A radioimmunoprecipitation method in the serodiagnosis of HIV infection: the development of the optimal conditions for its performance and the evaluation of the possibilities for its use

The optimum conditions for using the method of radioimmunoprecipitation (RIP) for the detection of human immunodeficiency virus (HIV) in serum samples have been established. Out of several available cell lines persistently infected with HIV, specially selected line 17 has been chosen. The characteristic feature of this is the high and stable (under the conditions of prolonged cultivation) accumulation of virus-specific proteins in infected cells. The optimum conditions for making the test and its evaluation have also been established. The data of literature on the advantages of the method of RIP over such traditional methods as the enzyme immunoassay and immunoblotting have been confirmed. Thus, the presence of specific antibodies in several serum samples registered as false negative has been established. The intertypical reactivity of two serotypes of the virus, HIV-1 and HIV-2, has been studied. Cross reactivity of antibodies with respect to the HIV gene gag, but not with respect to viral glycoproteids, has been established. Ideas on the expediency and prospects of using RIP for the serological control of HIV infection are presented.     

Active‐Site Imprinting: Preparation of Fe–N–C Catalysts from Zinc Ion–Templated Ionothermal Nitrogen‐Doped Carbons

Atomically dispersed Fe–N–C catalysts are considered the most promising precious‐metal‐free alternative to state‐of‐the‐art Pt‐based oxygen reduction electrocatalysts for proton‐exchange membrane fuel cells. The exceptional progress in the field of research in the last ≈30 years is currently limited by the moderate active site density that can be obtained. Behind this stands the dilemma of metastability of the desired FeN₄ sites at the high temperatures that are believed to be a requirement for their formation. It is herein shown that Zn²⁺ ions can be utilized in the novel concept of active‐site imprinting based on a pyrolytic template ion reaction throughout the formation of nitrogen‐doped carbons. As obtained atomically dispersed Zn–N–Cs comprising ZnN₄ sites as well as metal‐free N₄ sites can be utilized for the coordination of Fe²⁺ and Fe³⁺ ions to form atomically dispersed Fe–N–C with Fe loadings as high as 3.12 wt%. The Fe–N–Cs are active electocatalysts for the oxygen reduction reaction in acidic media with an onset potential of E₀ = 0.85 V versus RHE in 0.1 m HClO₄. Identical location atomic resolution transmission electron microscopy imaging, as well as in situ electrochemical flow cell coupled to inductively coupled plasma mass spectrometry measurements, is employed to directly prove the concept of the active‐site imprinting approach.     

Insect pest management in the age of synthetic biology

Arthropod crop pests are responsible for 20% of global annual crop losses, a figure predicted to increase in a changing climate where the ranges of numerous species are projected to expand. At the same time, many insect species are beneficial, acting as pollinators and predators of pest species. For thousands of years, humans have used increasingly sophisticated chemical formulations to control insect pests but, as the scale of agriculture expanded to meet the needs of the global population, concerns about the negative impacts of agricultural practices on biodiversity have grown. While biological solutions, such as biological control agents and pheromones, have previously had relatively minor roles in pest management, biotechnology has opened the door to numerous new approaches for controlling insect pests. In this review, we look at how advances in synthetic biology and biotechnology are providing new options for pest control. We discuss emerging technologies for engineering resistant crops and insect populations and examine advances in biomanufacturing that are enabling the production of new products for pest control.     

Response and inbreeding from a genomic selection experiment in layer chickens

Background

Genomic selection (GS) using estimated breeding values (GS-EBV) based on dense marker data is a promising approach for genetic improvement. A simulation study was undertaken to illustrate the opportunities offered by GS for designing breeding programs. It consisted of a selection program for a sex-limited trait in layer chickens, which was developed by deterministic predictions under different scenarios. Later, one of the possible schemes was implemented in a real population of layer chicken.

Methods

In the simulation, the aim was to double the response to selection per year by reducing the generation interval by 50 %, while maintaining the same rate of inbreeding per year. We found that GS with retraining could achieve the set objectives while requiring 75 % fewer reared birds and 82 % fewer phenotyped birds per year. A multi-trait GS scenario was subsequently implemented in a real population of brown egg laying hens. The population was split into two sub-lines, one was submitted to conventional phenotypic selection, and one was selected based on genomic prediction. At the end of the 3-year experiment, the two sub-lines were compared for multiple performance traits that are relevant for commercial egg production.

Results

Birds that were selected based on genomic prediction outperformed those that were submitted to conventional selection for most of the 16 traits that were included in the index used for selection. However, although the two programs were designed to achieve the same rate of inbreeding per year, the realized inbreeding per year assessed from pedigree was higher in the genomic selected line than in the conventionally selected line.

Conclusions

The results demonstrate that GS is a promising alternative to conventional breeding for genetic improvement of layer chickens.     

Metabolic and evolutionary engineering research in Turkey and beyond

This review discusses metabolic engineering research with an emphasis on evolutionary (whole cell and protein) engineering, which is an inverse metabolic engineering approach. For each section on metabolic, inverse metabolic and evolutionary engineering research, a general review of the major global studies in the literature is made and research examples from Turkey are given and discussed. It is expected that with the rapid development in systems biology and the novel powerful analytical technologies to identify the genetic basis of cellular phenotypes, metabolic and evolutionary engineering research will become widespread and increasingly important in Turkey, following global scientific trends.     

Isolation of cobalt hyper-resistant mutants of Saccharomyces cerevisiae by in vivo evolutionary engineering approach

Cobalt is an important element with magnetic properties used in various industrial applications, but is also needed for biological activity. Very little is known about the cellular response of living systems to cobalt stress. Towards investigating this mechanism, we isolated individual Saccharomyces cerevisiae cells resistant to high cobalt concentrations up to 8 mmol l⁻¹, by employing four different ‘in vivo’ evolutionary engineering strategies: selection under constant or gradually increasing stress levels, and selection under continuous or pulse exposure to cobalt stress. Selection under continuous exposure to gradually increasing cobalt stress levels yielded the most resistant cell population to cobalt. However, the resistance was highly heterogeneous within the mutant populations ranging from 3- to 3700-fold survival rate of isolated individuals to 8 mmol l⁻¹ CoCl₂ in the most resistant population. Moreover, cobalt-resistant individual colonies were associated with 2–4-times lower intracellular cobalt contents as compared to wild-type, and with cross-resistance to metals such as nickel, zinc, manganese, but not to copper and chromium ions. Contrary to mutants evolved under continuous exposure to cobalt, those isolated by pulse exposure strategy also exhibited resistance to heat shock and hydrogen peroxide stress. Taken together, this study reinforced the fact that evolutionary engineering is useful in selecting strains with very specific phenotypes, and further illustrated the importance of the strategy chosen to isolate the best evolved strain.     

Links between plant and fungal communities across a deforestation chronosequence in the Amazon rainforest

Understanding the interactions among microbial communities, plant communities and soil properties following deforestation could provide insights into the long-term effects of land-use change on ecosystem functions, and may help identify approaches that promote the recovery of degraded sites. We combined high-throughput sequencing of fungal rDNA and molecular barcoding of plant roots to estimate fungal and plant community composition in soil sampled across a chronosequence of deforestation. We found significant effects of land-use change on fungal community composition, which was more closely correlated to plant community composition than to changes in soil properties or geographic distance, providing evidence for strong links between above- and below-ground communities in tropical forests.     

Identification of the human cortactin-binding protein-2 gene from the autism candidate region at 7q31.

Human chromosome 7q31 contains putative susceptibility loci for autism (AUTS1) and speech and language disorder (SPCH1). We report here the identification and characterization of a novel gene encoding cortactin-binding protein-2 (CORTBP2), which is located 45 kb telomeric to the cystic fibrosis transmembrane conductance regulator gene (CFTR) at 7q31.3. The full-length (5975-bp) gene was isolated and found to be composed of 23 exons encompassing 170 kb of DNA. In addition to being a positional candidate for AUTS1, CORTBP2 was expressed at highest levels in the brain, as shown by northern blot analysis. Subsequent mutation analysis of CORTBP2 in 90 autistic patients identified two polymorphisms, including a leucine to valine change caused by a T to G substitution in exon 15. However, comparison of allele frequencies between autistic and control populations (n=96) showed no significant difference, suggesting that this variant is not a susceptibility factor for autism.     

Ethanol gastric lesion aggravated by lung injury in rat. Therapy effect of antiulcer agents.

Hemorrhagic mucosal lesions in the stomach in the rat induced by an intragastrical application of 1 ml of 50 or 75% ethanol were aggravated by preceding lung damage provoked by an intratracheal instillation of pyrogen-free saline or HCl (pH 1.75) or 50-h exposure to 100% oxygen. Due to the particular preceding aggravating circumstances, these lesions were taken to be of a special kind, rather than ordinary. So far, it is not known whether and how antiulcer agents may influence these lesions. Rats received an intratracheal (i.t.) HCl instillation [1.5 ml/kg HCl (pH 1.75)] (lung-lesion), and an intragastric instillation of 96% ethanol (gastric lesion; 1 ml/rat, 24 h after i.t. HCl instillation), and were sacrificed 1 h after ethanol. Basically, in lung injured rats, the subsequent ethanol-gastric lesion was markedly aggravated. This aggravation, however, in turn, did not affect the severity of the lung lesions in the further period, at least for a 1-h observation. Taking intratracheal HCl-instillation as time 0, a gastric pentadecapeptide, GEPPPGKPADDAGLV, M.W.1419, coded BPC 157 (PL-10, PLD-116; 10 microg, 10 ng, 10 pg), ranitidine (10 mg), atropine (10 mg), omeprazole (10 mg), were given [/kg, intraperitoneally (i.p.)] (1) once, only prophylactically [as a pre-treatment (at -1 h), or as a co-treatment (at 0)], or only therapeutically (at +18 h or +24 h); (2) repeatedly, combining prophylactic/therapeutic regimens [(-1 h)+(+24 h) or (0)+(+24 h)], or therapeutic/therapeutic regimens [(+18 h)+(+24 h)]. In general, the antiulcer agents did protect against ethanol gastric lesions regardless of the presence of the severe lung injury, in all of the used regimens. Of note, combining their prophylactic and salutary regimens (at -1 h/+24 h, or at 0/+24 h) may increase the antiulcer potential, and the effect that had been not seen already with single application, became prominent after repeated treatment.