MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

The influence of selected steroid hormones on the physicochemical behaviour of DPPC liposomes

The physicochemical properties of DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) liposomes used for topical application are pharmaceutically important. Therefore the aim of our study was to establish rapid and efficient methods for the exact characterisation of the physicochemical properties of extruded DPPC liposomes containing low concentration (0.5%, w/w) of different, therapeutically interesting steroid hormones, named 17-beta-estradiol, cpa (cyproterone acetate) and finasteride. In a first step it could be shown that all drugs influenced the liposome size and changed the zeta potential compared to the placebo formulations. Our further analytical strategy was to use micro-calorimetry and ATR-FTIR (Fourier transformed infrared spectroscopy), two powerful and non-destructive methods to confirm the drug incorporation into the liposomes by proving interactions between the phospholipids and the steroids. Thereby it was even possible to localize the location of interaction. The characteristic phase transition temperatures of the phospholipid were decreased by the hormones which was detected by micro-DSC (differential scanning calorimetry). The results of the ATR-FTIR measurements indicated shifts of the specific lipid peaks, the C=O stretching bands and PO(2)(-) antisymmetric double stretching band, in the gel and liquid crystalline phase. A polar as well as a non-polar interaction could be proven. It could be shown that the investigated steroid hormones changed the physical properties of the phospholipid bilayers.     

Determination of the minimal fusion peptide of bovine leukemia virus gp30

In this study, we determined the minimal N-terminal fusion peptide of the gp30 of the bovine leukemia virus on the basis of the tilted peptide theory. We first used molecular modelling to predict that the gp30 minimal fusion peptide corresponds to the 15 first residues. Liposome lipid-mixing and leakage assays confirmed that the 15-residue long peptide induces fusion in vitro and that it is the shortest peptide inducing optimal fusion since longer peptides destabilize liposomes to the same extent but not shorter ones. The 15-residue long peptide can thus be considered as the minimal fusion peptide. The effect of mutations reported in the literature was also investigated. Interestingly, mutations related to glycoproteins unable to induce syncytia in cell-cell fusion assays correspond to peptides predicted as non-tilted. The relationship between obliquity and fusogenicity was also confirmed in vitro for one tilted and one non-tilted mutant peptide.     

Investigation of the structure and proteolytic activity of papain in aqueous miscible organic media

The stability of papain was studied in aqueous-organic mixtures by means of residual proteolytic activity along with various spectroscopic analyses (fluorescence and ATR-FTIR combined with isotopic exchange with D₂O). The investigated systems contained 1 or 10% (v/v) of an aqueous buffered solution (pH 8.0) in acetonitrile (ACN), methanol (MeOH) or dimethyl formamide (DMF). The results evidenced that papain retained almost all its catalytic activity after 24 h of incubation in the presence of ACN, and a more compact conformation of the enzyme was detected. Papain suffered an important loss of enzymatic activity (ca. 80%) after 24 h incubation in MeOH although, no global conformational change and minor secondary structure rearrangements were detected. This observation suggests that somehow the active site region was altered. On the other hand, papain suffered a complete inactivation when exposed to those media containing DMF. Fluorescence analyses revealed that an irreversible conformational change took place after 24 h incubation, and a moderate increase in β-sheet and β-turn structures was the most relevant finding when secondary structure was analyzed. The evidences demonstrated that the organic solvents induce a more rigid and compact structure of papain regardless of the organic:buffer ratio investigated. In turn, these modifications affect the active catalytic site in the particular case of MeOH and DMF. These findings were in agreement with the thermo-stability of the enzyme performed after heating at 353 K in all the studied media, that is the presence of ACN did not substantially affect the secondary structure of papain. Nevertheless, the α-helix domain demonstrated to be less thermally stable than the β-sheet domain, turning into aggregated structures after heating, especially in the presence of MeOH and DMF.     

Design and Characterization of an Adhesive Matrix Based on a Poly(Ethyl Acrylate, Methyl Methacrylate)

The main issue in the development of transdermal patches made of poly(ethyl acrylate, methyl methacrylate) (Eudragit NE 40D, PMM) is the shrinkage phenomenon during the spreading of the latex onto the release liner. To solve this problem, the latex is usually freeze-dried and then re-dissolved in an organic solvent (method 1). To simplify the production process, we prepared an adhesive matrix by adding to the commercial PMM latex a plasticizer and an additive (anti-shrinkage agent) that avoids the shrinkage of the water dispersion spread onto the release liner (method 2). In some cases the active ingredient itself, such as potassium diclofenac (DK) and nicotine (NT), works as anti-shrinkage agent. In this work, the effects of the preparation method, types and concentrations of the plasticizer (triacetin and tributyl citrate) on the adhesive properties of the transdermal patches were investigated. The adhesive properties of the prepared patch were determined by texture analysis, peel adhesion test and shear adhesion. The PMM/plasticizer interactions were evaluated by ATR-FTIR spectroscopy. Furthermore, the in vitro skin permeation profiles of DK and NT released from the patch were determined by Franz cell method. Generally speaking, the variables that mainly modify the adhesive properties are the concentration and type of the plasticizer. The skin permeation profiles of DK and NT from the patch prepared by method 2 overlapped with those obtained with the commercial products. The results underline that the PMM latex can be used conveniently in the development of transdermal patches.     

Glyphosate complexation to aluminium(III). An equilibrium and structural study in solution using potentiometry, multinuclear NMR, ATR-FTIR, ESI-MS and DFT calculations

The stoichiometries and stability constants of a series of Al³⁺-N-phosponomethyl glycine (PMG/H₃L) complexes have been determined in acidic aqueous solution using a combination of precise potentiometric titration data, quantitative ²⁷Al and ³¹P NMR spectra, ATR-FTIR spectrum and ESI-MS measurements (0.6 M NaCl, 25 °C). Besides the mononuclear AlH₂L²⁺, Al(H₂L)(HL), and Al(HL)L²⁻, dimeric Al₂(HL)L⁺ and trinuclear complexes have been postulated.¹H and ³¹P NMR data show that different isomers co-exist in solution and the isomerization reactions are slow on the ³¹P NMR time scale. The geometries of monomeric and dimeric complexes likely double hydroxo bridged and double phosphonate bridged isomers have been optimized using DFT ab initio calculations starting from rational structural proposals. Energy calculations using the PCM solvation method also support the co-existence of isomers in solutions.     

The Effect of Maillard Conjugation of Deamidated Wheat Proteins with Low Molecular Weight Carbohydrates on the Secondary Structure of the Protein

A soluble isolated wheat protein fraction (sIWP) prepared from isolated wheat protein (30–35% deamidation) was incubated alone or in the presence of glucose or maltodextrins of various molecular weights (MW 1, 1.9 and 4.3 kDa) at 60 °C and 75% relative humidity to promote the formation of Maillard conjugates. The formation of Maillard conjugates was confirmed by the loss of available -NH₂ groups on incubation. Approximately 3–4 carbohydrate moieties (glucose or low molecular weight carbohydrates in the commercial maltodextrin) were attached per mole of sIWP after 24 h incubation. Principal component analysis of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra measured in the dry state showed that there were no major structural changes among non-incubated sIWP, sIWP incubated alone, sIWP–glucose conjugate and sIWP–maltodextrin (MW 1 kDa) conjugate. Structural changes were observed when the protein was incubated with larger molecular weight maltodextrin (MW 1.9 kDa or 4.3 kDa). However, there were no detectable differences in their circular dichroism (CD) spectra suggesting the absence of conformational changes in proteins with or without attached carbohydrates in solution state. The differences between the FTIR and CD results are possibly due to differences in water content of the samples although pressure-induced changes to protein structure induced in the ATR cell and the influence of unreacted maltodextrins cannot be discounted. Attachment of low molecular weight carbohydrate moieties on a relatively large molecular weight protein (i.e. sIWP with average MW of 40.4 kDa) with low lysine content (average three per mole of protein) is not sufficient to have an impact on the secondary structure of the protein.     

Structural and functional characterization of simvastatin-induced myotoxicity in different skeletal muscles

Background

Statins are the most commonly used drugs for the treatment of hypercholesterolemia. Their most frequent side effect is myotoxicity. To date, it remains unclear whether statins preferentially induce myotoxicity in fast- or in slow-twitch muscles. Therefore, we investigated these effects on fast- (extensor digitorum longus; EDL), slow- (soleus; SOL), and mixed-twitch muscles (diaphragm; DIA) in rats by comparing their contractile and molecular structural properties.

Methods

Simvastatin-induced functional changes were determined by muscle contraction measurements, and drug-induced molecular changes were investigated using Fourier transform infrared (FTIR) and attenuated total reflectance (ATR) FTIR spectroscopy.

Results

With simvastatin administration (30 days, 50 mg/kg), a depression in the force–frequency curves in all muscles was observed, indicating the impairment of muscle contractility; however, the EDL and DIA muscles were affected more severely than the SOL muscle. Spectroscopic findings also showed a decrease in protein, glycogen, nucleic acid, lipid content and an increase in lipid order and lipid dynamics in the simvastatin-treated muscles. The lipid order and dynamics directly affect membrane thickness. Therefore, the kinetics and functions of membrane ion channels were also affected, contributing to the statin-induced impairment of muscle contractility. Furthermore, a reduction in α-helix and β-sheet and an increase in random coil, aggregated and antiparallel β-sheet were observed, indicating the protein denaturation. Spectral studies showed that the extent of molecular structural alterations in the muscles following simvastatin administration was in the order EDL > DIA > SOL.

Conclusions

Simvastatin-induced structural and functional alterations are more profound in the fast-twitch than in the slow-twitch muscles.

General significance

Myotoxic effects of simvastatin are primarily observed in the fast-twitch muscles.     

Organic solvents mediate self-assembly of GAV-9 peptide on mica surface

Self-assembly of peptides into fibrils and other morphologies has attracted much attention inmany fields,especially in nanofabrication,pathology and biochemistry.In this paper,self-assembly of GAV-9peptide in organic solvents,ethanol and acetone,was investigated using atomic force microscopy(AFM)and attenuated total reflectance-Fourier transform infrared spectroscopy(ATR-FTIR).The results indicatedthat GAV-9 self-assembled into various nanostructures in both solvents after deposited and evaporated onmica.Fibrils with β-sheet conformation were observed in both solvents when the peptide concentrationwas higher than 280 μM.However,ordered fibrils with β-sheet conformation were formed in ethanol,butnot in acetone,with a peptide concentration ranging from 7 μM to 28 μM.We attribute the formation ofvarious nanostructures to the different physicochemical properties of the polar organic solvents on the self-assembly of GAV-9 peptide.     

New protocol for the rapid quantification of exopolysaccharides in continuous culture systems of acidophilic bioleaching bacteria

In this study, we investigate exopolysaccharide production by a bacterial consortium during the bioleaching of a cobaltiferrous pyrite. Whereas comparable studies have looked at exopolysaccharide production in batch systems, this study focuses on a continuous system comprising a series of four stirred bioreactors and reveals the difficulties in quantifying biomolecules in complex media such as bioleached samples. We also adapted the phenol/sulphuric acid method to take into account iron interference, thus establishing a new protocol for sugar quantification in bioleached samples characterised by low pH (1.4) and high iron concentration (2 g l⁻¹). This allows sugar analysis without any prior sample preparation step; only a small amount of sample is needed (0.5 ml) and sample preparation is limited to a single filtration step. We found that free exopolysaccharides represented more than 80% of the total sugars in the bioreactors, probably because stirring creates abrasive conditions and detaches sugars bound to pyrite or bacteria and that they were produced mainly in the first two reactors where bioleaching activity was greatest. However, we could not establish any direct link between the measured exopolysaccharide concentration and bioleaching activity. Exopolysaccharides could have another role (protection against stress) in addition to that in bacterial attachment.