Development of a bioadhesive nanoformulation with Glycyrrhiza glabra L. extract against Candida albicans

Abstract

Glycyrrhiza glabra L. is considered an important source of bioactive compounds. This study aimed at the development of an efficient solution for the treatment of oral candidiasis. Several extracts of Glycyrrhiza glabra L. were prepared using different solvents and their potential in vitro antifungal activity was assessed. Ethanolic extracts showed the most promising results against C. albicans. This extract was incorporated into mucoadhesive nanoparticles (PLA, PLGA and alginate), which were further included in an oral gel, an oral film and a toothpaste, respectively. The results showed that nanoparticles were successfully produced, presenting a mean size among 100–900?nm with high encapsulation efficiency. In vitro studies showed that the most bioadhesive formulation was the oral film with extract-loaded PLGA nanoparticles, followed by the toothpaste with extract-loaded alginate nanoparticles and the oral gel with extract-loaded PLA nanoparticles.     

The byssus of the zebra mussel (Dreissena polymorpha): spatial variations in protein composition

The notorious biofouling organism Dreissena polymorpha (the zebra mussel) attaches to a variety of surfaces using a byssus, a series of protein threads that connect the animal to adhesive plaques secreted onto hard substrata. Here, the use of matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) to characterize the composition of different regions of the byssus is reported. All parts of the byssus show mass peaks corresponding to small proteins in the range of 3.7–7 kDa, with distinctive differences between different regions. Indeed, spectra from thread and plaques are almost completely non-overlapping. In addition, several peaks were identified that are unique to the interfacial region of the plaque, and therefore likely represent specialized adhesive proteins. These results indicate a high level of control over the distribution of proteins, presumably with different functions, in the byssus of this freshwater species.     

Hormonal interaction in sexual reproduction of Desmarestia aculeata (Phaeophyceae)

Male and female gametophytes of Desmarestia aculeata have been grown as clonal cultures. Red light permits vegetative growth only. Differentiation of oogonia and antheridia takes place under illumination with blue light as has been previously reported for several species of Laminaria. Morphological details for differentiation of oogonia and antheridia are presented, stressing the strong resemblance with the respective processes in Laminaria. Experimental evidence indicates the presence of a hormonal factor secreted by the eggs, which is responsible for discharge and subsequent attraction of spermatozoids to the egg.     

Characterization of the adhesive mucilages secreted by live diatom cells using atomic force microscopy

Atomic Force Microscopy (AFM) resolved the topography and mechanical properties of two distinct adhesive mucilages secreted by the marine, fouling diatom Craspedostauros australis. Tapping mode images of live cells revealed a soft and cohesive outer mucilage layer that encased most of the diatom's siliceous wall, and force curves revealed an adhesive force of 3.58 nN. High loading force, contact mode imaging resulted in cantilever 'cleaned' cell walls, which enabled the first direct observation of the active secretion of soft mucilage via pore openings. A second adhesive mucilage consisted of strands secreted at the raphe, a distinct slit in the silica wall involved in cell-substratum attachment and motility. Force measurements revealed a raphe adhesive strand(s) resistant to breaking forces up to 60 nN, and these strands could only be detached from the AFM cantilever probe using the manual stepper motor.     

THE COMPLEX POLYSACCHARIDES OF THE RAPHID DIATOM PINNULARIA VIRIDIS (BACILLARIOPHYCEAE)1

A combination of carbohydrate analysis and atomic force microscopy (AFM) was used to characterize the polysaccharides of the pennate diatom, Pinnularia viridis (Nitzsch) Ehrenberg. Polymeric substances were fractionated into those in the spent culture medium (SCM) and those sequentially extracted from the cells with water at 45° C (WW), NaHCO₃ containing EDTA at 95° C (HB), and 1 M NaOH containing NaBH₄ at 95° C. Carbohydrate, protein, and sulfate were detected in all the fractions, but their relative proportions differed significantly. Nineteen sugars were identified, including pentoses, hexoses, 6‐deoxyhexoses, O‐methylated sugars, aminohexoses, and traces of uronic acids. To some extent, the same constituent monosaccharides and a proportion of the linkage patterns occurred in all four fractions, indicating the fractions contained a spectrum of highly heterogeneous but structurally related polysaccharides. Several carbohydrates were enriched in specific fractions. A soluble, partially substituted, 3‐linked galactan was slightly enriched in the SCM. The WW fraction was highly enriched in 3‐linked glucan, presumably derived from chrysolaminaran. Chemical and AFM data for the WW and HB fractions indicated that compositional differences were associated with substantial changes in the morphology and properties of the cell surface mucilage. Soluble polymers relatively enriched in fucose conferred a degree of softness and compressibility to the mucilage, whereas most of the mucilage comprised firmer more gelatinous polymers comparatively enriched in rhamnose. The frustule residue dissolved during extraction with NaOH, and a partially substituted 3‐linked mannan, together with relatively large amounts of protein, was obtained.     

Formulating gels for decreased mucociliary transport using rheologic properties: Polyacrylic acids

The purpose of these studies was to identify the rheologic properties of polyacrylic acid gels necessary for optimal reductions in mucociliary clearance. The mucociliary transport of 2 bioadhesive polyacrylic acid polymers, polycarbophil and carbopol, was assessed in vitro by measuring their clerance rates across explants of ciliated bovine tracheal tissue. The viscoelastic properties of polymer gels were measured in the presence of mucus using controlled stress rheometry. Combinations of apparent viscosity (η) and complex modulus (G^*) were found to be the most useful parameters in the identification of polyacrylic acid formulations capable of decreasing mucociliary transport rate (MTR). A narrow range of η and G^* values suitable for reducing mucociliary clearance, while remaining sufficiently fluid for intranasal administration, were identified. The correlations between the rheologic parameters of the polycarbophil gels and their mucociliary transport rates were used to identify other polyacrylic acid gels that also had suitable mucociliary clearance properties, demonstrating that these parameters can be used to direct the optimization of formulations using simple in vitro rheologic testing. Published: April 20, 2007     

Evaluation of Polyethylene Oxide Compacts as Gastroretentive Delivery Systems

Compacts containing selected bioadhesive polymers, fillers, and binders were investigated for their potential as a bioadhesive gastroretentive delivery system to deliver water soluble and water insoluble compounds in the stomach. Compacts with 90:10, 75:25, and 60:40 of polyvinylpyrrolidone (PVP) and polyethylene oxide (PEO) were evaluated for swelling, dissolution, bioadhesion, and in vitro gastric retention. Compacts containing higher PEO showed higher swelling (111.13%) and bioadhesion (0.62 ± 0.03 N/cm²), and retained their integrity and adherence onto gastric mucosa for about 9 h under in vitro conditions. In vivo gastroretentive property of compacts were evaluated in Yorkshire cross swines. Compacts containing 58% PVP, 40% PEO and 2% of water soluble or water insoluble marker compounds showed gastroadhesive and retentive properties in vivo. It is concluded that PEO in combination with PVP yields a non disintegrating type bioadhesive dosage form which is suitable for gastroretentive applications. A part of this study has been presented at the Controlled Release Society’s symposium held at Vienna, 2006.     

Novel whole cell adhesion assays of three isolates of the fouling diatom Amphora coffeaeformis reveal diverse responses to surfaces of different wettability

Whole cell, strength of adhesion assays of three different isolates of the fouling diatom Amphora coffeaeformis were compared using a hydrophilic surface viz. acid washed glass (AWG), and a hydrophobic surface viz. a self assembled monolayer (SAM) of undecanethiol (UDT). Assays were performed using a newly designed turbulent flow channel that permits direct observation and recording of cell populations on a test surface. Exposure to continuous shear stress over 3 h revealed that the more motile isolate, WIL2, adhered much more strongly to both test surfaces compared to the other two strains. When the response of the isolates to shear stress after 3 h was compared, there was no significant difference in the percentage of cells removed, irrespective of surface wettability. Cells of the three isolates of A. coffeaeformis varied significantly in their response to different surfaces during initial adhesion, indicating the presence of a wide range of ‘physiological races’ within this species.     

The biology of biofouling diatoms and their role in the development of microbial slimes

Diatoms are a major component of microbial slimes that develop on man-made surfaces placed in the marine environment. Toxic antifouling paints, as well as environmentally friendly, fouling-release coatings, tend to be effective against most fouling organisms, yet fail badly to diatom slimes. Biofouling diatoms have been found to tenaciously adhere to and colonise even the most resistant of artificial surfaces. This review covers the basic biology of fouling marine diatoms, their mechanisms of adhesion and the nature of their adhesives, as well as documenting the various approaches that have been utilised to understand the formation and maintenance of diatom biofouling layers.     

Unusual adhesive production system in the barnacle Lepas anatifera: An ultrastructural and histochemical investigation

Adhesives that are naturally produced by marine organisms are potential sources of inspiration in the search for medical adhesives. Investigations of barnacle adhesives are at an early stage but it is becoming obvious that barnacles utilize a unique adhesive system compared to other marine organisms. The current study examined the fine structure and chemistry of the glandular system that produces the adhesive of the barnacle Lepas anatifera. All components for the glue originated from large single‐cell glands (70–180 μm). Staining (including immunostaining) showed that L ‐3,4‐dihydroxyphenylalanine and phosphoserine were not present in the glue producing tissues, demonstrating that the molecular adhesion of barnacles differs from all other permanently gluing marine animals studied to date. The glandular tissue and adhesive secretion primarily consisted of slightly acidic proteins but also included some carbohydrate. Adhesive proteins were stored in cytoplasmic granules adjacent to an intracellular drainage canal (ICC); observations implicated both merocrine and apocrine mechanisms in the transport of the secretion from the cell cytoplasm to the ICC. Inside the ICC, the secretion was no longer contained within granules but was a flocculent material which became “clumped” as it traveled through the canal network. Hemocytes were not seen within the adhesive “apparatus” (comprising of the glue producing cells and drainage canals), nor was there any structural mechanism by which additions such as hemocytes could be made to the secretion. The unicellular adhesive gland in barnacles is distinct from multicellular adhesive systems observed in marine animals such as mussels and tubeworms. Because the various components are not physically separated in the apparatus, the barnacle adhesive system appears to utilize completely different and unknown mechanisms for maintaining the liquid state of the glue within the body, as well as unidentified mechanisms for the conversion of extruded glue into hard cement. J. Morphol., 2012. © 2012 Wiley Periodicals, Inc.