Joint Report of the First International Comparison Test on Swine Lymphocyte Alloantigens (SLA)

The first international comparison test on swine lymphocyte alloantigens (SLA) was held in Helsinki, Finland in July 1986. The results reported were based on a comparison of 157 alloantisera originating from six laboratories. The antisera were tested against a selected panel of 264 lymphocyte samples belonging to four laboratories. The most common breeds in Europe were chosen for this first comparison test (Landrace and Large White). Eighteen of the 31 previously known specificities were confirmed and a new nomenclature was established.     

Fruit structure of Amborella trichopoda (Amborellaceae)

The indehiscent fruitlets of the apparently basalmost extant angiosperm, Amborella trichopoda, have a pericarp that is differentiated into five zones, a thin one‐cell‐layered skin (exocarp), a thick fleshy zone of 25–35 cell layers (outer mesocarp), a thick, large‐celled sclerenchymatous zone (unlignified) of 6–18 cell layers (middle mesocarp), a single cell layer with thin‐walled (silicified?) cells (inner mesocarp), and a 2–4‐cell‐layered, small‐celled sclerenchymatous zone (unlignified) derived from the inner epidermis (endocarp). The border between inner and outer mesocarp is not even but the inner mesocarp forms a network of ridges and pits; the ridges support the vascular bundles, which are situated in the outer mesocarp. In accordance with previous observations by Bailey & Swamy, no ethereal oil cells were observed in the pericarp; however, lysigenous cavities as mentioned by these authors are also lacking; they seem to be an artefact caused by re‐expanding dried fruits. The seed coat is not sclerified. The fruitlets of Amborella differ from externally similar fruits or fruitlets in other basal angiosperms, such as Austrobaileyales or Laurales, in their histology. © 2005 The Linnean Society of London, Botanical Journal of the Linnean Society, 2005, 148 , 265–274.     

Synthesis,characterization and in vitro activity of a surface-attached antimicrobial cationic peptide

Infection associated with implanted biomaterials is common and costly and such infections are extremely resistant to antibiotics and host defenses. Consequently, there is a need to develop surfaces which resist bacterial adhesion and colonization. The broad spectrum synthetic cationic peptide melimine has been covalently linked to a surface via two azide linkers, 4-azidobenzoic acid (ABA) or 4-fluoro-3-nitrophenyl azide (FNA), and the resulting surfaces characterized by X-ray photoelectron spectroscopy and contact angle measurements. The quantity of bound peptide was estimated by a modified Bradford assay. The antimicrobial efficacy of the two melimine-modified surfaces against Pseudomonas aeruginosa and Staphylococcus aureus was compared by scanning electron microscopy (SEM) and fluorescence microscopy. Attachment of melimine via ABA gave an approximately 4-fold greater quantity of melimine bound to the surface than attachment via FNA. Surfaces melimine-modified by either attachment strategy showed significantly reduced bacterial adhesion for both strains of bacteria. P. aeruginosa exposed to ABA–melimine and FNA–melimine surfaces showed marked changes in cell morphology when observed by SEM and a reduction of approximately 15-fold (p < 0.001) in the numbers of adherent bacteria compared to controls. For the ABA–melimine surface there was a 33% increase in cells showing damaged membranes (p = 0.0016) while for FNA–melimine there was no significant difference. For S. aureus there were reductions in bacterial adhesion of approximately 40-fold (p < 0.0001) and 5-fold (p = 0.008) for surfaces modified with melimine via ABA or FNA, respectively. There was an increase in cells showing damaged membranes on ABA–melimine surfaces of approximately 87% (p = 0.001) compared to controls, while for FNA–melimine there was no significant difference observed. The data presented in this study show that melimine has excellent potential for development as a broad spectrum antimicrobial coating for biomaterial surfaces. Further, it was observed that the efficacy of antimicrobial activity is related to the method of attachment.     

Efficient clustering in collaborative filtering recommender system: Hybrid method based on genetic algorithm and gravitational emulation local search algorithm

The ultimate goal of the Recommender System (RS) is to offer a proposal that is very close to the user's real opinion. Data clustering can be effective in increasing the accuracy of production proposals by the RS. In this paper, single-objective hybrid evolutionary approach is proposed for clustering items in the offline collaborative filtering RS. This method, after generating a population of randomized solutions, at each iteration, improves the population of solutions first by Genetic Algorithm (GA) and then by using the Gravitational Emulation Local Search (GELS) algorithm. Simulation results on standard datasets indicate that although the proposed hybrid meta-heuristic algorithm requires a relatively high run time, it can lead to more appropriate clustering of existing data and thus improvement of the Mean Absolute Error (MAE), Root Mean Square Error (RMSE) and Coverage criteria.     

通往风景园林行业的BIM之路——数字化竖向设计教育

随着全球建造业向数字化全面转型,建筑信息模型（BIM)的教学将是未来几年风景园林设计与实施的重要主题。介绍了风景园林专业BIM的教学方法和数字化竖向设计及其应用在BIM场地设计项目中的重要性。数字化竖向设计是实现BIM的途径。风景园林教育必须在其教学中讲解BIM建模方法和过程。     

Determination of sulpiride in pharmaceutical preparations and biological fluids using a Cr (III) enhanced chemiluminescence method

A highly sensitive and simple method for identifying sulpiride in pharmaceutical formulations and biological fluids is presented. The method is based on increased chemiluminescence (CL) intensity of a luminol–H₂O₂ system in response to the addition of Cr (III) under alkaline conditions. The CL intensity of the luminol–H₂O₂–Cr (III) system was greatly enhanced by the addition of sulpiride and the CL intensity was proportional to the concentration of sulpiride in a sample solution. Various parameters affecting the CL intensity were systematically investigated and optimized for determination of the sulpiride in a sample. Under the optimum conditions, the CL intensity was proportional to the concentration of sulpiride in the range of 0.068–4.0 µg/mL, with a good correlation coefficient of 0.997. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 8.50 × 10^‐6 µg/mL and 2.83 × 10^‐5 µg/mL, respectively. The method presented here produced good reproducibility with a relative standard deviation (RSD) of 2.70% (n = 7). The effects of common excipients and metal ions were studied for their interference effect. The method was validated statistically through recovery studies and successfully applied for the determination of sulpiride in pure form, pharmaceutical preparations and spiked human plasma samples. The percentage recoveries were found to range from 99.10 to 100.05% for pure form, 98.12 to 100.18% for pharmaceutical preparations and 97.9 to 101.4% for spiked human plasma. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of the vacuolar Na<Superscript>+</Superscript>/H<Superscript>+</Superscript> antiporter transgene in a rice landrace and a commercial rice cultivar after its insertion by crossing

The vacuolar Na⁺/H⁺ antiporter is known to alleviate saline stress by sequestering Na⁺ in both wild-type Arabidopsis and rice and when over-expressed in many transgenic plants. Here we report on the effect of the NHX1 transgene on the salt tolerance properties it confers to a rice landrace and a commercial cultivar suitable for the dry winter season, but which suffers loss due to seasonal stresses, particularly in the coastal areas. The Nipponbare Na⁺/H⁺ antiporter 1.9 kb cDNA was cloned into pCAMBIA1305.1 under the control of the CaMV35S promoter and transformed into tissue-culture-responsive rice landrace Binnatoa (BA). The best-expressing transgenic line at T₂ was found to be significantly tolerant at the seedling stage and was advanced to T₃. The transgene was then transferred to the tissue-culture recalcitrant farmer-popular commercial rice genotype, BRRIdhan 28 (BR28) by crossing. The data generated both from semi-quantitative RT-PCR and western blot hybridization revealed that the transgene showed similar expression in the crossbred BR28 plants and BA transgenic line. Comparative stress tolerance tests, however, revealed that the BR28 crossbred lines were significantly less tolerant than its transgenic parent BA at both seedling and reproductive stages. A single successful transgenic event may therefore not show the same performance in the recipient genetic background, if introgressed by crossing.     

Simplified three-dimensional culture system for long-term expansion of embryonic stem cells

AIM: To devise a simplified and efficient method for long-term culture and maintenance of embryonic stem cells requiring less frequent passaging.METHODS: Mouse embryonic stem cells (ESCs) labeled with enhanced yellow fluorescent protein were cultured in three-dimensional (3-D) self-assembling scaffolds and compared with traditional two-dimentional (2-D) culture techniques requiring mouse embryonic fibroblast feeder layers or leukemia inhibitory factor. 3-D scaffolds encapsulating ESCs were prepared by mixing ESCs with polyethylene glycol tetra-acrylate (PEG-4-Acr) and thiol-functionalized dextran (Dex-SH). Distribution of ESCs in 3-D was monitored by confocal microscopy. Viability and proliferation of encapsulated cells during long-term culture were determined by propidium iodide as well as direct cell counts and PrestoBlue (PB) assays. Genetic expression of pluripotency markers (Oct4, Nanog, Klf4, and Sox2) in ESCs grown under 2-D and 3-D culture conditions was examined by quantitative real-time polymerase chain reaction. Protein expression of selected stemness markers was determined by two different methods, immunofluorescence staining (Oct4 and Nanog) and western blot analysis (Oct4, Nanog, and Klf4). Pluripotency of 3-D scaffold grown ESCs was analyzed by in vivo teratoma assay and in vitro differentiation via embryoid bodies into cells of all three germ layers.RESULTS: Self-assembling scaffolds encapsulating ESCs for 3-D culture without the loss of cell viability were prepared by mixing PEG-4-Acr and Dex-SH (1:1 v/v) to a final concentration of 5% (w/v). Scaffold integrity was dependent on the degree of thiol substitution of Dex-SH and cell concentration. Scaffolds prepared using Dex-SH with 7.5% and 33% thiol substitution and incubated in culture medium maintained their integrity for 11 and 13 d without cells and 22 ± 5 d and 37 ± 5 d with cells, respectively. ESCs formed compact colonies, which progressively increased in size over time due to cell proliferation as determined by confocal microscopy and PB staining. 3-D scaffold cultured ESCs expressed significantly higher levels (P < 0.01) of Oct4, Nanog, and Kl4, showing a 2.8, 3.0 and 1.8 fold increase, respectively, in comparison to 2-D grown cells. A similar increase in the protein expression levels of Oct4, Nanog, and Klf4 was observed in 3-D grown ESCs. However, when 3-D cultured ESCs were subsequently passaged in 2-D culture conditions, the level of these pluripotent markers was reduced to normal levels. 3-D grown ESCs produced teratomas and yielded cells of all three germ layers, expressing brachyury (mesoderm), NCAM (ectoderm), and GATA4 (endoderm) markers. Furthermore, these cells differentiated into osteogenic, chondrogenic, myogenic, and neural lineages expressing Col1, Col2, Myog, and Nestin, respectively.CONCLUSION: This novel 3-D culture system demonstrated long-term maintenance of mouse ESCs without the routine passaging and manipulation necessary for traditional 2-D cell propagation.     

Experimental silicification of the extremophilic Archaea Pyrococcus abyssi and Methanocaldococcus jannaschii: applications in the search for evidence of life in early Earth and extraterrestrial rocks

Hydrothermal activity was common on the early Earth and associated micro‐organisms would most likely have included thermophilic to hyperthermophilic species. 3.5–3.3 billion‐year‐old, hydrothermally influenced rocks contain silicified microbial mats and colonies that must have been bathed in warm to hot hydrothermal emanations. Could they represent thermophilic or hyperthermophilic micro‐organisms and if so, how were they preserved? We present the results of an experiment to silicify anaerobic, hyperthermophilic micro‐organisms from the Archaea Domain Pyrococcus abyssi and Methanocaldococcus jannaschii, that could have lived on the early Earth. The micro‐organisms were placed in a silica‐saturated medium for periods up to 1 year. Pyrococcus abyssi cells were fossilized but the M. jannaschii cells lysed naturally after the exponential growth phase, apart from a few cells and cell remains, and were not silicified although their extracellular polymeric substances were. In this first simulated fossilization of archaeal strains, our results suggest that differences between species have a strong influence on the potential for different micro‐organisms to be preserved by fossilization and that those found in the fossil record represent probably only a part of the original diversity. Our results have important consequences for biosignatures in hydrothermal or hydrothermally influenced deposits on Earth, as well as on early Mars, as environmental conditions were similar on the young terrestrial planets and traces of early Martian life may have been similarly preserved as silicified microfossils.