) (EC 2.7.1.11) to a greater extent in extracts of 3-week-old worms than adults, and inhibited production of lactate in both immature and adult worms in vitro. In vivo, KSb tartrate was accumulated similarly by 3-week-old worms and by adults: measurements of hexosephosphate following drug treatment suggested similar inhibition of PFK in the two worm stages. If antimony acts by inhibition of PFK it is not clear why the young worms are more resistant to chemotherapy than adults.     

High‐Efficiency Thermoelectric Power Generation Enabled by Homogeneous Incorporation of MXene in (Bi,Sb)2Te3 Matrix

The (Bi,Sb)₂Te₃ (BST) compounds have long been considered as the benchmark of thermoelectric (TE) materials near room temperature especially for refrigeration. However, their unsatisfactory TE performances in wide‐temperature range severely restrict the large‐scale applications for power generation. Here, using a self‐assembly protocol to deliver a homogeneous dispersion of 2D inclusion in matrix, the first evidence is shown that incorporation of MXene (Ti₃C₂T_x) into BST can simultaneously achieve the improved power factor and greatly reduced thermal conductivity. The oxygen‐terminated Ti₃C₂T_x with proper work function leads to highly increased electrical conductivity via hole injection and retained Seebeck coefficient due to the energy barrier scattering. Meanwhile, the alignment of Ti₃C₂T_x with the layered structure significantly suppresses the phonon transport, resulting in higher interfacial thermal resistance. Accordingly, a peak ZT of up to 1.3 and an average ZT value of 1.23 from 300 to 475 K are realized for the 1 vol% Ti₃C₂T_x/BST composite. Combined with the high‐performance composite and rational device design, a record‐high thermoelectric conversion efficiency of up to 7.8% is obtained under a temperature gradient of 237 K. These findings provide a robust and scalable protocol to incorporate MXene as a versatile 2D inclusion for improving the overall performance of TE materials toward high energy‐conversion efficiency.     

Boosting Superior Lithium Storage Performance of Alloy‐Based Anode Materials via Ultraconformal Sb Coating–Derived Favorable Solid‐Electrolyte Interphase

Alloy materials such as Si and Ge are attractive as high‐capacity anodes for rechargeable batteries, but such anodes undergo severe capacity degradation during discharge–charge processes. Compared to the over‐emphasized efforts on the electrode structure design to mitigate the volume changes, understanding and engineering of the solid‐electrolyte interphase (SEI) are significantly lacking. This work demonstrates that modifying the surface of alloy‐based anode materials by building an ultraconformal layer of Sb can significantly enhance their structural and interfacial stability during cycling. Combined experimental and theoretical studies consistently reveal that the ultraconformal Sb layer is dynamically converted to Li₃Sb during cycling, which can selectively adsorb and catalytically decompose electrolyte additives to form a robust, thin, and dense LiF‐dominated SEI, and simultaneously restrain the decomposition of electrolyte solvents. Hence, the Sb‐coated porous Ge electrode delivers much higher initial Coulombic efficiency of 85% and higher reversible capacity of 1046 mAh g^?1 after 200 cycles at 500 mA g^?1, compared to only 72% and 170 mAh g^?1 for bare porous Ge. The present finding has indicated that tailoring surface structures of electrode materials is an appealing approach to construct a robust SEI and achieve long‐term cycling stability for alloy‐based anode materials.     

锑矿废水影响下水库沉积物中细菌群落结构特征研究

【背景】水库沉积物中的微生物是水生态系统的重要组成部分,在沉积物物质循环中起重要作用。【目的】揭示含锑废水影响下水库表层沉积物中细菌群落结构特征及影响因子。【方法】基于Illumina高通量测序技术,对冷水沟水库表层沉积物细菌群落结构进行研究并分析其与沉积物理化性质的相关性;基于FAPROTAX软件对细菌功能进行预测分析。基于重金属污染负荷指数法评价水库重金属污染情况。【结果】高通量测序结果表明冷水沟水库的细菌群落较为丰富,主要由变形菌门(Proteobacteria,40.32%-20.19%)、拟杆菌门(Bacteroidetes,25.89%-4.44%)、脱硫杆菌(Desulfobacter,9.43%-2.02%)等81个门570个属组成。相关性分析表明,不同提取形态的锑及水溶态锑与多个不同分类水平下的细菌群落有显著的相关性。FAPROTAX软件对细菌功能进行预测,结果表明,化能异养功能细菌占优势(占总细菌的14.59%-23.58%),包括化能异养(Chemoheterotrophy)和需氧化能异养(Aerobic Chemoheterotrophy);此外,与碳、氮、硫元素循环有关的功能微生物以及人类病原致病微生物的相对丰度(占总细菌的12.42%-32.89%)也较高,这与水库的地理条件、周边环境及污染物类型有较大的相关性。重金属污染负荷指数法评价结果表明,水库范围重金属污染较重。【结论】研究区域受锑矿废水影响的水库(2015年建成蓄水)沉积物中细菌的群落以变形菌门(Proteobacteria)及拟杆菌门(Bacteroidetes)为最优势菌群,细菌功能主要以化能异养为主。     

Speciation of antimony in natural waters : the determination of Sb(III) and Sb(V) by continuous flow hydride generation-atomic absorption spectrometry

Abstract

A new procedure for the speciation of dissolved antimony is described. This makes use of complexation with citrate to prevent, preferentially, the formation of hydride from Sb(V) and allow the selective determination of Sb(III) to be made by continuous flow hydride generation - atomic absorption spectrometry. When the citric acid (12% m/V) is replaced by potassium iodide (3% m/V), total antimony is determined and the concentration of Sb(V) can be obtained by difference. The determination of the antimony species is dominated in this new procedure by the complexation of Sb(V) with citrate and the effect of pH is limited to a minor, re-inforcing role. This permits acidification to be made with hydrochloric acid. The principal interfering species in the determination of total antimony and Sb(III) is Fe³⁺, with Fe²⁺, Cu²⁺ and Ni²⁺ showing lesser effects on Sb(III). The technique is applied successfully to synthetic mixtures and to natural waters from the environment of a disused antimony mine.

The characteristic concentration obtained for antimony was 0.7 ng mL^–1 and the detection limit 1 ng mL^–1.