Galectin-1-Induced Autophagy Facilitates Cisplatin Resistance of Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC) is one of the most common cancers in Taiwan. Although chemotherapy is the primary treatment for HCC patients, drug resistance often leads to clinical failure. Galectin-1 is a beta-galactoside binding lectin which is up-regulated in HCC patients and promotes tumor growth by mediating cancer cell adhesion, migration and proliferation, but its role in chemoresistance of HCC is poorly understood. In this study we found that galectin-1 is able to lead to chemoresistance against cisplatin treatment, and subsequent inhibition has reversed the effect of cell death in HCC cells. Moreover, galectin-1 was found to induce autophagic flux in HCC cells. Inhibition of autophagy by inhibitors or knockdown of Atg5 cancels galectin-1-induced cisplatin resistance in HCC cells. Increase of mitophagy triggered by galectin-1 was found to reduce the mitochondrial potential loss and apoptosis induced by cisplatin treatment. Finally, using an in situ hepatoma mouse model, we clearly demonstrated that inhibition of galectin-1 by thiodigalactoside could significantly augment the anti-HCC effect of cisplatin. Taken together, our findings offer a new insight into the chemoresistance galectin-1 causes against cisplatin treatment, and points to a potential approach to improve the efficacy of cisplatin in the treatment of HCC patients.     

Abundant alkali-sensitive sites in DNA of human and mouse sperm

The DNA of human and mouse sperm cells was analyzed by single-cell microgel electrophoresis, by agarose gel electrophoresis, and by alkaline elution--three techniques that can detect single-strand DNA breaks and/or labile sites. Under these conditions a surprisingly large number of single-strand DNA breaks, approximately 10(6) to 10(7) per genome, were detected in human and mouse sperm but not in human lymphocytes or in mouse bone marrow cells. These breaks were also present in chicken erythrocyte DNA, which is also highly condensed. These breaks were not observed under neutral pH conditions nor under denaturing conditions not involving alkali, suggesting that these sites are alkali-sensitive and do not represent preexisting single-strand breaks. The high frequency of such sites in sperm from healthy mouse and human donors suggests that they represent a functional characteristic of condensed chromatin rather than DNA damage.     

Storage of pollen grains of Crotalaria retusa in oils

Summary Attempts were made to store pollen grains of Crotalaria retusa L. in a mineral oil (paraffin oil) and two vegetable oils (soybean oil and olive oil). Under laboratory conditions pollen grains not stored in oil lost in vitro germinability within 15–30 days, while those stored in oils maintained some degree of germinability even after 60 days. Pollen samples stored in oils at –20° C did not show any decline in germinability or pollen tube vigour even after 6 months of storage. The results amply demonstrate the feasibility of using oils for short- and long-term pollen storage.     

Effect of dietary aflatoxin B1 on the growth response and haematologic changes of young Japanese quail

Feeding of aflatoxin B₁ at the rate of 0.5 ppm to young Japanese quail resulted in significant (p<0.01) decrease in body weight gain that became apparent on the third week. There was no significant difference in the mean values of haemoglobin, packed cell volume and total erythrocyte counts of quail chicks given aflatoxin B₁ in feed in comparison to those fed on a similar diet without aflatoxin. However, the total leucocyte count revealed an increase on the third week which was due to an increase in the percentage of heterophils and decrease in lymphocytes.     

Shift in product formation from acetate to ethanol using metabolic inhibitors inFusarium oxysporum

Summary Fusarium oxysporum 841 produces a mixture of ethanol and acetic acid from glucose, xylose or Avicel (microcrystalline cellulose) substrates. Some metabolic inhibitors viz. sodium azide, dinitrophenol and polyethylene glycol were used for shifting product formation from acetic acid to ethanol. Using these inhibitors 1.5- to 2- fold increase in ethanol production was achieved with significant repression (by 80 to 90%) of acetic acid. Almost theoretical yields of ethanol were obtained.     

Formation of acetic acid from cellulosic substrates byFusarium oxysporum

Summary Four strains of Fusarium oxysporum and a strain of Monilia brunnae were screened for their ability to convert cellulosic substrates into ethanol/acetic acid. These strains were found to utilize cellulose and produce extracellular cellulases. However, only F. oxysporum 841 was found to convert glucose, xylose, and cellulose into ethanol and acetic acid as major end-products under microaerobic conditions. Acetic acid at a level of 4.7 g/l resulted in a single-step process on potato pulp medium, indicating the potential of the strain for converting cellulosic substrates into acetic acid. Offprint requests to: K. Schügerl     

Studies on clinical signs and haematological alterations in pneumonic aspergillosis due to Aspergillus flavus in Japanese quail

Intratracheal inoculation of 2-week old quail chicks with Aspergillus flavus spores resulted in the development of clinical signs within 24 h of infection. These were characterized by dullness, depression, anorexia, accelerated breathing, gasping and prostration leading to death. These signs continued up to 7 days followed by considerable decrease in the intensity of the symptoms as well as number of birds showing clinical signs. Mortality occurred primarily in the first week with a majority of the birds dying from 2–4 days after infection. The overall mortality during a 6-week observation period was 25%. The average body weight of the infected chicks was slightly lower than that of controls; the difference being significant at 2, 3 and 42 days post-infection. There was no appreciable difference in the mean values of haemoglobin, packed cell volume and total erythrocyte count between the infected and control chicks at any stage of infection, but total leucocyte count revealed a significant increase (p<0.05) from 3–7 days post-infection. This was due to increase in the percentage of heterophils and decrease in lymphocytes.     

Solubilization of an Adenosine Uptake Site in Brain

Procedures are described for the solubilization of adenosine uptake sites in guinea pig and rat brain tissue. Using [3H]nitrobenzylthioinosine [( 3H]NBI) the solubilized site is characterized both kinetically and pharmacologically. The binding is dependent on protein concentration and is saturable, reversible, specific, and high affinity in nature. The KD and Bmax of guinea pig extracts are 0.13 +/- 0.02 nM and 133 +/- 18 fmol/mg protein, respectively, with linear Scatchard plots obtained routinely. Similar kinetic parameters are observed in rat brain. Adenosine uptake inhibitors are the most potent inhibitors of [3H]NBI binding with the following order of potency, dilazep greater than hexobendine greater than dipyridamole. Adenosine receptor ligands are much less potent inhibitors of binding, and caffeine is without effect. The solubilized adenosine uptake site is, therefore, shown to have virtually identical properties to the native membrane site. The binding of the adenosine A1 receptor agonist [3H]cyclohexyladenosine [( 3H]CHA) to the solubilized brain extract was also studied and compared with that of [3H]NBI. In contrast to the [3H]NBI binding site [3H]CHA binds to two apparent populations of adenosine receptor, a high-affinity site with a KD of 0.32 +/- 0.06 nM and a Bmax of 105 +/- 30 fmol/mg protein and a lower-affinity site with a KD of 5.50 +/- 0.52 nM and Bmax of 300 +/- 55 fmol/mg protein. The pharmacology of the [3H]CHA binding site is consistent with that of the adenosine receptor and quite distinct from that of the uptake [( 3H]NBI binding) site. Therefore, we show that the adenosine uptake site can be solubilized and that it retains both its binding and pharmacologic properties in the solubilized state.     

Prediction and comparison of the secondary structure of legume lectins

Secondary structure prediction for the 4 legume lectins: Concanavalin A, soybean agglutinin, favabean lectin and lentil lectin, was done by the method of Chou and Fasman. This prediction shows that these four lectins fall into a structurally distinct class of proteins, containing high amounts of β-sheet and β-turns. There is a notable similarity in the gross structure of these proteins; all four of them contain about 40–50% of β-sheet, 35–45 % β-turn and 0–10% of α-helix. When the secondary structure of corresponding residues in each pair of these lectins was compared, there was a striking similarity in the Concanavalin A-soybean agglutinin and favabean lectin-lentil lectin pairs, and considerably less similarity in the other pairs, suggesting that these legume lectins have probably evolved in a divergent manner from a common ancestor. A comparison of the predicted potential β-turn sites also supports the hypothesis of divergent evolution in this class of lectins.     

On the computation of the tertiary structure of globular proteins—IV. Use of secondary structure information

The distance geometry approach for computing the tertiary structure of globular proteins emphasized in this series of papers (Goelet al., J. theor. Biol. 99, 705–757, 1982) is developed further. This development includes incorporation of some secondary structure information—the location of alpha helices in the primary sequence—in the algorithm to compute the tertiary structure of alpha helical globular proteins. An algorithm is developed which estimates the interresidue distances between chain-proximate helices. These distances, in conjunction with the global statistical average distances obtainable from a database of real proteins and determined by the primary sequence of the protein under study, are used to determine the tertiary structure. Five proteins, parvalbumin, hemerythrin, human hemoglobin, lamprey hemoglobin, and sperm whale myoglobin, are investigated. The root mean square (RMS) errors between the calculated structures and those determined by X-ray diffraction range from 4.78 to 7.56 Å. These RMSs are 0.21–2.76 Å lower than those estimated without the secondary structure information. Contact maps and three-dimensional backbone representations also show considerable improvements with the introduction of secondary structure information.